Used Battenfeld Hm 300/2250 for sale (14,806)

Condition: good (used), Year of construction: 2002, overall weight: 110 kg, type of input current: three-phase, input voltage: 400 V, fuel: domestic gas H, input frequency: 50 Hz, Equipment: type plate available, For sale in excellent condition HOVAL HG-E 300-1650kw industrial gas burner with control, DUNGS assembly manufacturer HOVAL HG-E 140 year of manufacture: 2002 heating output min.-max. 300–1650 kw gas type: natural gas Gas flow min.–max. [Stm3/h] 32–174 Dsdpfx Asvmhq Eofmokp Gas pressure 90-220 Mbar DUNGS MB-DLE 420 B01 S22 Gas multiblock gas regulator Tightness checker Dungs VPS-504 S02 Dungs LGW 50A pressure switch Electrical connection 400v 3-phase 50Hz Total energy consumption 2.7kw Fan motor: 2.2kw Protection IP40 Flame tube diameter: 230mm flame tube length: 260mm Gas connection: Rp 2 - DN65 - DN80 Two-stage / two-stage sliding / modulated regulation machine length: 1100mm width: 700mm height: 500mm Dc200Rj weight 110 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 137949-100, clamping force: 2,100 kN, screw diameter: 65 mm, displacement volume: 913 cm³, injection pressure: 1,600 bar, overall weight: 10,500 kg, controller model: UNILOG B8, The machine was serviced and upgraded to the latest standards by the manufacturer in 2021! It has not been used since and is therefore in very good condition! The machine is offered complete with 2 Kistler modules for cavity pressure control! TECHNICAL DETAILS Plastic type: Thermoset Clamping force: 2,100 kN Screw diameter: 65 mm Screw stroke: 275 mm Screw L/D ratio: 22 Max. screw speed: 278 rpm Screw torque: 1,920 Nm Tie bar spacing (HxV): 670 x 620 mm Mold installation height: 350 mm Platen daylight: 1,100 mm Opening stroke: 750 mm Ejector stroke: 200 mm Ejector force: 65 kN Theoretical shot volume: 913 cm³ Specific injection pressure: 1,600 bar Max. plasticising rate: 62 g/s Nozzle stroke / nozzle force: 400 mm / 100 kN Free-shot injection rate: 419 cm³/s Barrel heater power: 27 kW Number of heating zones incl. nozzle: 5 MACHINE DETAILS Control system: UNILOG B8 Hydraulics Hydraulic oil tank capacity: 600 liters Oil temperature min/max (HLP 32): 30 °C / 40 °C Oil temperature min/max (HLP 46): 40 °C / 50 °C Oil cooling activation temperature (HLP 32): 35 °C Oil cooling activation temperature (HLP 46): 45 °C Electrical Drive power hydraulic pump: 37 kW Max. screw barrel temperature: 350 °C Dedeyi Ailopfx Afmskp Cooling water system Cooling water consumption: approx. 0.5 - 1.5 m³/h Max. cooling water supply temperature: 35 °C Cooling water return: max. 10 bar Ambient temperature: °C Noise level: 65 dB(A) Weight: 10,500 kg Operating hours: 1,437 h EQUIPMENT Kistler module for cavity pressure control, range 1: 20,000 pC Kistler module for cavity pressure control, range 2: 10,000 pC

Condition: excellent (used), Year of construction: 2011, BATTENFELD 35/75 PLUS INJECTION MOLDING MACHINE Technical specifications: Year of manufacture: 2011 Operating hours: 89,192 h Clamping force: 350 kN Injection volume: 25.4 cm³ Injection shot weight: approx. 23–27 g PS Screw diameter: 18 mm Maximum mold opening stroke: 200 mm Column spacing: 270 x 260 mm Platen dimensions: 470 x 280 mm Minimum mold height: 150 mm Centering hole diameter: 110 mm Maximum injection pressure: 2034 bar Hydraulic oil volume: 125 dm³ Total power: 28 kW Machine weight: 1050 kg Machine type: hydraulic Control system: BATTENFELD UNILOG B2 The machine is in very good technical and visual condition. A larger number of machines in the same configuration are available – a total of 12 units manufactured in 2010–2011. Dodpfx Afjy Uk Axjmskp

