Used Bdm Ftb 100 for sale (23,650)

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1-220 AC. Servo controller, serial number as shown in the photo, used, professionally overhauled and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Rodpfx Aboi Ebhwo Eocd

Condition: ready for operation (used), Indramat KDA 3.2-100-3-A0S-W1 AC-Mainspindle Drive SN230902774878005, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this article. Please ask for price separately! Rcodpfx Ajtvctxsb Eod

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 AC servo controller, serial number as shown in the photo, used, professionally and completely refurbished and tested, with a 12-month warranty, 100% functional, scope of delivery as shown in the photos. Rodpfx Aoi Ebhhjb Ejcd

Condition: ready for operation (used), Indramat KDV 1.3-100-220/300-W1 power supply, serial number SN23226473930903, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photo. Rcjdpfx Abei Ebi Aj Eod

Condition: new, GMN TSE 100cg-6000 / 1.25 high-speed spindle, serial number: R358699, unused, 100% functional, scope of supply as shown in the photos. Rjdpfei D U U Tox Ab Ejcd

Condition: new, GMN TSE 100cg-6000 / 125 high-speed spindle, serial number: R358399, unused, in open original packaging, 100% functional, scope of delivery as shown in the photos. Redpoi Eaabefx Ab Eecd

Condition: good (used), Küppersbusch FES 100 Electric Pressure Boiling Pan Rcjdpfx Ajzniaasb Esd The Küppersbusch FES 100 (Model KCF 0408) is a professional electric pressure boiling pan with a usable capacity of 100 liters, designed primarily for use in commercial kitchens, the foodservice industry, and butcher shops for the efficient preparation of soups, stews, or for scalding meat. Key Technical Data & Features Capacity: Approx. 100 liters usable capacity (total capacity of the inner vessel is higher, around 110–151 liters). Heating System: Low-maintenance, closed PERMAPRESS system (steam heating jacket for even heat distribution without scorching). Controls: Electronic temperature control with setpoint and actual value display, plus quick-select settings for cooking time and temperature. Design: Round inner vessel made of robust stainless steel with a spring-assisted, balanced double-walled lid. Power Connection: 400 V (three-phase) with an output of approx. 18.6 kW. Draining: Integrated safety drain tap for easy draining of liquids. Dimensions: 800 mm width × 850 mm depth × 900 mm height Weight: Approx. 117 kg You can find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: used, mileage: 101,692 km, power: 228 kW (309.99 HP), first registration: 12/2007, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, Year of construction: 2007, Equipment: ABS, air conditioning, crane, = Additional options and accessories = - Tipping hydraulics = Remarks = Crane Rotator: ✓ Clamshell bucket: ✓ = More information = Front axle: Steering Rear axle: Double wheels Rodpozmam Usfx Ab Eocd Crane: TLC 105.2, behind the cab

Condition: used, mileage: 10 km, power: 75 kW (101.97 HP), first registration: 11/2025, fuel type: diesel, overall weight: 2,040 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Your direct contact: Andreas Kawa, Head of Sales, Commercial Vehicles – Phone: | E-mail: Rcodjznrhmopfx Ab Eed Special equipment: Worksite package Loading area floor and side walls made of plastic (PP) Comfort Connect package with Extenso cab Additional equipment: Airbag, passenger side, airbag, passenger side can be deactivated, airbag, driver side, anti-slip regulation (ASR), automatic lighting escort function (Coming Home, Leaving Home), exterior mirrors, electrically adjustable and heated, exterior mirrors, black, on-board computer, parking assistance system at the rear with parking sensors on the sides, driver assistance system: emergency call and assistance system (CITROEN Connect), rear tailgate doors without glazing, body/superstructure: van, head airbag system, loading area partition without windows, model revision, engine 1.5 L – 75 kW Blue-HDI FAP, wheelbase 2785 mm, tire repair kit, safety package, low emissions according to Euro 6e emission standard, sliding door on the right without window, SCR system (AdBlue technology), side airbags in the front, side protection strips, black, front left seat, adjustable tilt, seat cover/upholstery: fabric Curitiba, smartphone station, special paint finish Ice White / Kaolin White, stop-start system, automatic door unlocking (in the event of an accident), lashing eyes in the loading area, auxiliary heater Errors, changes, and sales pending. The information regarding the equipment provided in this advertisement does not constitute a guaranteed characteristic in the legal sense and serves solely for general information purposes. Binding equipment features are exclusively subject to the purchase contract. Example photos!

