Used Zmm - Sliven (Bulmak - Bulgarien) L + Z Lathe, Center Lathe, Engine Lathe for sale (86,968)

Condition: used, Year of construction: 1980, turning diameter over bed 520 mm turning diameter over slide rest 260 mm turning length 1600 mm turning speeds 14 - 710 U/min centre height 260 mm spindle bore 60 mm total power requirement 11,0 KW weight of the machine ca. 2,9 t dimensions of the machine ca. 4,0 x 1,4 x 1,6 m Lead screw lathe - 4-jaw chuck 315mm - Multifix tool post size B Gbjdpfoy Aa Iyex Anrjl - Feed in top slide - Steady rest - Machine feet - Chip tray

Condition: used, Year of construction: 1992, gebraucht 1992 010190 prompt, Zwischenverkauf v 19800 € 1 320 mm 650 mm Gbodpfx Anoyycwxsrsl 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 0.2 - 4 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with various collets from 1 to 27 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German

Condition: used, Year of construction: 2015, gebraucht 2015 1686 prompt, Zwischenverkauf v England 14800 € 1 330 mm 1000 mm 167 mm 38 mm 210 mm 12 40 - 2500 1/min 16 0.03 - 1 mm/U 0.2 - 14 mm 2 - 56 TPI Gänge/" 190 mm 92 mm Gbjdpfowiqv Ijx Anrol 42 mm 3 MK 110 mm 2.2 kW 1940 mm 1000 mm 1550 mm 685 kg 3-axis digital read out Newall 4-jaw chuck Bison diameter 160mm with inside and outside jaws Quick-change tool post with 1 hold Coolant device Chuck protection Steel holder protection Lead screw cover Machine light Manual brake Operating manual in German with EC declaration of conformity

Condition: used, Year of construction: 1974, functionality: fully functional, Lead and feed screw lathe Make: Heidenreich & Harbeck Model M530K Year: 1974 Technical Data Manufacturer: Heidenreich & Harbeck Model: M530K Year of manufacture: 1974 Control: Conventional Centre distance: 2000 mm Swing over bed: 530 mm Swing over cross slide: 280 mm Spindle bore: 70 mm Spindle speed: 9 - 1800 rpm Dimensions (L x W x H): 4.05 x 1.50 x 1.40 m Machine weight: approx. 4 t Equipment - Röhm 3-jaw chuck, D 250 mm - 1 fixed steady rest - Removable gap bed over 400 mm length - 2-axis digital readout - 1 drill chuck - Coolant pump All data subject to change without notice. Gedpfx Aeyyk Raenrsbl A powered demonstration is possible at any time in our showroom.

Condition: new, Year of construction: 2026, turning diameter: 360 mm, turning length: 750 mm, quill diameter: 52 mm, Equipment: rotational speed infinitely variable, – Distance between centres 750 mm – Swing over bed 360 mm – Swing over tailstock 240 mm – Spindle bore 52 mm Gedpfsyzuwtox Anrobl – Longitudinal and cross feed – Digital readout on two axes – Coolant system – Lighting – Protective cover – Fixed chuck – Live chuck – Three-jaw chuck – Four-jaw chuck – Emergency stop – Documentation – 400 V

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, Center height: 400 mm Swing over bed: 815 mm Swing over cross slide: 480 mm Swing in gap: 1000 mm Length of gap: 300 mm Distance between centers: 3000 mm Speed range: 5.6 – 1120 rpm Number of speed steps: 24 Tool cross-section: 40 x 40 mm Spindle bore: Ø 72 mm Gbedpfxsy N Rg He Anrjl Bed width: 490 mm Tailstock sleeve taper: Morse 5 Tailstock sleeve travel: 250 mm Metric threads: 0.5 – 48 mm (35 steps) Inch threads: 48 – 7/16 TPI (42 steps) Module threads: 0.25 – 24 Module (30 steps) Diametral Pitch threads: 96 – 7/8 D.P. (42 steps) Circular Pitch threads: 1/16" – 3" C.P. (29 steps) Dimensions (LxWxH): 4860 x 1360 x 1555 mm Weight: 4600 kg Accessories and Equipment: - 2-axis digital readout (DRO) - 3-jaw chuck - Steady rest - Machine lamp - Coolant system - Rapid traverses - Chuck guard - Manual on hungarian - Original mfg cca. 1980 Condition:The lathe is completely overhauled. Available immediately.

