Used 5X for sale (1,188)

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: KHT, Steel / Stocker indoor crane, gantry crane, bridge crane, including steel structure + floor control Steel structure dimensions approx. length 15m x 9.5m width with 1 bridge crane 12500kg, lifting height 6m Payload/lifting capacity 12.5t System technical data: Crane runway/steel structure consisting of HEA/HEB180 girders, HEB240 guide rails Length of outer edge of steel structure approx. 15m Total width of outer edge (steel structure) approx. 9.53m Total crane height approx. 4.52m Top of guide rails approx. 3.99m Bottom of guide rails approx. 3.87m Top of bridge approx. 4.52m Bottom of bridge approx. 4.13m Dkedpfx Aaewgwrqo Hjt Hook height approx. 3.4m Track gauge approx. 6.23m Support spacing: left (2.65 + 4.44 + 4 + 3.5 m), right (4.6 + 4.9 + 4.9 m) System is delivered complete: Steel structure complete with conductor rail 1x bridge including travel drives 1x 12500 kg steel wire rope hoist SH 5032-25 4/1 1Am M4 lifting speed 1/6.3 m/min Crane is disassembled and immediately available The item is located in 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or pickup by appointment only

Condition: excellent (used), Year of construction: 1988, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 370 mm, roller (top) diameter: 370 mm, side roll diameter: 280 mm, sheet thickness (max.): 20 mm, overall weight: 13,500 kg, total length: 6,900 mm, total width: 2,100 mm, total height: 2,100 mm, New ( 2026) Digital read out position side rolls Hydraulic drop end Minimum bending diameter 420 mm Full hydraulic machine Roll quality C60 900N/mm2 Rolling width: 3100mm Rolling thickness 3x toproll Ø:15mm Rolling thickness 5x toproll Ø:20mm Rolling thickness prebending: 12mm Top Roll Ø: 370mm Bottom Roll Ø: 370mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0 - 4 Adjustiment lower roll: 0 - 700mm/min. Adjustment side rolls: 0 - 200mm/min. Number of driven rolls: 2 Power: 15kW Length: 6900mm Width: 2100mm Height: 2100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Dsdpfx Aaezxxgwo Hekt

Condition: used, mileage: 370,000 km, power: 375 kW (509.86 HP), first registration: 04/2014, fuel type: diesel, overall weight: 26,000 kg, emission class: euro5, loading space length: 6,400 mm, loading space width: 2,400 mm, loading space height: 1,200 mm, Equipment: ABS, air conditioning, all wheel drive, crane, parking heater, Volvo FH 500 Registration date: km 6x4 Third axle, driven lift axle I-Shift transmission EEV (Enhanced Environmentally friendly Vehicle) Large AP axles Flatbed, 640cm x 240cm, side boards 120cm Crane: Atlas 240-A5 Year of manufacture: 2014 3700 operating hours 5x hydraulic extensions 5+6 control circuits - grab control Remote control Hook height approx. 18m Registered in Austria ---- Visit our website: German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/…? …? Roman We will gladly assist you with financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 € Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station Dkjdpfszyxp Ijx Aa Hjt

