Used Bodor T2-65-3000W for sale (9,696)

Condition: like new (used), Year of construction: 2012, round bar steel 45 mm square edge steel 45 mm L-beam 120 x120 x 12 mm total power requirement 5,5 kW weight of the machine ca. 1600 kg dimensions of the machine ca. 1700 x 950 x 1900 m Djdpfjy Hxq Iox Aa Hjkt

Condition: not inspected (used), total length: 250 mm, total width: 110 mm, total height: 128 mm, Generator set, identified as H1306 and rated at 65 kVA, equipped with an Iveco 8041 engine. Specifications: Identification: H1306 Power: 65 kVA Engine: Iveco 8041 Design: enclosed in a frame Number: H1306 External dimensions: approx. 250x110x128 cm Dodpfx Aaozzay Dj Hokt Condition: used Note: The generator set has been idle for an extended period; for example, it is missing a 400 V connection/the electrical box is open (see photo). Furthermore, its operational status and condition are unknown.

Year of construction: 2013, operating hours: 7,700 h, condition: repair required (used), functionality: limited functionality, machine/vehicle number: 12090, This is a recycling extruder with side feeding for materials (flakes, pellets, etc.). The system is supplied with a control cabinet and a double vacuum system. The pelletizing system is missing at the end of the screw – it is not included in the scope of supply. The cylinder ends at the flange. The extruder is supplied without a screw. The frequency inverter for the main motor was replaced with a new unit 3 years ago. Installed power approx.: 474 kW Cooling water requirement approx.: 190 l/min Fresh water consumption approx.: 110 l/h Feeding system: • Diameter of the feeding screw: 200 mm • Drive for the feeding screw: 45 kW, frequency-controlled • Hopper capacity net 7 m³/250 ft³, • Gear motor 3 × 3 kW Dsdpfoznz Ezsx Aa Hjkt • 2 sight glasses in the hopper • 2 level indicators Extruder: • Diameter of the extruder screw: 145 mm • L/D ratio: 24 • Heating power: 50 kW • Extruder drive unit 280 kW Vacuum 1: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 11 kW • Vacuum capacity: 225 m³/h • Vacuum pressure: 33 mbar Vacuum 2: • Screw length: 16 L/D • Heating power: 40 kW • Vacuum pump power: 7.5 kW • Vacuum capacity: 190 m³/h • Vacuum pressure: 33 mbar Cylinder: • Cylinder: Bimetal extruder cylinder, • Reinforcement layer 1.8–2.0 mm thick, • Hardness 63–65 HRC Installation conditions: • Voltage: 3 × 400 Volts • Permissible fluctuation max.: +5 % – 5 % • Frequency: 50 Hz Permissible fluctuation max.: +4 % – 4 % • Protective measure: Multiple grounding • Ambient temperature: min. 15 °C, max. 35 °C • Humidity max.: 90 % • Altitude of the installation site: 0 – 1000 m The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production facility in Europe. The details for optimal transport need to be clarified. The machine price is without packaging.

Condition: used, axle configuration: 3 axles, first registration: 02/2005, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Air Suspension - Disc brakes Dkodpfx Aozzlutoa Het = More information = Tyre size: 385/65 Make axles: Mercedes Brakes: disc brakes Suspension: air suspension Rear axle 1: Tyre profile: 40% Rear axle 2: Tyre profile: 30% Rear axle 3: Tyre profile: 30%

