Used Unloader (Bridge-Frame) Double Station for sale (24,476)

Year of construction: 2011, condition: as good as new (ex-display), machine/vehicle number: 10.000 Ltr, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank for diesel storage with the following specifications: Nominal capacity: 10 cbm Quantity: 1 Used, but fully refurbished, meaning the container has been cleaned, reconditioned, primed, and painted. Color: Paint RAL... as per your request. Material: Steel in steel, material S235JRG2 Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate. Shape: Cylindrical, lying horizontally on 2 welded saddle supports (ground clearance approx. 100 mm). Monitoring space of the double wall with leak detection fluid. Container dimensions: Length: approx. 5,350 mm plus 600 mm for diesel pump Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Equipment/fittings: Manway 500 mm with manway cover, screws, and gasket. - Filling pipe 2“ with TW valve (filling cap) (from 20 m³ = 3“) - Suction pipe 1¼“ - Dipstick and dipstick closure – tank level indicator - Vent pipe with cap 1 ½“ - Limit value sensor with type approval - Leak detection device (optical) = LAS with leak detection fluid - Access ladder for side mounting, supplied separately. Tank approved for installation outside of earthquake/flood zones. Diesel fuel dispenser with data recording Type: HDM80eco LTE Flow rate: 75 l/min Cloud-based basic module free of charge You can see who, when, where, and how much fuel was dispensed. Fueling is done via tank key or PIN input. Dispensing area/fueling station Type: KAP system, galvanized Kedpfx Adocl Sb Rsqedr Area with ramps (mm): approx. 2,650 x 5,300 Area without ramps (mm): approx. 2,500 x 5,000 Pan height (mm): approx. 60 - Nationwide general building approval - Approved for installation outdoors and in buildings (For outdoor installation with folding cover and passing pipes) - 2 collection basins, each with a volume of 150 liters. ===== Top offer: Liquid fertilizer - AHL tank systems in sizes from 10,000 to 100,000 liters. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees at our company. We also offer affordable delivery upon request. You can inspect our systems at any time. Further tank systems for above-ground as well as underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, please call us, one of our experienced employees will be happy to advise you. Price/Shipping The price for the fuel station applies ex works Warstein, unloaded. Delivery can be offered at a low cost for an additional charge. Delivery time: upon agreement. You will receive an invoice with VAT shown. In addition, we purchase existing tank systems and can, as a certified specialist company according to the Water Resources Act (WHG), professionally empty, clean, dismantle, and remove them. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,500 mm, travel distance Y-axis: 3,000 mm, number of axes: 3, This 3-axis DENER PL 1530 plasma cutting machine was manufactured in 2019. It features a cutting width of 1,500 mm and a cutting length of 3,000 mm, equipped with a Hypertherm HPR 130 XD high-definition plasma source. The machine is in new condition, installed but never used, with 0 working hours. If you are looking to get high-quality plasma cutting capabilities, consider the DENER PL 1530 machine we have for sale. Contact us for further details. • Condition: As-new; installed ~95%, powered on only; 0 working hours • Plasma source: Hypertherm HPR 130 XD high-definition • Working area: X 1,500 mm; Y 3,000 mm • Table/cutting heights: Table 750 mm; Cutting 570 mm • Axes/drives: • X: double synchronized AC servo, rack & pinion • Y: synchronized AC servo, rack & pinion (double-sided brushless AC servos) • U: double synchronized AC servo • Motors: brushless AC servo • Rapid positioning speed: 26 m/min • Positioning accuracy: ±0.01 mm (X/Y/U) • Control and HMI: • DENER factory CNC, Windows-based • 12" TFT LCD monitor, fixed CNC panel + separate control panel Kedpfx Adezhbf Uoqodr • Celeron 733 industrial CPU, 20 GB industrial HDD • Standard keyboard and PS/2 mouse • Cutting system/features: • Automatic height sensing and following; Hypertherm arc height control • Collision protection on plasma head • Plasma ignition control; speed control unit • Sheet alignment/positioning function • Independent sectional cutting table separated from bridge/frame, with automatic fume extraction doors • Head bridge and side guides • CE conformity; colored signal lights • Electrical/data: • Power supply: 400 V ±10%, 50–60 Hz ±2% • Power: 27 kW • Working temperature: -10 °C to +30 °C • Communication/IO: • 2x RS-232, 2x USB 2.0, LAN • Encoder fault diagnosis; max encoder input frequency 500 kHz • Analog inputs for potentiometer Additional equipment • Nesting PC software (as per original offer) • Spare parts kit (1 set) • Spare parts, consumables and starter kit

