Used Welgro Silo for sale (669)

Condition: good (used), Refurbished machine Basic machine starts at 145.000 € net *Options at additional cost, see below Ibjdpfx Afo E Dqususc with a full 1 year warranty one machine is directly available Technical specifications: Throughput up to 1200 kg / h depending on the material (e.g. sawdust with a bulk weight of 150/180 kg / qbm) Briquette Ø 75 mm including 2 m press channel Main motor power 45 kW Feed screw gear motor 2 x 2.2 kw Compressor screw 2 x 5.5 kw Distribution auger 2.2 kw Hydraulic pump motor 0.37 kW Total connected load 65 KW Control panel with plain text display for operating states and utilization display for main drive and feed screws PLC control Siemens S7 / 300 with operating hours counter in the control cabinet Machine hat CE mark Automatic start / stop function of the machine Dimensions 3100x860x1800 mm lxwxh Weight 4500 kg Optional Equipment – Additional Charges Temperature Control Unit for the Pressing Tools For maintaining the required temperature to ensure optimum briquette quality. Temperature control for pump, cooling unit, fan and pressure switch. Ready-wired for connection – mandatory for operation. Including corresponding control system: €3,990 net Cut-to-Length Device For cutting the briquettes to the required length: €5,750 net Compressed air connection required. Silo for MAP Series €19,970 net Storage silo installed above the machine Capacity: approx. 6 m³ Robust steel construction with agitator discharge system and level sensor Conveyor Line / Cooling Section (Nominal length: 5 × 2 m) €750 net per 2 metres Assembly / commissioning (nominal value approx. 2-3 days on site to install one press) based on effort and upon proof against separate invoice. The following sentences apply: Service technician/mechatronics technician per assembly and hour of travel: €129.00 Overtime: 25% surcharge 50% surcharge per Saturday and night hour 100% surcharge for every Sunday and public holiday hour Release per fitter per day: country dependent Per car, van and driving kilometer: €0.98 / km Arrival and overnight stay against receipt or flat rate bill at the client's expense. . Test with the respective customer material: (up to a maximum of 750 kg) - €1,970 net flat rate --- Recognition from the raw material: - The moisture content must be between a minimum of 6 and a maximum of 18% - Maximum span 20 mm - Excessive temperature: temperate room at at least + 5 ° C. - The loading must be free of metals and mineral impurities. This and the pressing tools and / or responsible wear can be the result

Condition: good (used), functionality: fully functional, color: blue, tank capacity: 80,000 l, machine/vehicle number: AHL-80, storage tank with the capacity of 80.000 liter for liquid fertilizer Isdpfx Afsb Avh Asuobc

Year of construction: 2026, condition: excellent (used), Maize leveling blade, silo leveling blade, maize leveling blade -The shield is rounded for better material flow -Working width: 3000 mm Ibodpfx Afeb A H Adsujc -Sign height: 1250 mm -Wall thickness: 18 mm -Delivery time about 2 weeks -Weight can be made according to customer requirements -Weight: approx. 1000 kg

Condition: used, Year of construction: 2017, functionality: fully functional, KNOLL FKB 33000 Ibedpfez D Uvpox Afujc Systems for Chip Processing Processing chips offers numerous advantages: if they are dry and sorted by type, disposal costs are reduced. Depending on the material, the chips can even be sold. A chip processing system includes various components, depending on the requirements: conveying and collecting equipment, magnetic separation technology, filters, and volume-reducing briquetting presses. Containers or chip silos are also required. The components can be linked together and operated fully automatically. Application areas The chip processing system is suitable for both semi-automatic and fully automatic processing of metal chips. Automatic conveying systems or operating personnel with trolleys/containers handle the chip transport from the machining centers. The system is used in almost all manufacturing areas of the machining industry. The processing of different materials (e.g., aluminum, steel, or cast iron) can also be realized using separate systems. Features • Chip drying is a prerequisite for safe transport on public roads. • Volume reduction lowers storage and transport costs. • Recovery of chips and coolant saves the environment and reduces costs. Possible main components • Lifting/tipping device • Chip shredder • Chip centrifuge • Chip conveyor • Separation channels • Magnetic separation technology • Briquetting press • Coolant filter and collection container • Control technology and wiring • Container filling • Chip silo