Condition: used, Year of construction: 1972, Second-hand machine Year of manufacture: 1972 Features and technical specifications: - Pressing surface 2500 x 1100 mm - Total pressing force: 650 kN - Opening width: 400 mm - Number/diameter of cylinders: 4/80 mm - Operating pressure: 325 bar - Closing time: approx. 16 sec. - Panel type: aluminium / natural - Thickness: approx. 51 mm Dedpfszk N U Nox Aa Hskt - Power rating per heating plate: approx. 6.8 kW - Heating-up time to 90°C: approx. 16 mins. - Dimensions: 2900 x 1300 x 2050 mm - Weight: approx. 2,900 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: new, Year of construction: 2026, CORMAK PT265 230V Planer Thicknesser – Advanced Compact Woodworking Machine The CORMAK PT265 230V planer thicknesser in its new version is a technologically advanced woodworking machine designed for users who require precision, efficiency, and a compact design with single-phase power supply. This multifunctional machine combines the functions of a surface planer and thickness planer, offering improved machining accuracy thanks to an innovative synchronized table system. It is a professional solution for craft workshops, carpentry shops, and demanding hobby users working with both hardwood and softwood. Main advantages of the machine New integrated working table system – simultaneous adjustment of the infeed and outfeed tables eliminates the need for separate calibration and improves machining accuracy. Stable and heavy-duty construction – a 170 kg machine weight and wide cast iron working tables reduce vibrations and increase operator safety. Powerful 2.6 kW (S6) motor – additional power reserve enables efficient processing of demanding and hard wood species. Quick function conversion – easy switching from surface planer mode to thickness planer mode thanks to a simple table lifting and dust extraction cover system. Dkodpfxewu T S Ae Aa Hst 230V power supply – allows operation in workshops without access to a three-phase electrical installation. Construction and technology The CORMAK PT265 planer thicknesser is equipped with a modernized working table system operating synchronously and maintaining the set working plane. This eliminates common problems found in older machine designs, such as level differences between tables that may cause machining inaccuracies. The three-knife cutter block with a 75 mm diameter, rotating at 4000 rpm, ensures excellent surface quality and precise material processing. The 700 × 150 mm aluminium fence with angle scale allows accurate adjustment from 90° to 45°, increasing the versatility of the machine for various woodworking applications. Precision and working efficiency Thanks to precise height adjustment with a clear graduated scale and the centrally mounted thicknessing table on a rigid column, the CORMAK PT265 wood planer thicknesser provides stable and repeatable operation. The machine offers a maximum cutting depth of 3 mm and a feed speed of 6 m/min, allowing fast and efficient processing. Standard equipment Ø75 mm cutter block with three knives Modern synchronized cast iron working tables, precision-ground Aluminium guide fence 700 × 150 mm with angle scale Ø100 mm dust extraction outlet for chip extraction connection Quick conversion system between surface planer and thickness planer functions Operating manual (DTR) CE Declaration of Conformity Technical specifications Cutter block diameter 75 mm Cutter block speed 4000 rpm Dust extraction outlet diameter 100 mm Fence tilt angle 90°–45° Number of knives 3 Cutter block length 262 mm Knife dimensions 250 × 25 × 3 mm Maximum planing width 265 mm Maximum thicknessing width 265 mm Maximum thicknessing height 180 mm Maximum thicknessing cutting depth 3 mm Maximum surface planing cutting depth 2.5 mm Thicknessing feed speed 6 m/min Fence dimensions 700 × 150 mm Machine dimensions (L × W × H) 1080 × 269 × 1000 mm Weight 170 kg Motor power S6: 2.6 kW Power supply 230 V Operating manual (DTR) Yes CE Declaration Yes

Condition: new, Year of construction: 2025, Model: K110 K230 K360 Working Area: from 8649×1398×1811mm to 10000×3500×2100mm Laser Output Power: 3000w/2000w/1500w/1000w X/Y-axis positioning accuracy: 0.05mm X/Y-axis repositioning accuracy: 0.03mm X/Y-axis Max. linkage speed: 60m/min 1. Integrated full protection cover Integrated full protection cover design, installing in place, greatly reducing installation time. 2. Bodor Genius T needle nose auto-focusing laser head Bodor Genius T needle nose auto-focusing laser head, applicable for all kinds of tubes such as angle steel, channel steel, I-beam, etc. Dksdpfeg D Ntqox Aa Het 3. Rectangular Tube Welded Bed Simple structure and flexible layout. 4. Bodor Thinker 3.0 System The dedicated control system of tube cutting machine integrated with the most advanced technology, can cut angle steel and channel steel directly without nesting and returning home. 5. Applicable to smaller clamping diameter The rear jaws can clamp the pipe to go through the front chuck, which greatly shortens the physical distance between the cutting head and the rear chuck jaws. Tail length is reduced to 70mm and the material utilization rate is increased to 99%. 6. Ergonomics Loading and operating on both sides; and humanized interaction interface, convenient and smooth operation, and favorable user experience. 7. Integrated design Integrated design of electric control cabinet and main body, saving the space occupied, standardizing the line installation.

