Used Apc Ups System for sale (49,823)

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, The Lamina Gluer is a manual fed in-line folding, gluing and taping machine. In very good technical condition, after total renovation. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Machine in is at our premises, testing on-site is possible. Iodpfx Adjyzfkks Njba Max Sheet Size: Width: 2200 mm (87") Min Sheet Width: 70 mm (3") Electrics: 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 50 L/min

Year of construction: 2010, condition: used, controller model: POWERTOUCH, power: 30 kW (40.79 HP), workpiece length (max.): 18,800 mm, workpiece width (max.): 15,000 mm, feed rate X-axis: 80 m/min, TECHNICAL DETAILS Workpiece length: 18,800 mm Workpiece width: 15,000 mm Min. plate length: 2,000 mm Max. plate length: 4,300 mm Min. plate width: 800 mm Max. plate width: 2,200 mm Max. feed rate: 80 m/min MACHINE DETAILS Control system: POWERTOUCH Total connected power: 30 kW EQUIPMENT CE marking Iodszmtmnopfx Ad Njba The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 5107

Condition: new, Year of construction: 2024, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! The system was purchased in 2024 and has not yet been put into operation due to an order backlog! The new price of the system was €672,000 plus VAT! According to the documentation, the system’s production started in 2023. The final assembly took place in 2026. The video is an example video. It does not show the actual system that is for sale! The system has the following configuration: TECHNICAL DETAILS Storage type: Single-deep storage, double-deep Total capacity: approx. 4,540 containers Permissible container weight: 30 kg per container Block on the picking side Rows: 46 Levels: 25 Storage locations for 120 mm boxes: 1,974 Storage locations for 170 mm boxes: 276 Block on the back of the storage Rows: 46 Levels: 25 Iedpfx Aeznc R Sjd Nsba Storage locations for 120 mm boxes: 2,020 Storage locations for 170 mm boxes: 276 Rack and pinion stacker crane Type: AP 31 including double-deep feed table Direction of movement: Horizontal Acceleration: max. 3.5 m/s² Speed: max. 3.5 m/s Box feed Pneumatic lowering for containers: 1 piece Roller conveyor technology: approx. 4.5 m Pneumatic stopper, side: 1 piece Drive: 1 piece Electric drive with inverter: 1 piece Pneumatic drive: 2 pieces Emergency stop button: 1 piece Box storage Pneumatic lowering for containers: 1 piece Roller conveyor technology: approx. 4.5 m RollerDrive element: 1 piece Pneumatic stopper, side: 1 piece Drive: 1 piece Control of the RollerDrive element: 1 piece Electric drive with inverter: 1 piece Pneumatic drive: 2 pieces Express retrieval Gravity roller track: 1.3 m Substructure for storage stiffening: 2 pieces Special feed RollerDrive element: 1 piece Substructure for storage stiffening: 2 pieces Control of the RollerDrive element: 1 piece Pick by Light workstation RollerDrive element: 1 piece Projector: 1 piece Superstructure for storage stiffening: 1 piece Control of the RollerDrive element: 1 piece Projector control: 1 piece Further technical details can be found in the attached offer.

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Ijdpeyk Ip Tsfx Ad Noba Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Year of construction: 2026, condition: new, functionality: fully functional, Genox 1,000kg/hr Rigid Plastic Washing Line designed for rigid plastics with a wall thickness ranging from 1~25 mm such as HDPE/PP bottles, containers etc. Ibsdpfx Aszudlded Noa The system includes pre-shredder, friction washers, float sink separation tank, granulator and drying system for producing clean dry plastic granules along with a central, intelligent HMI control system. This is a standard system we offer but can be tailored to suit specific customer requirements. Individual items from our systems are available for separate purchase and integration into existing customer systems. Please contact us to discuss your project or to set up a site visit.