Condition: like new (used), Year of construction: 2022, functionality: fully functional, volume flow: 70 m³/h, screw conveyor length: 18,500 mm, total height: 21,000 mm, ejection height: 19,600 mm, Conveyor system for dry sawdust or other bulk materials This conveying system was designed for filling silos with sawdust for a pellet production plant. It is in its original packaging and has never been installed or put into operation. It was stored in a dry and enclosed warehouse. Overall height: approximately 21 m Conveying capacity for dry sawdust: 70 m³/hour Drive power: 7.5 kW Ibsdpsz Ngtxofx Afuoc The photo shown is for illustrative purposes only.

Condition: used, functionality: fully functional, Complete stationary sawmill including: Log infeed, transverse conveyor Log lifting device with ejector Transverse conveyor and feeder to the clamping carriage Clamping carriage, hydraulically operated, with auxiliary carriage, electrically operated; the entire sawing line can be controlled from the clamping carriage. FULL SAW FRAME BRAUN CHGB 71/75 with automatic overhang adjustment and stepless feed Saw blade tensioner Jansen, hydraulically operated Electrically adjustable wedge with electric extraction rollers Roller conveyor with pusher Iodpfx Afez I Tabeusbc Spiral roller conveyor for boards to the edging line Transverse conveyor in front of the edger Undertable cutoff saw DOUBLE EDGER PAUL KMEZ with trim removal system Roller conveyor after the edger with discharge to the left/right Saw blade sharpening machine for saw frames, Vollmer Saw blade setting machine for saw frames, Riva Circular saw sharpening machine, Vollmer Sawdust and trim disposal, shaking chute, vibrating screen with 1 fraction 2 conveyor belts for feeding into the silo

Condition: good (used), Year of construction: 2002, ARCEN CONCRETE BATCHING PLANT – FOR STABILIZATION PRODUCTION. YEAR OF MANUFACTURE: 2003. CONDITION: GOOD. MIXER: 3500 l/2.5 m3 – 160 t/h. AGGREGATE STORAGE BIN, CEMENT SILO, CATERPILLAR GENERATOR. Iedsz H H R Repfx Afujbc

Condition: used, mileage: 732,000 km, power: 380 kW (516.66 HP), first registration: 10/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: black, gearing type: automatic, emission class: euro6, loading space length: 6,100 mm, loading space width: 2,300 mm, Equipment: air conditioning, crane, had accident, parking heater, * Manufacturer: Scania * Model: R490 * Axle configuration: 6x4 * Power: 490 hp * Year of manufacture: 2017 * Euro 6 * Automatic transmission (Opticruise) * Timber carrier / timber rack body * Crane: Palfinger Epsilon M12Z83 * Crane year of manufacture: 2017 * Air suspension * Wheelbase: 3950 / 1350 mm * Air conditioning * Auxiliary heater * Navigation system * Radio / USB / AUX * Aluminum tanks and toolboxes * Condition * Vehicle runs and drives perfectly Isdjzqivmopfx Afuebc * Engine and transmission without any known defects * Crane fully functional * Passenger side of the cab damaged in an accident (see pictures) * Windshield damaged and temporarily covered

