Used Access Flap Flap Element for sale (6,781)

Condition: used, maximum load weight: 35,750 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Braking system according to ECE-R13 Electrical system according to ECE-R48 The Kögel superstructure guideline must be observed! It can be accessed at [website address] Frame Chassis frame made of high-quality steel, but without an outer frame Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended), b) 2 x 20' ISO containers (frame extended), c) 1 x 30' ISO container flush at the rear (frame extended), d) 1 x 20' ISO container flush at the rear (frame retracted), e) 1 x 20' ISO container in the middle (frame retracted) 4 pairs of heavy-duty lashing rings Frame extension at the rear, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable, adjustable in length via 1 pneumatic cylinder, low-maintenance guide on special plastic sliders and 2 extension rollers Automatic pneumatic locking of the extension Suspension Axle lift mechanism on axle 1 Control of the axle lift fully automatic, load-dependent Starting aid: activation via 3x brake, 30%, overload up to a speed of 25 km/h Operation on the chassis via switch, also possible from the driver's cab (switch in the cab required - PIN 12) Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, ET 120 Air suspension with approx. 180 mm travel Vehicle tires Tires 6-fold 385/55 R 22.5, 160J 6 steel rims 22.5 x 11.75, offset 120 mm (ET 120) Chassis components Landing gear, mechanical with leveling foot, 24 t lifting capacity, single-sided operation on the right-hand side while driving Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with spray flaps 2 chock blocks with bracket Nedpfjzkx Ifjx Aqwolf Lateral protection device, according to ECE-R73, closed Underrun protection made of square steel tube according to ECE-R58 with a light carrier arranged above, protected Height of the underrun protection profile min. 120 mm, designed for increased test forces Brake / Air suspension system EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connection cables), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection Air suspension system incl. 1 raising and lowering valve, mounted on the left-hand side in the direction of travel in front of the axle unit 2 non-interchangeable coupling heads at the front ISO 1728 Air tanks for braking system and air supply made of steel (EN 286-2) Rear impact guard Solid steel rear impact guard on the rear end cross member Electrical system / Electronics Light carrier made of steel, arranged above the underrun protection KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED side marker lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the lights 2 LED outline lights with arm, mounted on multi-chamber tail light 2 LED multi-chamber tail lights (without LCG) Plug connection at the front, 15-pole ISO 12098 (without connection cables) Corresponds to vehicle class FL, AT Information systems Kögel Telematics System BasicTrailer incl. location monitoring, coupling status, EBS data The monthly fees are regulated in a separate contract Signage Orange

Year of construction: 1998, condition: used, functionality: fully functional, Grinding master 2000 This is A polishing machine with a 900mm wide table. It has the capability of polishing stainless steel from a hot rolled finish up to a highly polished finish. A wide range of polishing belts are available for this machine, ranging from 60 grit to 400 grit and for a wide range of materials. Nsdpfx Aqezlubdjwelf It comes complete with an air filtration system, that extracts the polishing dust and particles through a water trough. that captures the dust and particles. The clean filtered air is exhausted back into the building. This means that the Grindingmaster can be located in any position in a building without the need for outside venting. This system also comes with a customised racking system for the safe storage and easy access to the polishing belts. It also comes complete with a Surface Measuring Device, which can accurately measure and verify the desired surface finish.

Condition: as good as new (ex-display), Year of construction: 2026, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing - Rear access flap for maintenance Nledpfszi Evgsx Aqwsf - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Spindle holder DIN 6350 A2-3 Spindle bore Ø 46 mm Coolant system Coolant pump output 95 W Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: excellent (used), Year of construction: 2022, Binder BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not a regular laboratory incubator, but a high-quality safety test chamber, specifically developed for aging, performance, and safety tests of lithium-ion energy storage systems. Special Added Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events – up to EUCAR Hazard Level 5 (fire/flames, but no explosion). Device Capabilities (Section 2 – Performance & Application): - Aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Temperature endurance and thermal cycling tests - Testing of both unpowered and cycled cells - Reproducible, precise temperature control throughout the usable chamber - Safe testing under realistic thermal conditions - Test environment for R&D, automotive, e-mobility, and energy storage applications Suitable for: - Battery and cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-mobility / Energy storage sectors P Plus Package turns the KB 720 into a dedicated battery safety test cabinet: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking (secure containment) - Spark protection in the chamber - Exhaust port with reversible overpressure flap Nodsziznfepfx Aqwolf - Ports for external inertization (e.g., nitrogen) - Emergency stop / manual triggering of suppression system - Access ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction test device, but rather a safe, standard-compliant chamber for real-world operating and fault scenarios. Technical Data: - Temperature range: –10°C to +100°C - Interior volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse rating: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In summary – What makes this device special: - True battery safety test chamber - EUCAR Hazard Level 5 compliant - Integrated CO₂ suppression system - Large chamber (≈700 l) - High market and resale value - Weight: approx. 285–300 kg Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors. All details without obligation!) For further questions, we are happy to assist you by phone.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,228 kg, maximum load weight: 29,772 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,350 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Custom Transport Solution Configure your Fliegl trailer to your exact requirements. The vehicle shown is for illustration only. Production and equipment are tailored to customer specifications. Chassis Lightweight high-tensile steel welded chassis with replaceable 2" kingpin. Patented curved front design. 24 t two-speed landing gear with single-side operation. Rear swing clearance approx. 2,100 mm (rear position) / 2,600 mm (front position). 2 wheel chocks with holders. Aluminium side underrun protection. Pneumatically folding rear underrun guard. Half-shell mudguards with anti-spray flap on the last axle. Rear towing hook. Axles & Suspension Nedpfxjzl Ez Uo Aqwslf SAF 430 mm disc brake axles in off-road specification. Laser-aligned axle/suspension system for reduced tyre wear and fuel consumption. Air suspension with air pressure gauge. Automatic first lift axle with forced lowering and traction aid, also electrically operated from the tractor. Hot-dip galvanized lift axle mechanism with 10-year anti-corrosion warranty. Braking System Dual-line air brake system with colour-coded air lines. Spring parking brake. 24 V EBS with front socket. Raise/lower valve. Electronic Stability Program (ESP). Automatic tipping lowering system with shut-off valve. TPMS (ECE R141) via EBS with display in the tractor. Axle load indication via EBS CAN bus. Tyres 385/65 R22.5. Electrical System 24 V LED lighting. LED front position lights. LED rear marker lights. LED side marker lights. 2 × 7-pin and 1 × 15-pin front sockets. Two recessed LED rear work lights. Hydraulics Low-pressure tipping cylinder (max. 170 bar), hard chrome-plated first stage. Hydraulic operation via PTO. Hydraulic connection with 48 mm HDK screw coupling. Body Round steel body in Stone Master Design, manufactured from wear-resistant HB 400/450 steel. Sloping front wall with external hydraulic cylinder mount. Internal front access ladder. Aerodynamic Greenline tapered body design. External shovel and broom holder. Hydraulic rear tailgate with approx. 2,200 mm opening height. Tailgate protection cover and rubber seal. Heat-resistant up to 170°C. Side walls 4 mm, floor 4/5 mm, weight-optimised wear-resistant construction. Cover System Fliegl S.T.E.P. swivelling front platform with folding access ladder (left side), in combination with Flip Top sliding cover. Electrically operated Flip Top cover with automatic rear locking bow, operated from the trailer or via radio remote control. 7-pin spiral cable to tractor included (tractor socket required).