Condition: used, mileage: 80,272 km, power: 260 kW (353.50 HP), first registration: 07/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, color: yellow, gearing type: automatic, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, Mercedes-Benz 1835 Arocs 5 + MEILLER 3Skipper Fassi F125A 4x Hydraulic Extension 4x2 Suspension: Leaf / Leaf Wheelbase: 3.90 m Payload: 7,345 kg Meiller 3Skipper Type: D9 Fassi Crane mounted behind cab Type: F125A.2.24 5x hydraulic extensions 2x hydraulic stabilizer legs Special equipment: High engine tunnel storage, Front axle load 8.0 t, Driver’s airbag, Audio system: digital radio DAB / DAB+, Access with rooftop handrail, Passenger side mirror with maneuvering position, Battery 220 Ah, Interactive multimedia cockpit, Air horn, Driver assistance system: autonomous emergency brake assist (Active Brake Assist 5), Driver assistance system: lane keeping assist, Driver assistance system: traffic sign recognition, Cab: reinforced rear suspension, Cab: steel sprung, comfort, Suspension: rear springs 13.0 t, Suspension: front springs 8.0 t, 3-leaf, Remote query function Remote Online, Parking brake additionally on front axle, Vehicle without protective plate under front bumper, Speed limiter, Rear axle crown wheel 300, Hydraulic pump (Meiller pump - 7 pistons - 270 / 63), Interior filter for construction vehicles, Rear mudguard half-shells, Fuel filter heated, Fuel tank: 290 l aluminum, left, Reinforced engine brake, Navigation system, PTO MB 123-10c, Programmable special module, Wheelbase option 3900 mm, Chassis overhang 1200 mm, Smoker package, Rain sensor, Acoustic reverse warning (external warning signal), Rear window, Seat cover / upholstery: passenger seat velour, Seat cover / upholstery: driver seat velour, Seats in cab: driver's comfort air suspension seat, External sun visor, Sun protection blind side window, driver’s door, Steel wheels 11.75x22.5 (front axle), Extra 24V socket in passenger footwell, Front underride protection, Preparation for work lights, rear of cab top Additional equipment: Emission standard EURO 6, ABS switchable, Axle configuration: 4x2, Starting/front mirror heated, Trailer brake 2-line system, Connections left, Trailer socket 24V / 15-pin, AP axle (outboard planetary drive rear axle), Arocs 5, Exhaust tailpipe to vehicle center, Batteries arranged side by side, Compressed air connection in cab, Steel air tank, Air system with condensate monitoring, Medium air system, Automatic driving light activation (light sensor), Cab: movable cab entry, Cab: hydraulic tilting device, Cab: M ClassicSpace, 2.30 m, 320 mm tunnel, Suspension: leaf / leaf, Electric window lifters, Tinted windscreen, Alternator 100 A, Transmission 8-speed - Type: G 140-8, AdBlue tank: 60 l, Manual roof hatch (steel), Central locking system, Multifunction steering wheel, Steering oil cooling, Front air intake, 1-cylinder air compressor, Heated air dryer, Engine 7.7 l - 260 kW R6 diesel (OM 936), Engine variant OM 936, Ramp mirror, Residual heat utilization, Disc brakes with full protection, Disc brakes front and rear axle, LED side marking lights flashing, Seats in cab: passenger functional seat, Rear axle stabilizer, front axle stabilizer, 12V socket in passenger footwell, Front bumper corners in steel design, Truck Data Center 7 (fleet management system), Fixed rear underrun protection, Preparation Truck Data Center (fleet management system), Straight front axle, Gross vehicle weight 18.00 t, Dedjy Scp Eopfx Aa Hskt Transmission oil cooler We are also happy to assist you with financing/leasing solutions in cooperation with our partners. All information without guarantee. Subject to errors and prior sale.

Condition: used, maximum load weight: 32,750 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, loading space length: 13,300 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, total length: 14,040 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2026, KRONE SDR COOLLINER, 2,500 KG LIFT, 270 HIGH, 250 WIDE, BRAND NEW Djdpfxszrrfyo Aa Hskt Body: Refrigerated First registration: APK (vehicle inspection): - FRC (certificate of conformity): Dimensions (l x w x h): 1331 x 250 x 270 cm Tare weight: 9,250 kg Payload capacity: 32,750 kg GVW (Gross Vehicle Weight): 42,000 kg Refrigeration: Carrier Vector 1550, diesel and electric Lift: 2,500 kg Dhollandia tail lift with separate batteries Platform length: 200 cm (extra long) Suspension: Air suspension Lift axles: Yes, axle 1 and 3 Axle configuration: Number of axles: 3 Axle manufacturer: SAF Brake system: Wabco Tire size: 385-55-22.5 Rear axle 1: Tread depth left outer: 100%, tread depth right outer: 100% Pirelli Rear axle 2: Tread depth left outer: 100%, tread depth right outer: 100% Pirelli Rear axle 3: Tread depth left outer: 100%, tread depth right outer: 100% Pirelli Extras: Carrier Vector 1550 refrigerator, diesel and electric, temperature range from -30 to +30 degrees, flower width, 270 cm high, 2x horizontal load-securing rails, 5x rails in the roof, aluminum floor, 2x lift axle, 2,500 kg tail lift with separate batteries, long lift platform (200 cm), dynamic ramp protection, pallet box, 9-ton SAF axles with disc brakes, 15-ton gooseneck, Krone telematics BRAND NEW KRONE TRAILERS WITH 2,500 KG LIFT READY FOR IMMEDIATE DELIVERY Further information: * Tire size | First axle: 385/55 R22.5 * Tire tread depth inside left | First axle: 100% * Tire tread depth inside right | First axle: 100% * Maximum axle load | First axle: 9,000 kg * Tire size | Second axle: 385/55 R22.5 * Tire size | Third axle: 385/55 R22.5 * Tire tread depth inside left | Second axle: 100% * Tire tread depth inside left | Third axle: 100% * Tire tread depth inside right | Second axle: 100% * Tire tread depth inside right | Third axle: 100% * Maximum axle load | Second axle: 9,000 kg * Maximum axle load | Third axle: 9,000 kg * Position | First axle: Rear * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Lift axle | Third axle: Yes Further equipment: * Rear doors * Homepage * Tail lift * Lift axle * SemCollection * SemStars Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inquire in advance about the costs and procedures for your respective country. Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale and errors.