Year of construction: 2022, condition: ready for operation (used), controller manufacturer: SIEMENS, table load: 3,000 kg, Automated sheet metal storage system manufactured in 2022. This TRUMPF Automated Sheet Metal Production System features a storage height of 7,900 mm and a maximum load per storage location of 3,000 kg. It includes 266 storage locations and supports sheet formats of 3,050 x 1,525 mm. If you are looking to get high-quality automated storage capabilities, consider the TRUMPF Automated Sheet Metal Production System we have for sale. Contact us for further details. • Storage system: STOPA Compact II • Type: Automated sheet metal storage system with chaotic storage management • Storage height: 7,900 mm • Sheet format: 3,050 x 1,525 mm • Maximum load per storage location: 3,000 kg • Number of storage locations: 266 • Total storage capacity: 798 t • Configuration: 8 sections/towers, up to 37 storage levels per section • Pallet format: GF 3050 x 1525 x 90 mm • Pallet types: SPO, SPMgl • Loading heights: 185 / 275 / 460 mm • Functions: Automatic material storage and retrieval; automatic material supply to connected production cells; storage interface for integrated production machines • Storage control • Server operating system: Windows Server 2022 • Central storage management and automated material flow management • Integration with TRUMPF production equipment • Connected production cells • TRUMPF TruLaser 5030 fiber (L76) • Machine type: CNC 2D fiber laser cutting machine • Working area: 3,000 x 1,500 mm • Laser source: TruDisk 6001, 6,000 W Kodpfxszu Suge Adqsdr • CNC control: Siemens SINUMERIK 840D sl • TRUMPF TruMatic 6000 fiber • Machine type: Combined CNC punching and fiber laser cutting machine • Working area: 3,050 x 1,550 mm • Laser source: TruDisk 3001, 3,000 W • Maximum punching force: 180 kN • Linear tool magazine: 25 positions • TRUMPF TruBend Center 7030 (B34) – Cell 1 • Machine type: Automatic panel bending center • Max bending length: 3,123 mm • Max thickness: structural steel 3.0 mm; stainless steel 2.2 mm; aluminum 4.0 mm • Max box height: 220 mm • TRUMPF TruBend Center 7030 (B34) – Cell 2 • Same specifications as Cell 1 • System functionality (summary) • Central automated storage and retrieval of raw sheet material • Automatic supply of material to connected laser, punch-laser, and panel bending cells • Automatic transfer between storage and production stations • Centralized, high-capacity sheet handling • Main system configuration • 1 x STOPA Compact II automated sheet storage system • 1 x TRUMPF TruLaser 5030 fiber 2D laser cutting cell • 1 x TRUMPF TruMatic 6000 fiber punching and laser cutting cell • 2 x TRUMPF TruBend Center 7030 automatic panel bending cells Additional equipment • For TRUMPF TruLaser 5030 fiber (L76) • Automatic pallet changer • LiftMaster Compact 1530 (automatic loading and unloading) • STOPA storage connection/interface • For TRUMPF TruMatic 6000 fiber • SheetMaster 3000 x 1500 mm (automatic sheet handling) • GripMaster 3000 x 1500 mm • Storage system integration/interface • For TRUMPF TruBend Center 7030 (both cells) • 2-axis part manipulator • 5-axis rear stop • Rotary manipulator • ToolMaster Bend • Automatic loading and unloading • Storage interface • System-wide • Central storage management server (Windows Server 2022)

Year of construction: 2011, condition: ready for operation (used), A horizontal dual-head corner cleaning machine Stürtz for the simultaneous machining of two 90° internal and external corners on welded plastic windows is available. Tool stations top/bottom: 8/8, min. product dimensions X/Y without mullion machining: 320mm/370mm, min. product dimensions X/Y with mullion machining: 640mm/370mm, min. frame internal dimension X/Y: 180mm/180mm, max. frame dimensions X/Y: 4000mm/3000mm, installation depth range: 30mm-135mm, profile visible width range: 25mm-120mm, equipment: 4 gasket groove drilling units/4 internal corner measuring devices/4 shadow groove cutters/2 external contour units. Including various accessories and tools. Documentation available. An inspection on site is possible. Kodpjyn N Apjfx Adqsdr

