Used Vacuum Tumbler, Type T4 for sale (36,076)

Condition: used, all stainless steel Ppsdpfjy T Hlasx Ahlet belt width 600 mm mobile mesh width 5 mm adjustable speed with air knives with batter pump

Condition: used, “FED” Drum Coater Type Crumb breader for dry coatings all stainless steel belt width 400 mm adjustable speed min. 300 gr coating material adjustable angle fom 0 to 8° overall dimensions (L x W x H) : ± 4.400 x 1.450 x 1.800 mm Ppedpsy T E U Tefx Ahlet infeed belt belt width 300 mm Elevating spiral screw

Year of construction: 1996, condition: used, Lyle Industries 25 x 25 Single Station Vacuum Thermoforming Machine. Serial No. PM-037196 (1996). Country of Origin: U.S.A. Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Pjdpfxjy Shc Rj Ahlopt

Year of construction: 1973, condition: used, Illig UA100d Vacuum Forming Machine, Manual Loading of Material Sheets, Forming Area 960 x 560mm. Serial No. 2167 (1973). Country of Origin: Germany Psdpfx Aey Shcqjhlspt Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Year of construction: 2022, condition: used, Manufacturer : Buhler Haas-Mondomix B.V. Model: HAKA type VA-15L Year : 2022 Type : Foam / Aerator mixer Previous application : Application : Whipped cream Production capacity : 100 kg/hr nominal Input density : 1,0 kg/l Output density: 0.6 – 0.8 kg/l   Near as new condition. Unit consisting of : – Pre-mixer PCM 400 litres Capacity: 400 litres Design: conical bottom Lid with hinged access for manual loading of ingredients Jacketed, insulated and protected tank Stirrer: cutting blade + Teflon scrapers PT100 temperature sensor – HALA type dispensing pump with frequency converter Volumetric pump with frequency converter Jacketed design Mass flow meter with regulator – HAKA VA-15L type continuous aerator Rotor / stator with 912×5 mm square lugs Effective volume 2 ltrs Mixing head stator Double-walled front and rear plate for cooling Pjdpox R A Rtsfx Ahljpt Rotor designed for cooling Temperature sensors Jacketed piping 7.5 kW direct drive motor, frequency converter controlled Air injection: manual or automatic with mass flow meter Automatic pressure control and regulation Cabinet + PLC, Siemens S7 type – HANB cold water production unit Autonomous chilled water unit (thermoregulation) for cooling the expansion head tank Water temperature between 5°C-20°C Spiral heat exchanger / Centrifugal pump / Closed water tank – CIP Easy Clean system for easy cleaning Stainless steel platform supporting all equipment

Condition: used, all stainless steel nett width 450 mm length: 1.800 mm infeed height: 1.350 mm 400V, 50 Hz, 16A Pedey Turnopfx Ahlept Grill opening: 2 mm dimensions (L x W x H) : ± 1.900 x 1.100 x 1.450 mm

Condition: new, new ! Psdpfjy Tuq Dox Ahljpt all stainless steel 2 speeds 2 mixing directions 1,8 kW – 2,5 kW safety lid Suitable for loader with “Easy Connect” Easy clean Hinged safety gard CE-approved overall dimensions (l x w x h) : 1.676 x 830 x 1.428 mm (open lid: H: 1.985 mm) The Barmix 180 litre twin shaft paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood the mixer is ideal for mixing many products that are free flowing and easy to move around. The Barmix 180 features a special paddle shaft arrangement with one slightly higher than the other to give a more effective and quality mix. The effective mixing action with high peripheral wing speed gives good protein extraction and uniformed distribution of spices, additives and liquids. Also the Barmix 180 Litre Mixer produces a gentle mixing action which reduces particulate destruction maintaining the product structure and its original quality.

Condition: used, all stainless steel twin shaft paddle mixer intermeshing mixer useful content : 2.000 L dimensions (l x w x h) : ± 4.100 x 1.500 x 2.700 mm 1 front discharge guard Pedpfxjy Tupme Ahljpt 18 kW

Condition: used, suitable for nitrogen Ppjdpfoy Tun Asx Ahlst all stainless steel belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm product height: max. ± 80 mm

Condition: used, infeed belt “Stork” all stainless steel mesh wire belt belt width 400 mm mobile dimensions: (L x W x H) : ± 1.400 x 700 x 900 mm + “Marel Townsend” GoldFryer Type TBM 400/4000 TH all stainless steel suitable for thermic oil heated with lower and upper belt frying length 4.000 mm Ppjdpfxsy Th T Eo Ahlst belt width 400 mm adjustable speed oil circulation pump electrical hoists with Teflon infeed overall dimensions (l x w x h) : ± 7.100 x 1.500 x 2.900 mm oil circulation pump electrical hoists with Teflon infeed overall dimensions (l x w x h) : ± 7.100 x 1.500 x 2.900 mm

Condition: used, all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute (Depending on the product, shape, temperature and machine settings) total power 8 kW air consumption ± 300 L / min. mobile variable speed 3x400v 50hz dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg new PLC control (Siemens) Ppjdpfx Ahoy Th S Uoljt HMI Control Touch (digital readout with possibility of storing recipes)

Condition: used, electrically heated 132 kW frying length 3.000 mm belt width 900 mm dimensions: (L x W x H): ± 5.700 x 1.700 x 2.800 mm mecanical lid oil level control oil circulation pump filter Pjdpoy Th Rksfx Ahlspt sediment removal system