Condition: good (used), Year of construction: 2007, cycle controlled lathe Machine type: Weiler E 120 x 3.000 Control: Weiler D3 Year: 2007 Power on time: ca. 41.000 h SPECIFICATIONS Max. turning length: 3.000 mm Turningdiameter: 830 mm Max. swing over bed: 1.200 mm Bettbreite 600 mm Spindle bore: 165 mm Spindelkopf DIN55027 Gr 15 Collets: Forkardt 3KS 800mm Spindle speeds: 1 - 280 / 4 - 900 rpm Transmission ratio: 2 Torque: 8.000 Nm Amount of turrets: 1 Sauter 4-Fach Kopfrevolver für 140mm Aufnahmen Tailstock Quill diameter: 140 mm quill range: 400 mm Equipment Djdpfxjzizd Te Aa Hjkt Electronical handwheel Hydraulisches Kraftspannfutter Forkardt 3KS 800mm Chip conveyor

Condition: good (used), Year of construction: 2007, Universal machining center Machine type: DMG DMC 60 T RS 3 Control: Siemens 840 D Year: 2007 Dsdpfszi Dy Rjx Aa Hjkt new spindle: 2025 Neue B-Achslager Geometrieprotokoll vorhanden Neue Scheibe Neuer Klemmring SPECIFICATIONS 5-axis-simultaneous Travel X-Axis: 780 mm Y-Axis: 560 mm Z-Axis: 560 mm B-Axes: ° C-Axis Panning head Spindle speeds: 12.000 rpm Tool: SK 40 Toolchanger: Kettenmagazin / chain magazine Tool capacity: 180 Tool lenght: 315 mm NC rotary table Palett size: 630 x 500 mm Palett system Amount of paletts: 5 Equipment Chip conveyor cooling system Internal cooling: 40 bar Air blow Roto Clear

Condition: good (used), functionality: fully functional, Year of construction: 2000, operating hours: 476 h, load capacity: 7,000 kg, lifting height: 3,400 mm, fuel type: gas, mast type: duplex, construction height: 2,680 mm, Equipment: CE marking, cabin, pallet forks, Brand: Hyster Djdpszb A Ewsfx Aa Hekt Model: S135 Xl Lifting capacity: 7000KG Mast height (collapsed): 268 CM Lifting height: 340 CM Drive type: Gas Year of manufacture: 2000 Operating hours: 476 Duplex mast 3+4 valve system Hydraulically adjustable forks Fork length: 120 CM Fork width (together): 47 CM Fork width (apart): 138 CM