Condition: good (used), Year of construction: 1987, overall weight: 42,000 kg, total width: 6,000 mm, total length: 7,800 mm, total height: 3,900 mm, sheet thickness (max.): 22 mm, Flanging and dishing machine SCHLEIFSTEIN - KBol 4022 MACH-ID 9659 Make: SCHLEIFSTEIN Type: KBol 4022 Year: 1987 Range off edge radius Manual 20 - 500 Range off edge radius Automatic 150 - 500 Hydraulic Controllable forming roll drive Hydraulic displacement drive Clamping device without hole Max. pressure manipulator 2000 Psi / 140 bar Max. pressure press 5700 Psi / 400 bar Max. speed forming roll 170 M/Min Kunkel head forming rolls: R = 350 R = 300 R = 275 R = 250 R = 200 R = 175 R = 150   Basket bottem Ibodpezfi Hhefx Afuec Knocker bottom Pressure vessel bottom Boiler bottoms Flat floor Plate base diffuser bottom Tank bottom Tank bottom Radar reflectors Engine parts Dispense air Silo hoppers Cooker hoods Container parts Hemispheres Max. workpiece: 4600Ø Maximum sheet thickness:22mm Max. dishing radius: 700mm Min. product Ø: 800 Min. plate thickness: 4mm Min. dishing radius: 35mm Power: 90kW Length: 7800mm Width: 6000mm Height: 3900mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2017, condition: refurbished (used), functionality: fully functional, Beton2Go self-service system – MA15-2 concrete mixing plant – extensively refurbished and ready for immediate use. We are selling our Beton2Go system due to the purchase of a new one. Technically in very good condition and extensively overhauled. Ideal for a quick start or expansion. Technical data: Year of manufacture: 2017 Capacity: approx. 15 m³/h 0.5 m³ per batch Cement silo with level measurement (online compatible) Operation with retarder possible Self-service with cards (EC format) Refurbishment: Mixing plant: • HMI touch screen renewed Ibsdozlpv Aepfx Afuoc • Relays partially new • Wiring new (CEE, industrial plug, network) • Emergency stop and safety switches new • Sensors + mixer flap bearings new • Closure for mixer cover new • Hardox plates: 4/8 renewed (bottom), top in good condition • Belt rollers inspected/repaired • De-rusted, partially sandblasted and painted • Mixer arms repaired, mixer shoes new • Gear oil changed, lubricated • Dust seals + various small parts new Conveyor belt: • Rollers partially new • V-belts new • Gear oil new • De-rusted and painted • Hopper seals new Cement silo: • Wiring new • Filter cleaned • Industrial plug retrofitted • Cleaned externally UVV and DGUV V3 inspection and certification performed before handover. Ready for immediate use, no backlog of investments. Scope of delivery: Mixing plant, conveyor belt, 2x IBC (water + admixture), 2x pumps, spare parts, inspection booklet Requirements: 64A power supply, optional network (VNC remote maintenance) Inspection possible. Transport can be arranged. Price net plus VAT.

Condition: used, EGLI Frozen Butter Block Cutter / Model : V1 / Condition : Good / IN STOCK EGLI Frozen Butter Block Cutter High speed Cutter Safety Door with air operated actuator The machine is used by adding in the butter blocks and the door closes automatically, the piston applies pressure to the block pushing this towards the cutting divide that rotates at high speed . The butter pieces are dropped below the machine into stainelsss steel hopper or silo . Usage: Frozen Block cutter for butter and similar products Ibjdpfsz Ht Ebox Afujc Electrics: 3~ / 400 v/50hz Air: 6 bar -8bar

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. Ibjdpfsz Iww Rex Afusc • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: used, mileage: 737,000 km, first registration: 04/2019, fuel type: diesel, fuel: diesel, Year of construction: 2019, MAN TGX 26.500 FLL 6x2 chassis (formerly a silo vehicle) • Emission standard: EURO 6C • XLX cab • Retarder / Intarder • 16-speed manual transmission • Distance control cruise control • Lane assistant • Emergency braking assistant Ibsdpfx Ajzyzwbsfujc • Hill start assist • Differential lock • Automatic climate control • Auxiliary heater • Spoiler • Refrigerator • Telephone • Multifunction steering wheel • Heated driver's seat • Large radio with navigation • CB radio • Hands-free system • Sleeper cab with 2 beds • Central locking • GVWR: 26,000 kg • Wheelbase: 4,600 mm • Vehicle dimensions: 9,550 x 2,500 x 3,900 mm (LxWxH) • Frame length: 7,100 mm (cab to end of chassis) • Tires: 315/70 R 22.5 • 3rd axle can be lifted and steered - MOT / Inspection: new! - German vehicle! - 1st owner! Subject to errors and prior sale!