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035389, empty load weight: 3,160 kg, maximum load weight: 34,840 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 90 %, color: grey, The images are archive images! The vehicle may still be in use! Fine-grained steel welded construction, fifth wheel coupling with interchangeable 2" kingpin (Chassis prepared for subsequent retrofitting, drip tray, 4 x hose holders, footboards, Fliegl standard) Container fittings: 1 x 20 ft in the center (or swap body container 7.15 / 7.45 / 7.82), not retractable at the front, the pivot pins of the container locking mechanism in the longer version. 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Chocks with holder Side underrun protection Rear underrun protection with deep step for easier access + footboard inside Semi-elliptical fenders with anti-spray flaps according to EC Axles + Suspension BPW or SAF disc brake axles at the manufacturer's choice, with 430 mm disc diameter, "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! Nledpfxey Tvuwo Aqwsf with lifting and lowering valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, the truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, (Note! with certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable additional LED work lights at the rear, switched via reversing light Operating instructions This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration/Signage Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side, yellow at the rear The images are archive images! The vehicle may still be in use!

Condition: used, maximum load weight: 13,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2021, next inspection (TÜV): 02/2027, loading space length: 5,200 mm, loading space width: 2,400 mm, loading space height: 600 mm, Year of construction: 2021, Equipment: ABS, Well-maintained and rarely used three-sided tipper with a low-loader design. Features: Combination door and hinged flap at the rear Spring-assisted lifting mechanism on the side walls Side walls with hinged support Aluminum access ramps stored under the tipper Nledpfxoznhr Ij Aqwef Numerous lashing points Tire condition: approx. 70% Please call for any questions regarding the equipment. Errors and prior sale excepted!

Condition: used, mileage: 258,050 km, power: 105 kW (142.76 HP), first registration: 12/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,932 mm, total width: 2,020 mm, total height: 2,633 mm, loading space length: 3,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 6920X ----Why autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options available. Full vehicle range available on autonext? Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent condition! 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively at Mercedes Benz Next service in 541 days Taxi Taximeter Wheelchair accessible conversion Wheelchair lift "DHOLLANDIA" (350 kg) Taxi sign on the roof Number of seats: 5 Rail system for rear seats Electr. running board Wheelchair securing system Rear view camera Parking aid front and rear Navigation system Air conditioning Cruise control Blind spot assistant ---- Special features: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Steering wheel with multi-function buttons * 2nd battery (auxiliary battery) in engine compartment * Exterior mirrors, electrically foldable * Exterior mirrors with blind spot assistant * DAB tuner (digital radio reception) * Driving assistance system: Attention-Assist (fatigue detection sensor) * Speed control system (cruise control) * Cupholders in front * Hold function * Folding cover for storage compartment * Connection strip for electrical connections (driver's seat box) * Air conditioning, controlled (Tempmatik) * Fuel tank: main tank 93 liters * Radiator grille frame in vehicle color * Navigation system for MBUX multimedia system * Parameterizable special module * Spare wheel in driving condition * Spare wheel carrier under the end of the frame incl. jack * Rear view camera * Windshield wipers with rain sensor * Mud flaps in front * Seats in the cab: Driver's seat with lumbar support * Seats in the cab: Comfort suspended seat, passenger side * Seats in the cab: Comfort suspended seat, driver side * Separating relay for additional battery * Running board under the sliding door on the right (electric) Nodpfx Asxmhk Uoqwelf * USB port in the center under the dashboard (charging function only) * Front axle reinforced * Additional indicator lights at the rear (roof) Standard features: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, storage: luggage net on the rear doors, storage net on the front seat backrest left, storage net on the front seat backrest right, towing eye at the rear, adaptive brake light, airbag passenger side, airbag driver side, hill start assist, anti-lock braking system (ABS), traction control (ASR), drive type: rear-wheel drive, display for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both, exterior temperature display, body type: combined version, brake assistant, roof liner, roof liner in the cab, automatic switch-on for driving lights, electronic brake force distribution (EBV), electronic stability program (ESP), driving assistance system: side wind assistant, windows for rear doors, window in the cargo/passenger compartment: - fixed, rear left, window in the cargo/passenger compartment: - fixed, rear right, window in the cargo/passenger compartment: - fixed, front left, window in the cargo/passenger compartment: - fixed, front right, electric windows 2-fold, transmission automatic GTronic - (7-speed), heated rear window, rear door (opening angle 180 degrees), body/structure:

Condition: used, mileage: 199,050 km, power: 125 kW (169.95 HP), first registration: 12/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 8, total length: 5,932 mm, total width: 2,020 mm, total height: 2,644 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 2166X ----Why Autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually – top customer ratings. Attractive financing and trade-in options available. Complete vehicle range on autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition 1st owner, German vehicle, non-smoking vehicle Complete service history, only serviced at Mercedes-Benz Wheelchair-accessible conversion Wheelchair lift "Autolift" Roof air conditioning in the passenger compartment Number of seats: 8 Electric step Wheelchair restraint Wheelchair space Parking package with rearview camera Regulated air conditioning (Tempmatik) Navigation system for MBUX multimedia system Speed control system (cruise control) Electrically folding exterior mirrors with blind spot assist Parameterizable special module Active brake assist Seat heating Roof flashing lights Tinted windows Upon request, we offer an additional trailer hitch for only 599 euros, and if possible, an increase in the trailer load to up to 3.5 tons. ---- Special equipment: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Steering wheel with multi-function buttons * Parking package with rearview camera * Rearview camera * 2nd battery (additional battery) interior Nsdpfoyh S Husx Aqwelf * 3-button remote control for central locking * Acoustic package * Hill start assist * Armrest, driver and passenger door * Exterior mirrors, electrically foldable * Exterior mirrors with blind spot assist * DAB tuner (digital radio reception) * Entry lights * Driving assistance system: active brake assist * Driving assistance system: high beam assist * Suspension: stabilization level I * Generator 250 A * Speed control system (cruise control) * Rear door (opening angle 270 degrees) * Folding cover for storage compartment * Folding covers for storage compartments left/right * Connection strip for electrical connections (driver's seat box) * Regulated air conditioning (Tempmatik) * Air conditioning in the cargo/passenger compartment * Fuel tank with misfueling protection * Fuel tank: main tank 93 liters * Marker lights on the sides * Navigation system for MBUX multimedia system * Fog lights with cornering lights * Parameterizable special module * Reversing warning, audible (warning signal outside) * Mud flaps, rear * Seats in the cab: passenger seat heated * Seats in the cab: driver's seat heated * Seats in the cab: driver's comfort seat * Seats in the cab: driver's seat with lumbar support * Fuel tank cover, red * Battery isolation relay * Rear window, tinted / black glass * Reinforced front axle * Thermal insulation cargo/passenger compartment * Additional flashing lights, rear (roof) Standard equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, storage compartments: luggage net on the rear doors, storage net on the front seat backrest left, storage net on the front seat backrest right, towing eye, rear, adaptive brake light, airbag, passenger side, airbag, driver side, anti-lock braking system (ABS), drive type: rear-wheel drive, exterior mirrors, electrically adjustable and heated, both, outside temperature display, body: station wagon, headliner, automatic switch-on for driving lights, electrical