Condition: excellent (used), functionality: fully functional, center height: 125 mm, grinding length: 600 mm, grinding diameter: 249 mm, control cabinet length: 1,200 mm, control cabinet width: 40 mm, grinding spindle speed: 1,530 rpm, control cabinet height: 1,500 mm, overall weight: 3,250 kg, For sale is a cylindrical grinding machine manufactured by Kellenberger. The machine is in very good condition. Make: Kellenberger Model: R 125x600 Technical Specifications: Dkodpeyyn Ehsfx Aa Hot Centre distance: 600 mm Centre height: 125 mm Workpiece diameter: 249 mm Power requirement: 10 kW Table: Travel: 700 mm Travel per handwheel turn, coarse/fine: 20/2.5 mm Speed, hydraulically adjustable: 0.02–6 m/min Minimum reversing travel: 1.5 mm Dwell time at reversal, adjustable: 0–5 sec Swivel range: 11 degrees Cross slide: Travel with feed handwheel, coarse/fine: 220 mm Travel per handwheel turn, coarse/fine: 4/0.5 mm Rapid traverse and return, hydraulic: 50 mm Feed, electro-mechanical with stepper motor: 0–9.99 mm/Ø Micro-stop of feed, per graduation: 1 µm/Ø Plunge grinding: Feed rate coarse/fine: 1–49/0.2–2.8 µm/sec Grinding spindle head: Grinding wheel, diameter x width x bore: 500 x 80 x 203.2 mm Motor rating: 5.5 kW Grinding spindle speeds: 1220, 1360, 1530 rpm Workpiece spindle head: Swivel range: 360 degrees Speeds, steplessly adjustable: 20–400 rpm Spindle internal taper: Morse 5 Motor rating: 0.9 kW Tailstock: Quill internal taper: Morse 3 Quill travel: 30 mm Machine dimensions: 2800 x 1850 mm Weight: approx. 3000 kg

Condition: new, power: 397 kW (539.77 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,000 mm, loading space width: 2,480 mm, Year of construction: 2026, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, Brand new Volvo 8x2 with an F2150RAL Fassi loading crane including fly jib and hydraulic winch Equipment as per building description Chassis: (New model 2024) • Manufacturer/Type: Volvo FH 540 8x2, wheelbase 4900 mm • For detailed vehicle equipment, please refer to the enclosed documents. • Driver’s cab GLOBE • 1 x oil pump type: Sunfub • New MOT / emissions test • Initial inspection, error reading, and parameterization of the vehicle. • If necessary, day registration with all entries. • Light bar • LED brown/brown • LED • Rotating beacons on the roof • Complete control of the warning lighting (heavy transport/tow truck type) Superstructure: • Carrying out all chassis work required for crane installation, disassembly and assembly of attachments, exhaust system, tanks, etc. Adaptation of the vehicle frame. • All chassis and bodywork are carried out in accordance with the installation guidelines of each chassis manufacturer and in the best quality. • Complete assembly of a specially designed and manufactured auxiliary frame made from fine-grained steel for crane and body. The auxiliary frame, welded and bolted to the vehicle chassis frame, guarantees extremely high torsional rigidity and perfect stability of the crane vehicle. The unique feature is the design of the auxiliary frame. Produced to the highest quality and painted in an RAL colour to be specified during order clarification. • Mounting/bolting the crane and main support carrier to the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: Front • Platform configuration as steel/welded construction, REMOVABLE platform, • Length approx. 4000 mm x width x 2480 mm. • Platform body steel / sandblasted / repainted, • RAL colour to be specified during order clarification. • Detachable aluminium side panels Brand Suer, 400 mm high, anodized version • Standard platform floor with welded steel checker plate, 4 mm, painted. • 8 x retractable lashing eyes per side 2000 daN, flexible profile/arrangement. • 2 x MULTISAFE stake pocket rows per approx 600 mm (per side) • 2 x retractable lashing eyes per side 6500 daN • Sturdy front wall made from welded frame, welded-on 4 mm steel plate and 5x accessory hooks, front wall height 1300 mm, steel finish/repainted. • Trim panels, mudguards, version aluminium checker plate, sandblasted, powder-coated and painted. RAL colour to be specified during order clarification. • 3 pcs. toolboxes, version aluminium checker plate, sandblasted, powder-coated and painted. Size and arrangement depend on wheelbase or available space. Mounting of underride protection at the rear and additional support, with installation of all hydraulic and electrical connections. Arrangement of sockets/pneumatics • 2x container locks in front of the front wall • Company FASSI is a renowned Italian crane manufacturer that has been developing, manufacturing and marketing loading cranes from 1.0 TM to 215 TM worldwide for more than 50 years. • New crane type FASSI F2150RAL 2.28RAL, endlessly rotating, fully assembled, installed, and parameterized, with 8 hydraulic extensions on the knuckle boom and Fly-JIB L816L with 6 extensions. • For detailed crane equipment, please refer to the enclosed documents. • Initial inspection and parameterization of the crane are carried out according to the technical regulations and load diagrams of FASSI loading cranes. Lighting: • 1 x LED AS, each 1x on Dkodpfey U Auyox Aa Hjt