Condition: used, Potato specialties oven Ppedpfx Aoy S T Avehlst suitable for thermal oil heating infeed height: ± 1.000 mm outfeed height: ± 1.000 mm suitable for fire protection with seperate infeed belt oil circulation system net belt length: ± 9.000 mm net belt width: ± 650 mm adjustable speed lifting unit dimensions (l x w x h): ± 12.720 x 1.625 x 3.455 mm steam connection heated drip tray 0.5 - max 3 bar. oil level check VEGA central air extraction with telescopic chimney Infeed belt Type TB-D 2100-6.5 Dimensions: 2,100 x 650 mm 0.37 kW/1.1A External tubes heat exchanger “Van de Walle Apparatenbouw” Type Florigo WW050 BT Year of manufacture 08/2013 500 kW Type Van de Walle D323-V012-2000 Casing: Working pressure 6 bar / 290°C / 85L Tube: Working pressure 6 bar / 220 °C / 94L Test pressure 9 bar Drum filter Type FT750-3 Drum dia. 750 mm Drum dia. 300 mm 0.37 kW Drum 1.1 A screw 0.12 kW / 0.41 A Capacity 94 m³/h Blower 0.25 kW / 0.8 A Fryer Product belt 0.75 kW / 1.9 A Fryer top belt 0.75 kW / 1.9 A Lifting device 1.1 kW / 2.6 A Drum filter / Waste screw 0.12 kW / 0.41 A Fryer main pump 15 kW / 29.3 A Fryer auxiliary pump 0.55 kW / 1.5 A Fryer drip tray pump 0.55 kW / 1.5 A

Condition: used, all stainless steel nett width 600 mm 2 motors “JVM GmbH & Co.KG”, Type JV 156-250 power: 2 x 0,95 kW Grill opening: dia. 14-22 mm Psdpsy S Rpasfx Ahlopt dimensions : ± 2.700 x 1.400 x 1.000 mm

Condition: used, suitable for thermal oil heating (= 131 kW) 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm Ppsdey S Rn Aopfx Ahlot extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Condition: excellent (used), Year of construction: 2018, Garos GBT300 Tote bin tumbler Ppsdjy H Hr Tepfx Ahljt 2018, Stainless, tote bin mixer, the complete answer for tumbling, mixing, coating and marinating, HMI touch screen controls with programmable cycles, 3Ph

Year of construction: 2020, condition: excellent (used), Kruszec MB100 Tumbler 2020, 500Kg tumbler, forward and reverse rotation, variable rotation speed, variable tilting speed, 3Ph Psdpfx Ahoy H Hraolopt

Condition: excellent (used), Year of construction: 2013, Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Ppjdpfsy Hl Hpox Ahlot Universally applicable press, veneer press for veneering, coating, form gluing, form veneering, edge gluing, etc. With some limitations, you can certainly do without a hydraulic veneer press with this press. New heat-resistant silicone membrane, extremely flexible and easy to clean. Also suitable for shaping preheated thermoplastic materials such as acrylic glass or solid surface materials. Frame inner dimensions approx. 2900 x 1410 mm, usable area approx. 2800 x 1300 mm Working height approx. 900 mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with a capacity of 40 m³/h and two vacuum tanks, each 200 liters, for comfortable operation and rapid evacuation. Electronic vacuum pressure switch, so the pump switches off when the target negative pressure is reached and does not run continuously. Movable on four swivel castors, lockable Frame can be easily folded open, secured with two latches Double frame for quick replacement of the membrane. Currently, a new silicone membrane is installed. Rapid distribution of the vacuum through a grooved base plate. CE marking Original paint, some areas have been touched up. The silicone membrane and the base plate have been renewed; the machine is ready for immediate use. Dimensions approx. 3100 x 1550 x 1020 mm (L x W x H). Weight approx. 550 kg. The machine can be demonstrated on request at our premises after arranging an appointment. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this provider."

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm Psdpfx Aezaan Tjhlopt table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: used, twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley Ppodpfx Ajy Sz Imjhlet all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid

Condition: new, new ! all stainless steel closed lid with seal 2 mixing directions (manual or automatic) tiltable CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.300 x 600 x 1.300 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Ppedpfey Sz Iaox Ahljt Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Condition: used, Year of construction: 1973, spindle diameter 140 mm x-travel 2000 mm y-travel 2000 mm z-axis 1500 mm spindle stroke - max. 800 mm spindle taper ISO 50 table surface area 1800 x 1500 mm table load 15000 kg Ppedjy Umc Uepfx Ahlot turning speed range 2,3 - 810 U/min total power requirement ca. 30 kW weight of the machine ca. 31000 kg dimensions of the machine ca. 7300 x 5600 x 4000 mm Equipment: - Faceplate with NC facing slide and NC rotary table - Heidenhain digital readout - Various tool holders - Various clamping devices

Condition: excellent (used), Year of construction: 2016, ABB 2600-12/1.85 Type B Robot Full of options DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc. Ppedsxq Ttiepfx Ahljt

Condition: new, Year of construction: 2025, All stainless steel Tumbler Mixer - quick delivery of one machine Manufactured new to order Stainless steel drum in high grade 316 stainless steel Variable speed drum from zero to 24 rpm Psdpsif Upfsfx Ahlopt Electric tipping discharge Capacity 50 Kg to 90 Kg according to product type 2 x Models

Condition: good (used), Year of construction: 2003, feed length X-axis: 3,500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,250 mm, total length: 7,200 mm, total height: 5,300 mm, table width: 1,800 mm, total width: 6,800 mm, table length: 2,200 mm, workpiece weight (max.): 12,000 kg, Table type boring mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Make: TOS VARNSDORF Type: WHN13CNC Control: HeidenHain TNC430 Year: 2003 1e owner machine ca 16.000 Spil hours Chip conveyor Under power  X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Ppodpfxey T E Ite Ahlst Speeds / ranges: 2800Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Feed rate W-Axis: 10000mm/min. Number of controlled axis:5 Length: 7200mm Width: 6800mm Height: 5300mm Weight: 36850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!