Condition: used, Year of construction: 2010, Year of manufacture: Nov 2010 Dkedpsxvx Ipsfx Aa Hot GOODYEAR TIRES IN GOOD CONDITION FOR MEGA OR LOWLOADER.

Condition: ready for operation (used), STC Super 65 Bar feeder Bar Loader Turn diameter bed: mm Turn diameter support: mm Passage: 1-65mm Turning length: 1500mm X-axis: mm Y-axis: mm Z-axis: mm Turning speed: - Rev/min Cone: Longitudinal displacement drilling head (X axis): mm Arm travel height (Y axis): mm Min distance column -- drilling spindle (X axis): mm Max distance column -- drilling spindle (X axis): mm Spindle diameter: mm Max drilling depth: mm Max drilling depth: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Steering: Year built: 2016 Operating hours: Transportation dimensions: 215x105x120 cm (LxWxH) Location: Hamont-Achel, Belgium The seller is not liable for typographical or data transmission errors. The machine is consistent with age in appearance, technology and wear; used machines are sold without warranty. The price shown does not include VAT Dodpfxjurna Hs Aa Hskt STC Super 65 Bar feeder Bar Loader Bed turning diameter: mm Support turning diameter: mm Throughput: 1-65 mm Turning length: 1500mm X-axis: mm Y-axis: mm Z-axis: mm Speed: Rpm Taper: Drill head longitudinal displacement (X-axis): mm Arm height displacement (Y-axis): mm Min distance column -- drill spindle (X-axis): mm Max distance column -- drill spindle (X-axis): mm Spindle diameter: mm Max drilling depth: mm Max clamping: x mm Bed dimensions: x mm Cutting length: mm Cutting thickness: mm Control: Year of construction: 2016 Operating hours: Transport dimensions: 215x105x120 cm (LxWxH) Location: Hamont-Achel, Belgium The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear in accordance with its age; used machines are sold without warranty. The price shown is exclusive of VAT STC Super 65 Stangenlader Bettdrehdurchmesser: mm Drehdurchmesserunterstützung: mm Opening range: 1-65 mm Drehlänge: 1500 mm X axis: mm Y-axis: mm Z-axis: mm Speed: - U/min Cone: Längsverschiebung des Bohrkopfes (X-Achse): mm Armhöhenverschiebung (Y axis): mm Min. Distance between sleeve and drilling spindle (X axis): mm Maximal distance between sleeve and drilling spindle (X axis): mm Spindle diameter: mm Max. Drilling depth: mm Maximal machining wall: x mm Bettmaße: x mm Schnittlänge: mm Schnittstärke: mm Kontrollen: Baujahr: 2016 Betriebszeiten: Transportmaße: 215x105x120 cm (LxWxH) Standort: Hamont-Achel, Belgium Der Verkäufer haftet nicht für Tipp- oder Datenübertragungsfehler. Die Maschine ist optisch, technisch und gebrauchstechnisch ihrem Alter entsprechend; Gebrauchtmaschinen werden ohne Gewährleistung verkauft. Der angezeigte Preis versteht sich exklusive Mehrwertsteuer