Condition: new, mileage: 10 km, power: 75 kW (101.97 HP), fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, Your direct contact: Andreas Kawa, Head of Sales, Commercial Vehicles – Phone: | E-mail: Special equipment: Preparation for trailer coupling Load compartment package: 4 lashing eyes, load compartment lighting Worksite package Load compartment floor and side walls made of wood Comfort Connect package with Multiflex cabin Additional equipment: Airbag, passenger side, airbag, passenger side can be deactivated, airbag, driver side, automatic accompanying lighting function (Coming Home, Leaving Home), exterior mirrors, electrically adjustable and heated, exterior mirrors with black covers, on-board computer, brake assist, parking assistance system, rear, rear tailgate doors without glazing, body/superstructure: panel van, head airbag system, steering column (steering wheel) adjustable, model upgrade, engine 1.5 L – 75 kW diesel FAP, payload 650 kg, parking brake, electric, Peugeot Connect-Box / SOS button (emergency call for vehicle localization), wheelbase 2785 mm, tire pressure monitoring system, safety package, low emissions according to emission standard Euro 6e, shift point indicator, Eco-LED headlights, sliding door, right, SCR system (AdBlue technology), side airbags, front, side protection strips, black, seat cover/upholstery: fabric Curitiba, smartphone station, special paint finish Snow White / Kaolin White, start/stop system, automatic door unlocking (in the event of an accident) Rsdpfxjznri Ro Ab Eocd Errors, changes, and interim sales: the information regarding the equipment provided in this advertisement does not constitute a guaranteed characteristic in the legal sense and serves solely for general information. Binding equipment features are exclusively subject to the purchase contract.

Condition: new, mileage: 10 km, power: 100 kW (135.96 HP), fuel type: electric, color: white, gearing type: automatic, number of seats: 3, Equipment: ABS, central locking, electronic stability program (ESP), navigation system, Your direct contact: Andreas Kawa, Head of Sales Commercial Vehicles – Phone: | Email: Enhanced LED cargo area lighting (5W + 10W) Protective wooden cargo floor (9mm, non-slip) CONNECT PACK LED headlights, LED daytime running lights Glazed and insulated partition PACKAGE "E-WORKSITE" Double co-driver seat incl. Moduwork COMFORT PACK Rcodpfx Aeznrl Ssb Ejd Additional equipment: Airbag driver/passenger side, audio controls on the steering wheel, RCC DAB audio system (radio/CD player MP3-capable), double co-driver seat, on-board computer, rear parking assist, electric motor 100 kW (cont. 57 kW), driver assistance system: emergency call and assistance system (CITROEN Connect), rear wing doors without glazing, HV battery 75 kWh (lithium-ion), body/superstructure: van, charging cable with Type 2 connector (Mode 3), charging device on-board charger 11 kW, steering column (steering wheel) mechanically adjustable in height/length, headlight range adjustment, model upgrade, parking brake electric, wheelbase 3275 mm, safety package (DZVOE), sliding door right without window, front left seat adjustable in height, seat cover/upholstery: fabric Curitiba, special paint Ice White / Kaolin White, socket (12V connection) 3-fold, socket (12V connection) in the cargo area, rain sensor Errors, changes, and sales prior to publication – the information on equipment in this advertisement does not constitute a guaranteed characteristic in the legal sense and serves solely for general information. Binding equipment features are exclusively subject to the purchase contract.

Condition: new, mileage: 10 km, power: 75 kW (101.97 HP), fuel type: diesel, overall weight: 2,350 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 5, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Your direct contact: Andreas Kawa, Head of Sales, Commercial Vehicles – Phone: | Email: Special equipment: Loading area floor and side walls made of wood Rcjdpfx Aoznridsb Eed Winter package Spare wheel with rim Rear wing doors with glazing, opening 180° 10-inch infotainment system IVI HIGH Additional equipment: Airbag, passenger side, airbag, passenger side, deactivatable, airbag, driver side, automatic escort lighting function (Coming Home, Leaving Home), exterior mirrors with black protective caps, on-board computer, brake assistant, parking assistance system, rear, increased payload, rear wing doors without glazing, Isofix mounts for child seat, body/superstructure: van, comfort seat, front left, head airbag system, steering column (steering wheel) adjustable, model update, engine 1.5 L - 75 kW diesel FAP, multi-function seat, front right, parking brake, electric, Peugeot Connect-Box / SOS button (emergency call for vehicle localization), wheelbase 2975 mm, tire pressure monitoring system, rear seat bench, foldable 1/3-2/3, safety package, low emissions according to emission standard Euro 6e, gear shift indicator, Eco-LED headlights, sliding doors on both sides, with opening window, SCR system (AdBlue technology), side airbags, front, side protection strips, black, seat cover/upholstery: fabric Curitiba, special paint finish, snow white / kaolin white, start/stop system, door unlocking automatically (in case of an accident) Errors, changes, and interim sales – the information on equipment provided in this advertisement does not constitute a guaranteed characteristic in the legal sense and serves solely for general information. Binding equipment features are exclusively subject to the purchase contract. , seat heating, front