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 80 mm, We offer this very good Morbidelli Uniflex HP Throughfeed Borer and Router CNC, year of construction 2016. Manufacturer: Morbidelli Model: Uniflex HP Year of manufacture: 2016 Condition: very good Category ID: 2074 Type ID: 151 Machine type: Throughfeed Borer and Router CNC The Morbidelli UNIFLEX HP is a high-performance CNC drilling and routing centre designed for precision panel processing in furniture and cabinet manufacturing. It allows drilling on multiple faces of a panel and routing operations with high accuracy while minimizing setup time through automated clamping and CNC control. Key Features • 6-side panel drilling capability with upper and lower machining heads • Up to 134 independent spindles for high production throughput • RO.AX rotoaxial spindle technology ensuring zero backlash and extremely accurate drilling • Dual independent clamps eliminate machine setup time and allow simultaneous operations • Ability to process two overlapped panels simultaneously • Integrated saw blade in X-axis for panel cutting operations • Heavy-duty welded O-frame structure for maximum rigidity and precision • CNC controlled panel movement with brushless motors and ball screws • Xylog Plus 2 CNC software with PC interface Drilling System • 96 vertical drilling spindles (48 upper + 48 lower) • Horizontal drilling spindles: o 8 + 8 in X direction o 4 + 2 in Y direction • Maximum spindle speed: 6,000 rpm • Integrated X-axis saw blade: Kdedpfx Aeyr Uguodqjr o Diameter: 125 mm o Speed: 7,500 rpm CNC Control & Software • Industrial PC with Windows operating system • 17" colour display and keyboard interface • Xylog Plus 2 programming software • Programming options: Parametric programming • DXF and ASCII file import support • Simulation and optimisation of drilling cycles Panel Capacity • Panel length: 250 – 3000 mm • Panel width: 70 – 1300 mm • Panel thickness: 10 – 80 mm • Maximum panel weight: 100 kg Axis Speeds • X axis: 120 m/min • Y axis: 35 m/min • Z axis: 30 m/min Machine Requirements • Compressed air: 6.5 bar • Average air consumption: 500 Nl/min • Dust extraction airflow: o Upper head: 5000 m³/h o Lower head: 2250 m³/h Additional Equipment Included • Panel length measuring device • Electrical cabinet with air conditioning • Manual loading and unloading stations with cross belts If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2011, condition: used, This is an 115-liter electric braising pan, MAGNUM 3/1 GN, from the premium manufacturer MKN, type Optima 850. The braising pan is a multi-functional device for poaching, boiling, simmering, stewing, and frying. It is emptied via a safety drain valve on the front. The device has been inspected in our in-house workshop and is fully functional. The braising pan has been completely refurbished and is in excellent condition. You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on all electrical parts High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: Kdodpfx Aezu Rpcsdqor W x D x H: approx. 1300 x 850 x 850 mm Inner pot W x D x H: 700 x 540 x 250 mm Power connection: V: 400 / kW: 19.2 Serial number: 11203758 Type: 2022705 Year of construction: 2011 Nominal capacity: 115 liters Condition: Used, inspected and fully functional Further information: Multi-functional cooking appliance for poaching, boiling, simmering, stewing and frying Braising pot made entirely of highly corrosion-resistant chrome-nickel steel Frying surface made of special sandwich material (MKN PowerBlock), smooth-ground Heated by SUPRA contact heating elements for optimal heat distribution and short heating times Braising pot with raised edge, tightly welded High thermal capacity ensures uniform heat transfer and minimal temperature fluctuations when the plate is loaded with cold food Standard with electronic "Eco Control" Standard with double-walled hinged lid and mixing tap Emptying via safety drain valve to the front Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday - Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: ready for operation (used), Year of construction: 2022, controller manufacturer: TRUMPF, controller model: Touchpoint TruBend, overall weight: 30,500 kg, total width: 5,150 mm, total height: 2,995 mm, product length (max.): 6,500 mm, Folding Machine manufactured in 2022. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details. • Capacities • Max bending edge length: 3,123 mm • Min bending edge length: 200 mm • Min bending width with standard holder: 145 mm • Min bending width with ENW tools: 40 mm • Max box height: 220 mm • Holder clamping force: 101 t • Material thickness: min 0.4 mm; max structural steel 3.0 mm; max stainless 2.2 mm; max aluminum 4.0 mm • Machine construction: Welded steel frame; bending system: Wedge drive; crowning: Included, adjustable via machine control • Manipulation and positioning • 2-axis part manipulator with suction cups (X travel 2,653 mm; stroke 100 mm; 12 suction modules) • 5-axis rear stop; rotary manipulator; front stop; loading pincers • Automatic part positioning and rotation • Speeds • Y-axis rapid traverse: 250 mm/s • Front stop speed: 3,000 mm/s • Part manipulator speed: 3,000 mm/s • Rotary manipulator speed: up to 3 rev/s • ToolMaster Bend speed: 2,400 mm/s • Positioning accuracy • Y-axis: 0.10 mm; X-axis: 0.05 mm; R-axis: 0.05 mm • CNC control • 21.5-inch touchscreen; OS: Windows 7 Ultimate 64-bit • Keyboard and mouse; USB; RJ45 network; Ethernet 10/100 Mbit/s • Internet teleservice / remote diagnostics • Bend angle measurement • Optical bend-angle assistance; integrated camera; graphical comparison of programmed vs. actual angle • Minimum part-side length for angle measurement: 10 mm • Safety equipment • CE certification; rotating safety doors; safety light barriers; working-area access protection • Foot switch with enable function; emergency stop • Electrical data: 80 kVA Additional equipment • Automatic loading/unloading system with storage interface • Automatic blank separation/feeding/transfer; automatic finished-part unloading • Belt conveyor for finished parts; max blank size 3,048 x 1,500 mm • Storage interface included • Loading trolley: Not included; Rail set: Not included • Tooling and tool systems • ToolMaster Bend: Automatic hold-down tool positioning and setup; automatic positioning of standard, Pick&Place, and curved holders • Included tooling: 16 standard hold-down tools (160 mm each); 6 Pick&Place hold-down tools; Pick&Place segments 10/15/20/40 mm; corner hold-down tool (199 mm); OBW90 and UBW90 bending tools • ENW equipment: ENW function for tilting hold-down tools; ENW110-40 tool (length 3,123 mm; depth 40 mm); min bending width with ENW tools 40 mm • Additional part handling modules • 12 three-surface vacuum modules (upper/lower/front suction) • 6 magnetic modules; 4 two-surface magnetic modules • Vacuum and magnetic modules can be used together • Software and data capture Kjdpozvdc Sofx Adqsdr • TecZone Fold floating license: automatic programming from 2D/3D data, automatic bending program generation, 3D simulation, collision checking, manual modification • Wireless 2D code reader with Bluetooth: barcode and DataMatrix reading; automatic production program loading

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. Kdodegq N Ezspfx Adqsr JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality

Year of construction: 2020, condition: used, functionality: fully functional, This is a combination steamer, model CMP 201, in an electric version, manufactured by the premium brand Rational, built in 2020. The unit features an automatic self-cleaning program! The combination steamer has only 982 operating hours. The combination steamer is located in our in-house workshop and will undergo a thorough inspection before being sold with a 6-month warranty. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational model? Ask us, we have access to a wide range of used and new equipment. We will gladly advise you on all model types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: Kdodpfx Aezmu Akodqor 6-month warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. High-quality branded equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional. Flexible options for shipping or self-collection. Competent advice – before and after purchase. Provision of operating manuals, connection diagrams & spare parts. Inspection according to DGUV V3. The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow, and cooking time. Technical data: W x D x H: approx. 879 x 791 x 1782 mm Power connection: 400 V / kW: 37.0 / 50-60 Hz Weight: approx. 254 kg Serial number: E21MI20022814161 Year of construction: 2020 Condition: Used, inspected and fully functional. Further information: Possible applications: Steam operation: from 30° C to 130° C Hot air operation: from 30° C to 300° C Combination operation: from 30° C to 300° C Finishing®: prepares pre-cooked and chilled dishes to the optimal serving temperature in an ideal climate. Automatic separation of fat for clean cooking chamber air. Automatic cleaning program. 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food. Ventilated double-glazed door (swivels for easy cleaning). Cooking chamber lighting. Core temperature measurement by means of a sensor. Cool-down function. High-performance fresh steam generator (automatic rinsing and emptying). Handheld spray nozzle with automatic retraction. Dynamic air circulation. Shipping: Delivery or self-collection by arrangement. Worldwide shipping on request. Shipping to islands or mountain stations only by arrangement. Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding Station 8 kVA Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Mains supply: 400V Mains frequency: 50 / 60 Hz Kjdpfol Smn Sex Adqedr Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Heat current 100 %: 0,88 kA Year: 2014 Weight: 85 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: used, Year of construction: 2009, machine/vehicle number: 3122 102 015, functionality: fully functional, operating hours: 36,000 h, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, total height: 1,900 mm, overall weight: 2,700 kg, Equipment: CE marking, documentation/manual, CNC Metal Sawing Center Kasto Kastoflex F Year of manufacture: 2009 Operating hours: 36,000 h Machine depth: 4,800 mm Machine height: 1,900 mm Machine weight: 2,700 kg Voltage: 400 V With automatic feed Offcut bunker Coolant system Mitre cutting Loading station, chain magazine with 20 compartments on the infeed side Discharge sorting station, outfeed side with a 5 m long belt and programmable outfeed stations on both sides Minimum quantity lubrication Including from Kasto: 2 double-sided heavy-duty roller racks with 2 uprights, each with 4 levels System professionally stored Ready for collection Layout attached Kdjdey Alufjpfx Adqsr Transport, reassembly, and commissioning at buyer’s expense

