Used Vetter Krantechnik P 400 for sale (53,194)

Condition: used, condition Defekt/Ersatzteilträger manufacture Mikron type HSM 400 U The machine is defective and is being sold for spare parts. Hsdpfx Asyzt A Usagsnl Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: ready for operation (used), Two heat-resistant flat belt conveyors Integra are available. 1) Center distance: 15200mm, belt length: 15800mm, belt width: 1180mm, overall height: 600mm, belt width: 800mm, max. operating temperature: 130°C, conveying capacity: 30t/h, motor power: 3kW. Including spare edge protection rubber and motor bracket. 2) Center distance: 7500mm, belt length: 8100mm, belt width: 1080mm, overall height: 600mm, belt width: 800mm, max. operating temperature: 130°C, conveying capacity: 30t/h, motor power: 3kW. Including 6× Kito chain hoists. Documentation available. An on-site inspection is possible. Hjdpfx Aasy Hvq Ejgsnl

Condition: ready for operation (used), Year of construction: 2010, A horizontal flow-wrapping packaging machine Hugo Beck is available. Cycle rate: 5000/h, max. product width: 480mm, max. product height: 150mm, min. product length: 40mm, working height range: 820mm-900mm, max. roll diameter: 400mm, max. roll width: 600mm, roll materials: PO/PE/PP, machine width: approx. 1700mm, weight: approx. 2100kg. Including film folding device FF700-IN, print mark control, seal welding, overlap longitudinal sealing 10mm-30mm, pressure belt and pressure roller. Documentation available. An on-site inspection is possible. Hjdpfx Ajy Hvrvoagonl

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 10492297, Description Type: PLT-400 Serial number: 10492297 Article number: 3190J Year of manufacture: 2022 Belt width: 400 mm Belt speed: 0.36–24 m/min Product thickness: 3–51 mm Hjdpfx Asyvtb Toagsnl Compressed air: 0.7 l/min Power: 3 x 400V, 50Hz, 3kW Dimensions: 3300 x 1100 x 1500 mm Weight: 650 kg With extra long outfeed conveyor of 1600 mm

Condition: excellent (used), SCM SI 400 EP panel saw Sliding table 320 cm, Motorized tilting 0–45 degrees Motorized up/down blade adjustment, Right-side rip fence motorized adjustable up to 1500 mm, Manual scoring unit adjustment, Hodpfsy Rzphjx Aagjnl 9 kW motor, 3 blade speeds, Max blade diameter 400 mm, Sliding table fence adjustable for angle Used machine, in very good condition.

Condition: good (used), functionality: fully functional, overall weight: 80 kg, chuck outer diameter: 400 mm, spindle bore: 140 mm, Four-jaw scroll chuck Very good condition, signs of use are visible, see photos Clamping jaws: 4 reversible jaws → external clamping for larger diameters Hodpfjy Apncex Aagjnl Suitable for: use on lathe; machining center; milling machine Chuck can be mounted on milling table or machining center using a mounting flange. Jaw adjustment via square wrench and scroll plate, concentric adjustment, RÖHM Type Z 400. Jaw dimensions: Width: 34 mm Length: 110 mm Slot B: xx mm Slot D: xx mm Total weight: approx. 90 kg Supplied incl. chuck key. Additional clamping jaws available on request. Flange for mounting on milling table available on request. Delivery: Shipping on transport pallet by freight forwarder available on request.

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Herrmann, Ultrasonic welding transducer, ultrasonic vibration unit -Welding transformer: Type KHS20-IP50-L -Horn/Ultrasonic Sonotrode: Type 400 see photos -Number: 3x ultrasound transducer units available -Price: per piece Hnodjxyw H Ejpfx Aagjl -Dimensions: 450/100/H70 mm -Weight: 4.8 kg/pc.

Condition: ready for operation (used), Year of construction: 2013, Circular Metal Saw manufactured in 2013. This PRESSTA EISELE Profilma 400 V features a saw blade diameter of Ø400 mm and a powerful motor with approximately 12 kW. It offers automatic material feeding and a pneumatic clamping system for efficient operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE Profilma 400 V machine we have for sale. Contact us for further details regarding this machine. • Design: Integrated material feed/loading magazine; floating feed to compensate for profile deviations • Power supply: 400 V / 50 Hz • Materials: Aluminum and non-ferrous metal profiles • Saw blade diameter: Ø400 mm • Saw blade speed: adjustable approx. 3,500–5,800 rpm Hjdpfjyyxxfjx Aagonl • Saw movement drive: Servo motor with ball screw drive • Sawing direction: Linear feed from top to bottom • Cutting principle: Crosscut • Material feed: Automatic servo feed with repeat strokes for longer cutting lengths • Material separation: Before the saw blade retracts (no recutting) • Clamping system: Pneumatic, vertical and horizontal, on both sides of the saw blade; clamping force separately adjustable; replaceable plastic/PVC pads • Control: PLC-based; operation via control panel with display • Functions: Profile database; piece counter (incl. bundle cutting); cycle time display; diagnostics and error messages; machine status indicator • Saw blade lubrication: Minimum quantity lubrication (spray mist), programmable lubrication control • Extraction connections: Ø100 mm and Ø160 mm • Pre-installation: Prepared for external chip extraction • Motor Power: up to 22 kW (multi-speed motor: 3.5 / 11.5 / 18.5 / 22 kW) Additional equipment • External chip extraction unit (to connect to Ø100/Ø160 mm ports)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting width (max.): 4,300 mm, section length (max.): 1,600 mm, TECHNICAL DETAILS Max. cutting length: 1,600 mm Hnedpfx Aaeyuya Eegjl Min. cutting width: 4,300 mm MACHINE DETAILS Number of transport packages: 8 pcs. Year of manufacture: 2016