Condition: used, mileage: 15,634 km, power: 229 kW (311.35 HP), gearing type: mechanical, fuel type: diesel, color: yellow, overall weight: 23,200 kg, empty load weight: 23,200 kg, maximum load weight: 15,000 kg, axle configuration: 4x4, number of seats: 1, first registration: 03/2016, brakes: engine braking, Year of construction: 2016, operating hours: 15,634 h, driver cabin: day cab, Equipment: additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, head guard, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, standard shovel, * German vehicle * Wheel loader test according to §14 completely available * Condition, see photos * original ONLY 15,634 BH * Driver's cab rollover protection ROPS / stone chip protection FOPS * ROPS/FOPS meet the requirements of the standards ISO 3471:2008 and ISO 3449:2005 Level II * Turning circle (diameter) (counterweight) 6,804 mm * Small turning circle due to articulated steering * Fuel tank 302 liters * Axles, front axle with manually operated differential lock, rear axle with open differential * Brakes, fully hydraulically encapsulated oil bath disc brakes with integral braking system (IBS) * Planetary powershift transmission (4V/4R), automatic * Detect technologies: rear view camera Cat rear object detection * Immobilizer * Air conditioning, heating and defroster (automatic temperature control and fan control) * Driver's cab with pressurized ventilation and sound insulation (ROPS/FOPS) * Electro-hydraulic control levers, single-axle lever for lifting and tilting function * Electro-hydraulic parking brake * Ergonomic ladders and handrails for cabin access * Warning horn, electric * External rear-view mirror with integrated blind spot mirrors * Multifunctional 18 cm color touchscreen display for image display of the rear view camera, time and machine parameters * Radio including antenna, loudspeaker * Seat with fabric cover, air-suspended * Steering joystick, electro-hydraulic, speed-dependent with force feedback * Sliding window (left and right) * Reverse warning signal * Fender, sheet steel, front with mud flap and rear with extension * Engine hood (plastic) with electric tilting device * Sight glasses: engine coolant, hydraulic oil and transmission oil level * Working hydraulic pump type adjustable piston * ? Maximum travel speed of the standard machine with empty bucket and standard tires (L3) with a rolling radius of 826 mm. * Speed with gears: Forward 1 6.5 km/h Forward 2 13.0 km/h Forward 3 23.5 km/h Forward 4 39.5 km/h Reverse 1 7.1 km/h Reverse 2 14.4 km/h Reverse 3 25.9 km/h Reverse 4 39.5 km/h * Operating weight 23,220 kg If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired. Nedovzav Nspfx Aqwjlf   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: new, overall weight: 30,000 kg, axle configuration: 2 axles, loading space length: 13,590 mm, loading space width: 2,500 mm, loading space height: 1,820 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Burgers Double Deck Trailer | 2-Axle Steered NEW More volume. Lower costs. More sustainable transport. Up to 60% more loading space compared to standard trailers. In many cases, replaces 3 trailers with 2 double deckers, reducing CO₂ emissions by up to 40%. Technical Data (Model: 2-axle steered) Chassis and Running Gear Design: 2-axle, steered * Axle system: TRIDEC TF-V02, mechanical steering without electronics * Air suspension with low-maintenance bushings, lift range +160 mm / -105 mm * Axle spacing: 1,400 mm * Axle load: 2 × 9,000 kg = 18,000 kg * Permissible gross weight: 30,000 kg (12,000 kg kingpin load + 18,000 kg axle load) * Tyres: 4 × Goodyear 385/65 R22.5 on steel rims * Wheelbase and axle position adjustable according to loading scheme * Wheel housings with wear blocks and anti-spray mudflaps * Fully hot-dip galvanized chassis to ZINQ standard Brake and Safety Systems WABCO 2-line air brake system * Drum brakes 420 × 180 mm * ABS/EBS-E with ECAS (level control), ELEX, and RSS (electronic stability control) * Visible indicator lights for ABS/EBS and ECAS Dimensions External dimensions (L × W × H): 13,820 × 2,550 × 4,045 mm * Upper deck internal dimensions: Length 13,590 mm × Width 2,500 mm × Height 1,820 mm * Lower deck internal dimensions: Length 9,940 mm × Width 2,500 mm × Height 1,820 mm * Lower deck height from ground: 320 mm Nodpfx Aew I Iinoqwjlf Bodywork and Materials Side walls: 21 mm plywood, coated inside and out with white polyester * Front wall: 24 mm plywood, both sides polyester white * Roof: 30 mm insulated polyester panel, white, with rainwater drainage * Floors: Aluminium profiles (top and bottom), non-slip, grey coated * Stainless steel front and corner profiles, L-profiles on side flaps Access and Operation Three side flaps (battery compartment, lift/smartboard control, technical access) * Multi-deck lift Dhollandia DH-VH (2,500 kg lifting capacity, hydraulic folding tip, LED platform lighting, foldable handrails and ramps) * Lift control: external operation on the right, integrated into the fence * Spare wheel not included Electrics and Lighting LED interior lighting upper and lower deck * Complete LED exterior lighting: position, marker, reverse, and work lights * Additional LED for platform lighting * Power supply via 2 × 230 Ah batteries, charging via tractor unit * Main switch behind side flap, coupled with lift control * WABCO Smartboard: weight display, odometer, adjustable loading/unloading heights Finish and Paintwork External colour: RAL 1003 yellow (non-metallic) including wheel wells, stainless steel front and rear * Reflectors: 3M partial contour marking (white sides, red rear) * Advertising space possible (optional) Benefits 60% more loading space – replaces up to 3 standard trailers with 2 double decks * 40% lower CO₂ emissions – eco-friendly and economical * ROI often within just 1 year * Customisable (axles, cooling, dimensions) * Suitable for long-haul and distribution transport Available Configurations at Burgers: 2-axle standard – rigid or steered, 13.60 × 2.55 × 4.00 m * 3-axle standard – rigid or with steered axle * City trailer – max. 11.50 m, always steered * Special dimensions – height up to 4.25 m depending on national regulations * Body: plywood or insulated, optionally with cooling and temperature zones * Extras: tail lift, hydraulic ramp, solar modules, cameras, aerodynamic profiles, LED packages For further information, we are happy to assist you.