Condition: excellent (used), Year of construction: 2002, Model .Amada. Vipros 368 King Stock number 01967 Year of manufacture 2002 Frame Construction ... Bridge Type Press Capacity ... 30 Tonnes (294 kN) Press Type ... High Speed Hydraulic Servo Ram Kedpfsvn D Tfsx Adqedr Axis Traverse Distance ... 1525 x 2000 mm Workable Max. Sheet Size ... 1525 x 4000 mm (with auto repositioning) Max. Material Thickness ... 3.2 mm mild steel Max. Hole Dia. Max. Material ... . (shearing strength 36 kg/mm2) 82 mm dia Max. Material Weight ... 75 Kg Max. Material weight ( Max. Speed) ... 60 Kg Max. Hole Dia. ... 114.3 mm Number Of Stations ... 58 stations:24 x 12.7 mm 24 x 31.7 mm 4 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm 2 x 114.3 mm Axis Speed ... 113.0 m/min Hits Per Minute (2mm pitch) ... 860 H.P.M./3 mm stroke (8mm pitch) ... 560 H.P.M./3 mm stroke (25mm pitch) ... 460 H.P.M./3 mm stroke Turret Speed Bi-Directional ... 30 R.P.M. Punching Accuracy ... ± 0.1 mm (incl. 1 reposition) Ram Stoke Length (maximum) ... 40 mm Tool Lubrication ... Air Blow System Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 28 kVA 400V +/- 10% 50Hz Air Pressure Required ... 5.0 Kgf/cm2 Air Flow ... 250 1/min Cooling Water Flow ... Min 40 1/min. Machine Length ... 5025 mm Machine Width ... 4120 mm Machine Height ... 2630 mm (3190 mm to mirror) Machine Weight ... 18000 Kg

Year of construction: 2012, operating hours: 3,500 h, condition: used, functionality: fully functional, P System fully automated hydraulic pelleting line with patented hydraulic pelleting system. Mono roller, hydraulically operated with a unique load sensing system. Features automatic vegetable oil injection at startup and shutdown. Continuous rated production 350kg/hr (peak 500kg/hr) - Fully automatic, operates without human intervention. In its current setting it worked 12hrs continuously alongside log production, but can operate continuously if required. Line includes the following:- 50m³ moving floor container with hydraulic operated lid. Material level viewing windows, and unloading cross auger. Incline discharge auger with magnetic separator. First stage hammer mill for material up to P16 (G30). Pneumatically conveyed to minisolo. Mini silo distribution hub with hydraulic agitator. Equipped with cyclone and transfer fan. The unit has an additional port covered with a blanking plate to allow addition of another pelleting module. Second stage hammer mill and rotary valve controlled by pelleting module. P300 - 30kW pelleting module with PCL control system. All motors other than the main drive are hydraulic and controlled by the pelleting module. The system has a moisture sensor which injects water into the second stage hammer mill to control pellet quality. Die temperature is monitored by a temperature probe and controlled by compressed air injection. Automatic oiling system on startup and shutdown. 6m Discharge cooling and screening auger. Pellets are conveyed, cooled and screened for dust by hydraulically driven auger. Kjdpfx Aozcf Dledqsdr Double filter air extraction unit. The line is in good condition and comes with a set of spare parts, dies and rollers. PCL control unit and main drive gearbox were replaced over a year ago. It has been serviced well and can be demonstrated working if required, with your material. Not included in offer, but available by request 4000L pellet hopper made from galvanised steel metal, with pneumatically operated hopper. Semi-automatic bagging plant, 5kg - 30kg capacity. Plastic sack heat sealer. Pellet quality test equipment. 5m Bucket elevator made by Perrys of Oakley.