Condition: used, mileage: 625,000 km, power: 294 kW (399.73 HP), first registration: 10/2006, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: grey, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, Volvo FM 400 6x4 Skip Loader Nencki Remote Euro 5 . For inquiries: 0426379 * Condition: Very good * Engine: 294 kW / 400 HP * Displacement: 12,780 cm³ * ABS * EBS * Differential lock on rear axle * AdBlue * Suspension: Leaf spring / Leaf spring * Air-suspended comfort driver's seat * Automatic climate control * Manual roof hatch * Electric windows (driver/passenger) * Electrically heated and adjustable mirrors * 24/12V socket * CD radio / AUX / USB * External sun visor * Beacon lights on roof * Fog lights * Maneuvering mirror, right side Body: Roll-off tipper * Manufacturer: Nencki Tyres: Hnodpfx Aaoy Euhmogol 1st axle: 315/80 R22.5, leaf-sprung / 25% 2nd axle: 315/80 R22.5, leaf-sprung / 20% 3rd axle: 315/80 R22.5, leaf-sprung / 25% ----Price €29,900 + 19% VAT For further questions, you can reach us at the following numbers: * We speak: German, English, French, Polish, and ????? Subject to errors, typographical mistakes, and prior sale.

Year of construction: 2004, condition: good (used), Composed of: • Weigher/divider/tedder. For all types of masses. Automatic greaising system. Adjustable weight 60 to 600 gr • Pesadora/divisora/heñidora. Para todo tipo de masas. Sistema automático de engrase. Peso ajustable de 60 a 600 gramos. Variador de velocidad. • 40 Kg Hopper for dough, made of stainless Steel and non-stick material Hnjdpfx Aowcfq Heagel • Flour sifter • Digital piece counting • Resting chamber with 400 baskets • Bread loaf former, tape width 600 mm.

Condition: new, neu Hnsdpfewv H Awex Aagol ca. 10 Wochen ab Auftrags Türkei 10900 € 209.28 € 1250 kg 1300 mm 450 - 550 mm 400 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control with pneumatic downholer Alternatives (prices on request): Version without pneumatic pressure arm Version with brake, without motor, with or withaout pneumatic pressure arm

Condition: excellent (used), Continuous pasta press for short and long pasta. Bought for a project and never used. Hnjdpfx Asyh Rdfoagsl

Condition: good (used), Year of construction: 2010, Press brake with max. pressing force of 400 tonnes max. working length 5100 mm max. stroke 365 mm 34 kW Hnjdpfx Aaeyh T Srsgsl Total weight 38 tonnes

Condition: new, Year of construction: 2021, Technical Specifications – kappa 400 / x-motion: Saw blade diameter: 250–400 mm Cutting height: max. 133 mm (at 90 degree) Saw blade tilting: 0 – 45 degree Speeds: 3500 / 4500 / 5500 rpm Motor power: 5.5 kW (7.5 HP) Motor voltage: 3x 400 Motor frequency: 50 Hz Sliding table length: Standard 2500 mm Cutting width: 800 mm"X-Roll" system: (maintenance-free, roller bearing guidance) Control system: x-motion CNC control, 3-axis control Control panel: 5.7” (145 mm) TFT touch colour screen Features: Maintenance-free tilting segments: "Easy-Glide" Dust extraction port: Ø 120 mm (bottom) / Ø 80 mm (top) Hjdpey Nc Dksfx Aagsnl Weight: approx. 900 kgs The machine is in new condition and never has been used at all.

