Used Temperature Unit Water 160° for sale (44,041)

Condition: used, Year of construction: 2004, Additional title: water deaeration Capacity: 50 hl/h O2-contents after deaeration: 0,5 ppm Temperature: 16 °C Pressure: 4 bar Power: 1,0 kW Voltage: 380 V Frequency: 50 Hz Itjdjxw R Rxepfx Akpsn Operation / Control: Fully automatic / Steuerung S7 Material: Frame: 1.4301, pipes: 1.4404 Features: Water line (pneumatic flap valves, flow meter, check valve, sampling valve), membrane module (water inlet from below), CO2-line (flap valve, pressure reduction valve, flow meter, manual regulation valve) Vaccum line (Flap valve, vacuum pump (ELMO), manual regulation valve), plate heat exchanger (Thermowave), pressure boosting pump (Hilge, 4,5 bar with 250 hl/h, 7,5 kW motor)

Condition: new, *Technical standard specification: Itjdpfxsfnvwqj Akpon Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: used, Weiss Type: SWT 600/800-S Spray Water Test Unit for IP protection tests IPX1 / IPX2 / IPX3 / IPX4 / IPX4K / IPX9K For sale is a professional spray water test unit from Weiss Umwelttechnik GmbH. The unit is used to perform standardized water, spray water, and ingress protection tests on components, housings, electronic components, vehicle parts, and technical products. Suitable for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch panel. Test sequences can be automated. The unit features a stainless steel test chamber, rotating test table, swivel arm, water circulation, and available test accessories. Technical data according to the nameplate / documentation: Electrical data: Voltage: 3/N/PE AC 400 V ±10 % Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram No.: 82962 CE marking available Water connection according to documentation: Iodozachcepfx Akpjtn Water inlet: R 3/4" Water outlet: R 1 1/4" Water pressure supply line: approx. 2 – 6 bar Water pressure IPX9K: adjustable approx. 80 – 100 bar Turntable speed: approx. 1 to 5 RPM Swivel speed: approx. 60 °/s Permissible ambient temperature according to documentation: approx. 10 °C to 35 °C Dimensions and weight: Test chamber SWT 600/800: approx. 2350 x 2400 x 2650 mm with hinges and door lock Test chamber without hinges and door lock: approx. 2350 x 2400 x 1850 mm Weight of the test chamber: approx. 650 kg High-pressure unit: approx. 850 x 1200 x 800 mm Weight of the high-pressure unit: approx. 380 kg Total weight according to available data: approx. 1030 kg Noise level according to documentation: approx. 88 dB(A) Heat dissipation to the environment: average approx. 1 kW maximum approx. 3.5 kW Equipment: Touch panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earthing point CE marking Robust industrial design Available documentation: Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories include, among others, as shown in the pictures: Various spray and test components Nozzle ring / spray ring Swivel arm accessories Flow meter Connection components Tools / keys Test accessories Documentation and documents Inspection and testing on site is possible and desired after prior appointment. Scope of delivery: Weiss Umwelttechnik SWT 600/800-S Spray Water Test Unit High-pressure unit Turntable / swivel arm Test and spray accessories as shown in the pictures Operating manual / documentation Accessories and components as shown in the pictures Condition: Used Optical condition see pictures Scope of delivery as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale We will be happy to answer any further questions by telephone.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 390 kg, cooling capacity: 9.5 kW (12.92 HP), Coolling water recooler cooling capacity: 6 kW Iodpfxjw D T T Ej Akpstn weight: 110 Kg.

Condition: reconditioned (used), Diosna SP 160 AD Spiral Mixer with 2 bowls - 2 timers, 2 speeds - 160 kg dough capacity - after refurbishment - 2 acid-resistant stainless steel bowls Ijdpow Hm Alsfx Akpstn - perfect condition - possibility of part exchange with another machine