Condition: new, functionality: limited functionality, Year of construction: 2026, Reliable performance in extreme cold and heat: The Laserschweißgerät 1500 Pro from bodor A strong indicator of its durability is the Pro 1500’s ability to maintain stable performance under stringent laboratory conditions at temperatures ranging from -20°C to 60°C and up to 90% relative humidity. Furthermore, the laser welding machine ensures consistent welding quality for a wide variety of metal welding applications. Self-Cooling Function The key to self-cooling lies in Bodor’s constant temperature circulation technology. The recyclable coolant absorbs excess heat within the system and dissipates it externally via the heat sink. This ability to withstand temperature fluctuations and high humidity has been confirmed in laboratory tests over 10,000 hours. Intelligent Welding Process Support Give your welding process an extra boost with intelligent features. The Bodor Welding Process Database includes welding parameters for steel from 1 to 4 mm, specifically for flat and fillet welds. Serving as a guide for beginners, the laser welding machine enables users with varying levels of expertise to weld effortlessly. Intelligent Control Knob Dkodpezcvydofx Aa Het The laser welding machine’s control knob is easy to navigate. Users can manage their welding solutions in a single environment. They can select the welding process and adjust the welding parameters (e.g., power, weld bead width, frequency, etc.), and the knob automatically saves custom parameters for future operations. Portable Design, Integrated Energy Structure Without built-in water tanks or cooling fans, the Laserschweißgerät Pro 1500 occupies an area of 0.24㎡. This compact machine is designed to assist users with complex welding tasks in various working environments. A set of Bodor welding nozzles is also included, catering to all requirements. Specifications & Parameters Laser output power 1500W Max. material thickness 5mm steel, 4mm aluminum Length of fiber optic cable 10m Total weight 65kg Cooling method Self-Cooling Dimensions 850x420x570 Laser output Continuous Operating temperature -20°C – +60°C

Condition: like new (used), Year of construction: 2009, functionality: fully functional, operating hours: 4,000 h, input voltage: 380 V, input current: 80 A, input frequency: 50 Hz, type of input current: DC, pressing force: 160 t, stroke length: 150 mm, operating speed: 50 mm/s, reverse speed: 10 mm/s, table width: 1,300 mm, table length: 2,500 mm, table height: 150 mm, throat depth: 1,300 mm, ram plate width: 1,300 mm, ram plate length: 2,500 mm, distance table to ram: 200 mm, clearance between the columns: 2,500 mm, retraction force: 100 t, oil tank capacity: 50 l, total length: 3,500 mm, total width: 4,500 mm, total height: 2,300 mm, overall weight: 6,000 kg, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, We offer this Dimter Profitest 2500 gluing press in like-new condition, manufactured in 2009. Manufacturer: Dimter Model: Profitest 2500 Dsdpszin Aiefx Aa Hokt Year of manufacture: 2009 Condition: like new Type: gluing press If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 06/2027, loading space volume: 65 m³, total width: 2,550 mm, total height: 3,670 mm, Year of construction: 2020, Equipment: ABS, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle, subject to final sale, errors, typographical errors, and prior sale: Reisch 65 cbm Sliding Floor Trailer (Vehicle 674) First registered: 06/03/2020 Type: RSBS-3-10/C3V Permissible gross vehicle weight: 39,000 kg Unladen weight: 6,000 kg Payload: 33,000 kg Overall length: 11,000 mm Overall width: 2,550 mm Overall height: 3,670 mm Load volume: approx. 65 cbm TÜV (technical inspection) valid until: 06/2027, main inspection valid until: 12/2026 Roll-up tarpaulin, platform Clean floor, end pieces, sides, reinforced rear walls Dkedpfxozful Ne Aa Hst Portal doors 1/2 and 1/2 at the rear, grain sliding hatch Remote control Cargo floor LED work lights + reversing lights 2 x 12-tonne, 2-speed geared winch Shovel and broom holder on the driver’s side, front Storage box, plastic, driver’s side, center Air suspension with raising and lowering function 1st lift BPW drum brakes Tires: 385/65R22.5, 1st tire approx. 70/80%, 2nd tire approx. 80/90%, 3rd tire approx. 60/60% ALCOA aluminum rims Extension ladder on the passenger side, rear Ladder behind the fifth wheel Half-shell fenders Price: €23,000.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Subject to errors, typographical errors, and prior sale.