Condition: refurbished (used), Two Diosna SP 200A mixers are available, complete with 5 mixing bowls and a dough tipper. - 2x Diosna SP200 spiral mixer Dkjdpfxoztz Ito Aa Hjt - 5x 200kg capacity mixing bowl - HK 244 dough tipper Each machine can be sold separately.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 10,631 h, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 410, total height: 2,700 mm, table load: 500 kg, overall weight: 4,200 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 13,000 W, tool weight: 7,000 g, number of axes: 3, This 3-axis Bridgeport VMC 1000 22 was manufactured in 2001. It features a working area X travel of 1020 mm, Y travel of 610 mm, and Z travel of 610 mm. The machine includes a robust table size of 1150 x 580 mm with a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 22 vertical machining centre we have for sale. Contact us for further details. Dedpfxey D N Aio Aa Hokt • Table: 1150 x 580 mm; T-slots 5x; T-slot size 18 mm • Spindle torque up to 110 Nm • Tooling: holder SK 40 DIN 69871; tool changer 22 stations (optional 30); max tool Ø 75 mm; max tool length 250 mm; tool change time approx. 5.2 s • Axis speeds: rapid X/Y 40,000 mm/min; rapid Z 30,000 mm/min; feed 1–12,000 mm/min; acceleration 6 m/s² • Accuracy: positioning ±0.005 mm; repeatability ±0.002 mm • Coolant system: tank capacity 450 l; pump capacity 70 / 140 l/min • Electrical: 400 V, 3-phase, 50 Hz; full load current 30 A; fuse protection 63 A; connected load approx. 20 kVA • Pneumatics: compressed air 6 bar; consumption approx. 80 l/min • Machine size/weight: dimensions 2830 x 2360 mm; transport with Chip conveyor weight approx. 4700 kg • Spindle operating time: 10,631 h Additional equipment • Chip conveyor (included) Technical Specification Taper Size SK 40

Condition: used, mileage: 470,073 km, power: 382 kW (519.37 HP), first registration: 01/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: orange, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, loading space length: 6,300 mm, loading space width: 2,550 mm, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Scania R520 Flatbed Truck + ATLAS 390 Crane 6x2 Suspension: Air-air Wheelbase: 5.10 m ATLAS Crane Type: 390 : 2-A5 5x Hydraulic extensions 4x Hydraulic stabilisers 1x Remote control Flatbed Length: 6.30 m Width: 2.55 m Height from ground: 1.16 m Features: - Digital tachograph - 1x bed - Cooler box - Seat heating Dkjdpfxsy I Exno Aa Hot - Electric windows - Sunroof - Sun visor - Trailer hitch (2x air-ABS-power connections) We are happy to support you with financing/leasing through our partners. All information without guarantee. Subject to errors and prior sale.

Condition: excellent (used), mileage: 142,744 km, first registration: 06/2019, fuel type: diesel, axle configuration: 8x2, wheelbase: 5,600 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Power brake booster - Roof spoiler - Low noise - Speed limiter - Refrigerator - Air suspension - Air horn - Particulate filter - Reversing camera - Sleeper cab - Sun visor - Stability control - Toolbox - PTO (power take-off) - Towing jaw = Further Information = Technical Details Number of cylinders: 6 Engine capacity: 12,742 cc Unladen weight: 18,043 kg Transmission Gearbox: OPTICRUISE, automatic Axle Configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Twin wheels Rear axle 2: Lift axle; steering Functional Lifting capacity: 10,000 kg Lifting height: 1,750 cm Crane: HIAB X-HIPRO 362 EP-5, mounted behind the cab Body manufacturer: SAWO CABLE LIFT 326 3W 20 TON Condition Technical condition: very good Visual condition: very good Financial Information Price: On request SCANIA G500 NGS 8X2 + SAWO 3-SIDED CABLE SYSTEM + HIAB X-HIPRO 362 EP-5 CRANE EURO 6 L PACKAGE 500 HP DRIVE 8X2 WITH LIFTABLE AND STEERABLE LAST AXLE AIR SUSPENSION WHEELBASE 560 CM CG20N SLEEPER CABIN WITH AIR CONDITIONING, NAVIGATION, FRIDGE, CAMERA AUTOMATIC GEARBOX WITH ENGINE BRAKE TRAILER COUPLING WITH HYDRAULIC CONNECTIONS Dodpfx Aouxuthsa Hskt SAWO 3-SIDED CABLE SYSTEM 20 TONNES NUMEROUS TOOLBOXES HIAB X-HIPRO 362 EP-5 CRANE 5X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL 5+6 FUNCTIONS ON THE CRANE ROTATOR OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 10,000 KG MAX LIFTING CAPACITY AT 1500 CM: 1,860 KG MAX WORKING HEIGHT: 1,750 CM ONLY 711 OPERATING HOURS!!! FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPANOL WE SPEAK ENGLISH