Condition: good (used), functionality: fully functional, machine/vehicle number: WJMBB0A8M04010094, mileage: 24,500 km, overall weight: 7,500 kg, axle configuration: 4x4, color: red, Year of construction: 1995, Sales Description – Iveco Magirus 80.16 4x4 Firefighting Demonstrator Vehicle We are offering for sale our seldom-used IVECO Magirus 80.16 4x4 demonstrator vehicle, which was custom-built in 2013 together with Jacinto (Portugal) for demonstration purposes. Kdodpfx Adex Uy Rljqor The vehicle is based on a robust chassis from 03/1985 with just 24,xxx km mileage. The superstructure, including the fire centrifugal pump, was newly manufactured in 2013. The pump has only 34 operating hours. This fire engine is fully equipped and comes with a complete inventory. In addition, it features a fully automatic light mast and an 8.5 t front winch. Vehicle details: Model: Iveco Magirus 80.16 4x4 Chassis Year: 1985 Superstructure: 2013, Jacinto (Portugal) Mileage: approx. 24,000 km Centrifugal Pump Operating Hours: 34 h Equipment: Front winch (8.5 t), automatic light mast, full loading/inventory Equipment by locker (stowage compartment): Front left locker: Bolt cutter 2x Dräger breathing apparatus Hydraulic rescue spreader Hydraulic rescue cutter Power unit for rescue tools Projector Tarpaulin Fire extinguisher Hose cassette Middle left locker: Fireco high-pressure pump (water/foam) High-pressure lance Various hose management accessories Rear left locker: Connection high-pressure pump to hose reel Various hose management accessories Outlet: 1x water / 1x foam Rear locker: Pump control station Light mast controls 1x suction inlet 1x water supply 1x "emergency exit" water outlet 1x rapid attack hose reel Rear right locker: Supply/transport hoses Pressure hoses "Lifeline" 1x pressure relief valve Outlet: 1x water / 1x foam Middle right locker: Backup generator (for light mast) 5x traffic cones 1x water curtain 1x suction strainer incl. rope 1x first aid kit 1x canister Front right locker: Petrol-driven fan Foam branchpipe Hose bridges Hooligan tool Chainsaw Hose section Various equipment Right underfloor compartment: 5x warning lights Diesel tank Left underfloor compartment: Batteries 1x wedge Pneumatics Remarks: The vehicle has been used exclusively for demonstration purposes. It is technically in excellent condition, but both the chassis and body do not comply with the latest standards for new acquisitions—which is the reason for this sale. Ideal for fire brigades with a limited budget or for export.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,818 h, travel distance X-axis: 155 mm, travel distance Y-axis: 25 mm, travel distance Z-axis: 170 mm, controller manufacturer: FANUC, controller model: 32i-TB, number of axes: 8, This 8s Muratec MW 40 was manufactured in 2019. It features a twin-spindle configuration with automatic loading and unloading capabilities. The machine includes 2 C-axes and 2 Y-axes, providing versatile machining options. With a total of 7 turning holders and 6 boring holders, it is designed for efficient part handling. If you are looking to get high-quality turning and milling capabilities, consider the Muratec MW 40 turn-mill centre we have for sale. Contact us for further details. • Configuration: Twin-Spindle CNC Turning Centre • C-Axes: 2 • Y-Axes: 2 • Gantry Loader: Double Gantry Loader • Spindle Configuration: Twin Spindle • Tool Holders: 7 Turning Holders • Tool Holders: 6 Boring Holders • Condition: Fully Functional • Turning Station • Voltage: 400 V • Frequency: 50 Hz • CE Marking: Yes • Loader Type: Gantry Loader • Automation: Automatic Loading and Unloading System • Part Handling: Automatic • Turning Capability: Yes • Drilling Capability: Yes • Milling Capability: Yes • Tapping Capability: Yes • Coolant Filtration: Basket Filter • Transformer: 16 kVA • Transformer Input Voltage: 400 V • Transformer Output Voltage: 200 V • Hydraulic Chuck Foot Switches: 2 • Tool Monitoring System: Muratec Cutting Monitor • Tool Management System: Tool Counter with Sister Tool Selection • Polar Coordinate Interpolation: G12.1 • Cylindrical Interpolation: G7.1 • Rigid Tapping: Yes • Coolant and Air Through Spindles: Yes • Twin Front Spindles: Yes • Books are included (instruction manual in German) Optional: Kdjdpfx Aszcwiyedqor • Parts Infeed Conveyor • Parts Outfeed Conveyor • Chip Conveyor Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2018, operating hours: 34,000 h, functionality: fully functional, Great opportunity! Like-new Salvagnini S4 / P4 from the first owner, built in 2018! The machine is in perfect, like-new condition and ready for immediate use! The system has been regularly serviced by Salvagnini, and the machine is covered by a maintenance contract. Technical data and Salvagnini internal number: Punching machine/shear with rotating station S4Xe.30 consisting of: Conveyor belt TAC30.L2000 Corner turning device DA30 Punching machine S4Xe.30 Punch head H3 Oil-dynamic hydraulic unit HU22E Control and management of the SiX system Kedpjzh I Iisfx Adqedr Right-angle shear CS5S Turning device DF Lower cylinder EI09 Embossing unit BU30 Double rotating punch P2R3132 Double rotating punch P2R3334 Threading roll unit ME35 Device for automatic application of self-adhesive labels LBC (label printer) Portal robot MC30 Conveyor with brushes CTS30 Shear lift table TCV3015 Water-air cooling unit R81E Tools (detailed list available on request) P4Xe-3125 Swivel bending machine including roller and turning station consisting of: Shear lift table TCV3015.CT.RPC Feeder-destacker device PCD3015 Turning device RIP3015 Bending center P4Xe-3125 Upper bending die LS Lower bending die LI Programmable clamping device U1 Standard clamping foot NS Control and management of the SiX system Work surface with balls SFE Device for cleaning and lubricating the bending dies PSE Asymmetrical control for auxiliary bending tools for positive bends CLA-A CLA tool set with "swan neck profile" UCE1500G38 Asymmetrical control for auxiliary bending tools for negative bends CLA-N-A CLA tool set with "swan neck profile" for negative bends UCE1500NG38 Device for V-notch RSU.UR-4 Swiveling device for auxiliary tools T Option for cutting and dispensing profiles CUT.SPC31 T-tool for 90° bends UTZ2 Delivery device/buffer for panels SAP34.POS The system has a hinged belt conveyor for central disposal of the sheet metal sections. These are then conveyed to tipping containers via a swan neck conveyor. Sorting according to stainless steel, aluminum, and black sheet metal is fully automatic. A weighing and level measuring device is integrated and reports the level via the control system. The machine can be inspected and tested by arrangement. Additional videos and detailed images of the system are available on request!