Condition: used, Year of construction: 2011, Technical details: weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. Djdpfxsyz Sdqj Aa Hokt *

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 918106, turning diameter over cross slide: 500 mm, turning length: 560 mm, turning diameter: 420 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 600 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, rotational speed (min.): 40 rpm, rotational speed (max.): 4,000 rpm, total height: 2,260 mm, total length: 3,430 mm, total width: 1,810 mm, feed length X-axis: 230 mm, feed length Y-axis: 110 mm, feed length Z-axis: 600 mm, swing diameter over cross slide: 500 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 20 m/min, turning diameter over bed slide: 650 mm, workpiece weight (max.): 230 kg, turning diameter over top slide: 500 mm, type of input current: three-phase, torque: 287 Nm, overall weight: 5,800 kg, swing diameter over bed slide: 650 mm, bar passage: 65 mm, chuck outer diameter: 250 mm, center width: 560 mm, spindle nose: A2-8, bar diameter (max.): 65 mm, Equipment: rotational speed infinitely variable, 🔹 FOR SALE: 2006 Goodway GS-260MYS CNC Lathe – Very Good Condition – Ireland 🔹 Make: Goodway Model: GS-260MYS Year: 2006 Control: Fanuc Series 18i-TB Machine Type: CNC Turning Centre with Sub Spindle, Driven Tools, Y Axis & C Axis Condition: Very Good Location: Ireland Availability: Immediately available 📌 Description: For sale is a 2006 Goodway GS-260MYS CNC Lathe, a powerful multi-axis CNC turning centre equipped with live tooling, Y-axis milling, and a sub spindle. This robust machine is ideal for complex turning and milling operations in a single setup — perfect for modern precision engineering environments. Maintained in very good working condition, it includes a selection of manual and driven tool holders, 2 chucks, and a swarf conveyor. 🔧 Technical Specifications: Main Spindle: Chuck Size: 10" (250 mm) Bar Capacity: 65 mm Spindle Nose: A2-8 Max Swing: 650 mm Swing Over Saddle: 500 mm Max Turning Diameter: 420 mm Standard Turning Diameter: 205 mm Max Turning Length: 560 mm Max Part Weight: 230 kg Hole Through Drawtube: 65.5 mm Hole Through Spindle: 76 mm Spindle Drive: Direct Belt Drive Spindle Speeds: 40 – 4,000 rpm Continuous Spindle Motor: 11 kW 30-Min Spindle Motor: 15 kW Spindle Torque (Cont.): 210 Nm Spindle Torque (30 Min): 287 Nm Axes: X Axis Travel: 230 mm Z Axis Travel: 600 mm Y Axis Travel: ±55 mm X/Z Rapid Traverse: 20 m/min Z2 Axis Travel (Sub Spindle): 600 mm Z2 Rapid Traverse: 24 m/min Tooling: Turret Stations: 12 Dkodpewtpdfefx Aa Hjt OD Tool Shank Size: 25 mm ID Tool Shank Size: Up to 40 mm Live Tooling Stations: 12 Live Tool Drive Motor: 4.5 kW Live Tool Torque: 22 Nm Sub Spindle: Chuck Size: 6" Spindle Nose: A2-5 Hole Through Spindle: 46 mm Continuous Motor Output: 5.5 kW 30-Min Motor Output: 7.5 kW Spindle Speed Range: 60 – 6,000 rpm Drive: Built-in Motor Construction: Slideways: Hardened & Ground Box Ways Machine Dimensions: 3430 x 1810 x 2260 mm Machine Weight: 5,800 kg 🧰 Included with the Machine: Selection of Driven Tool Holders Selection of Manual Tool Holders 2x Chucks Swarf Conveyor Note: Tools shown in photos are not included – only the holders are provided. 🛠 Suitable For: Precision turning, mill-turn applications, production of complex components in aerospace, medical, automotive, and general engineering sectors. Used CNC Lathe Ireland, Goodway GS-260MYS for Sale, CNC Lathe with Y Axis and Sub Spindle, Live Tool CNC Turning Centre, CNC Turning Machine Europe, Fanuc CNC Lathe for Sale, Multi-Axis Lathe Machine Used Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, Year of construction: 2013, x-travel 735 mm y-travel 650 mm z-travel 560 mm control 840D sl FD operate Siemens turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 35 / 24 kW max. Torque 119 Nm tool taper HSK-A63 DIN 69893 table diameter 680 mm max. table load 600 kg max. workpiece sizes 650 x 650 x 500 mm swivellable +/- 120 ° rotatable 360 ° number of toolpositions 30 pos. tool taper HSK-A63 max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8,0 kg change-time chip to chip ca. 4,9 sec feed speeds max. 40.000 mm/min rapid traverse 40 m/min total power requirement 65 kVA weight of the machine ca. 11,6 t dimensions of the machine ca. 4,0 x 3,0 x 2,95 m 5 Axis CNC - MachiningCenter Universal DMG - DMU 65 FD monoBLOCK Dkodpfx Aaszipzyj Hjt - Swivel-Rotary-Table - without tools - only 8,444 operating hours - only 2,246 spindle hours - Air blast cooling through spindle center - MDynamics package - Power failure safety package - Coolant ring jet: 7x air jets, 13x water jets - Tropical package (35° – 50° Celsius) - Coolant unit (ICS) with two pressure levels: 40 and 80 bar - Use of special tools (18 kg / 370 mm)

