Used Aichi Sv 06 Cnl for sale (6,126)

Year of construction: 2015, condition: used, functionality: fully functional, The pneumatic butt welding device, type Sv‑63P, is equipped with a robust vertical frame that includes vertical clamping jaws and a sliding movable plate. Clamping is achieved via tandem cylinders, while the support plate on the static side is isolated from the base frame, which also carries the movable carriages. These carriages are connected to a horizontal cylinder for compressing the workpiece. The carriage movement is limited in both directions—both for compressing and opening—while the distance between the clamping jaws can be adjusted according to the cross-section or diameter of the workpiece. Clamping with the set jaw distance is controlled using foot switches. An additional control cabinet with switches and push-buttons allows for single or simultaneous clamping and supports both manual and automatic welding operations. After welding, the clamping jaws lift, and the carriages return to their initial positions. The welding parameters are set using a controller mounted on the side of the device. The welding voltage is regulated by thyristors, and the power transformer is fully encapsulated and water-cooled, connected to the contact jaws via laminated conductors. Inside the device, a power board with a thyristor and a main control board ensure smooth operation. On the device cover, a compressed air maintenance unit with a pressure regulator is installed to adjust the clamping force. The main switch to activate the unit is located on the controller for setting the welding parameters. Ksdpfx Aoyqr Sxsmpelr

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 30282, functionality: fully functional, Alzmetall AB 32/SV-RFT20 drilling machine with fixed table in very neat condition. Specifications: Drilling capacity in steel ST60: 32/40mm Spindle travel: 160mm Tapping capacity: M24/M30 Spindle taper: MK4 Automatic feed in 3 steps: 0.1/0.2/0.3mm Minimum distance spindle-table: 300mm Maximum distance spindle-table: 950mm Kljdpfxsyanmqe Ampor Distance spindle-column: 300mm Speed: 62-2000rpm variable in 4 steps Table clamping area: 760x770mm Weight: 760kg

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Belt width 400 mm Equipment • drying tower upward Kjdpfx Asd Idlajmpelr • infeed left at the bottom • outfeed 90° at the top

Year of construction: 1997, condition: ready for operation (used), Built in 1997 Size max 320 x 400 x 45 mm min 105 x 145 x 2 mm Speed max 2.500 c/h Equipment perfect binder: • hand fed station Kledpfxod H Itls Ampjr • 6 clamps • hotmelt spine gluing unit • premelter • cover feeder • cover scoring 4 lines • cover pressing station

Condition: new, Year of construction: 2021, machine/vehicle number: KA 8, 2/33/008/21, VO-DA, 2/06/009/21, For sale: one automatic carton erector with volume optimizer. The machines are still in their original packaging and have never been used. Carton Erector: Machine specifications: Machine no.: KA 8, 2/33/008/21 Year of manufacture: 2021 Dimensions (LxWxH): 3,500 x 2,380 x 2,450 mm Weight: 2,100 kg Electrical connection: 400 V, 50 Hz, 12 kW Output: 13 cartons/minute Carton processing: Carton sizes (LxWxH): 385 x 285 x 200 up to 590 x 385 x 350 mm Tolerance for carton sizes: +/- 5 mm Carton quality: single-wall B or C flute Suitable for blanks according to FEFCO 0200 Machine components: Frame Carton magazine (LxWxH): 1,700 x 800 x 1,000 mm, weight 80 kg Carton conveyor Folding unit Gluing station Glue applicator Automatic hot melt supply: 120-litre drum Control and technology: PLC: Siemens S7, ET 200 SP with CPU Operator panel: Simatic HMI TP 700 Comfort on the control cabinet Profinet coupler and Ewon router technology for remote maintenance Volume Optimizer: Machine specifications: Machine no.: VO-DA, 2 Year of manufacture: 2021 Dimensions (LxWxH): 5,600 x 2,200 x 2,960 mm Weight: 2,900 kg Electrical connection: 400 V, 50 Hz, 32.5 kW Output: 11-12 cartons/minute Carton processing: Carton sizes (LxWxH): 400 × 300 × 200/300 mm Tolerance for carton sizes: +/- 15 mm Processing of carton blanks according to FEFCO 0200 Kodoyxmdgjpfx Ampslr Use of lid blanks according to FEFCO 0458, glued onto the carton Machine components: Magazine (LxWxH): 1,700 x 800 x 1,000 mm, weight 200 kg Indexing/transfer station, minimizing station, folding station, and lid application Frame and safety guarding (LxWxH): 1,400 x 1,300 x 1,200 mm, weight 150 kg Automatic hot melt supply: 120-litre drum Control and technology: PLC: Siemens S7, ET 200 SP with CPU Operator panel: Simatic HMI TP 700 Comfort on the control cabinet Profinet coupler and Ewon router technology for remote maintenance