Condition: new, maximum load weight: 25,160 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,480 mm, loading space height: 1,380 mm, total width: 2,550 mm, total height: 1,410 mm, Year of construction: 2026, Equipment: ABS, Wiese Building Material Semi-Trailer Fifth-wheel load: 12,000 kg Axle load: 27,000 kg Permissible gross vehicle weight: 39,000 kg Curb weight: 10,840 kg Loading platform length: approx. 9,200 mm Overall length: approx. 10,600 mm Internal width: 2,480 mm Overall width: 2,550 mm Kingpin 1 position with 2" kingpin Coupling height In horizontal position: approx. 1,160 mm Top edge of main beam (without floor): approx. 1,380 mm Loading height: approx. 1,410 mm Lashing hole external frame D=30 mm with perforated strip at angle Nlodpfjyihg Hex Aqwof (160 mm high / 30 mm floor recess / 4 mm wall thickness), Main beam spacing 980 mm (center/center) - 1,130 mm (outer/outer) Axles 3 axles, each with 9,000 kg load capacity Brand: SAF with disc brakes D=430 mm Track width: 2,040 mm ABS: 1 axle sensed Axle spacing: approx. 1,510 mm / approx. 1,510 mm Suspension Original SAF air suspension, with raise/lower valve with retaining cables Axle lift Lifting axle, 1st axle, automatic load-dependent for starting assistance, controllable via push button in driver’s cab Steering Mechanical forced steering on axle 2 + 3 Two-bar steering / Manufacturer: Tridec Brake system 2-line Wabco compressed air braking system according to EU directive 71/320/EEC etc. with: EBS/ABS 2S/2M with RSS function (Roll Stability Support) and 7-pin socket 1x ISO coupling head yellow 1x ISO coupling head red Spring-loaded parking brake on 2 axles all fitted with quick couplings Aluminum air reservoir Air system Compressed air installation with: 1x raise/lower valve 1x level control valve Aluminum air reservoir all fitted with quick couplings Automatic lowering of air suspension during crane operation Tires 6 units type: 385/65 R22.5" Brand: at manufacturer’s choice Tire pressure monitoring system for all 6 tires, display in driver’s cab Rims 6x steel rim 11.75x22.5", 10-hole, center-mounted, offset: 120mm Support device Mechanical landing legs with T-swivel foot, permitted lift load: 2x 12,000 kg Operable from one side, two speeds Brand: at manufacturer’s choice Wheel covers & mud flaps 6x plastic half-shell wheel covers Mudguard mounting reinforced with flat steel Note: mudguard on steered axle 3 with internal cutout Lighting system 24V lighting system according to EU directive 76/756/EEC etc. with: 2x multi-chamber tail lamps Lane marker lamps License plate lighting LED side marker lamps with indicator function 2x 7-pin and 1x 15-pin connector installed as per EU standard Tail lights mounted in reinforced light carrier = certified rear underrun protection All necessary markings Additional installation: Electrical connection for crane control pre-installed as specified! Safety equipment Side underrun protection and rear underrun protection in aluminum according to EU directives Floor OKULEN floor 32 mm Superstructure Straight front wall, 1,200 mm high, welded solid, consisting of 4x steel profiles, welded to the front plate with aluminum hollow profile as infill Inside a 625 mm high wear plate, galvanized steel Both sides fitted with Kinnegrip stanchions K20/1,100 mm high for through loading Straight rear wall, 1,100 mm high, welded solid, consisting of 4x steel profiles, welded to rear plate and aluminum hollow profile as infill Inside a 625 mm high wear plate, galvanized steel Both sides fitted with Kinnegrip stanchions K20/1,100 mm high for through loading, 2x3 aluminum side walls, 1,100 mm, foldable and lowerable On rear side panels, left and right, folding steps as access and grab ha

Condition: new, maximum load weight: 25,160 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,480 mm, loading space height: 1,380 mm, total width: 2,550 mm, total height: 1,410 mm, Year of construction: 2026, Equipment: ABS, Wiese Building Material Semi-Trailer Fifth-wheel load: 12,000 kg Axle load: 27,000 kg Permissible gross vehicle weight: 39,000 kg Curb weight: 10,840 kg Loading platform length: approx. 9,200 mm Overall length: approx. 10,600 mm Internal width: 2,480 mm Overall width: 2,550 mm Kingpin 1 position with 2" kingpin Coupling height In horizontal position: approx. 1,160 mm Top edge of main beam (without floor): approx. 1,380 mm Loading height: approx. 1,410 mm Lashing hole external frame D=30 mm with perforated strip at angle (160 mm high / 30 mm floor recess / 4 mm wall thickness), Main beam spacing 980 mm (center/center) - 1,130 mm (outer/outer) Axles 3 axles, each with 9,000 kg load capacity Brand: SAF with disc brakes D=430 mm Track width: 2,040 mm ABS: 1 axle sensed Axle spacing: approx. 1,510 mm / approx. 1,510 mm Suspension Original SAF air suspension, with raise/lower valve with retaining cables Axle lift Lifting axle, 1st axle, automatic load-dependent for starting assistance, controllable via push button in driver’s cab Steering Mechanical forced steering on axle 2 + 3 Two-bar steering / Manufacturer: Tridec Brake system 2-line Wabco compressed air braking system according to EU directive 71/320/EEC etc. with: EBS/ABS 2S/2M with RSS function (Roll Stability Support) and 7-pin socket 1x ISO coupling head yellow 1x ISO coupling head red Spring-loaded parking brake on 2 axles all fitted with quick couplings Aluminum air reservoir Nodpfeyl D Eyjx Aqwjlf Air system Compressed air installation with: 1x raise/lower valve 1x level control valve Aluminum air reservoir all fitted with quick couplings Automatic lowering of air suspension during crane operation Tires 6 units type: 385/65 R22.5" Brand: at manufacturer’s choice Tire pressure monitoring system for all 6 tires, display in driver’s cab Rims 6x steel rim 11.75x22.5", 10-hole, center-mounted, offset: 120mm Support device Mechanical landing legs with T-swivel foot, permitted lift load: 2x 12,000 kg Operable from one side, two speeds Brand: at manufacturer’s choice Wheel covers & mud flaps 6x plastic half-shell wheel covers Mudguard mounting reinforced with flat steel Note: mudguard on steered axle 3 with internal cutout Lighting system 24V lighting system according to EU directive 76/756/EEC etc. with: 2x multi-chamber tail lamps Lane marker lamps License plate lighting LED side marker lamps with indicator function 2x 7-pin and 1x 15-pin connector installed as per EU standard Tail lights mounted in reinforced light carrier = certified rear underrun protection All necessary markings Additional installation: Electrical connection for crane control pre-installed as specified! Safety equipment Side underrun protection and rear underrun protection in aluminum according to EU directives Floor OKULEN floor 32 mm Superstructure Straight front wall, 1,200 mm high, welded solid, consisting of 4x steel profiles, welded to the front plate with aluminum hollow profile as infill Inside a 625 mm high wear plate, galvanized steel Both sides fitted with Kinnegrip stanchions K20/1,100 mm high for through loading Straight rear wall, 1,100 mm high, welded solid, consisting of 4x steel profiles, welded to rear plate and aluminum hollow profile as infill Inside a 625 mm high wear plate, galvanized steel Both sides fitted with Kinnegrip stanchions K20/1,100 mm high for through loading, 2x3 aluminum side walls, 1,100 mm, foldable and lowerable On rear side panels, left and right, folding steps as access and grab ha