Condition: used, Year of construction: 2006, Contura Matic T2 contour measuring machine, manufactured in 2006. Dkedpfxjzu At Hj Aa Hst

Condition: new, Year of construction: 2025, Airtech Stickstoff has been representing Bodor Laser in Germany for several years. Our experienced team of service technicians installs the machines and provides training in German. Are you interested in our laser cutting machines? We look forward to your inquiry... Djdpfxohk E Dvs Aa Hjkt

Condition: used, Year of construction: 2000, functionality: limited functionality, machine/vehicle number: 1501, total width: 3,000 mm, total height: 2,700 mm, total length: 21,000 mm, overall weight: 4,000 kg, space requirement width: 5,000 mm, Used ASCOT BRICMATIC 1-65/150 briquetting press, manufactured in 2000. This unit features a triple production line configuration, designed for the efficient industrial compaction of wood residues, sawdust, and shavings into high-density biomass briquettes. It is a robust and reliable solution for woodworking plants and biomass production facilities. The machine is currently partially disassembled in our warehouse. Dsdpfx Aaszxyd Ro Hjkt

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Dksdpfx Aasxizano Hot

Condition: new, mileage: 70 km, power: 140 kW (190.35 HP), overall weight: 7,490 kg, fuel type: diesel, color: white, gearing type: automatic, total width: 2,150 mm, total height: 2,265 mm, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, The ISUZU ? Commercial Vehicle Center in Germany with expertise, service, and advice offers you: ISUZU M30 F RIGHT-HAND DRIVE with automated transmission + torque converter Chassis Wheelbase 2,765 mm or 3,365 mm Net / export price: €51,550.00 2-year warranty on the base vehicle from the date of initial registration or up to 100,000 km Dkodsynpufspfx Aa Hst Standard equipment: - 5.2L turbo diesel with common rail direct injection, 140 kW / 190 hp, EURO VI OBD-E (max. torque 510 Nm at 1,600–2,800 rpm) - Particulate filter system with DPD and AdBlue (the self-cleaning system allows filter regeneration without a workshop visit, thanks to the new DPD regeneration technology, which indicates when the function is required. Just press the DPD button and the system self-cleans in 20 minutes) - Automated transmission (NEES II) with 6 speeds and torque converter, including cruise control. Wear-free and finely controlled starting is made possible by the integrated fluid coupling! Gears can also be shifted manually on the selector lever. Depending on vehicle load, the driver can preselect via switch whether the vehicle should start in 1st or 2nd gear. - Leaf suspension front axle (max. 3,100 kg), leaf suspension rear axle (max. 5,800 kg), stabilizer front and rear - 215/75 R17.5 C tires, single tires front - Twin tires on driven rear axle, spare wheel - Front and rear ventilated disc brakes - Cruise control, speed limiter (90 km/h) - Engine brake - Electric parking brake with Auto Hold HSA - On-board voltage 24 V, generator 90A, 2x battery 90 Ah - Diesel tank 100 L / AdBlue tank 16 L - New and modern cab with excellent space utilization, generous headroom, ample knee space, outstanding ergonomics and visibility, low entry height - For optimal night visibility: BI-LED lighting with headlight washers and LED rear lights - Double door seals reduce noise transmission into the cabin, supporting pleasant interior acoustics - Cigarette lighter, cup holder, storage compartments in door panels and roof lining, door armrests - Cab paint: Arc White 729 - Vehicle dimensions: cab width 2,040 mm, rear axle width 2,115 mm, cab height 2,265 mm (top of cab), chassis height 800 mm, chassis width 850 mm - Right-hand drive configuration - Suspended driver's seat - Double passenger bench seat, 3-seater, head restraints, seatbelt warning - Driver and passenger airbags, seatbelt tensioners for driver and passenger - Height and tilt adjustable steering wheel, interior mirror - Electric windows - Electrically adjustable and heated exterior mirrors - Electronic immobilizer - Double-DIN DAB+ radio 6.8” with Bluetooth hands-free, Apple CarPlay / Android Auto compatible, USB charging port - 7” driver information display - Steering wheel controls - Fog lights, daytime running lights, automatic lighting - Reverse warning signal - Central locking with remote control - Manual air conditioning - Digital EU tachograph Safety Pack 2 equipment: - ABS: Anti-lock braking system - ASR: Traction control for the rear axle - EBD: Electronic brake force distribution - EVSC: Electronic stability control - LDWS: Lane departure warning system - MOIS: Moving object detection - DWS: Distance warning system - MAM: Emergency braking for obstacles - FVSN: Forward scene recognition - DDAW: Drowsiness detection system - TSR: Traffic sign recognition - TPMS: Tire