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: S120598-5-10, STOPA Storage System – 66.15 m Length – 850 Pallet Positions – Year 2014 – Excellent Condition We are offering for sale a high-performance industrial pallet storage system by STOPA, serial number S120598-5-10. System specifications: - Total system length: 66.15 meters - Total pallet positions: 851 - Actual usable pallet positions: approx. 500 - Platform dimensions: 3000 x 1500 mm per level - Number of towers: 33 - Pallet slots per tower: 29 - Loading/unloading stations: 11 - Minimum required installation ceiling height: 9.4 m - Year of manufacture: 2014 - Condition: Very good – clean, maintained The system is currently disassembled and stored indoors at a warehouse in Piaseczno, Mazowieckie, Poland. Live demonstration is not possible, but the system was fully functional at the time of disassembly. Complete technical documentation is available. Loading and transport assistance can be provided. Ksdpfxjw Eb N Ds Adqjdr Reason for sale: change in warehouse layout concept. This is a premium solution for companies seeking to expand or modernize their pallet storage capacity with a reliable, high-capacity system. For further details, photographs, or to arrange an inspection, please contact us.

Condition: excellent (used), Here we offer you a Bielomatik laser welding system. Bielomatik laser welding system Machine description: The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame. The tools are mounted on a 2-station rotary table that rotates 180 degrees with each cycle. In the middle part of the machine frame, there is the working area with the welding station, the tool (on the rotary table), and the clamping device for the product. The control cabinet is installed at the rear. The welding station is protected against the loading/unloading area with a laser-safe enclosure. The welding laser (the laser power supply) is switched off when a maintenance door is opened. The loading and unloading of the welding parts is done manually. The welding process runs automatically. Laser type: YLR-300-AC-Y11/IPG The cell was used for laser welding of various plastic parts (front frames). For components with dimensions of approximately 460 x 280 mm. Basic data Machine equipment: Kdodpfxszgaazo Adqjr 1 complete machine frame with enclosure, substructure, and safety devices, painted Adjustable machine feet, designed for transport with a forklift. 3 manual maintenance doors in the laser-safe processing area, each secured with a safety door switch with interlock. 4 manual maintenance doors below the machine table. The control cabinet is permanently mounted on the rear of the machine. Laser system manufactured by IPG. 1 fiber laser, 300W cw, at the fiber optic end, 1070nm, completely air-cooled. 1 power supply for the laser unit, target beam laser, and fiber optic cable. 1 Vario-Scan for 3D welding contour. 1 scanner - 20 aperture. Optics, F-Theta lens, focal length determines the processing field and processing distance. 2x base tool, tool coding with transponder. Clamping/tensioning system for holding a mask with absolute encoder. with pneumatic clamping system for controlled pressing of each welding part. Pneumatic air shower for protection of the lens housing. Microbox PC427B incl. RTX (Siemens). Pre-installed software, Siemens S7 PLC. Profibus, Profinet, Ethernet, RS232 interface. Touch panel 15" for operation and input of data/parameters. Machine lighting. Connection flange for external extraction system. Machine data: Dimensions: Machine W x D x H: approx. 2330 x 2350 x 2500mm Control cabinet: Permanently screwed to the machine frame. Area required W x D: 5400 x 5400mm Technical data: Power supply: Number of phases/rated voltage 3x400V 50Hz Connected load 5KVA Fuse rating: 16A Exhaust: Nominal size ∅160 Airflow rate 500-1000 m³/h Weight approx. 2000 kg Type: K3633/023 Condition: used (Changes and errors in the technical data are reserved!) We are happy to answer any further questions you may have by telephone.

Condition: used, functionality: fully functional, control type: PLC-controlled, degree of automation: automatic, Equipment: CE marking, CraneMasterStoreLinear S-DOWN 1530: A loading and unloading device offering an efficient connection between the machine and the storage system. It makes the automation of storage, logistics, and loading and unloading of material and cut parts, including the associated offcuts, even more efficient. It offers all the automatic functions expected of a CraneMaster system, such as efficient loading of material from the storage to the cutting machine's pallet, and simultaneous unloading of cut parts to the storage or to a discharge station. The system is recommended for manufacturing and service companies expecting the highest performance, with production ranging from low to medium or high volume. Additional Options: - Automatic sheet separation - Automatic sheet thickness measurement - Anti-collision system - Automatic grate cleaning system - Gripper adjustment system - Additional conveyor for cut parts - Independent control of suction cups - Double the number of suction cups - Precise measurement of the weight of the storage tower Kjdozrfy Djpfx Adqsdr eTower 240 sheet storage system – This is an automatic sheet storage system that works with the loading and unloading system of the CraneMasterStore or CraneMasterStoreLinear laser cutting machine. The eTower2 material storage system consists of a storage column, which also functions as a transport column, with an elevator moving within it. The elevator's task is to move shelves between the storage columns and the loading and unloading locations. In addition, the system is equipped with a movable external loading and unloading station.