Condition: used, SINGLE Industrial Chiller / Water Cooler / Chiller SINGLE SKA-10-W/STK Cooling capacity 14.0 kW according to the nameplate Year of manufacture 2016 – Industrial chiller with touchscreen control Refrigerant converted to R452A For sale is a used industrial chiller from the manufacturer SINGLE Temperiertechnik GmbH, model SKA-10-W/STK. The chiller is suitable for cooling industrial equipment, machines, production systems, and process circuits. The unit features an integrated controller with a touchscreen interface. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: SKA-10-W/STK Type of equipment: Industrial chiller / Chiller Year of manufacture: 2016 Country of manufacture: Germany Cooling capacity according to the original nameplate: 14.0 kW Permissible temperature range TS according to the nameplate: -30 °C to +20 °C Refrigerant circuit: Current refrigerant according to specifications: R452A Original refrigerant: R507 Original filling quantity according to nameplate: 13.0 kg Current filling quantity after conversion: not confirmed The refrigeration system was converted to the refrigerant R452A. The original refrigerant specifications on the nameplate refer to the delivery condition with R507. The current filling quantity and the CO₂ equivalent must be confirmed separately after the conversion. Pressure specifications according to the original nameplate: Max. operating overpressure PS: 24 bar Setting pressure safety valve: 28 bar Test pressure PT: 27 bar Electrical data: Power connection: 400 V / 3~ / PE / 50 Hz Rated current: 41.7 A Apparent power: 28.8 kVA Control / Operation: Touchscreen interface Display for three temperature control circuits (TCU 1–3) Display of process and temperature data Setpoint and actual value display Supply and return temperature display Flow display Modbus configuration menu Profibus status displays Alarm and operating status display Equipment: Industrial chiller with refrigeration circuit Integrated touchscreen control Electrical main switch Hydraulic connection lines and pipe connections Overflow connection Drain connection with shut-off valve Housing with ventilation openings Closed industrial housing Castors Equipment as shown in the pictures Areas of application: Industrial cooling Process cooling Machine cooling Production systems Machine tools Plastics processing Test bench cooling Temperature control and cooling circuits General industrial cooling applications Dimensions / Transport: Dimensions (L × W × H): not yet determined Unladen weight according to the nameplate: 1,020 kg The exact external dimensions must be determined before shipment. The actual transport weight may vary depending on residual media, accessories, and packaging. Condition: Used Year of manufacture 2016 Refrigerant converted to R452A Optical condition as shown in the pictures Signs of use and some deposits on the connections. Scope of delivery: 1 × SINGLE SKA-10-W/STK industrial chiller Integrated touchscreen control Connections and equipment as shown in the pictures Scope of delivery otherwise as shown in the pictures. Shipping by freight forwarder possible upon request. Subject to change, errors and prior sale. Ijdpfj Aay H Sjx Akpjtn We will gladly answer any further questions by telephone.

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 185 kg, The oil temperature control unit is new and available immediately Medium: Oil Temperature : 300 degrees Ioderazg Uopfx Akpstn Indirect cooling : I2 Heating capacity : 12 KW Weight : 123 KG

Condition: good (used), Year of construction: 2007, Temperature controller, temperature control unit, temperature regulator, modular temperature control unit -Manufacturer: GWK, temperature control unit -Type: teco wd 100.09.15 Ijdpeiyzn Djfx Akpetn -Heating output: 9 kW -Nominal cooling capacity: 100 kW -Technical data: see photo of the nameplate -Number: 3x temperature control unit available -Price: per piece -Dimensions: 1190/320/H745 mm -Weight: 85 kg/pc.

Condition: new, Year of construction: 2025, The POWER UNIT 160 P is an approved clean-air dust extractor in a self-supporting sheet metal construction made from coloured powdered sheet steel. The device conforms to the most recent regulations, is certified with the BG–GS test seal, in accordance with GS-HO-07 (with endorsement for residual dust concentration test seal H3) and, thus, it can be directly installed in the workroom without additional fire or explosion protection measures. Therefore, it provides an ideal production condition with healthy air at the workplace. It is also suitable for use in workshops with a utilization factor of 2-4 machines (dependent on the required volume-flow), as well as to supplement a stationary plant as local extraction for universal application with different materials. The small external dimensions also allow the dust extractor to be installed in confined workshops. Technical data POWER UNIT 160 P : • Intake connection 160 mm • Motor rating 2.2 kW; 3 Ph; 400 V/ 50 Hz • Max. volume-flow 2,000 m³/h • Volume-flow at the connection at 20/ 22 m/s 1,448/ 1,592 m³/h Itedpfx Akefydzbspsn • Vacuum at the connection at 20/ 22 m/s 2,503/ 2,399 Pa • Filter area 9.1 m² (23 x Ø 125 mm, 1000 mm long) • Filter cleaning Compressed air cleaning • Filter material Cat. M, el, white washable • Impact on filter 160 m³/m²/h • Max. noise level 71 dB(A) • Residual dust content H3 / (ᐸ0,1 mg/m³) • Swarf collection volume ca. 165 (241) liter • Basic controls Micro SPS-Logo Siemens without display • Electrical connections 5 m connection cable with CEE plug 5 poles, 16 A, with phase inverter • Compressed air supply ½” standard plug compressed air consumption 108 Std.l/ 6 bear • Volume flow monitoring differential pressure cell with warning lamp on control box • Dimensions (L x W x H) 1,688 x 830 x 2,050 mm • Undercarriage 4 plastic castors 125 mm, two of them steerable, one with locking • Weight 340 kg • Design / Control side choice right / left • Finishing RAL 7001 (silver grey) and RAL 7035 (light grey)

Condition: as good as new (ex-display), Year of construction: 2025, Technical specifications POWER UNIT 160 P: • Intake nozzle diameter: 160 mm • Rated motor power: 2.2 kW; 400 V/50 Hz • Max. volume flow: 2000 m³/h • Rated volume flow: 1448 m³/h • Vacuum: 2503 Pa • Filter area: 9 m² • Filter cleaning: Compressed air cleaning • Collection container (rolling container): 241 liters Iedpfx Aksbpg Itspetn • Dimensions (L x W x H): 1684 x 830 x 2050 • Weight: 288 kg • Design / Operating side, selectable: right / left Location: In stock at warehouse 54634 Bitburg Excellent price for the showroom model.