Condition: excellent (used), axle configuration: > 3 axles, loading space length: 15,500 mm, loading space width: 2,740 mm, loading space height: 1,050 mm, total length: 15,500 mm, total width: 2,740 mm, suspension: hydraulics, tire size: 245/ 70R17.5 | load index 146/146F, color: blue, Year of construction: 2003, Colour: Blue Load capacity: 73,500 kg Extendable Main Features Manufacturer: Nooteboom Model: MCO-85-06 V/Z – Double Extendable Chassis number: XMRMC000030000456 Year of manufacture: 2003 Weights/Load Capacities Kingpin load: 27,500 kg Axle load: 11,000 kg Total axle load: 66,000 kg Gross vehicle weight (GVW): 93,500 kg Unladen weight: 20,200 kg Payload: 73,500 kg Axles Axle brand: SAF Hydraulic suspension First axle rigid Axles 2 – 6 with hydraulic steering High/low pressure valve WABCO brake system with EBS Tyres: 245/70 R17.5 | load index 146/146F Dimensions Overall length: 15,505 mm Extension sections: +8,800 mm +8,800 mm Maximum extended length: 31,105 mm Loading platform length: 11,520 mm Maximum loading platform length: 29,120 mm Loading platform width: 2,740 mm Height: 1,050 mm Additional Information NATO connector Hydraulically operated gooseneck Outriggers Double extendable Lashing rings Manual landing gear Electro-hydraulic pump for trailer functions Rear underrun protection with lights 3.5” kingpin Central lubrication system with 2 pumps = Further Information = General Information Year of manufacture: 2003 Axle Configuration Tyre size: 245/70 R17.5 | load index 146/146F Axle make: SAF Suspension: Hydraulic suspension Rear axle 1: Twin tyres; Max. axle load: 11,000 kg Rear axle 2: Twin tyres; Max. axle load: 11,000 kg; Steered Rear axle 3: Twin tyres; Max. axle load: 11,000 kg; Steered Rear axle 4: Twin tyres; Max. axle load: 11,000 kg; Steered Rear axle 5: Twin tyres; Max. axle load: 11,000 kg; Steered Rear axle 6: Twin tyres; Max. axle load: 11,000 kg; Steered Weights Unladen weight: 20,200 kg Payload: 73,299 kg Gross vehicle weight: 93,500 kg Functional Loading height: 105 cm Kodjv E Rchspfx Ampolr Extendable body: Yes Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for more information.

Condition: used, Year of construction: 1999, functionality: limited functionality, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC501, table width: 1,100 mm, table height: 500 mm, table load: 800 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, Manufacturer: Mori Seiki Model: SV-500/40 Dimensions: - Length: 2,350.0 mm - Width: 2,336.8 mm - Height: 2,844.8 mm Weight: 6,600.0 kg Axis travel distances: - X-axis: 800 mm - Y-axis: 510 mm - Z-axis: 510 mm Table dimensions: - Length: 1,100 mm - Width: 600 mm Kjdpfx Aoyymt Dompolr Maximum workpiece weight: 1,000 kg Number of tool stations: 20 Maximum spindle speed: 10,000 RPM Spindle motor power: 22.4 kW Advantages: - High precision and accuracy due to advanced construction and design. - Versatile machining capabilities with a maximum spindle speed of 10,000 rpm, allowing efficient processing of various materials. - Robust construction with a significant weight of 6,600 kg, ensuring stability during operation. - Generous tool storage with 20 tool positions, enabling quick tool changes and increased productivity. - Capable of handling heavy workpieces up to 1,000 kg, making it suitable for large-scale production tasks.