Condition: good (used), Year of construction: 2008, functionality: fully functional, A weighing system previously used for packing hard-boiled sweets, but suitable for all manner of snack foods, confectionery, nuts, seeds, etc. Features the following equipment: 1 x AST-2-1 stainless-steel hopper and vibratory feeding pan with manual gate. Hopper internal dimensions - 795mm long x 795mm wide. Overall dimensions - 1100mm long x 880mm wide x 1150mm high. Ibodpjzaw Nuofx Ad Nja 1 x AST-3-5 stainless-steel bucket elevator. Each bucket dimensions - 380mm long x 115mm wide x 60mm high. Overall dimensions - 2650mm long x 680mm wide x 3400mm high. 1 x A10 -10-head multi-head weigher with touch-screen control panel and 1.6L smooth weighing pans. Programmable for up to different 50 programs. 1 x Stainless-steel gantry with height-adjustable feet and wheels. Overall dimensions - 1220mm wide x 1320mm deep x 1680mm high. Overall footprint of system (in current setup) - 3.7m long x 2m wide x 3.4m high.

Year of construction: 2013, condition: excellent (used), functionality: fully functional, REF: MM6423 Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Date of manufacture - 2013. Belt width - 245mm wide. 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Manufacturer - Yamato Scale Co., Ltd. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Manufacturer - Gainsborough Engineering Ltd. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Some spare parts are also included. Ibsdey Um T Hjpfx Ad Nsa Videos available on request.

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Iedpfx Aey Hlvwsd Noba Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Isdpjy Hlkbofx Ad Noba Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Condition: good (used), Complete weighing and vertical form, fill and seal twin bagging system, previously used to pack chocolate drops. This system comprises of the following equipment: 1 x Joy Conveyors product hopper. Manufacturer – Joy Conveyors Ltd. Overall dimensions – 550mm long x 610mm wide x 680mm deep. 1 x Joy Conveyors bucket elevator. Manufacturer – Joy Conveyors Ltd. 1 x Stainless-steel gantry and steps. Gantry overall dimensions – 3m long x 3m wide. 1 x High Dream AC-6B14 14-head multihead weigher with dimple pans and 10.4’’ touch-screen control panel. Manufacturer – High Dream Intelligent Machinery Co., Ltd. Weighing range – 25g – 500g. Accuracy - ±0.5g. Speed – up to 140 bags/minute (product dependent). 1 x Keymac servo-driven timing hopper. Manufacturer – Keymac Packaging Systems Ltd. 1 x Keymac vertical form, fill and seal twin bagging machine. Manufacturer – Keymac Packaging Systems Ltd. Model – BT2600 VFFS. Sealing jaws - Unit 1: Vertical - 300mm & Horizontal - 250mm. Unit 2: Vertical - 320mm & Horizontal - 250mm. Electrical requirements – 220-240 V / 60-60 hz / 1 phase. Previously running 210mm wide film. 2 x Forming tubes, each 60mm diameter. Has extension chute for larger packs. Overall dimensions - 1.9m wide x 1.6m deep x 2.1m high. 1 x Outfeed inclined conveyor. Infeed height - 200mm. Outfeed height - 1000mm. Belt dimensions - 3m long x 195mm wide. System footprint - 7.5m long x 3.4m wide x 4.4m high. Isdpfx Ajy An I Ijd Neba

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce multipacks of crisps. System comprises of: 1 x Feed hopper and steps/gantry. 1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. Manufacturer – Comek s.r.l. 1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Manufacturer – Comek s.r.l./Propema S.r.l. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide. 1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Manufacturer – Markem-Imaje. Date of manufacture – 2021. 1 x Flash label applicator (never used / required for seller's products). Isdpjyvac Asfx Ad Njba 1 x Hole punch (3mm) to help deflate the multipack bags into large boxes. 1 x Comek s.r.l. outfeed inclined conveyor. Manufacturer – Comek s.r.l. Belt width - 400mm wide. Conveyor length - 1800mm long. 1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet). This system was producing bulk multipack bags of 3 x different flavours of bags of crisps. Speed - up to 18 packs/minute. Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan).

Year of construction: 2019, condition: excellent (used), functionality: fully functional, REF: MM6372 Ijdjynnliopfx Ad Neba Polar Systems Ltd bulk hopper, vibratory table, base stand, bucket elevator and diverter. Ideally suited for snack / pellet products. Manufacturer – Polar Systems Ltd. Date of manufacture – 2019. Bucket elevator dimensions - 2550mm long x 1250mm wide x 3850mm high. Bulk hopper, vibratory table and base stand dimensions - 2550mm long x 1600mm wide x 3400mm high.