Condition: excellent (used), Year of construction: 2010, Ultrafiltration plant for fermented products 3 Main items: 1) Thermization unit 2) Ultrafiltration (UF) for fermented milk 3) Cooler and Silo. The line is used to produce Quark/Skyr. The thermization and ultrafiltration unit are also suitable for producing other fermented and concentrated dairy products such as: Skyr, Mascarpone, and Double Cream cheese. Key data: - Input: 3,500 - 5,000 liters per hour of fermented skim milk, full-fat milk, or enriched products. - Concentration factor: 1.8-2.5 1) Thermization unit Complete skid-mounted thermization unit. Flow rate: 3,500 up to 5,000 liters (depending on the product). Manufacturer: Tetra Pak Temperature cycle: Input: 21-30 °C (incubation temperature) -> recuperation (permeate cooler) -> thermization at 55/60°C or pasteurization at 72/95 °C -> holding -> output to ultrafiltration at approx. 45 °C. Complete unit including: * Stainless steel frame in which everything is pre-assembled. * Closed balance tank with spray bowl. * Centrifugal product pump, stainless steel casing, flush seal, type: LKH. * Plate heat exchanger, 4 stages, new, Tetra Pak, Clip6-SR Model. * Control box with all connections for sensors and pneumatic valves. * Holding tube for 5,000 liters per hour, adjustable by connecting more or fewer tubes: 30 seconds up to 180 seconds in 9 stages. 2) Ultrafiltration unit Manufacturer: Tetra Pak Type: Tetra Alcross US P&F Serial number: T5845810096 Year: 2010 Capacity: Input up to 5,300 liters/hour Description: Concentrates yogurt or fermented milk to achieve the desired composition and texture. The UF separates the product into retentate and permeate. The retentate is the product, with proteins and fat (if included) concentrated. The advantage of this design of UF (compared to spiral-wound UF and separators) is that it is suitable for fermented products with and without fat. Also, all proteins are concentrated (even whey proteins). This results in high pressures in the system; filtration can only be achieved with a plate and frame filtration system with flat FR60pp filters and rotary piston circulation pumps. Some example products that can be made with this system: Input: skim milk 9% TS -> output approx. 16% TS (Skyr). Input: 20% TS including fat -> output: cream cheese or mascarpone. Input: pre-concentrated fermented skim milk up to 12% TS -> output up to 18% TS (Quark). The limiting factor is the permeate output. Approximate permeate per stage: Stage 1: 1100-1755 liters/hour, 13.5 m2 filters. Stage 2: 675/1170 liters/hour, 9 m2 filters. Stage 3: 320/585 liters/hour, 4.5 m2 filters. Stage 4: 300/585 liters/hour, 4.5 m2 filters, 15 bar. Filter: plate and frame type, manufacturer: Tetra Pak - DDS, model: M37 Complete unit including: * Stainless steel frame. * 2 balance tanks with spray bowl (feed and permeate return). * Feed pump Tetra LKH. * 4 circulation loops including circulation pumps. First stage with centrifugal pump, 3 stages with Waukesha 320-U2 rotary piston high-pressure pumps. Ijdpfx Afez Imdaousbc Last stage up to 15 bar pressure for highly viscous products. 3) Quark silo, cooler, and pump. Manufacturer: Schwarte-Milfor Type: Quarksilo Serial number: 3580 Year: 2011 Capacity: 5,000 liters Description: Robust conical design for very viscous products. Insulated. Hermetic, ultra-clean with sterile air. Sensors for level and temperature. On inlet: - Plate cooler Manufacturer: Tetra Model: Clip line C6 Thermal cycle: 45 -> approx. 18°C