Condition: good (used), functionality: fully functional, Type 4 Technical data : Center width approx. 400 mm Gjdpfx Anjy Hqynerobl Center height above bed 120 mm 24 speeds from 71 - 2240 rpm Drive power 0.6 / 0.8 kW Longitudinal feed, infinitely variable approx. 6 - 450 mm/min

Condition: good (used), turning diameter over bed 280 mm Gsdpfeyz Dg Rox Anrebl turning diameter over slide rest 170 mm turning length 600 mm weight of the machine ca. 400 kg spindle passage 26 mm speeds 55-2000 U/min total power requirement 1,4 kW dimensions of the machine ca. 1,5 x 0,8x 1,3 m Including EMCO SOD grinding support Including EMCO 4-jaw chuck Including machine feet Including change gears

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C—NEW in Special Light Grey Paintwork!!! Technical Data: >> Machine No. 92-027, Year of manufacture: 1992 >> Centre height: 140 mm >> Distance between centres: 500 mm >> Spindle speeds: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short Taper Spindle Nose DIN 55022-5 with bayonet lock Gsdpfx Ajyylq Usnrjbl >> Tailstock taper: MT 3 >> Feed rates: 0.012 to 0.9 mm/rev >> Thread cutting: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 12 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer’s warranty with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece 3-jaw chuck with 1 set of jaws >> 1 piece 4-jaw chuck with 1 set of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been freshly repainted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All measuring scales are new and fitted with protective covers to prevent contamination. The carriage movement is smooth and even throughout. Take the opportunity to view this machine under power on site and convince yourself of its condition.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C - NEW - Special Light Grey Paint Finish!!! Technical Data: >> Machine no. 92-029 - Year of manufacture: 1992 >> Center height: 140 mm >> Center distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer's warranty, with operating manual Functions: Switching between mm/inch, ABS/INC coordinate selection, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 three-jaw chuck, 1 set of jaws >> 1 four-jaw chuck, 2 sets of jaws >> Electronic spindle protection >> Multifix size A with 2 tool holders >> Motor brake Gbodpfx Aeyylqhenrel >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been newly painted in light grey. A very attractive machine. The 3-axis digital readout by K&C has been retrofitted. All scales are new and equipped with protective covers to shield them from dirt. The carriage runs smoothly and evenly. Take the opportunity to view this machine under power on site and see its condition for yourself.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Matador VS-2 Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C NEW in Special Light Grey Finish!!! Technical Data: >> Machine No. 92-028 Year of manufacture: 1992 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 15 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds: 0.012 to 0.9 mm/rev >> Possible threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 12 mm >> Weight approx. 700 kg >> Length 1.4 m, Height 1.2 m, Depth 0.55 m Accessories and Equipment: >> 3-axis digital readout by K&C, new, 12-month manufacturer warranty with operating manual Functions: Switchable mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, change of counting direction, >> 1 piece 3-jaw chuck, 1 set of jaws >> 1 piece 4-jaw chuck, 1 set of jaws >> Electronic spindle guard Gbedsyyb T Sspfx Anrjl >> Multifix size A with 2 tool holders >> Motor brake >> Bed stop About the machine: Offered here is a Weiler Matador VS-2 in very good condition. The machine is, of course, fully functional and has been repainted in light grey. A very nice machine. The 3-axis digital readout from K&C has been retrofitted. All measuring scales are new and equipped with cover plates to protect them from dirt. The slides move freely and smoothly. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Condition: refurbished (used), Straight Bed Machine Distance between centers: 50" Swing over bed: 15" Swing over cross-slide: 9" Spindle speeds: 25 to 2000 (16) Spindle bore: 2" clear Full length screw cutting Gbsdpfjv I Ddqox Anrjl Chuck mounting: D16 Tailstock taper: No. 4 morse 3 and 4 jaw chuck and face plate Coolant 2 axis DRO Main motor: 7.5 hp Machine in good condition Approx weight: 1.5 tons Approx dimensions: 7 'x 4' x 5' Quick change tool post and 3 holders