Condition: excellent (used), axle configuration: > 3 axles, first registration: 04/2014, loading space length: 15,870 mm, loading space width: 2,520 mm, loading space height: 1,670 mm, total length: 15,870 mm, total width: 2,520 mm, total height: 1,670 mm, suspension: air, tire size: 385/65R22.5, color: blue, Year of construction: 2014, Color: Blue Payload: 83,122 kg Loading floor height: 167 cm Manufacturer: Nooteboom Type: 0VB-102-06 Ballast Trailer VIN: XMR0VB000E0000166 Year of manufacture: 10-04-2014 Weights: King-pin load: 30,000 kg Axle load: 10,000 kg (each axle) Total axle load: 60,000 kg Gross vehicle weight (GVW): 90,000 kg Unladen (empty) weight: 16,880 kg Payload: 83,120 kg Dimensions: Length: 15,870 mm Loading floor width: 2,520 mm Total height: 1,670 mm King-pin height: 1,350 mm (+/-) Axles: Axle brand: SAF Hydro-pneumatic suspension 1st axle: friction steered 2nd axle: rigid Axles 3 - 6: hydraulically steered Axles 1 & 2: liftable Tyres: 385 / 65 R22.5, Load index: 164K Additional equipment: NATO plug Lashing rings Stake pockets + stakes Wooden loading floor Hydraulic landing gear Toolbox Electro-hydraulic pump for trailer functions Spare wheel with holder Work lights Rear underrun protection with lights King-pin 2.0'' Central greasing system Radio remote control = Further information = Axle configuration Tyre size: 385/65R22.5 Axle brand: SAF Suspension: air suspension Rear axle 1: lift axle; max. axle load: 10,000 kg; steered Rear axle 2: lift axle; max. axle load: 10,000 kg Rear axle 3: max. axle load: 10,000 kg; steered Rear axle 4: max. axle load: 10,000 kg; steered Rear axle 5: max. axle load: 10,000 kg; steered Rear axle 6: max. axle load: 10,000 kg; steered Kljdpfxsuu Hfao Ampor Weights Unladen weight: 16,880 kg Payload: 73,120 kg GVW: 90,000 kg Condition Technical condition: very good Optical condition: very good Damages: none For more information, please contact Stefan Schaapveld.

Year of construction: 2018, condition: ready for operation (used), Comp Air screw compressor incl. refrigeration dryer Comp Air screw compressor L 06 5.5 kW Year of manufacture: 2018 10 bar Klodpfjy Amknjx Amper Delivery rate: 0.67 m³/h Refrigeration dryer PT 9

Condition: new, Year of construction: 2021, functionality: fully functional, !Machine like new, only 600 hours! HEIDENHAIN 640 Table 1300X700 Kjdpfxowx Nkcj Ampolr X, Y, Z: X=1220 Y=710 Z=630 Spindle revolutions 60-10000 24 positions tool changer. Machine dimesnions 3200 X 3900 X 2490 Machine weight 9500 KG