Condition: used, mileage: 431,439 km, power: 219 kW (297.76 HP), first registration: 08/2012, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 5,400 mm, fuel: diesel, fuel tank capacity: 430 l, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 3, total length: 9,900 mm, total width: 2,600 mm, permissible axle load (axle 1): 7,300 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,600 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, Year of construction: 2012, Equipment: air conditioning, tail-lift, = Additional Options and Accessories = - Aluminum fuel tank - Air suspension - Parabolic spring suspension - Side door - Sun visor = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 6,693 cc Axle Configuration Brakes: Disc brakes Front axle: Tire size: 315/70R22.5; Max. axle load: 7300 kg; Steerable; Suspension: Parabolic spring suspension Dkedpfx Aaezy Hivj Hot Rear axle: Tire size: 305/70R22.5; Twin tires; Max. axle load: 11,500 kg; Reduction: single reduction; Suspension: Air suspension Weights Unladen weight: 10,060 kg Payload: 8,740 kg GVWR: 18,800 kg Functional Features Tail lift: Dhollandia DHLM.30, tailgate, 2000 kg Body manufacturer: SOR SP33 Loading platform height: 125 cm Refrigeration engine: Diesel Identification License plate: 49-BBD-4 Additional Information Please contact Maurits Van Giessen for further information.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Closing force: 635 kN Operating pressure: 206 bar Piston diameter: 200 mm Stroke: 140 mm Daylight height: 150/180 mm Heating plate dimensions: 250 x 300 mm Max. weight of the heating plates: 70 kg Oil tank: 100 l Rated power: 19.66 kW Heating power: 9.6 kW Vacuum motor power: 2.6 kW Light barrier, distance to the tool area: 270 mm Stroke of the vacuum cover: 140 mm Dimensions: 2,650 x 2,100 x 2,100 mm Dksdpezynz Hjfx Aa Hjt The vulcanizing press from the manufacturer PAN STONE, type S-V-65-2RT-PCD, was used by a renowned German company in the sealing technology and electromobility sector. This company is known for its high quality and innovation in sealing production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its very good condition. This press offers you the opportunity to invest in a proven technology that has been used by a leading company in Germany.

