Used Synaccess Power Adapter for sale (41,657)

Condition: reconditioned (used), Year of construction: 2015, operating hours: 30,143 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), year of last overhaul: 2025, volume flow: 800 m³/h, Technical data baler: Njdpfxszdny Rs Acmolc Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Available quantity: 6 units Removed from a production facility of an automotive supplier, professionally disassembled. Siemens POWER MODULE SINAMICS G120D PM250D Njdpszggt Isfx Acmjlc 6SL3525-0PE23-0AA1 Version: FS:C02 including Siemens SINAMICS G120D Control Unit CU240D 6SL3544-0FB20-1FA0 Version: B01 / V4.7

Condition: used, functionality: fully functional, Available quantity: 5 units “functionally tested; item originates from the dismantling of equipment from an automotive supplier” Manufacturer: Siemens Type: SINAMICS G120D Power Module PM250D 6SL3525-0PE23-0AA1 Power: 3 kW, 3-phase, 380–500 V AC Rated current: 7.2 A, Max. 15.4 A Protection class: IP65 Special features: Regenerative braking capability (4-quadrant operation), integrated network filter Class A Weight: approx. 8 kg Nodpfx Ajzgf I Rjcmolc including CONTROL UNIT 6SL3544-0FB20-1FA0

Condition: used, functionality: fully functional, more than 10 available “functionally tested; item originates from the dismantling of equipment from an automotive supplier” Manufacturer: Siemens Type: SINAMICS G120D Power Module PM250D (6SL3525-0PE17-5AA1) Power: 0.75 kW, 3-phase, 380–500 V AC Rated current: 2.2 A, max. 4.4 A Nlsdpfxozgf Iwj Acmoc Degree of protection: IP65 (without control unit) Special features: Integrated Class A network filter, capable of energy feedback, high overload capacity (200% for 3 s, 150% for 60 s, 100% for 300 s) Weight: approx. 5.7 kg including Control Unit 6SL3544-0FB20-1FA0

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Hydraulic power unit: with hydraulic reservoir and valves -Hydraulic pump: Pressure up to 150 bar -Flow rate: 4 l/min -Motor: -Individual components: see photos Nlsdpfozfgrhex Acmsc -Dimensions: 380/220/H450 mm -Weight: 28.7 kg

Condition: good (used), RMS RMS vibration exciter with power amplifier and cooling fan. Vibration exciter SW 1511/2 Nodpfjzdry Uox Acmslc Power amplifier TGD 3000-000 00 Input: 3x400V-50Hz, 14.5 kVA Cooling fan SWG 108 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm Nsdpfxoy Nuf Tj Acmelc - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Condition: as good as new (ex-display), Adapter version for Variolock Variolock diameter: 80 mm Nljdpfx Aob Tywrecmec Length: 220 mm Diameter: 140 mm Article number: 3441068146 3S 45812

Condition: used, Diameter of centering pin: 60 mm Diameter of bolt circle, 4 inches: 102 mm 4 threads, MK 16 Mounting surface: 128 mm Nedpfx Acjb Tyrvemelc Diameter of variable hole: 80 mm

Condition: used, Diameter 48 mm Bilz threaded adapter Diameter 63 mm Variolock connection Length 160 mm Nlodsb Tyqpepfx Acmjc Overall length 180 mm 2 pieces available

Condition: good (used), pneumatic power chuck Manufacturer: Forkardt Type: UVE 200 - 50 - J5 KKG 5 Bolt circle diameter: 105 mm Taper: 80 mm Overall diameter: 280 mm Nledpfx Acsdm Htpemec Diameter of hollow spindle: 50 mm Overall height with jaws: 200 mm Weight: 47.5 kg