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding unit with inverter welding power source Serial no. Year of manufacture 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug - separate 4-roller wire feed unit with connecting hose package meters - digital display for voltage and current - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function - 4 meter Binzel hose package with central connection - water-cooled - shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding Hnjdpowa Uwdsfx Aagsl - MIG/MAG welding Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition

Condition: good (used), Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Number: 65x available -Price: per piece -Dimensions: 540/440/H250 mm Hnsdob Uhnfepfx Aagel -Weight: 3.7 kg

Condition: used, mileage: 350,000 km, power: 210 kW (285.52 HP), first registration: 07/2010, fuel type: diesel, overall weight: 12,500 kg, emission class: euro5, Equipment: ABS, all wheel drive, Unimog U 400 First registration: km !!!! 6 cylinders !!!!! Euro 5 4X4 all-wheel drive Tipper Hnedpfoxgz Dnjx Aagsl 2-circuit hydraulics PTO (power take-off) Front implement carrier 40mm AHK hitch Tel:

Year of construction: 2024, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS04, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Hnodpfx Aev Iqrbeagol Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS04, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. Hjdpsykug Sjfx Aagsnl 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: excellent (used), Saw blade diameter: 360 mm Cutting range at 90° round: 110 mm Cutting range at 90° rectangular: 110 x 400 mm Cutting range in miter at 45° round: 110 mm Cutting range in miter at 45° rectangular: 110 x 280 mm Cutting speed: 16 - 50 m/min Drive motor: 380 V, approx. 1.5/2 kW Space required: 2600 x 1150 x 1600 mm Hedpsv D Hzkofx Aagonl Weight: approx. 1000 kg

Condition: used, mileage: 142,843 km, power: 294 kW (399.73 HP), first registration: 10/2017, tire size: 315/80R22,5, axle configuration: 8x4, wheelbase: 1,880 mm, color: white, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2017, Equipment: air conditioning, electric window regulation, General information Applicable material: Concrete Drivetrain Drive: Wheel Make of engine: Iveco Axle configuration Tyre size: 315/80R22,5 Suspension: leaf suspension Axle 2: Steering Axle 3: Double wheels Axle 4: Double wheels Hsdpfjucz Htsx Aagenl Weights Empty weight: 15.628 kg Carrying capacity: 16.372 kg GVW: 32.000 kg = Additional options and accessories = - PTO

Condition: used, mileage: 131,909 km, power: 294 kW (399.73 HP), first registration: 10/2017, tire size: 315/80R22,5, axle configuration: 8x4, wheelbase: 1,880 mm, color: white, gearing type: automatic, emission class: euro6, suspension: steel, Year of construction: 2017, Equipment: air conditioning, electric window regulation, Applicable material: Concrete Tyre size: 315/80R22,5 Suspension: leaf suspension Axle 2: Steering Axle 3: Double wheels Axle 4: Double wheels Drive: Wheel GVW: 32.000 kg = Additional options and accessories = Hnodpfx Asuc D Exjagjl - PTO

Year of construction: 2025, condition: used, functionality: fully functional, HEISS Planting Machine PF 400 — Year of manufacture 2025 Hnodpfx Aajy A E R Hogjl Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 2,900 plus VAT | EXW Einbeck | Delivery upon request

Condition: used, Number of spindles 5 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. Control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- This machine is currently being refurbished at our facility! Pictures taken before dismantling and currently during the processing phase! Brief Summary: ----- 5 spindles with 8,000 rpm 4 x HSK/Powerlock Axially and radial CNC adjustments of the spindles via control CNC-controlled adjustment and positioning of the feed Table tops with guide blades at spindles 2 and 3. Includes Weinig/Neumann RF 15 return conveyor system Detailed Description: ----- Technical Data: Working width: 20-230 mm Working height: 8-120 mm 1st tool holder - bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool swing diameter: 93 - 145 mm Axially travel: 5 mm Folding device MarathonCoatin for table insert in front of 1st lower Tool Holder 2nd Tool Holder - PowerLock - Right ----- Motor with brake: 7.5 kW Shared motor with left tool holder Hjdoyy A Iqopfx Aagjnl Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 200 mm Tool swing diameter 55 mm below table level: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. tool diameter behind stop plane: 180 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle: CNC controlled axially Table tops with guide blades 3rd Tool Holder - PowerLock - Left ----- Motor with brake: Shared motor with the 2nd spindle Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter 40 mm below table level: 93 - 180 mm Table surface: 93 - 200 mm Tool swing diameter 55 mm below table surface: 93 - 180 mm Tool swing diameter for straight cutter heads max. 163 mm Max. groove depth: 35 mm Axially travel: 55 mm Spindle axially and radially CNC controlled Table tops with guide blades 4. Tool holder - PowerLock - top ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Tool swing diameter for straight cutter heads max.: 180 mm Max. groove depth: 35 mm Axially travel: 40 mm Split pressure shoe in front of upper tool holder, adjustable and pivoting away from the tool, spring-loaded. Pressure shoe in front of, and discharge after, the upper tool holder with electronic digital displays, integrated into memory functions CNC-controlled radial spindle 5. Tool holder - PowerLock - bottom ----- Motor with brake: 7.5 kW Speed ??incl. high-performance ball bearings: 8,000 rpm Tool swing diameter: 93 - 200 mm Max. throat depth: 15 mm Axially travel: 35 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller in front of the first lower tool, pneumatically controlled up/down. Durofer pointed tooth rollers (Weinig patent) with depth...