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 180 Production capacity: 180 m3 Mixer type: Twinshaft – 4.5 m3 Aggragate bunker: 5x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 180 consist of: Ibjdpfsz D U Dasx Afuec • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Containers, storage containers, ceramic containers, stoneware containers, ceramic storage vessels, earthenware containers, acid-resistant stoneware, fermentation crocks, sauerkraut crocks, ceramic barrels, earthenware pots -Manufacturer: VEB Crinitz N/L, Ceramic containers, acid-resistant stoneware -Capacity: 100 liters -Material: KER 515 acid-resistant stoneware ceramic GDR TGL standard 7838 -Opening: Ø 205 mm -Number: 3 containers available -Price: per piece -Dimensions: 490/450/H810 mm Iodpfxoz Epb Ne Afujbc -Weight: 84 kg/unit

Year of construction: 2004, condition: ready for operation (used), A high-temperature rolling machine for glass fiber reinforced compounds is available. 1) Large roller Comerio Ercole, year of construction: 1970, working width: 1500mm, roller diameter: 600mm, roller gap: electrically adjustable, lubrication: circulating oil lubrication. 2) Small roller Meccaniche Moderne, year of construction: 1966, working width: 800mm, roller diameter: 400mm, lubrication: circulating oil lubrication. 3) Horizontal mixer, volume: 2.5m³. 4) Big bag frame with crane. 5) 2x gravimetric dosing scales with control. 6) Conveyor belts and spiral balancing conveyor. 7) Condux HM 45/60 LA hammer mill (lined) with a 1000 mm vibrating screen. 8) 2x Lauda heaters. Including cement mixer, bucket elevator, silo, bagging scales, glass feed rack and a control cabinet for overall plant control. Documentation available. On-site inspection is possible. Ijdpfx Afewk Nldeujbc

Condition: good (used), functionality: fully functional, 1 Used Small Concrete Mixing Plant For example, for precast concrete production Manufacturer: PEMAT Type: 0.5 m³ Aggregate Storage 2 bins 2 separate dosing and discharge conveyors per hopper Mixer: Ijdpjyk Ev Rofx Afujbc 0.5 m³ pan mixer Dosing: Aggregates via dosing conveyors at the hopper 250 kg cement scale 100 l spirit level Cement silos 1 x 40 ton Control: Manual operation / control panel AVAILABLE IMMEDIATELY Location: Northern Germany Offer is net ex works Subject to prior sale, errors and/or misrepresentations excepted Sold as is, without warranty or guarantee, lying down and/or standing up Reproduction, further use, publication and/or copying of this offer is strictly prohibited!

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Used Mobile Concrete Batching Plant / Concrete Filling Station Manufacturer: PROMEKON GmbH Model: QUASIMIX 1000S Availability: Immediately Location: Northern Germany Year of construction 2022 Previous production: ca. 400m3 Technical Specifications Aggregate Storage • 1 double hopper: 2 × 2.4 m³ • Incl. 2 separate dosing belts Mixer • Pan mixer: 1 m³ • Output: approx. 25 m³/h Iedpfx Afsynhkfsujbc • Incl. automatic mixer scale (calibratable) Dosing System • Aggregates via dosing belts at the hopper • Cement dosing • Water dosing via water meter Cement Silo • 1 × 27.3 m³ Control System • Fully automatic process and system control • Designed for self-service operation Terms of Sale • Offer is net ex works • Subject to prior sale • Errors and/or misstatements excepted • Sold without warranty or guarantee • Condition: as seen, lying and/or standing • Any reproduction, reuse, publication, or copying of this offer is prohibited