Condition: used, Year of construction: 2001, machine/vehicle number: 14947/01, Temperature control unit from manufacturer Robamat, used and untested. The unit is intended for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a multi-circuit system with Thermocast 4212 control system. The medium used is oil*, with a maximum supply temperature of 320 °C. Heating capacity is 34 kW*, pump capacity is 75 l/min at 5.0 bar*. Year of manufacture: 2001, total weight: 350 kg. Itjdpfx Ajy Sukujkpjn

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: unexamined, machine/vehicle number: HY-1000LPH, input voltage: 220 V, total height: 2,000 mm, total width: 1,000 mm, total length: 2,300 mm, energy consumption: 4 kWh, Equipment: documentation/manual, Reverse osmosis unit, purchased in 2020, and only tested once in 2024. The machine is being sold as is. Itedpoz Iqrnjfx Akpon

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: 00069, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2016, serial number 00069, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Iodpohgfnbsfx Akpjtn Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 1999, machine/vehicle number: 14490/99, Temperature control unit by Robamat, used and untested. Designed for mold temperature control, injection molding, and industrial process engineering applications. The unit features a dual-circuit system with a Thermocast 4212 control system and two µP103 Mega control units. Operating medium: oil*. Maximum flow temperature: 320 °C. Heating capacity: 2x 34 kW*. Pump output: 75 l/min at 5.0 bar*. Year of manufacture: 1999. Total weight: 350 kg. Itjdoy Surfopfx Akpsn

Condition: used, Benhil Stand Alone Butter Hopper with temperature control outlet with warm water circulation. This machine is used for handling butter or feeding machines with direct feed competitions units. This has twin screw augers with in the hopper and on the outlet there are connections for hot/warm water circulation would you need to regulate the temperature of the product. The throughput is at 2000 kg per hour . The hopper is capable of receiving 25 kg blocks of butter at 8-10 degrees . Capacity: 2000 kg/hr Conditions of sale: “As is” or “Refurbished “ Hopper: Twin Screw Drive: Self driven by motor and belt with reducer Outlet: Double jacket outlet for temperature Control Itedpsz Imn Sjfx Akpjn Location: In stock

Condition: used, functionality: fully functional, There are several Tool-Temp controllers for sale Itedpfjv E Uirox Akpsn

Condition: used, Rexroth Industrial Hydraulic Power Unit, 10 Valves, 100-160 Bar, Used machine Manufacturer: Rexroth Electric motor manufacturer, type: Brook Hansen, WU-DA132SJ Electric power: 5.5 kW (1450 RPM, 380-415V) Condition: Used, industrial execution Overall dimensions: 1100 x 780 x 1380 mm Installation dimensions: 790 x 580 x 380 mm (approx. 170 liters) Itedpfx Ajz Dqxtokpsn Technical and operating parameters: Operating pressure: 100 bar Maximum pressure: 160 bar Valve manifold assembly: 10 pcs Rexroth directional valves (M-R900561278 4WE6E62, EG24N9K4) Hydraulic accumulator: 50 bar pre-charge pressure hydraulic accumulator Valve actuation: 24V DC solenoid operation Design, Operation: Heavy-duty premium Rexroth hydraulic power unit powered by a 5.5 kW Brook Hansen electric motor. Features an integrated manifold block with 10 Rexroth 4WE6 directional control valves and a 50 bar hydraulic accumulator for pressure stabilization and system energy storage. Suitable Application Areas: Hydraulic supply for industrial presses, bending machines, and custom machinery. Multi-actuator hydraulic systems controlling several cylinders or hydraulic motors. Central hydraulic power unit for automated production lines and machine tools.

Condition: used, Container capacity: 75 l Coolant pump, immersion depth: 110 mm 1 fan for each heat exchanger Electrical connection: 380 V Space requirement: 650 x 400 x 900 mm Itjdeckc Upepfx Akpon Weight: 32 kg

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 2310-028, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2013, serial number 2310-028, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Itsdpfx Ajhgg Rrskpen Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 1995, FLUIDPROGRESS mobile hydraulic power supply unit 1.6dm3/min 160bar Type: 25TE1.6 160/JD 24V Year of construction approx. 1995 Nominal operating pressure: 120 bar three section system. Operating pressure: max 160 bar Flow rate: approx. 1.6 dm3/min. Tank capacity: 200 liters Engine power: 0.75 kW Mains connection: 380 volts, 50 Hz Electric hydraulic valve ATOS ORSTA hydraulics Space requirements Length: 1020 mm, width: 610 mm, height: 1000 mm Own weight: approx. 250 kg If you need more information. We are here to help! Please contact us using the contact form or give us a call Iedpfx Akji Dnpxopjtn Your ad has been automatically translated. Translation errors are possible.