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C Njdpfx Aqjzq Axzswslf • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components TYPES OF PAINTS • Solvent-based paints • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Condition: used, mileage: 100 km, power: 125 kW (169.95 HP), color: blue, gearing type: mechanical, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure that you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Nedpfxszr Twdj Aqwslf Henschel flatbed truck with aluminum sideboards Ladder support behind the cab Dimensions approx. 4,300 x 2,020 mm BA3 Active Brake Assist, C6L Multifunction steering wheel, C6L Multifunction steering wheel, C71 Underrun protection device according to EC regulations, C72 Bumper and corner elements paintable, CB8 Stabilization Level II, CL1 Steering wheel adjustable in inclination and height, CM9 Painted components, pure white MB 9678, CN2 Radiator grille frame in vehicle color, CW2 Omission of vehicle lowering, E07 Hill start assist, E1D digital radio (DAB), E1E Navigation, E1U USB socket 5 V, E2A Take-off for ABH special signals in the cockpit, E3J Pre-installation for switch panel, E57 Electrical system for trailer socket, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, EK1 Terminal block for electrical connection, ES0 Jump start assistance Contact, EW6 Pre-installation for Remote Services Plus, EY2 Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F49 Heated windshield, F68 Heated and electrically adjustable exterior mirrors, FF5 Storage compartment above the windshield, FG8 Front cup holder, FHS CAB, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under the cockpit, FJ5 Folding cover for storage compartments left and right, FQ6 Lockable compartment in storage space above the windshield, FR7 PRE-INSTALLATION ELECTRICAL SYSTEM REVERSING ASSIST, FS1 Mirror holder, extended, GD8 6-speed manual transmission ECO Gear 360, H1I Wide-angle nozzles in the instrument panel, H21 Heat-reflective glass with band filter on the windshield, HH9 SEMI-AUTOMATICALLY REGULATED CLIMATE CONTROL SYSTEM TEMPMATIC, IF3 Chassis with cab, IR6 Wheelbase 4325 mm, overhang 1615 mm, IT4 3.5-ton truck, J10 Speedometer km/h, J1V Pre-installation for blind spot assist for body builders, J55 Belt warning system for passenger seat, J58 Belt warning system for driver's seat, J65 Outside temperature display, JA8 Crosswind assist, JA9 Traffic sign assist, JB4 Active lane keeping assist, JF1 Rain sensor, JG0 Gear shift indicator, JH3 Communication module (LTE) for digital services, JI7 Start-up mileage maintenance interval 60,000 km, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, KB7 Main tank 93 liters, L LEFT-HAND DRIVE, L07 Outline lights, L72 Electrical system for external superstructure, L76 Rear light wiring harness extended, L94 Omission of parking light, LA2 Headlamp assistant, LB1 Lateral marker lights, LE1 Adaptive brake light, LV6 Pre-installation for electrical system for 3rd brake light, M60 Generator 14 V / 250 A, MJ8 ECO start-stop function, MS1 Cruise control, MT5 EMISSIONS CLASS EURO 6e RDE5 N1, MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800/min, O7L Rear blind spot radar, X to rear axle 300 +/-100 mm, O7P Rear blind spot radar, additional X to rear axle +1000 mm, O94 WIDTH OF SUPERSTRUCTURE OUTER EDGE 2150 MM +/- 50 MM, P47 Front mud flaps, Q11 Longitudinal beam reinforcement, Q18 Rear crossbeam screwed on, RH2 Tires 235/65 R16 C, RM7 Summer tires, RS3 Steel wheels 6.5 J x 16, RY2 Tire pressure monitoring system on front and rear axle, wireless, S23 Passenger seat, double seat, S28 Armrest, driver's and passenger's door, S87 Driver's seat box, low, SA5 Airbag driver, SA6 Airbag passenger, SB3 Suspension seat, comfor