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 Ibedpfx Adexd Thme Noa 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ ✅ Manufacturer - Sparc Systems Ltd. ✅ Model - LCWS. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Year of construction: 2025, condition: excellent (used), 2025 heavy duty stationery hot water pressure wash system. Recently removed from a closed food factory, they had several of these outside the main building to wash separate areas of the factory. 175 bar pressure, 1,260 litres per hour max flow. 8.2Kw motor and 115 Kw boiler. Frost protected to -20 degrees C. This is the newest one which was only used for a short time, we also have two from 2017 and 2019 both in nice condition. Ijdpfx Ajzt N R Nsd Neba

Condition: excellent (used), Year of construction: 2018, 1 x Zumex Food Engineering juice extraction and flitration system with elevator and squeezing kits. Manufactured completely in stainless steel. Technical specification ⚙️: ✅ Manufacturer - Zumex Food Engineering ✅ Model - Z450. ✅ Date of manufacture - 2018. ✅ Hopper capacity - 40 kg.  Performance Specification ⚙️: ✅ Sizes 9-10-11: Heat unit - Kit 9, Oranges/minute - 150.35, Output capacity - 902.4 kg/h, Litres/minute - 6.01 L/min, Litres/hour - 360.84 L/hr. ✅ Sizes 5-6-7-8: Heat unit - Kit 8, Oranges/minute - 133.68, Output capacity - 1145.4 kg/h, Litres/minute - 7.64 L/min, Litres/hour - 458.22 L/hr. ✅ Sizes 2-3-4: Heat unit - Kit 7, Oranges/minute - 116.94, Output capacity - 2338.8 kg/h, Litres/minute - 15.59 L/min, Litres/hour - 935.53 L/hr. PLEASE NOTE - Estimated calculations with a 40% juice performance of the oranges. FRUIT DIAMETER: Minimum:Ø55mm, Maximum:Ø100mm Ibodpfx Ast Uircjd Nea NET/GROSS:  750/960KG DIMENSIONS (L x W x H):  2.5 x 1 x 2.2m CONSUMPTION:  2.010W VOLTAGE: 380 V / 50-60 Hz / 3 phase.

Condition: excellent (used), Year of construction: 2025, Hot fill bottling line - previously used on 500ml microwaveable bottles of soup. Consists of stainless steel bottle unscrambler with hopper and inclined conveyor, 90 degree infeed conveyor, 16 head in-line filler, 3 head inline capper, stainless steel cap unscrambler with hopper and elevated conveyor. Installed new late 2025 and only available label due to the Bankruptcy of contract packer. Ibedjztqfnopfx Ad Nja

Year of construction: 2008, condition: used, functionality: fully functional, MSP 4550 NGI Sample Recovery System Ibedpjznwrdofx Ad Nja Available and ready for immediate dispatch.

Condition: used, This listing is for a Solentim Cell Metric Cell Imaging System The unit is in full working condition and ready for immediate use This cell imaging system is a high-quality lab instrument manufactured by Solentim (Model: Cell Metric). A high-contrast clone imaging system designed to provide accurate and consistent performance for cellular analysis and monoclonality verification. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: Ibsdpozugbnofx Ad Noa As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for a Pall Scientific lm50NCN-B4N Laboratory Filtration System The unit is in full working condition and ready for immediate use This laboratory filtration system is a high-quality lab instrument manufactured by Pall / Pacific Scientific (Model: lm50NCN-B4N). An industrial-grade filtration housing/system designed to provide reliable contaminant removal in bioprocessing or research applications. It has been sourced directly from a working facility, offering premium performance and dependability for standard laboratory applications while ensuring a cost-effective alternative to purchasing brand new equipment. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Ibjdpfszuf Uyex Ad Nsa Integrity: 100% Original Parts (Non-Refurbished)

Condition: excellent (used), Year of construction: 2017, Uncompromised performance and precision: The G3 digital cutting system is based on the most flexible, adaptable, and easily expandable machine concept on the market. Operating hours 2.700 Tools Camera New PC - touch screen UCT KCT EOT-250 CTT1 CTT2 VCT Ibedpfozu Av Uox Ad Nja Router 1Kw Diverse Creasing wheels Diverse perforating knives Belt replaced in 2025 Zund Cut Center updated 2026 Vacum pump replaced in 2026 In production, demo possible upon request