Condition: used, mileage: 488,000 km, power: 324 kW (440.52 HP), first registration: 03/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: yellow, gearing type: automatic, loading space length: 5,600 mm, loading space width: 2,480 mm, loading space height: 600 mm, Year of construction: 2010, Equipment: ABS, air conditioning, crane, MAN TGS 28.440 / 6x2 Platform 5,60 m + CRANE + REMOTE CONTROL Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2010 ? MILAGE: 488 000 km EQUIPMENT: ? ABS ? POWER STEERING ? EL WINDOWS ? EL MIRRORS ? TACHOGRAPH ? AUTOMATIC AIRCONDITION PLATFORM: 560 x 248 x 60 cm (L x W x H) CAPACITY: 10 000 kg TOTAL WEIGHT: 26 000 kg WHEELBASE: 485/135 cm TIRE SIZE: FRONT: 385/65R22,5 BACK: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: HMF 3000 K5 + REMOTE CONTROL Djdpfxsn Hu Hbs Afmjkp TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: like new (used), 300 linear meters of Nedcon pallet racking New item, see pictures! A top-quality racking system from the renowned manufacturer NEDCON – a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height: 6.5 m Depth: 110 cm, blue Beam length: 2.7 m, orange Beam load capacity/bay: 3050 kg Negotiable price: €50,280.00 net, ex warehouse The offer includes: + 108 units of pre-assembled frames, depth 110 cm, height 6.5 m + 642 units of beams, length 2.7 m, 3050 kg load capacity/bay + 1284 units of safety locks + 216 units of concrete anchors Load capacity signs, documentation, etc. are included. Further accessories can be found in the accessories catalog. Frame color: blue RAL 5019, infill panels: galvanized. Heights from 2 m to 7 m are in stock. Bay load: 12 tons; higher bay loads available upon request. Beam color: orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. The item is in stock. Transport and assembly are available upon request. Other configurations are available upon request. Over 2000 meters available. Inspection is possible at any time by appointment. Further information is available upon request. We constantly have over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, information, and prices, as well as prior sale! See our general terms and conditions; all prices excl. VAT, ex warehouse.) Purchase/Sale: We are constantly looking for and offering numerous items from various areas: - Thorough business premises clean-ups - Business liquidations - Quick, flexible, and efficient! - We also clear out and/or dispose of goods for insolvency administrators. Please send us a few keywords, and we will get back to you promptly. Dkodpfjfi U Afex Afmep To visit our website, please click on our logo!

Year of construction: 1990, condition: good (used), This haul-off machine, manufactured by Battenfeld Extrusionstechnik GmbH, is in the machine storage of Plastima Used Machinery. The machine, a model Haul-Off R630/6V, dates from the year 1990. Brand: Battenfeld Extrusionstechnik GmbH Model: Haul-Off R630/6V Year of manufacture: 1990 Voltage: 380 V Power: 4,5 kW Pipe diameter max: 110 mm to 630 mm Dsdpfx Ajrrv Uwefmskp

Condition: good (used), Year of construction: 1997, This Battenfeld cooling tank is in machine storage at Plastima Used Machinery. The vacuum tank is from 1994 and is in great condition. Dsdpfjxu E T Asx Afmskp Brand: Battenfeld Extrusionstechnik GmbH Model: V125VA Year of construction: 1997 Tube outer diameter max: 125 mm Cooling length: 6000 mm

Condition: used, mileage: 852,923 km, power: 324 kW (440.52 HP), first registration: 05/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 26.440 6x4 | Crane with new UVV inspection | Well maintained & ready for operation | Few crane hours This MAN TGS 26.440 is in excellent technical and visual condition. The crane comes with a new UVV safety inspection, the rear axle tires are new, and the vehicle has been fully serviced. Clean appearance, runs flawlessly – immediately ready for use. Highlights: * HMF 3000-K5 loading crane * New TÜV inspection * 440 HP, 6x4 drive * Crane unit with current UVV inspection * New rear axle tires * Technically overhauled * Very well-maintained interior and exterior * Long-distance driver’s cab with 2 sleeper bunks * Air-suspended driver’s seat * Multifunction steering wheel Dsdexxfl Tepfx Afmjkp * Air-suspended driver’s seat * Auxiliary heating/air conditioning * Extendable refrigerator compartment * Radio * Navigation system * Stationary air conditioning * Electrically operated mirrors and windows * Air horns * HMF 3000-K5 loading crane * Radio remote control For further information, please feel free to contact us.

Condition: used, mileage: 852,923 km, power: 324 kW (440.52 HP), first registration: 05/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 26.440 6x4 | Crane with new safety inspection (UVV) | Top condition & ready for immediate use | Low crane hours This MAN TGS 26.440 is in excellent technical and visual condition. The crane has a new UVV inspection, the rear axle tires are new, and the vehicle has been fully serviced. Clean appearance, runs flawlessly – ready for immediate use. Highlights: - HMF 3000-K5 loading crane - New TÜV inspection - 440 HP, 6x4 drive - Crane system with current UVV inspection - New rear axle tires - Technically overhauled - Very well-maintained interior and exterior - Long-haul driver’s cab with 2 bunks - Air-suspended driver’s seat - Multifunction steering wheel - Air-suspended driver’s seat - Auxiliary heating/air conditioning - Extendable refrigerator compartment - Radio - Navigation system - Stationary air conditioning unit - Electrically operated mirrors and windows - Air horns - HMF 3000-K5 loading crane - Radio remote control Djdpfxsxul Ero Afmekp For further information, please feel free to contact us.