Condition: used, maximum load weight: 7,130 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 02/2013, loading space length: 6,100 mm, loading space width: 2,480 mm, loading space height: 2,800 mm, Equipment: ABS, * Fliegl 2-axle tandem trailer with tarpaulin and bows * Type TPS 100 * BPW axles * Air suspension * Leveling system * Edscha cover * Height-adjustable/extendable drawbar * Galvanized frame * ABS * EBS Rjdpfjzp Tqlex Ab Escd

Condition: ready for operation (used), Year of construction: 1998, operating hours: 78,026 h, pressing force: 102 t, overall weight: 6,750 kg, number of axes: 6, This 8-axis AMADA HFBO 100-30 press brake was manufactured in 1998. It features a maximum press force of 1000 kN and a bending length of 3100 mm, providing robust capabilities for various applications. The machine has undergone software upgrades and cylinder replacements in 2024. If you are looking to get high-quality bending capabilities, consider the AMADA HFBO 100-30 press brake we have for sale. Contact us for further details. Rcedezl Dvqspfx Ab Ejd • Distance between frames: 2700 mm • Maximum stroke: 200 mm • Number of axes: 8 (Y1, Y2, X1, X2, R1, R2, Z1, Z2) • Voltage: 400/415 V • Frequency: 50 Hz • Nominal current: 199 A • Number of phases: 3 • Installed power: 9 kW • Noise level:

Condition: used, Year of construction: 2008, Pressure total: 100 ton Daylight: 1.400 mm Rsdpfoznn Upox Ab Ejcd Table surface area : 1.300 x 1.000 mm Slide area: 1.300 x 1.000 mm Ejector Force: 35 kN max. capacity of swivelling ram plate: 40 kN Die Weight on table max.: 80 kN max. capacity of tilting table: 50 kN Oil volume: 200 l Required power: 10 kW Dimensions L x W x H: 3.95 x 2.3 x 4.5 m Distance between the columns F - B: 1.050 mm Weight of machine approx.: 10 ton

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 240 h, load capacity: 200 kg, empty load weight: 2,700 kg, construction height: 1,990 mm, fuel type: electric, total length: 2,820 mm, drive type: Elektro, arm reach: 3,000 mm, construction width: 990 mm, working height: 9,900 mm, Vertical lift platform Technical condition: good Front tyres type: solid rubber (bandages) Front tyres size: 16-5-11 1-4 Front tyres condition: 80 - 100% Rear tyres type: solid rubber (bandages) Rear tyres size: 16-5-11 1-4 Rear tyres condition: 80 - 100% Battery voltage: 24V Rsdpoylqp Esfx Ab Ejcd Battery capacity: 250Ah Battery year of manufacture: 2015 Battery condition: 60 - 80%