Condition: used, Year of construction: 2008, bar material dia. 65 mm turning speeds 5.000 min-1 Number of working hours 34979 h spindle hours 72260 h control FANUC 310 i weight of the machine ca. 8800 kg dimensions of the machine ca. 4500x1990x2300 mm Number of controlled spindles (C axes): 2 Number of controlled axes: 8 Number of channels: 3 Max. bar diameter: 65 mm Bore in tie rod: 75 mm Chuck diameter: 175 mm Spindle nose: 140 mm Max. speed: 5,000 rpm Nominal torque: 191 Nm Nominal power: 20 kW DATA FOR THE W2 AXIS OF THE COUNTER SPINDLE Stroke: 690 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 2,400 N X1 AXIS DATA Stroke: 165 mm Rapid traverse: 40 m/min Max. acceleration: 10 m/s² Nominal force: 2,400 N Z1 AXIS DATA Stroke: 678 mm Rapid traverse: 30 mm Max. acceleration: 5 m/s² Nominal force: 5,000 N Y1 AXIS DATA Stroke: 80(+50/-30) mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N X2 AXIS DATA Stroke: 165 mm Rapid traverse: 30 m/min Max. acceleration: 5 m/s² Nominal force: 5,000 N Number of tool stations: 12 Tool holder diameter: 30 mm Driven stations: 12 mm Max. speed of driven tools: 4,000 rpm Translated with (free version) Djdjyat Hvepfx Aa Hjkt

Condition: new, Year of construction: 2026, table length 3048 mm table width 1524 mm burner heads 1 Control CNC workpiece weight 1095 kg traversing speed 180 m/min weight 4150 kg dimensions of the machine ca. 9392 x 2232 x 2307 mm Laser cutting system with automatic shuttle table configuration 1. Bodor Power 12kW laser source 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. mortise-and-tenon nameplate welded segmented bed 5. stretched aluminum gantry 6. bodor servo motor and driver 7. bodor rack and pinion 8. one-click processing 9. bodor lightning perforation technology Djdpfx Ajx I Sgloa Hokt 10. expert database for high-speed cutting 11. automatic adjustment of cutting gas pressure 12. open door protection 13. alarm function for cutting malfunction 14. ergonomic remote control (Bodor Mango®) 15. active anti-collision function 16. intelligent anti-shake 17. gas-saving continuous flow nozzle 18. intelligent maintenance reminder 19. WIFI internet connection 20. water cooler 21. extraction system 22. wear parts set CUTTING CAPACITY: CARBON STEEL (mm) 35 STAINLESS STEEL (mm) 35 ALUMINIUM (mm) 25 OPTIONAL: LANTEK EXPERT II CUT Sotware incl. postprocessor

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 06/2027, loading space volume: 65 m³, total width: 2,550 mm, total height: 3,670 mm, Year of construction: 2020, Equipment: ABS, In accordance with our “General Terms and Conditions”, without any guarantee or warranty, we can offer you the following vehicle, subject to prior sale, errors, and omissions: Reisch 65 cbm sliding floor trailer (Vehicle 675) First registration: 03.06.2020 Type: RSBS-3-10/C3V Permissible gross vehicle weight: 39,000 kg Unladen weight: 6,000 kg Payload: 33,000 kg Overall length: 11,000 mm Overall width: 2,550 mm Overall height: 3,670 mm Load volume: approx. 65 cbm MOT (TÜV) valid until: 06/2027, Inspection (SP) valid until: 12/2026 Roll tarp, platform Clean floor, end pieces, sides, reinforced rear walls Portal doors 1/2 and 1/2 at the rear, grain slide Remote control Cargo floor LED work lights + reversing lights 2 x 12-ton, 2-speed geared winch Shovel and broom holder, driver's side, front Storage box, plastic, driver's side, center Air suspension with lifting and lowering function 1 lift axle BPW drum brakes Tires: 385/65R22.5, 1.) approx. 40/80%, 2.) approx. 70/90%, 3.) approx. 80/80% ALCOA aluminum rims Dedpfx Ajzviumja Hskt Extendable ladder, passenger side, rear Access ladder behind the kingpin Half-shell mudguards Price: €25,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the local court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, omissions, and prior sale.