Condition: new, Year of construction: 2026, pressure 200 t stroke 400 mm table surface area Arbeitsbreite 1300 mm pressure 243 bar oil volume 64 dm³ ajustment speed 5,73 mm/sec work speed 1,84 mm/sec return speed 7,08 mm/sec total power requirement 3,0 kW weight of the machine ca. 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 Dedpfet I D Thsx Afmekp speeds, a joystick and a hand pump for precision pressing fitted.

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK Dsdpfx Afeprfbuemskp table: 380 x 380 mm turning speeds 75 - 3200 U/min thread M16 ST60 column diameter 98 mm engine output 1,1 kW dimensions 800 x 500 x 2000 mm weight 210 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, bore capacity in steel (diameter) 32 mm throat 300 mm bore stroke 160 mm morse taper 4 MK table: 460 x 460 mm turning speeds 75 - 3200 U/min engine output 1,5 kW column diameter 125 mm thread M16 ST60 feed 0,10/0,18/0,26 mm/U dimensions 800 x 500 x 2200 mm weight 350 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting. Dodekahu Ropfx Afmjkp

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3000 U/min engine output 1,1 kW column diameter 98 mm thread M16 ST60 dimensions 700 x 450 x 1500 mm weight 200 kg - Height adjustable and angle adjustable table - Movable work table - Prepared for cooling system - Powerful engine Dodskahu Uopfx Afmekp - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: new, sheet width 2035 mm plate thickness 4,5 mm ST thickness at "Niro-steel" 3,0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable 70 - 600 mm total power requirement 5,5 kW weight of the machine ca. 4145 kg dimensions of the machine ca. 3300 x 1550 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy Dodpfxjxaaahs Afmekp with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 343.0 mm/sek grinding width 530 Plantisch mm table height 475 - 1240 mm total power requirement 3.0 kW weight of the machine ca. 100 kg range L-W-H 500 x 1010 x 1000 mm Description: Dkodpfx Afoxaaq Temep The belt sander models TAS 75 and 150 are powerful Quality machines, built according to the strictest environmental and Safety regulations. The belt sanders are standard with motor brake, adjustable working height, eye protection, Angle stop and motor protection switch with zero voltage release built. The low-noise machine with CE mark is suitable ideal for grinding all metals. Furnishing: - engine brake - adjustable working height - Plexiglass privacy screen - Angle stop - Motor protection switch with zero voltage release - self-adjusting belt tension - Powerful engine 3.6 kW - suction nozzle including: integrated suction

Condition: new, sheet width 2540 mm plate thickness 4,5 mm ST Dkodpfx Aoxaaz Sjfmsp thickness at "Niro-steel" 3,0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable 70 - 600 mm total power requirement 5,5 kW weight of the machine ca. 6275 kg dimensions of the machine ca. 3900 x 1700 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: EAN0729389556525, total length: 137,000 mm, shelf height: 5,000 mm, number of shelf rows: 10, clear span: 3,300 mm, frame height: 5,000 mm, frame width: 1,100 mm, load per truss pair (max.): 3,250 kg, shelf length: 137,000 mm, support length: 3,300 mm, 2 single-row pallet racks + 4 double-row pallet racks, each 13.7 m long, 5 m high, 1.1 m deep. Each with 4 bays, 3.3 m wide, and 3 beam levels per bay. Shelf load capacity: 3,250 kg per level. Scope of delivery: - 50 frames (RM5011 - RAL5019), including base plates, shims, and fastening materials - 40 spacers/connectors for double rows (ZAbh20) - 200 floor anchors (ZZBA1210) - 240 individual beams (T33135 - RAL2008) - 10 impact guards/collision protectors (ZRS40901) - 10 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Shipping / Delivery: Dkedpfx Afeyzl T Eomjp - Maximum 20 working days after receipt of payment - Delivered free to construction/installation site - Unloading from truck to be carried out by the buyer using their own forklift - Deliveries are made throughout the entire territory of the Federal Republic of Germany (except islands); deliveries to EU countries are subject to individual agreement.