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Godpfx Asq N Ay Asnrsbl Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC 6-month warranty

Condition: used, Type: 25 x 120 Straight Bed Lathe Distance between centers: 72″ Swing over bed: 26″ Swing over cross-slide: 16″ Spindle speeds: 7.4 to 600 (24) Spindle bore: 4 1/8 Full length screw cutting: yes Gbodpfx Anewmlckerjl Chuck mounting: D1-11 Tailstock taper: No.5 Morse Power compound Power traverse Slide along chuck guard and we have rear splash guarding Main motor: 15kw 3 phase Weight: approx 5 tons Condition: Slideways very good Can also be repainted at extra cost Cleaned and serviced

Year of construction: 1965, condition: ready for operation (used), Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible. Gjdpfx Aoy D Tpmenrebl

Year of construction: 1965, condition: ready for operation (used), Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 560mm, swing over cross slide: 320mm, control panel: Heidenhain. An on-site inspection is possible. Gbjdpfx Aney D Tptjrel

Year of construction: 1977, condition: ready for operation (used), Chuck diameter: 400mm, turning length: 1000mm, swing over bed: 700mm, swing over cross slide: 400mm, control panel: TRAK 102. An on-site inspection is possible. Gsdpsy D Tpyjfx Anrebl

Year of construction: 1965, condition: ready for operation (used), Chuck diameter: 315mm, turning length: 1500mm, swing over bed: 500mm, swing over cross slide: 320mm, control panel: TRAK 102. An on-site inspection is possible. Gsdpfxey D Tpae Anrsbl

Year of construction: 1968, condition: ready for operation (used), Chuck diameter: 315mm, turning length: 1600mm, swing over bed: 560mm, swing over cross slide: 370mm, control panel: Heidenhain. An on-site inspection is possible. Godoy D Tn Nopfx Anrjbl

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 0529/90, turning diameter over cross slide: 400 mm, spindle bore: 50 mm, turning diameter: 1,000 mm, center height: 200 mm, turning length: 1,000 mm, overall weight: 1,800 kg, For sale: Universal lathe Prvomajska - Type: TNP 190 / 1000 - Machine No.: 0529 / 90 Gsdpfxey Rzt Ts Anrsbl - Year: 1990 - Weight: 1800 kg - Certificate: 0251 - Max. turning length: 1000 mm - Max. turning diameter: 400 mm - Spindle bore: d=50 mm ACCESSORIES: faceplate fi200, tailstock centre, drill chuck head, tool holders, tapers for large drills, sleeves for large workpieces, various belts, various drills… The machine has been regularly serviced, maintained, and is in excellent condition. It has performed various tooling operations. It is connected to the power supply and ready for immediate use.

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 0216/88, turning diameter over cross slide: 400 mm, spindle bore: 50 mm, turning diameter: 1,000 mm, center height: 200 mm, turning length: 1,000 mm, overall weight: 1,850 kg, For sale: Universal lathe Prvomajska - Type: TNP 380 1000 - Machine No.: 0216/88 - Year: 1988 - Weight: 1850 kg - Max. turning length: 1000 mm - Max. turning diameter: 400 mm - Spindle bore: d=50 mm ACCESSORIES: lathe chuck fi200, tailstock center, drill chuck, tool holders, tapers for large drills, steadies for large workpieces, various belts, various drills… Godpsy Rztyofx Anrsbl The machine has been regularly serviced, maintained, and is in excellent condition. It has been used for various tooling jobs. It is connected to the electrical network and ready to operate.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 1006, turning diameter over cross slide: 360 mm, spindle bore: 50 mm, turning diameter: 360 mm, turning diameter over bed slide: 360 mm, center height: 180 mm, turning length: 500 mm, overall weight: 1,500 kg, For sale: Universal lathe Prvomajska - Type: TNP 160B /500 - Machine No.: 1106/83 Godpfjy Rzr Asx Anrsbl - Year: 1983 - Weight: 1500 kg - Max. turning length: 500 mm - Max. turning diameter: 360 mm - Spindle bore diameter: 50 mm ACCESSORIES: lathe chuck Ø200, tailstock center, drill chuck, tool holders, Morse tapers for large drills, steady rests for large workpieces, various drills, etc. The machine has been regularly serviced and maintained, and is in excellent condition. It has performed various tooling jobs. It is connected to the electrical mains and ready for immediate use.