Condition: excellent (used), CTS Type: TSS-70/350-A Water-cooled cooling unit For sale is a high-quality temperature shock testing chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. The unit is used for carrying out temperature shock tests and is typically used in industry, research, and quality assurance. Application areas: Material testing Aging tests Electronics and component testing Temperature shock and cyclic temperature tests Technical data: Type: TSS-70/350-A Temperature range: Hot chamber: +50°C to +200°C Cold chamber: -70°C to +100°C Electrical data: Connection: 400 V, 3/N, 50 Hz Rated power: approx. 20.4 kW Rated current: approx. 36.5 A Refrigeration system: Refrigerant: R404A / R23 Pre-cooling stage: approx. 6.0 kg Cooling stage: approx. 3.0 kg Water-cooled Equipment / Features: CTS control panel with touch display Microprocessor-controlled control and monitoring system Program operation Digital setpoint and actual value display 2-zone system (hot and cold chamber) Automatic moving platform for shock tests Technical design: Hot and cold chambers are separate Moving platform system for rapid temperature changes Test chamber made of stainless steel Insert shelf / grating Viewing window in the door Water cooling connections available Control cabinet integrated Dimensions: Rcedpfsy Hkgbex Ab Eed External dimensions (H x W x D): approx. 2450 x 2160 x 2200 mm Internal dimensions (H x W x D): approx. 610 x 850 x 680 mm Weight: approx. 2500 kg Additional data: Protection class: IP 54 Operating overpressure: approx. 25 bar Test pressure: approx. 27.5 bar For your security as a buyer, the following information is provided! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: see pictures (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male Rcjdpfxsy Hkd Hs Ab Eod - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A Rjdpfx Ajzizmuob Ejcd - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm Rcsdpfozizmnsx Ab Eed External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: Redpfozizmbsx Ab Ejcd - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: used, Espec Type: TSD-100 100 liters usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range hot chamber: +60°C to +200°C Temperature range cold chamber: -70°C to 0°C Test chamber interior dimensions: 710 x 345 x 410 mm (W x H x D) Rcodpfx Aezizl Rsb Ejd External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design (on castors) 2 stainless steel specimen baskets Cable entry port ⌀ 100 mm Refrigerants: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us prior to sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon passing inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) For further questions, please feel free to contact us by phone.

Condition: used, mytron Type: T2240 Water-cooled temperature chamber Technical Data: External dimensions: Width 1435 mm, Height 1955 mm, Depth 2590 mm Test chamber dimensions: Width 1050 mm, Height 1400 mm, Depth 1600 mm Test chamber volume: approx. 2240 l Cable entry ports: 2 x 100 mm right 2 x 100 mm left Temperature range: –40 °C to +100 °C at 23 °C ambient temperature Temporal temperature constancy: +/- 0.5 °K Spatial temperature constancy: +/- 1.0 °K Cooling: water cooling Inlet and outlet: 1" internal thread Cooling water shut-off via solenoid valve when unit is OFF Fault indicator for refrigeration unit errors Cooling water consumption: inlet temperature approx. 15 °C, approx. 15 l/min, outlet temperature approx. 22 °C (with continuous cooling approx. 27 °C) Power connection: 3NPE AC 50 Hz 400 V, 32 A CEE plug Power consumption: approx. 6.5 kVA Fusing: 3 x 20.0 AT, 3 x 10.0 AT Rjdpfx Aszizg Ujb Ejcd Lighting: 25 watts each, left and right sides of test chamber Exhaust connection: DN 100 mm plug-in system Safety device: electronic over-temperature protection, fixed setting Smoke detection with alarm sound Viewing window: five-layer glass, 130 x 360 mm Refrigerant: R 404 A, approx. 10 kg Weight: approx. 850 kg Condition: used Scope of delivery: (see picture) (Specifications subject to change and error!) If you have further questions, we would be glad to answer them by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Rjdpfxjzizgho Ab Escd Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS Model: TW -60/9 Water-cooled temperature test chamber CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk-in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical Specifications: Cooling unit: - Water-cooled, low noise, semi-hermetic - Stepless capacity control via electronic monitoring and control system - Environmentally friendly refrigerants R23 / R404A Control: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numeric input of set values - Fault messages in plain text - RS 232 interface - Free switching channels for external test item control Technical Performance Data: Temperature tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ± 0.1 to 0.5 K (over time) Rjdozizdyepfx Ab Eocd Temperature change rate, average with test specimens and under radiant heat, measured at air intake: - Heating: 1.6 K/min from -40°C to +85°C - Cooling: 1.6 K/min from +85°C to -40°C - Test item: 420 kg solar cell modules, 100% load - Radiant heat: 3000 W permanent Technical data based on ambient temperature +25 ​​°C, nominal voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: - Test chamber volume: 9 m³ - External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm - Test chamber internal dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: - Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz - Rated power: 48.9 kW; Rated current: 74.9 A - Protection class: IP 54 - Cooling water connections: feed/return R1 ¼”, internal thread - Condensate drain unpressurized R1” internal thread - Weight: approx. 5609 kg Condition: used Delivery contents: (See image) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.