Condition: good (used), Year of construction: 2019, operating hours: 10,955 h, load capacity: 3,000 kg, lifting height: 4,300 mm, fuel type: gas, mast type: triplex, construction height: 2,200 mm, Toyota 06-8FG30F Triplo 430 Freelift / Sideshift LPG 2019 Video can be sent via WhatsApp. Continuous stock, see website. Prices ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without warranties. (see our general terms and conditions) You can arrange a viewing and/or test drive without obligation. Kljdpfx Ajymyhgempor Please call ahead, as we are not always present on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Single-column Eccentric Press MÜLLER GEFREES Type 60 SV DK (Identical to ExP60) Very lightly used eccentric press in original condition Machine No. 5250686 Year of manufacture: 1986 Nearly new condition Press force: 60 tons Throat depth: 280 mm Table surface: 740 x 560 mm Ram surface: 385 x 200 mm Through-hole in table: 300 x 200 mm Table surface (intermediate plate): 740 x 560 mm Through-hole in intermediate plate: Ø 103 mm Intermediate plate thickness: 70 mm Clamping pin bore: 40 mm Table height above floor: 815 mm (with intermediate plate) Installation height, max.: 275 mm (with intermediate plate) Kledpfei A A Tbjx Ampor Installation height, max.: 345 mm (without intermediate plate) Stroke adjustment: 10–90 mm Ram adjustment: 60 mm Strokes per minute: 100 Motor power: 3 kW Drive: 380 Volt, 50 Hz - Mechanical rotary wedge clutch with pneumatic actuation - Spring-loaded single-jaw brake, controlled by cam disc - Stroke release via pneumatic footswitch - Overload protection with breaking plate in the ram - Table height adjustment via 2 threaded spindles - Manual central lubrication system by BEKA Schmiertechnik - Operating manual and pneumatic diagram included Space requirement (L x W x H): 1400 x 1100 x 2200 mm Weight: 3.4 tons In very good, almost new condition

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Kodjhx R Etopfx Ampjlr Net weight approx. 5 tons Good condition – not electrically operational

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Power: 90 kW Kledpfxjkucxls Ampsr Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,000 kg, table width: 600 mm, table length: 1,100 mm, overall weight: 6,600 kg, spindle speed (max.): 10,000 rpm, Manufacturer: Mori Seiki Model: SV-50 Control: MSC 516 MB Axis: 3+2 (Nikken) X / Y / Z Travel: 800 × 510 × 510 mm Table size: 1100 × 600 mm Max. table load: 1,000 kg Spindle: BT40 & 30 positions Spindle speed: 10,000 rpm Tool changer: 20–30 stations Ksdjyuw Akopfx Ampjlr Machine weight: approx. 7,000 kg Availability: From June SOLDE GmbH specializes in the purchase, sale, dismantling, and loading of industrial machinery. With our expertise, we also handle the entire process, including disassembly, transport preparation, and export. We operate our projects throughout Europe, primarily with large machine tools such as machining centers, milling machines, and boring mills.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 2,910 h, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,700 mm, load center: 600 mm, fuel type: gas, mast type: triplex, motor manufacturer: Toyota, gearing type: automatic, fork length: 1,200 mm, tire condition: 80 %, front tire type: superelastic tires (black), overall weight: 4,720 kg, empty load weight: 4,720 kg, total height: 2,260 mm, total length: 2,750 mm, total width: 1,240 mm, maximum load weight: 3,000 kg, fuel: liquid petroleum gas (LPG), Equipment: adjustable boom, lighting, pallet forks, sideshift, Promotion New price: 14,900 EUR. Previous price: 17,900 EUR. We offer forklifts fully serviced and ready for immediate operation. Each machine is thoroughly prepared for the end user. We can organize delivery throughout Europe and worldwide. ===== WhatsApp in English: available from 9:00 to 21:00 WhatsApp auf Deutsch: zwischen 9 Uhr und 21 Uhr WhatsApp en français: entre 9 heures et 21 heures WhatsApp на французском языке: с 9:00 до 21:00 ===== We are a company specializing in four-way forklifts, side loaders, and counterbalance forklifts. Our team includes qualified professionals with over 20 years of experience in the forklift and construction machinery sector. We employ the best mechanics in the forklift industry in Poland and have many satisfied customers across Europe. Additionally, we are a manufacturer of EPAL EUR pallets, known for outstanding quality and reliable, on-time deliveries. Prior to delivery, every machine is comprehensively tested and receives a complete service inspection. All necessary repairs are performed to ensure the customer receives a forklift in work-ready condition. Kodpfx Amjy Awbqopelr In Poland, upon request, we can arrange equipment inspection and certification by the State Office of Technical Inspection. Our company’s main mission is to satisfy our customers and resolve their logistical challenges. We know how to properly prepare equipment so that our clients are satisfied and eager to recommend us to others. We invite you to contact us and take advantage of our services. Looking for a reliable forklift supplier? Contact us today.