Condition: used, functionality: fully functional, Year of construction: 1988, 1 Unit Used Concrete Batching Plant Manufacturer: Liebherr Type: Mobilmix 60 Year of Manufacture: 1988 Output: approx. 55 m³/h (compact concrete at 30 sec. mixing time) Aggregate Storage 4-compartment inline silo 2 × 30 m³ + 2 × 40 m³ Mixer Liebherr ZE 1000/1500 Equipped with moisture probe / moisture measurement system Weighing / Dosing System Aggregates via weighing conveyor: max. 2,500 kg Cement scale: 250 kg Water scale: 250 liters Cement Silos 3 × 60 tons – Manufacturer: Kurz 1 × 60 tons – Manufacturer unknown Control System Gedis Operator Station-Control container Ibodpfxsy Hia Te Afuec Additional Equipment Partial enclosure included Admixture container included Available immediately Location: Ludwigslust / Northern Germany Offer is net, ex works (EXW) from current location Subject to prior sale Errors and/or misstatements excepted Sold as seen, without warranty or guarantee - Any reproduction, reuse, publication, or copying of this offer, in whole or in part, is strictly prohibited.

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Ibedpfx Afei Rnx Ujuoc Superstructure: Compressor with oil cooling. The compressor is operated via tipping hydraulics! Oil motor Sunfab type M-034, No. 278048, silo compressor GHH type CG80 H with diesel bell, machine No. 383266 WO2225NJ630F4DG, silo oil 405 spec. compressor oil K-10 ltr., pressure silencer W1-12 s2.0 inch Storz C2.0 inch internal thread, intake air filter W12/13 M lid R F-Part. AL17 safety valve R 1 1/2 inch 2.6 bar, measured compressor speed on Szm motor 1050 rpm, split drive large = compressor 3450 rpm. Dismantling of a Feldbinder silo. The compressor was overhauled in 2006 for approximately €9,000; invoice is available. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: repair required (used), functionality: not functional, operating hours: 12,015 h, power: 11 kW (14.96 HP), input voltage: 11 V, intake manifold diameter: 500 mm, filter area: 213 m², total height: 7,500 mm, total length: 3,000 mm, total width: 3,000 mm, 213 m² filter area (standard filter hoses), vibrating motor, fire protection damper in the return air duct, motorized adjustment of the return air (inside/outside), fire hose, approximately 27 m³ intermediate silo, articulated arm discharge to the press. Briquetting press: motor 11 kW, 12,015 operating hours. The hydraulic pump was replaced and the hydraulic block was overhauled at approximately 10,000 hours; the hydraulic cylinders are leak-proof. The press operates in automatic mode with a level sensor; a second sensor is activated when the silo is overfilled. The briquettes have a diameter of 70 mm, and the density can be adjusted. The system requires repairs: the chrome plating on the clamping chuck is worn off. Since the system has not been in operation for 12 years, the electrical system needs to be overhauled, and the mechanical components need to be serviced. I would assist with the dismantling; a forklift is available. Isdpfx Ajz R Sulefujbc

Year of construction: 2005, condition: excellent (used), Vertical block mould machine: Kurtz mod. Ecomat Basic data: • Year of production: 2005 • Block dimensions (LxWxH): 1060x1320x5200 mm The set includes inlays (height reducers) for blocks: - 1060x1320x5130 mm - 1060x1320x4000 mm • Electrical power demand: 400V; 50Hz • Operation silo • Roll out conveyor • Block scale • Inkjet printer • Complete documentation We also have for sale other machines for EPS (expanded polystyrene) production, such as: •steam generator •steam accumulators with capacity •3x cutting lines •3x blockmolds •pre-expander Iodpfx Afexq N Ameuobc It is also possible to purchase a complete production line (including installation, commissioning, and staff training).