Condition: good (used), Specifications Head: Trinocular viewing head Eyepieces: 10x Reflected Light: Brightfield and darkfield reflected light Nosepiece: 5-position brightfield/darkfield Objectives: MPlan BF/DF 5x, 10x, 20x, 50x Stage: XY stage Dkjdozwpddjpfx Aa Het Focusing: Coaxial coarse and fine adjustment Light Source: 12V 100W reflected light illuminator

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 Dkodpfx Aaeyaywhe Het £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 23 ft, color: grey, overall weight: 1,500 kg, maximum load weight: 1,500 kg, empty load weight: 1,500 kg, loading space volume: 38 m³, loading space width: 4,800 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Bürocontainer Modell ANLAGE, Office Container | Residential Container | Construction Site Container | Model ANLAGE | 480 × 600 cm | High-quality & Flexible Solution Our immediately available containers can be viewed and collected directly from our warehouse. Our office and residential containers offer an excellent solution for a wide range of applications, impressing with outstanding quality, high flexibility, and short delivery times. Technical Details Dimensions: • Width: 480 cm • Length: 600 cm • Height: 250 cm Dedsxcgx Aepfx Aa Hskt Insulation • Ceiling/Walls: 50 mm PUR (polyurethane) • Optional: 100 mm insulation (PUR, PIR or mineral wool) available • Floor: 16 mm fibre cement board + PVC covering High-quality workmanship for long-term use Features & Quality • 1x Room • 1x Exterior door • 5x Windows with roller shutters • Premium window and glazing systems from REHAU for optimal thermal insulation and durability Colours • Façade colour: RAL 9002 • Frame colour: RAL 7040 • Customisation according to customer requirements possible Stock & Delivery • Stock items: Same-day dispatch possible • Non-stock items: Production time depending on model approximately 2–4 weeks • Worldwide shipping: Reliable and professional delivery to all countries • Custom dimensions: Manufactured according to customer-specific requirements 📍 Showroom address: Im Mannenberg 9a, 53557 Bad Hönningen For further information or tailored solutions, please feel free to contact us!