Condition: new, Year of construction: 2025, color: grey, Container description Our offer includes a complete package with high quality and is therefore unbeatable. We only purchase gas appliances from qualified, high-quality manufacturers. The construction and the entire kitchen with the equipment are NEW! 1. information about the container Availability: Delivery time immediately Color: Anthracite Delivery included in the price, delivery to the edge of the shelf. 2. structure made of isothermal aluminum fiberglass laminate with excellent aesthetic appearance. Guarantees optimum interior temperature in all seasons. Dimensions Total length: 3000 mm Total width: 2000 mm Overall height: 2300 mm 3. gastronomic equipment; kitchen made of stainless steel and wood Gas appliances Nljdpjztar Rofx Aqwef Gas grill "Bertos" , smooth plate, dimensions (W x D x H) 600 x 600 x 290, power: 8 kW, made of stainless steel, G6FL6B Gas deep fryer "Bertos" , 2 x 8 liter bowl capacity, dimensions (W x D x H) 600 x 600x 290, power: 13.2 kW, made of stainless steel, with drain tap, GL8+8B Gas cabinet for 2 x 11 liter propane gas cylinders Cooling options Small under-counter refrigerator "Liebherr" Refrigerator with glass front, also suitable for drinks Water system Water system with water canisters, 30 liter capacity with fresh and waste water canisters Two stainless steel washbasins with fittings Hygiene package with folded towel dispenser and soap dispenser 10-liter hot water boiler Pump Lighting LED lighting on the ceiling LED lighting with color play around the sales hatch with remote control Emergency light Further equipment Brushed stainless steel serving surface and work surfaces Insulating wall at the hob (fireproof) Extractor hood with labyrinth filters Non-slip floor for gastronomy Optional spit protection Access through a side door Warranty 1 year warranty on body and kitchen This price applies to the standard equipment shown. Changes or additions will incur additional costs. Of course, we can also build this model differently! Delivery time is 6 months. Do you need a shorter or longer version of this model? Do you need different equipment for this sales trolley? Does your equipment require a higher payload or more sales flaps? You can determine many vehicle details yourself!

Condition: good (used), Year of construction: 2007, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 141-8300, cutting length (max.): 7,000 mm, saw blade width: 100 mm, year of last overhaul: 2022, Zenz BN 110 S saw with mechanization 22 kW drive motor 7 m cutting length 5 vertical supports 2 tensioners (+ 2 supports) Log lifter 4 leveling devices with claws 1 log roller 1 pre-cutter 20 l water lubrication drum PLC control Seat mounted on armrests PLC on the left - joystick on the right Mechanization, built in 2022, consisting of: Hydraulic flap frame for removal from the saw Nljdpfewhcwhsx Aqwsf with electrically driven roller conveyor Roller conveyor with hydraulic ejectors 4 m roller conveyor All electrical and hydraulic elements can be operated from the operator's station. Zenz automatic sharpening machine, type AHB No. S-1012

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen Nljdpfx Aqsxuad Aewef - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right Optional availabe: (not included in pricing) Kolbus card Gluer - KK 841 - 2011 Kolbus cold glue spine glue unit - 2011 Description updated: 9-4-2026

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 221055-1, type of input current: AC, input voltage: 400 V, type of cooling: water, total width: 2,430 mm, total length: 12,080 mm, total height: 2,880 mm, fuel: diesel, overall weight: 18,000 kg, continuous power (apparent): 770 kVA, continuous power: 616 kW (837.53 HP), rotational speed (max.): 1,500 rpm, cubic capacity: 16,400 cm³, fuel tank capacity: 9,000 l, tank capacity: 9,000 l, power: 616 kW (837.53 HP), nominal power (apparent): 770 kVA, Equipment: documentation/manual, rotational speed infinitely variable, EPS-C40 770S - 72h Container Emergency Power Supply Unit: AVAILABLE IMMEDIATELY!!!! GT770S 770 700 Scania DC16 078A 02 43 400/230V 50Hz-LS Rated power PRP: 700.0 kVA, 560.0 kW cos Phi = 0.8 Rated power LTP: 770.0 kVA, 616.0 kW cos Phi = 0.8 Reference conditions according to DIN ISO 8528 Speed: 1500 rpm Design: Stationary Engine: Scania DC16 078A 02 43, four-stroke diesel engine, liquid-cooled, crankcase ventilation Nsdpfx Aqsvyp H Uswolf returned to the engine block, fuel system with pre-filter, filter, and water separator, combustion air filter with vacuum indicator, fuel hoses for connection of supply and return lines with flexible transition. Electric starter, engine shut-off device, and electronically governed speed regulator. Rated power: 596.0 kW Rated speed: 1500 rpm Cylinders: 8-cylinder V Displacement: 16,400 cm³ Leroy Somer LSA 49.3 M6 4-pole three-phase synchronous generator Continuous output: 730.0 kVA at 40°C Rated voltage: 400V Rated frequency: 50Hz Manual engine oil change pump from 700 kVA Manual pump for emptying the engine oil pan. Electric engine preheater 1000W up to 700 kVA 1.00 unit The preheated coolant circulates in the primary cooling circuit of the engine via convection. Connected with flexible coolant hoses to the engine’s internal cooling circuit, equipped with shut-off valves for maintenance accessibility. Coolant recirculation pump ensures safe preheating of the engine. Walls and ceiling made from pressed steel plate. Derusting and cleaning accomplished by sandblasting the welded structure. The container is coated inside and out with marine-grade primers and paints for seawater resistance. Container 40" HC High Cube Soundproofed Container ISO 1496-1 for power generation units, external dimensions according to ISO 668. Wall and roof panels are insulated with self-extinguishing, oil- and water-resistant sound insulation material, enclosed with glass fibre matting and electro-galvanized coated perforated sheet metal cassettes. The exhaust silencer is housed in a separate compartment within the container. Radiant heat is safely discharged vertically with the cooling airflow from the front-mounted radiator. Air intake openings are installed in the wall surfaces; air exhaust outlet in the roof. The exhaust outlet of the silencer is protected by an exhaust flap against the ingress of water. One front side is equipped with double-leaf doors with circumferential sealing and serves as an inspection opening. Side personnel doors, with emergency release and circumferential sealing, provide access for maintenance work. The silencer and exhaust compartment is also fitted with an access door. Plant operation is performed externally. The control system and indicators can be viewed through an inspection window even when the door of the control panel is closed. The emergency stop button is protected from damage and mounted in a recessed housing niche. Cable entry can be made from the side or through the container floor. The floor entry is prepared for annular space seals DN 150. 40" Container collection tray according to WHG Oil-tight welded checker plate floor with surrounding upstand, min. 50 mm And much more… Special feature: MAINS PARALLEL operation possible!!!