Condition: used, CTS Climate testing chamber T-70/600, water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Iodpfsziycbsx Akpotn Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z, refrigerant R23/R404A Control: -Microprocessor-controlled regulation and monitoring system -Simple, user-friendly terminal integrated into the door. -Digital display of setpoint and actual temperature Easy adjustment via +/- buttons -Digital input for temperature in °C -PLC compatible -Up to 100 test programs possible -RS 232 interface -2 free switching channels for on-site test item control Insert rack: Stainless steel, support surface 820 x 710 mm Load per rack max. 35 kg Total load with max. rack capacity 100 kg Refrigeration unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to 10.3 K over time Temperature change rate measured in the center of the test chamber according to DIN 50 011, Part 12 Heating 2.5 K/min Cooling 2 K/min Heat radiation max. 1500 W at +20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test item, without radiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x D x H) External dimensions 1050 x 1850 x 1900 mm (W x D x H) Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current: 10.2 A Protection class IP 22 Condensate drain, unpressurized R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg For your safety as a buyer, the following information! The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Year of construction: 2001, functionality: fully functional, 1,0 St. gebr. Temperiergerät Hersteller: REGLOPLAS Typ: P140/9/SG51/1K/RT45 Itedpfxoxyt Tbe Akpon Baujahr: 2001 Medium: Wasser Temperatur: 140° C Heizleistung: 9 kW

Condition: used, Year of construction: 2001, functionality: fully functional, 1,0 St. gebr. Temperiergerät Hersteller: REGLOPLAS Typ: P140/9/SG51/1K/RT50 Baujahr: 2004 Medium: Wasser Temperatur: 140° C Iedpfxjxyt Tnj Akpetn Heizleistung: 9 kW

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Iedpeu D Dhxefx Akpotn Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: used, Vötsch   Temperature Shock Chamber / 2-Chamber Shock Test System   Vötsch VT³ 7012 S2 Temperature Shock Chamber Warm chamber +50 °C to +220 °C / Cold chamber -80 °C to +70 °C 125 liter test chamber volume – Year of manufacture 2018 – water-cooled version   For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH.   The system is used for performing rapid and shock-like temperature changes and is particularly suitable for environmental simulation, Environmental Stress Screening (ESS), quality assurance, as well as stress and reliability tests of electronic components, assemblies, and other test specimens.   The VT³ 7012 S2 operates according to the 2-chamber principle with a warm and cold chamber. The test specimen is transported between the two temperature zones in a vertically moving test carriage and is thus subjected to rapid temperature changes.   Technical data:   Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Device type: Temperature shock chamber / 2-chamber shock test system Year of manufacture: 2018 Made in Germany   Test chamber volume: 125 liters Number of chambers: 2 Temperature range warm chamber: +50 °C to +220 °C Temperature range cold chamber: -80 °C to +70 °C Max. test weight / test carriage load: 50 kg Refrigeration unit: water-cooled   Refrigerant 1: R449A Refrigerant quantity: 1.70 kg GWP: 1,397 CO₂ equivalent: 2.37 t Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g   Refrigerant 2: R23 Refrigerant quantity: 1.27 kg GWP: 14,800 CO₂ equivalent: 18.80 t Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Operating pressure: 14 bar g   Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A   Test chamber dimensions (W × D × H): 470 × 650 × 410 mm External dimensions (W × D × H): 970 × 2,350 × 1,985 mm Required room height for operation: approx. 2,450 mm Weight: approx. 1000 kg   Equipment:   2-chamber temperature shock system Vertically moving test carriage Programmable touch panel control CONTROLPAD for status display Temperature control Test chamber lighting Observation window Pipe connection Water-cooled refrigeration unit Automated and programmable defrost cycles Operating hour counter Cycle counter / remaining runtime display USB and Ethernet interfaces   Areas of application:   Temperature shock testing Environmental Stress Screening (ESS) Environmental simulation Electronics and component testing Assembly testing Material testing Quality assurance Research and development Reliability testing Lifetime and stress tests   Condition:   Used Optical condition as shown in the pictures   Scope of delivery:   1x Vötsch VT³ 7012 S2 Temperature shock chamber Touch panel control Equipment and accessories as shown in the pictures   Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components Itedpfjzzazuex Akpon 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   Shipping by freight forwarder is possible. Subject to change, errors and prior sale.   We will be happy to answer any further questions by telephone.