Condition: used, mileage: 80,272 km, power: 260 kW (353.50 HP), first registration: 07/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2026, color: yellow, gearing type: automatic, total width: 2,550 mm, total height: 3,500 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), soot filter, Mercedes-Benz 1835 Arocs 5 + MEILLER 3Skipper Fassi F125A 4x Hydraulic Extension 4x2 Suspension: Leaf / Leaf Wheelbase: 3.90 m Payload: 7,345 kg Meiller 3Skipper Type: D9 Fassi Crane mounted behind cab Type: F125A.2.24 5x hydraulic extensions 2x hydraulic stabilizer legs Special equipment: High engine tunnel storage, Front axle load 8.0 t, Driver’s airbag, Audio system: digital radio DAB / DAB+, Access with rooftop handrail, Passenger side mirror with maneuvering position, Battery 220 Ah, Dodpey R Hf Ujfx Aa Hokt Interactive multimedia cockpit, Air horn, Driver assistance system: autonomous emergency brake assist (Active Brake Assist 5), Driver assistance system: lane keeping assist, Driver assistance system: traffic sign recognition, Cab: reinforced rear suspension, Cab: steel sprung, comfort, Suspension: rear springs 13.0 t, Suspension: front springs 8.0 t, 3-leaf, Remote query function Remote Online, Parking brake additionally on front axle, Vehicle without protective plate under front bumper, Speed limiter, Rear axle crown wheel 300, Hydraulic pump (Meiller pump - 7 pistons - 270 / 63), Interior filter for construction vehicles, Rear mudguard half-shells, Fuel filter heated, Fuel tank: 290 l aluminum, left, Reinforced engine brake, Navigation system, PTO MB 123-10c, Programmable special module, Wheelbase option 3900 mm, Chassis overhang 1200 mm, Smoker package, Rain sensor, Acoustic reverse warning (external warning signal), Rear window, Seat cover / upholstery: passenger seat velour, Seat cover / upholstery: driver seat velour, Seats in cab: driver's comfort air suspension seat, External sun visor, Sun protection blind side window, driver’s door, Steel wheels 11.75x22.5 (front axle), Extra 24V socket in passenger footwell, Front underride protection, Preparation for work lights, rear of cab top Additional equipment: Emission standard EURO 6, ABS switchable, Axle configuration: 4x2, Starting/front mirror heated, Trailer brake 2-line system, Connections left, Trailer socket 24V / 15-pin, AP axle (outboard planetary drive rear axle), Arocs 5, Exhaust tailpipe to vehicle center, Batteries arranged side by side, Compressed air connection in cab, Steel air tank, Air system with condensate monitoring, Medium air system, Automatic driving light activation (light sensor), Cab: movable cab entry, Cab: hydraulic tilting device, Cab: M ClassicSpace, 2.30 m, 320 mm tunnel, Suspension: leaf / leaf, Electric window lifters, Tinted windscreen, Alternator 100 A, Transmission 8-speed - Type: G 140-8, AdBlue tank: 60 l, Manual roof hatch (steel), Central locking system, Multifunction steering wheel, Steering oil cooling, Front air intake, 1-cylinder air compressor, Heated air dryer, Engine 7.7 l - 260 kW R6 diesel (OM 936), Engine variant OM 936, Ramp mirror, Residual heat utilization, Disc brakes with full protection, Disc brakes front and rear axle, LED side marking lights flashing, Seats in cab: passenger functional seat, Rear axle stabilizer, front axle stabilizer, 12V socket in passenger footwell, Front bumper corners in steel design, Truck Data Center 7 (fleet management system), Fixed rear underrun protection, Preparation Truck Data Center (fleet management system), Straight front axle, Gross vehicle weight 18.00 t, Transmission oil cooler We are also happy to assist you with financing/leasing solutions in cooperation with our partners. All information without guarantee. Subject to errors and prior sale.

Condition: good (used), Year of construction: 2014, operating hours: 5,898 h, lifting height: 4,950 mm, fuel type: electric, mast type: triplex, battery manufacturer: Eternity, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, Empty weight: 4.710 kg Lifting capacity: 2.500 kg Number of valves: 3 CE mark: yes Dkedpfx Ajv S E Sdoa Hot Number of owners: 1 Technical condition: good Visual appearance: good Fork carriage: Sideshifter Please contact Bas Sindorf for more information

Condition: used, Year of construction: 2014, Used Machine Year of Manufacture: 2014 Features and Technical Specifications: - X-axis working range: 3,740 mm - Y-axis working range: 1,570 mm - Z-axis travel: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional locking mechanism for the C-axis - Tool change stations: 24 with turret changer; 10 on the left side of the machine column - Vertical drilling spindles: 12 - Machine table: cantilever table - Automatic table positioning: available - 6 e-motion workpiece supports - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for alternating setup - With automatic central lubrication - With mobile control console featuring a PC monitor - With air conditioning for the control cabinet - With a 90 m³/h vacuum pump - With handheld control unit Dedpfx Aszlbp Uja Hjkt - Includes: 12 frame clamps, 8 large and 4 medium suction cups

Condition: good (used), functionality: fully functional, control type: manual, degree of automation: semi-automatic, actuation type: hydraulic, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, back gauge adjustment: motor-driven, back gauge: 1,000 mm, Equipment: angle stop, documentation/manual, emergency stop, foot remote control, The cutting tool can be used with 4 different attachments, with 2 currently in use. Manufactured in Germany. Dkjdpezmyyzjfx Aa Het