Condition: excellent (used), functionality: fully functional, SPX APV & ALFA LAVAL | Industrial CIP Valve Manifold (Hybrid Process Valve Block on a Frame) Manufacturers: SPX FLOW / APV and ALFA LAVAL Model / System Type: DELTA / UNIQUE MIXPROOF (Integrated single- and double-seat valve block) Control Heads: SPX APV (CU4 series model, including CU41N S AS-i) Control Heads and Actuators: ALFA LAVAL Main Component Identifier: Olympia BE-0112005 / DS53XVE03 Configuration Factory Code: 13085-089614-E Power and Communication: Industrial AS-Interface network bus, pneumatic actuator power supply Construction Material: AISI 316L / 1.4404 grade stainless steel Supporting Structure: Factory-made stainless steel support frame with adjustable leveling feet This professional, hybrid valve manifold, based on components from SPX APV and Alfa Laval, represents a top-class industrial distribution hub. This device is the absolute core of liquid flow management systems, automatic process distributors, and advanced CIP (Cleaning In Place) stations. This type of valve block is a key pillar of infrastructure in large and medium-sized dairy plants, breweries, fruit and vegetable processing plants (juice, beverage, and concentrate production), as well as in the production of liquid ready meals, sauces, and in the chemical and food industry. The use of Mixproof technology (double-seat valves) from Alfa Laval, combined with SPX APV CU4 digital control, solves one of the biggest problems in liquid logistics: it allows the simultaneous flow of two completely different media (e.g., a finished food product and an aggressive cleaning agent, such as lye or acid) through a single valve block, without any risk of cross-contamination. When switching, special drain chambers immediately remove any remaining residue, providing a 100% guarantee of microbiological cleanliness. Thanks to AS-Interface communication, the manifold transmits real-time feedback signals about the exact position of each valve seat directly to the main PLC controller (e.g., Siemens S7). This prevents operator errors, reduces technological downtime, and allows for the simultaneous cleaning of one section of the pipeline while continuous production continues on the other. The compact mounting of the entire unit on a sturdy, stainless steel frame (so-called skid construction) dramatically reduces installation costs in a new or modernized plant. Key features and advantages: - Hybrid of best technologies (SPX APV + Alfa Laval): Combines the mechanical reliability and sealing of Alfa Laval stainless steel with the advanced control and monitoring electronics of the APV DELTA CU4 series. Kdsdoy Ufglepfx Adqor - Quick installation and space saving: A complete, compact valve block mounted on a stable mounting frame – delivered as a plug-and-play unit, minimizing the time required for line modernization.

Year of construction: 2006, condition: used, functionality: fully functional, Multi-purpose chamber furnace line consisting of the following components: • Aichelin chamber tempering and stress-relief furnaces VKHLE 4/2-70/85/130 (2 units) • Aichelin chamber preheating furnace VKHLG 4/2-70/85/130 (1 unit) • Aichelin single-chamber continuous furnace DGKS 4/2-70/85/130 (3 units) • Aichelin chamber washing machine EKFG 4/2-70/85/130 (1 unit) • Aichelin loading/unloading trolleys (2 units) • Aichelin table loader storage station (1 unit) • Aichelin transfer table storage station (1 unit) • Aichelin cooling unit storage station (2 units) Kjdpfexwn R Njx Adqodr • Storage stations (30 units) • Charging racks • Spare parts for the line Useful load: Grate length: 1300 mm Grate width: 700 mm Loading height above grate: 800 mm Max. batch weight: gross max. 1000 kg/grate Aichelin chamber tempering and stress-relief furnace VKHLE 4/2-70/85/130: External dimensions: Width: approx. 1820 mm Height: approx. 4050 mm Length (incl. control cabinet): approx. 3300 mm Working height above floor: 1600 mm General data: Maximum temperature: 350°C Operating temperature: 150-200°C Number of temperature control zones: 1 Chamber preheating furnace VKHLG 4/2-70/85/130: External dimensions: Width (incl. control cabinet): 3035 mm Height (overall): 4450 mm Length (overall): 3450 mm Loading height above floor: 1600 mm General data: Maximum temperature: 600°C Operating temperature: 400-500°C Number of temperature control zones: 1 Single-chamber continuous furnace DGKS 4/2-70/85/130: External dimensions: Width (incl. control cabinet): approx. 3400 mm Height (incl. maintenance platform): approx. 5300 mm Length (incl. exhaust hood): approx. 6850 mm Working height above floor: 1600 mm General data: Maximum temperature: 1050°C Operating temperature oven: 750-1000°C Temperature control range oil bath: 60-150°C Gross batch weight at 950°C (max.): 1000 kg Max. gross heating capacity from 25 to 850°C (max.): 800 kg/h Number of temperature control zones in oven and oil bath: 1 + 1 Oil bath volume: approx. 6.5 m³ Cooling capacity oil bath (at 90°C bath temperature): 80 kW Chamber washing machine: External dimensions: Width: 2900 mm Height (above hall level): 4000 mm Length: 3150 mm Loading height: 1600 mm General data: Washing fluid temperature: 50-80°C Spray fluid temperature: 50-80°C Bath volume, washing fluid: 4550 l Bath volume, spray fluid: 4700 l Gross weight incl. batch and washing fluid: 125 kN Loading table: Width: approx. 2200 mm Length: approx. 3200 mm Loading height: 1600 mm Weight (incl. batch): approx. 29 kN Batch cooling stations: Length: approx. 2100 mm Width: approx. 800 mm Height: approx. 4350 mm Loading height: 1600 mm Weight (incl. batch): approx. 20 kN Preparation table fixed: Length: approx. 2100 mm Width: approx. 800 mm Loading height: 1600 mm Weight (incl. batch): approx. 25 kN Preparation table, hydraulically height-adjustable: Length: approx. 2100 mm Width: approx. 800 mm Lift: 1000 mm Loading height: 1600 mm Lifting capacity: 2.0 T Weight (incl. batch): 25 kN The sale covers the entire multi-purpose chamber furnace line. Individual furnaces, systems, or components cannot be purchased separately. The complete chamber furnace line must be dismantled, loaded, and transported by the buyer at their own expense. Inspection appointments can be arranged on request.