Condition: used, Used Morton-Lödige model FKM600D 321 stainless steel contact parts ploughshare mixer. Nledpfx Aqjykn T Eowof Material: 321 Stainless steel Capacity: 600 litre total capacity. 200-420 litre working capacity (Product Dependent) Container Dimensions: 790mm diameter x 1240mm long Discharge Type: 300mm x 240mm centre bottom outlet with pneumatically operated valve. Type Of Blades: 321 stainless steel ploughshare blades Motor: 37kw, 1500rpm, 3/50 motor with Flender gearbox giving reduction ratio of 14:1. Unit includes: provision for 2 choppers. - x2 400mm x 450mm side access doors. - Mounted on a mild steel frame A video of this mixer is available below. Specifications: Bowl Volume: 158.5 gal Motor Power: 37 hp Material Of Construction: 321 Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 2 Revolutions Per Minute: 1500 Dimensions: 790mm diameter x 1240mm long

Year of construction: 2005, operating hours: 4,205 h, condition: used, 2005 | Westeria WindSifter on tracks | Used Screen | 4205 hours 📍Location: Belgium 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 43000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 71 inspection points 55 approved ✅ 15 imperfect ℹ️ 1 issues ⚠️ Nedpoyaikkofx Aqwolf 📌 Inspector's Comment: Good, machine was in working condition at the time of inspection. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "35089 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Nledjztpxmepfx Aqwjf

Condition: used, maximum load weight: 13,260 kg, overall weight: 16,000 kg, first registration: 01/2002, loading space length: 7,320 mm, loading space width: 2,470 mm, loading space height: 2,475 mm, loading space volume: 44 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2002, Chassis No. G0124487_1 – Manufacturer: Krone. Nsdpfx Ajztukneqwelf * Simple corner brackets * Roll-up door (aluminum) * Forklift accessible * Fixed support legs * Device for rail loading * Lashing points Storage container: Weatherproof, secure closure, floor in good condition, no further repairs required. Delivery time: IMMEDIATELY AVAILABLE. Technically ready for use, no further repairs needed. Substructure with signs of use, some surface rust. Isolated paint chipping on components of the swap body. Isolated surface rust on components of the swap body. Dimensions are approximate. Offer subject to change; interim sale reserved. Prices are net, ex works D-59302 Oelde. Further details upon request, please contact us by phone or email.

Condition: ready for operation (used), Year of construction: 2004, total height: 2,600 mm, total width: 6,800 mm, product length (max.): 40,000 mm, Double sided edgebander manufactured in 2004. This HOMAG KBZ KFR20 / KFR526 complete production line features a turning station and a Bargstedt stacker. It is designed for formatting, milling, seaming, grooving, and edging panels in a single work process, specifically for storage and partition wall elements. If you are looking to get high-quality edging capabilities, consider the HOMAG KBZ KFR20 / KFR526 machine we have for sale. Contact us for further details. - Machine Type: Complete production line with turning station and Bargstedt stacker- Components:* M.01: OPTIMAT TBR100/30/12 (HOMAG)* M.02: PROF. KFR20/16/A3/15 (HOMAG)* M.03: OPTIMAT TDR310/30/12 (HOMAG)* M.04: OPTIMAT KFR526/10/A3/35 (HOMAG)* M.05: TFR560/S/R/24/21/3 (BARGSTEDT)* M.06: PROF. TSP410/ER/35/12/S (BARGSTEDT)- Length: 40m- Width: 6.8m- Height: 2.6m (with hoods/flaps open)- Function: Panels are formatted, milled, seamed, grooved, and edged in a single work process; specially configured for the production of storage and partition wall elements- Workpiece Length: min. 250 mm - max. 3,200 mm- Workpiece Width: min. 250 mm - max. 1,350 mm- Workpiece Thickness: min. 15 mm - max. 57 mm Nedpfx Aozuhc Tsqwslf

Year of construction: 2008, condition: used, 2008 | Powerscreen Horizon 6203 | Used Screen 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 42900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 71 inspection points 51 approved ✅ 16 imperfect ℹ️ 4 issues ⚠️ Nlodszuaxyepfx Aqwsf 📌 Inspector's Comment: Several bodywork tasks are required, as well as labor time and some small hydraulic motors. Perhaps replace the entire sieve with a standard exchange, but after the work, it remains overall a functional machine and a rare model. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40954 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.