Condition: like new (used), Weiler Primus Godpfxsyy Ngtj Anrsbl Excellent condition! With accessories

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 80 mm, turning diameter: 560 mm, center width: 2,000 mm, New CNC cycle lathe ZDM 560 x 2000 with Siemens 828D ShopTurn 2. Machine Overview The ZDM 560 x 2000 is a robust and versatile flat-bed CNC cycle lathe designed for flexible production, maintenance, and training environments. It combines the benefits of conventional lathes with state-of-the-art CNC control technology. Thanks to the Siemens 828D ShopTurn control system, it enables simple and intuitive programming. The machine is particularly suitable for single-part and small batch production and is available for immediate delivery from stock. 3. Technical Data ZDM 560Z Swing diameter over bed (mm): 560 Swing diameter with 6-position turret (mm): 420 Max. workpiece length (mm): 2000 Max. turning length (mm): 1900 Max. turning length with 6-position turret (mm): 1735 Max. swing diameter over cross slide (mm): 330 X-axis travel (mm): 320 Z-axis travel (mm): 1970 Rapid traverse X/Z (m/min): 8/10 Spindle mount: A2-8 Spindle bore (mm): 80 Spindle nose taper: MT7 Spindle speeds (RPM) with manual chuck: 27-135 / 55-270 / 160-805 / 325-1630 Gear stages: 4-speed Tool shank (mm): 32x32 Tailstock quill diameter (mm): 75 Tailstock quill stroke (mm): 150 Tailstock quill taper: MT5 Main motor (kW): 7.5 Net weight (kg): 4100 Machine dimensions LxWxH (mm): 3000×1250x1580 Godpfx Aeqwqiaenrsbl 4. Standard Equipment • Siemens SINUMERIK 828D ShopTurn • 80 mm spindle bore • 250 mm 3-jaw chuck • Manual tailstock • Coolant and lubrication system • Full enclosure • LED work light • CE conformity 5. Stock Machine Features • Chip conveyor for 2000 mm machine • 6-position electric tool turret • Fixed steady rests (60–190 mm and 150–280 mm) • Teach-in control panel with handwheels and joystick Additional accessories available on request 6. Special Features / Benefits • Easy operation via ShopTurn • High flexibility for single-part and small batch production • Robust cast construction • Large spindle bore for bar machining • Immediately available – no delivery lead times 7. Scope of Delivery Machine including standard equipment and above-mentioned special equipment, ready for operation. 8. Delivery Time Immediately available from stock in Stockstadt.

Condition: like new (used), Year of construction: 2018, Manufacturer: Optimum Maschinen Germany GmbH Model: L34HS Serial Number (SN): 11261804002 Machine Type: Flat-bed CNC Lathe Year of Manufacture: 2018 Motor Power: 3.7 kW Power Supply: 400 V / 50 Hz Spindle Speed Range: approx. 30 – 3500 rpm Maximum Spindle Speed: 3500 rpm Maximum Turning Diameter: approx. 350 mm Turning Diameter over Cross Slide: approx. 146 mm Gbedpfxjy Ia Uqs Anrel Distance Between Centres: approx. 600 mm Travel X/Y/Z-Axis: approx. 185 / 185 / 540 mm Taper / Mount: MT 3 Weight: approx. 1200 kg