Condition: used, Year of construction: 2004, Urban Corner Cleaner type SV 530 Kjdeylitvopfx Ampelr

Condition: good (used), Urban Corner Cleaner type SV 815/4 Kedpfjlx Ar Asx Ampjlr

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 40 mm throat 345 mm Klodpfsv Ehftox Ampjr bore stroke 200 mm table surface area 720 x 5 mm

Condition: new, 20 mm 40 mm MK 4 spindle stroke 160 mm throat 300 mm column diameter 145 mm 615x430 mm 2x14x224 mm distance spindle /table 147/688 mm feed 0,1-0,2-0,3-0,4 mm/U Kodpoyv Nxbofx Ampolr 140-4000 U/min. total power requirement 4,0 kW Machine height 1885 mm Standard equipment: - Electromagnetic feed clutch with overload protection and electrical    Cross Handle Switches - Control and light transformer - Main switch lockable - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Clockwise rotation by contactor control - Speed adjustment stepless - Speed display digital - Speed setting electrically - Protection IP 54 - Motor insulation class "F" - Spindle protection with electrical protection

Condition: used, Year of construction: 1993, bore capacity in steel (diameter) 40 / 23 mm throat 320 mm bore stroke 180 mm 4 speeds 30 - 765 U/min table-size 720 x 550 mm weight 480 kg dimensions 750 x 900 x 1900 mm Equipment: - Multi-spindle head, drill Ø 23 mm - automatic feed Kljdjyfwzujpfx Ampjr - coolant device - infinitely variable speed - adjustable drilling depth stop

Condition: reconditioned (used), Year of construction: 2015, Refurbished BUSCH SECO SV 1040 C 000 INXX 1.25 kW motor P max = 120 hPa (mbar) V max = 40 m3/h Weight approx. 40 kg Klodpfow Sm A Isx Ampor

Condition: good (used), Year of construction: 2007, Anritsu SV Checkweigher Serial: 4600060685 Ksdsualy Sjpfx Ampolr 2007, Stainless checkweigher, belt dimensions 900mm x 250mm, checkweigher platform 220mm x 250mm, from 12g - 3000g, 1Ph

Year of construction: 2010, condition: good (used), 1 x Mondial Forni Dough Divider Model: SV Asda Serial Number: M10SV011 Year: 2010 Located in West Yorkshire, UK UKFM2-5967 Kledpfx Astxy Evompjr

Condition: new, Bernardo Gear Column Drilling Machine GHD 28 SV with Digital Depth Display Technical Specifications - Maximum drilling capacity: 28 mm - Maximum thread cutting: M12 Klodpjd Err Uefx Ampjr - Quick-release drill chuck: 1 – 16 mm / B 16 - Morse taper: MK 3 - Spindle speed (8): 75 – 3010 rpm - Feed range: 0.004 / 0.006 / 0.009 / 0.012 / 0.10 / 0.15 / 0.30 mm/rev - Throat: 320 mm - Max. spindle to table distance: 810 mm - Spindle to baseplate distance: 1230 mm - Quill stroke: 150 mm - Column diameter: 105 mm - Baseplate working area: 325 x 360 mm - Table size / T-slot size: 500 x 350 mm / 14 mm - Motor output S1 100%: 0.90 / 1.2 kW (400 V) - Motor input S6 40%: 1.35 / 1.7 kW (400 V) - Machine dimensions (W x D x H): 600 x 700 x 1900 mm - Weight: approx. 290 kg Features • Digital quill stroke display for convenient operation • Supplied as standard with automatic quill feed (0.04 – 0.3 mm/rev) • Helical gear transmission for optimal power transfer • High efficiency and smooth operation thanks to helical gears with steel reinforced fiber material • Automatic quill feed disengages when preset drilling depth is reached • Directional switch for clockwise and counterclockwise rotation for thread cutting • Stable, ground steel column designed for heavy-duty use • 8 switchable speeds via powerful two-stage drive motor Scope of Delivery • Quick-release drill chuck 1 – 16 mm / B 16 • Drill chuck arbor MK 3 / B 16 • Reducing sleeve MK 3 / 2, MK 3 / 1 • Digital drilling depth display • Automatic tool ejector • Forward/reverse switch • Height adjustable safety guard