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, The water is pressed through the RO membrane by means of a high-pressure pump. The desalinated water/permeate is then led to consumption via a 1000 litre reservoir. The water containing the concentrated salts/concentrate is led to outlet. The relation between permeate/concentrate shall be adjusted manually on the needle valve. Under normal operating conditions the RO membranes have a long lifetime. But even with a good raw-water quality, layers of impurities will, to a certain extent, occur and there will be a Ibjdpfx Adjzl E Dis Nea slow reduction of the permeate capacity.

Condition: used, functionality: fully functional, Comac LE 20 is a walk behind floor sweeper / scrubber is a walk-behind Iodszl E Afopfx Ad Neba scrubber-dryer designed for maintenance cleaning of commercial surfaces, such as retail outlets and gyms, up to 1400 sq.m

Condition: good (used), mileage: 593,489 km, power: 368 kW (500.34 HP), first registration: 07/2019, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,000 mm, total width: 2,550 mm, total height: 3,890 mm, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - High roof - Manual - Auxiliary drive - Pump - Radio/cassette - Lane keeping assist - Fabric - Auxiliary braking system Number of axles: 3, Configuration: 6x2, Tare weight: 11330 kg, Gross vehicle weight: 27000 kg, Total tank capacity: 380 liters, Trailer coupling, Axle pin diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of locks: 1, Suspension type: Air suspension, Type of cab: High roof, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Parking air conditioning, Parking heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Air conditioning, Seat heating, Bluetooth, Engine power: 368 kW (493 hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Auxiliary braking system, Retarder brand: Intarder, Power steering, ABS, ASR, Auxiliary drive, PTO type: 1, System length: 570 cm, Pump, Hooklift height: 148, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, 6X2-4 LAST AXLE STEERING // INTARDER // HIAB 20T HOOKLIFT OPT20S59 // XXL Transmission Transmission: ZF, 12 gears, Automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 8 mm; Tire tread depth right: 9 mm Axle 2: Tire size: 315/70R22.5; Dual tires; Tire tread depth left inner: 8 mm; Tire tread depth left outer: 8 mm; Tire tread depth right inner: 8 mm; Tire tread depth right outer: 9 mm Axle 3: Tire size: 385/55R22.5; Lift axle; Steered; Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Weights Tare weight: 11,330 kg Payload: 15,670 kg GVW: 27,000 kg Functional Loading platform height: 127 cm Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: €735 per month (default, 60 months); Ask for more information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our offer includes all European brands and price ranges. Why buy from Kleyn Trucks? Simple! Iedpfx Adozua Rve Nsba • Large, rapidly changing inventory • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and send an inquiry via our website. Ask directly about our European warranty package.

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Ijdpfx Aozp E T Sjd Nsba Electrical requirements - 3 phase. Requires compressed air supply. Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: good (used), Year of construction: 2019, REF: MM6469 Ibedpfx Adezp E Sbe Nja Complete tube filling and sealing system, comprising of the following equipment: 1 x Collette high-speed mixer with 2 x mixing bowls (for batches of 150kg mix), pump and piping to feed directly from the bowl to the tube filling/sealing machine. 1 x Axomatic rotary tube filler and sealer. Manufacturer - Axomatic Srl. Type - AXO 1000 MATIC. Date of manufacture – 2019. Speed - 60 to 90 tubes/minute. Fitted with loading hopper, tube selector, detector for missing tubes on the carousel, filler, seal with code in seal, crimper (at top for waste) and exit chute. Supplied with Eurocold glycol chiller, pump, pipework and 2 x pallets of tubes. This unit has had all air pipes replaced. Previously used and set up for icing frosting tubes but the weight and tube size is variable (10g to 120g). Electrical requirements - 3 phase. Maximum air pressure - 8 Bar. Dimensions of AXO 1000 MATIC tube filling system - 2300mm long x 1400mm wide x 2350mm high. Weight of of AXO 1000 MATIC tube filling system - 1100 kg.