Condition: new, functionality: fully functional, power: 30 kW (40.79 HP), Year of construction: 2025, A double roller crusher for sand making, also known as a roller sand making machine, is a processing machine that utilizes two rollers to crush and reshape coarse-grained materials such as rock, stone, and ore into finer particles. This type of equipment is commonly used in the production of construction aggregates, artificial sand, and other materials used in various industries. Here are key features and aspects of a double roller crusher for sand making: 1. Double Roller Design: - The crusher has two parallel, counter-rotating rollers that exert pressure on the material. The gap between the rollers can be adjusted to control the size of the crushed particles. 2. Crushing Mechanism: Kjdpfx Adsq Ngameqodr - The material is fed between the two rollers, and as they rotate, the material is drawn into the crushing zone. The rollers compress and crush the material, reducing it to the desired size. 3. Material Feed and Discharge: - The material is typically fed into the top of the crusher and is crushed between the rollers. The crushed material exits at the bottom of the machine. 4. Adjustable Gap Settings: - The gap between the rollers is adjustable, allowing for control over the final size of the crushed material. This feature is essential for producing materials of different particle sizes. 5. Roller Surface Design: - The surface of the rollers may be smooth or have corrugations to enhance the gripping and crushing action. The choice of roller surface design depends on the characteristics of the material being processed. 6. High Efficiency: - Double roller crushers are known for their high efficiency in crushing and shaping materials. The dual roller design provides a more consistent and controlled process compared to single roller crushers. 7. Versatility: - These crushers are versatile and can be used for various materials, including hard and soft rocks, ores, and other aggregates. They are particularly suitable for producing artificial sand. 8. Dust and Noise Control: - Some double roller crushers are equipped with features to control dust emissions and reduce noise during operation, improving the working environment. 9. Application in Sand Making: - Double roller crushers for sand making are commonly used to produce fine aggregates and artificial sand. They are employed in the production of high-quality sand for construction and other applications. 10. Maintenance and Safety: - Regular maintenance is essential for optimal performance. Safety features, such as emergency stops and safety guards, are often incorporated to ensure safe operation. 11. Motor and Drive System: - A powerful motor and a reliable drive system are essential components to drive the rotation of the rollers and ensure consistent and efficient crushing. The specific design and features of double roller crushers for sand making can vary among different models and manufacturers. When selecting or using this type of equipment, it's important to refer to the manufacturer's guidelines and specifications for proper operation and maintenance.

Year of construction: 1986, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 530, Industrial Double-Drum Winder W04 – Winding Machine For sale: industrial W04 winding machine designed for winding flexible plastic products, profiles, tubes, cords, strips, or similar continuously extruded materials. Kdodozu Nf Aopfx Adqer The machine was previously used in production as part of an extrusion line. Basic information: Machine type: industrial winding machine Designation: W04 Year of manufacture: 1986 Double-drum design Drum 1 / Stop / Drum 2 / Reset controls Emergency stop button Traverse mechanism for even material distribution Adjustable operation Electrical control cabinet IMO iSmart controller Lenze frequency inverter 24 V power supply Mounted on a mobile steel frame This is an older, robust industrial machine. The electrical system has been upgraded during its service life. Condition and equipment are shown in the photos. Suitable for further use in production, refurbishment, or as a base for a custom winding application. Location: Ivanka pri Nitre, Slovakia Price: €3,000 For further information or additional photos, please contact me via message.

Condition: good (used), functionality: fully functional, Year of construction: 2013, laser power: 2,700 W, X working area max.: 2500 mm Y working area max.: 1250 mm Control system: Rexroth IndraMotion MTX (basic version) Laser power: 2700 Watt Standard Equipment Machine - Sturdy, easily accessible C-frame - Coordinate guide system for high-precision machining - Linear magazine with 23 tool stations and 2 clamps - Maintenance-free three-phase drive motors - Repositioning unit with programmable hold-down device - Foot pedal for clamp closing - Alignment pin (right inside) - Ball tables - 2 parts flaps 500 x 500 mm incl. sensor for parts ejection - Two good parts containers - NitroLine - Focus Line - FastLine - FlyLine - Slag cone detection - Ejector cylinder for laser parts TRUMPF Laser - TruFlow 2000 laser with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control - Enclosed beam guidance - Fine filtration of compressed air for beam tube ventilation Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change system UTI with bus connection - ControlLine Punching Station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down device with manually adjustable holding force - Stroke counter for punch and thread-forming - Punch spray lubrication - Punch slug extraction - Measurement of fill level in punching console - Level monitoring for thread-forming and tool lubrication Control - TRUMPF control based on Rexroth IndraMotion MTX - Operating panel with 17" touch screen - Integrated technology data - Teleservice via internet - Programmable cutting gas pressure - Automatic shutdown incl. wake-up mode - Program management - Production scheduling Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Two-beam light curtain - Monitoring system for gas pressure, temperature, and cooling water - Emergency stop - Protection against stray radiation - Compact extraction unit Kjdpjy Saqmjfx Adqsdr + Brush tables + Lowerable die + MultiTool function + Softpunch function + Marking function + Chip conveyor with tilting container + Roll technology functions: roll knurling, roll deburring, roll shearing, roll offsetting, roll bead forming, roll cutting + Die spray lubrication + Blow-off device for small parts + 1 pc. additional clamp + Smart Punch Monitoring (punch breakage monitoring) + Vibration-damped installation + Repositioning cylinder + Warping detection + Parts conveyor belt in punching area + Parts conveyor belt in laser area + GripMaster (2500x1250) + Scissor lift table + Scrap grid pallet + SheetMaster (2500x1250) (AK04) + Peeling system + Automatic clamp closing + HZP loading/unloading + TwinCarts loading station with toothed belt drive + TwinCarts unloading station with toothed belt drive

Condition: good (used), Year of construction: 1990, functionality: fully functional, ORMA Hydraulic Frame Presses DE 30/18 Manufacturer: Orma Machine Italy Year of manufacture: 1990 Maximum working dimensions: 3000 x 1800 mm Maximum working depth: 90 mm Vertical pistons: 2 Maximum piston pressure: 2000 kg Horizontal pistons: 2 Motor: 0.55 kW Width = 850 mm Length = 3700 mm Height = 2310 mm Ksdpfsv Iv Sgox Adqodr Features: Robust frame Easy adjustment and adjustment of the orthogonality and parallelism of the cross members Working accuracy Easy locking and control of the double-acting pistons Installation for small workshops and for assembling and aligning various components such as doors, windows, louvre doors and windows, simple frames, etc. The pistons are oil-driven.