Condition: new, functionality: fully functional, power: 55.16 kW (75.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 5,500 kg, lifting height: 5,499 mm, tire size: 16x70-20, number of seats: 1, shovel volume: 1 m³, Year of construction: 2026, Equipment: additional headlights, adjustable boom, all wheel drive, hydraulics, onboard computer, standard shovel, The HZM 825-T Profi is the flagship model in the HZM telehandler series, offering maximum performance, maximum reach, and maximum reliability. Powered by the robust Yunnei diesel engine with 75 hp / 55 kW and Bosch common-rail high-pressure injection, it achieves a tipping load of 4,050 kg at the attachment point and a lifting height of 4,541 mm – figures that other telehandlers in its class cannot match. The operating weight of 5,500 kg ensures maximum stability, even with the telescopic arm fully extended and carrying the maximum load. As standard, the machine is equipped with a 1.0 m³ standard bucket with a Euro attachment and a hydraulic quick-change system for tool-free attachment changes from the driver's seat. With a lifting height of 4,541 mm, the HZM 825-T Profi reaches areas that are usually reserved for cranes or forklifts: truck loading ramps, building openings on the third floor, high warehouses, and agricultural silos. The powerful torque converter transmission with powershift function ensures powerful, smooth movements even under maximum load, and the electronically controlled reversing switch on the joystick enables quick changes in direction without having to move your hand. The fully equipped cabin offers a sprung comfort seat, heating, ventilation, windshield wipers with a washer system, lockable doors, and a standard rearview camera. A complete LED lighting system with main and work headlights, as well as a rotating beacon, enables operation even in the early morning and during night shifts. Rear hydraulics and a 13-pin socket according to EU standards for trailers and electric tools are also included as standard. The machine is CE-certified according to EU Machinery Directive 2006/42/EC and complies with the EN 474 standard for earth-moving machinery. Each machine undergoes a complete quality and function test before delivery. The scope of delivery includes the COC document for straightforward road approval. For operation on public roads, a driver's license of class L (up to 25 km/h) is sufficient; no driver's license is required on private property. A 2-year manufacturer's warranty is included. Technical data: Feature Value Engine Yunnei DEF20CAF4, Diesel, Bosch Common-Rail Engine power 55.8 kW / 75 hp Max. torque 320 Nm Drive type Torque converter with powershift, 2 forward gears Maximum speed 20 km/h Fuel tank 98 l Hydraulic tank 95 l Max. hydraulic pressure 180 bar Max. hydraulic flow rate 120 l/min Operating weight 5,500 kg Tipping load at the attachment (machine level) 4,050 kg Standard bucket 1.0 m³ Lifting height (telescopic arm, lower edge of bucket) 4,541 mm Turning radius inside / outside 1,892 mm / 4,043 mm Equipment / Highlights: Full cab with heating, ventilation, rearview camera; sprung comfort seat; adjustable steering wheel; LED main and work headlights; rotating beacon; windshield wiper/washer system; electronic Profi joystick for driving, telescopic function, and hydraulic circuit; Euro quick-change system with pressure relief; 3rd/4th hydraulic circuit with continuous pressure function; rear hydraulics with 13-pin socket; Powershift function (automatic neutral position when braking); floating position; hydraulic auxiliary oil cooler; lockable doors. Scope of delivery: HZM 825-T Profi including Euro attachment & 1.0 m³ standard bucket, German operating manual, COC documentation, 2-year mobile warranty with free choice of workshop, invoice with VAT shown. Ibedpfxoz Sr Tvo Afuoc Financing/Leasing: Available upon r

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. TECHNICAL SPECIFICATIONS: Model: COMPACT 60 Production capacity: 60 m3 Mixer type: Twinshaft mixer 1 m3 Cement weighing: 600 kg Additives weighing: 30 kg Water weighing: 250 kg Cement silo is optional. COMPACT-60 consists of: • Aggregate Storage Bunker • Aggregate Weighing Hopper • Aggregate Weighing Conveyor Ibodpsz Sqt Uefx Afuec • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet with Air Conditioner • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!