Condition: excellent (used), Year of construction: 1999, control type: NC control, controller manufacturer: UNIOP, working width: 2,520 mm, HM bending machine Model KSM 5 / 2500 Year : 1999 Dksdpfxoyx Epbs Afmop Capacity : 2520 x 5 mm. INIOP NC control (Swiss made) Manual back gauge

Condition: excellent (used), HM window machine 3 x right 4x left top grinding top bottom Dkodpst Hk Atefx Afmop

Condition: excellent (used), Year of construction: 2018, operating hours: 13,500 h, functionality: fully functional, machine/vehicle number: 138855-100, Sales only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== Dodsy Dgl Ujpfx Afmskp For technical data, please refer to the handout provided. Any warranty or guarantee is excluded. We do not assume liability for the accuracy of the technical data or year of manufacture, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements specified in accident prevention regulations. No sales to private individuals.

Condition: used, Power 5,5 KW Receiver 50 L weight of the machine ca. 0,450 t dimensions of the machine ca. . m feed pressure 330 bar liter capacity . l Medium: Nitrogen N2 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Dkjdpoyqvz Dsfx Afmop Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 138337-100, clamping force: 9,000 kN, screw diameter: 105 mm, injection pressure: 1,931 bar, ejector stroke: 300 mm, opening stroke: 2,100 mm, TECHNICAL DETAILS Screw diameter: 105 mm Screw stroke: 525 mm Screw L/D ratio: 22 Theoretical shot volume: 4,545 cm³ Injection pressure: 1,931 bar Maximum screw speed: 167 rpm Maximum plasticizing rate: 151 g/s Screw torque: 8,000 Nm Nozzle travel / nozzle thrust force: 950 mm / 129 kN Injection volume flow rate: 725 cm³/s Injection volume flow rate with double pump (option): 906 cm³/s Air injection volume flow rate with tank (option): 1,812 cm³/s Cylinder heating capacity: 53.9 kW Number of heating zones: 7 Clamping force: 9,000 kN Maximum opening stroke: 2,100 mm Min./Max. tool height: 500 – 1,000 mm Platen size: 1,720 x 1,550 mm Tie bar spacing: 1,200 x 1,000 mm Ejector stroke: 300 mm Ejector force: 165 kN Djdpfx Asy T Hprsfmskp Tool opening force: 300 kN MACHINE DETAILS Pump output: 90 kW Heating capacity: 53.9 kW Oil tank volume: 1,100 l Dimensions & Weight Machine dimensions (L x W x H): 10,100 x 3,400 x 2,700 mm Weight: 35,200 kg

Condition: excellent (used), Year of construction: 2014, You are bidding on: a branded machine - folding press - from a highly reputable and well-known manufacturer - HM. Device features: - HM folding press - Rail bends cleanly – test possible on site - Angle display - Bending length: 1270 mm - Sheet thickness: up to 3 mm (steel sheet, aluminum, zinc, etc.) - 4-segment rail, see pictures (extension rail also segmented) - Foot-operated closer - Partially electric: bends electrically, opening and closing mechanically by foot - Additional: previous owner installed a light with bracket and rear sheet tray (both removable) - Professionally welded, mobile machine frame - Original price over €13,000 Shear HT 100 and other models available optionally. Important! Optionally, you can find and purchase a wide range of machines and machine accessories, such as various rails, depth stops – everything related to sheet metal and steelworking, including folding presses, guillotine shears, drills, slip rollers, slitting and profiling machines, accessory parts (beading units, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers in our shop. I am always available to answer any questions. You will receive an invoice with stated VAT. Free loading possible – weight approx. 600 kg. Inspection and test runs are possible and encouraged by prior telephone arrangement. Dksdpfxox Hixpj Afmep Payment in cash upon collection. Take advantage of our experience and expertise – we are happy to advise you. Collection by the buyer (or by a transport company commissioned by the buyer) should take place within 10 days following the end of the auction. Location: 97261 Article number: Folding Press HM 251202.

Condition: used, mileage: 852,923 km, power: 324 kW (440.52 HP), first registration: 05/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, MAN TGS 26.440 6x4 | Crane with new UVV inspection | Well-maintained & ready for operation | Low crane hours This MAN TGS 26.440 is in excellent technical and optical condition. The crane has a new UVV safety inspection, the rear axle tires are new, and the vehicle has undergone a full technical check. Clean appearance, runs flawlessly – immediately ready for use. Highlights: * HMF 3000-K5 loading crane * New general inspection (TÜV) Dedpfsxtryysx Afmokp * 440 HP, 6x4 drive * Crane system with current UVV safety certification * New rear axle tires * Technically overhauled * Very clean interior and exterior * Long-distance cab with 2 bunks * Air-suspended driver’s seat * Multifunction steering wheel * Auxiliary heater / air conditioning * Extendable refrigerator compartment * Radio * Navigation system * Stationary air conditioning system * Electric mirrors and windows * Air horns * HMF 3000-K5 loading crane * Radio remote control For further information, please feel free to contact us.

Condition: refurbished (used), Year of construction: 2009, ø 450-1200 mm PE/PP Central clamping Dodjw H Iyfjpfx Afmjkp