Condition: used, mileage: 445,633 km, power: 353 kW (479.95 HP), first registration: 05/2011, fuel type: diesel, empty load weight: 14,000 kg, maximum load weight: 12,000 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 4,200 mm, brakes: intarder, color: red, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 5,200 mm, loading space width: 2,420 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, cabin, central locking, crane, differential lock, trailer coupling, Vehicle location: Bovenden. Aluminum body, long cab, 1x comfort seat, 1x sleeper berth, electric mirrors, heated mirrors, power window left, power window right, air conditioning, sun visor, 16-speed manual transmission, ABS (anti-lock braking system), Intarder, differential lock, beacon, leaf suspension, trailer coupling with air, electric and hydraulic connections, lashing rails, pendulum side panels, crane mounted behind cab, emergency stop, grab control, 2-point hydraulic outrigger support, radio remote control, 5x hydraulic extensions, green environmental badge. Wheelbase: 4200 mm. Superstructure: Hiab 245-E 5 Hiduo, radio-controlled, foldable, Schwarzmüller aluminum body, folding and swinging side boards, load-relieving springs. Loading height approx. 1,550 mm. Load diagram: 2.5 m – 8,300 kg, 7.8 m – 2,460 kg, 13.8 m – 1,280 kg. Reversing camera, left side and tailgate opening pneumatic, disc brake on front axle, drum brake on rear axle, Nordic cab insulation. ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors! Dkedpfoyhw Ibsx Aa Hst

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 250 mm z-travel 400 mm tool taper ISO 40 spindle turning speed range 30-6300 / 20-4200 U/min feeds 0 - 10.000 mm/min quill stroke 90.0 mm table-size 600 x 320 mm T-slots 5 x 14 x 63 mm Control TNC 410 CA spindle ein ~ 126 Std. engine output 11.0 kW weight 1300 kg dimensions of the machine ca. 1600 x 1500 x 1900 mm Original price incl. special accessories ~ 72.000 euros Machine was very rarely used (!!) with only approx. 126 spindle hours (spindle on) Furnishing : - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-oriented path controls, with * Programming in easy-to-understand plain text dialog * HEIDENHAIN electr. Remote control with handwheel - Pivoting control panel, to the right of the machine - hydraulic tool clamping (tie bolt DIN69872-A) - Vertical milling head rotating on both sides - ISO 40 - Vertical speed range - infinitely variable .. 30-6300 rpm. - Horizontal speed range - stepless .. 20-4200 rpm. - robust, rigid angle table with 5x T-slots - Coolant device, with tub - Swarf spray protection cabin - Instruction manual for machine Special accessories included : - 1x pneumatic clamping plate, with aggregate - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 - very many tool holders - Machine swing feet * Machine video : ?v=3dqLbTme81E Djdpfexab T Asx Aa Hjkt

Condition: used, functionality: fully functional, machine/vehicle number: A11301310, Year of construction: 2013, operating hours: 31,521 h, load capacity: 45,000 kg, lifting height: 15,200 mm, fuel type: diesel, power: 256 kW (348.06 HP), empty load weight: 77,000 kg, drive type: Diesel, Full-container reachstacker Chassis number: A11301310 Transmission: ZF 5WG 261 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Rear tire type: Pneumatic Description: Dedjzv Amcjpfx Aa Hekt Bönnhof steel slab handler!!!

Condition: good (used), Year of construction: 2000, control type: NC control, controller manufacturer: Davi Smart, number of rollers: 4, roller (bottom) diameter: 340 mm, roller (top) diameter: 370 mm, side roll diameter: 320 mm, roller length: 3,100 mm, sheet thickness (max.): 25 mm, overall weight: 18,500 kg, total length: 5,900 mm, total width: 2,200 mm, total height: 2,300 mm, power: 30 kW (40.79 HP), Equipment: cone bending device, 4 roll plate bender Davi Promau - MCB-3037 MACH-ID 9751 Make: Davi Promau Dkodszi Ra Repfx Aa Het Type: MCB-3037 Control: Davi Smart Year: 2000 Conical bending attachment Extended roll end for section bending jobs Digital read out position side rolls Central lubrication CE-Declaration Rolling width: 3100mm Rolling thickness 3x toproll Ø:20mm Rolling thickness 5x toproll Ø:25mm Rolling thickness prebending: 22mm Top Roll Ø: 370mm Bottom Roll Ø: 340mm Side roll Ø: 320mm Number of rolls: 4 Rolling speed: 0-5 Adjustiment lower roll: 0-200mm/min. Adjustment side rolls: 0-200mm/min. Number of driven rolls: 2 Power: 30kW Length: 5900mm Width: 2200mm Height: 2300mm Weight: 18500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!