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 10019824, cutting speed: 110,000 mm/min, cutting range round steel at 90°: 320 mm, overall weight: 1,600 kg, saw band length: 5,300 mm, TECHNICAL DETAILS Cutting capacity for round steel at 90°: 320 mm Cutting capacity for flat steel at 90°: 520 x 320 mm Smallest dimension for cutting (round): 10 mm Smallest dimension for cutting (flat): 10 x 8 mm Cutting speed: 15 - 110 m/min Saw blade dimensions: 5,300 x 34 x 1.1 mm Shortest remaining material length: 40 mm MACHINE DETAILS Drive power: 2.6 kW Total drive power: 3.7 kW Dimensions & Weight Installation dimensions (L x W x H): 3,100 x 1,100 x 2,200 mm Weight: 1,600 kg Njdpozdi U Nofx Acmjlc EQUIPMENT Available manuals Numerous saw blades

Condition: like new (used), Various EATON contactors and motor protection relays in stock. 8 units of protection relay ZB32-10 / EAN No. 4015082784515 2 units of contactor DILM32-10 / EAN No. 4015082772604 4 units of contactor DILM25-10 / EAN No. 4015082771324 1 unit of contactor DILM50 / EAN No. 4015082778361 1 unit of contactor DILM40 / EAN No. 4015082777746 Nodpfx Aozg Htbscmelc

Condition: used, Year of construction: 2015, Year of manufacture: 2015 Technical condition: good Please contact Vitali Lenda for further information. Nlsdpezd E Dasfx Acmec

Condition: refurbished (used), Refurbished by a service partner Nlsdpfx Ajzd N E Ujcmoc Siemens SIMODRIVE 611 Power Module 400A 6SN1123-1AA00-0KA0 Manufacturer: Siemens Series: SIMODRIVE 611 Type: Power Module Design: 1-axis module Rated current: 400 A Part number: 6SN1123-1AA00-0KA0 Serial number: T-K22036996 Condition: Refurbished spare part Date of manufacture: 05.09.2013 Origin: Germany Packaging: Original box

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 80 t, stroke length: 60 mm, Power: 80 Ton Table size: 680 x 540 mm Strokes per minute: 60/min. Stroke: 60 mm Throat depth: 275 mm Nljdpfx Aozbvvvecmoc Gap in bed: 150 mm Controll: 2- hand controller Country of origin: Netherlands Motor power: 4 kW Machine (L×W×H): 175 x 100 x 235 cm Machine weight: 3700 kg

Condition: used, Used power measurement module for integration into industrial laser systems. The device is used for power monitoring and process control in laser applications and features a PROFINET interface for integration into automation systems. Manufacturer: PRIMES Nsdpfszdnixox Acmslc Device Type: Power Measuring Module Model: PMM PROFINET Condition: used Year of Manufacture: 2017 Communication Interface: PROFINET PROFINET Revision: 2.3 GSDML Version: V2.3 Device Identifier: PRIMES-PMM-PN-Cu-20140815 Type Identifier: Cu-20140815 2 x RJ45 Ethernet port COM interface External voltage connection Status display: Link Tx/Rx Calibration service sticker present Version for copper interface Location: Kusel Quantity: 6 units available

Condition: like new (used), functionality: fully functional, machine/vehicle number: 115090324_x, KITAGAWA POWER CHUCK e.g. OKUMA, MAZAK, MORI Three-jaw chuck with serration. cylindrical holder for spindle flange Spindle mounting flange in scope of delivery KK6 Drawtube connection thread M60x2,0mm currently under investigation Jaw interface: 1.5 x 60 ° Weight without clamping jaws approx. 30 kg Njdpfezf Hnvjx Acmolc For further inquiries, we are at your disposal. Shipping costs on request

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, CNC Universal 5-Axis Tool-and Cutter Grinder CNC Control HMC 400 CNC X-axis movement 400 mm Nlsdpfx Acezavqwemec Y-axis movement 250 mm Z-axis movement 580 mm C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS CHP unit price includes dismantling and loading onto your trucks. Year: 2010 Nlodpfxswd Nw Te Acmoc Power: 1064 KW Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.

Condition: used, Year of construction: 2008, operating hours: 110 h, functionality: fully functional, power: 834 kW (1,133.92 HP), fuel type: gas, Jenbacher J316 Bio Gas generator containerized set - Manufacturer: Jenbacher - Model: J316 - Hours 110k - Year of Manufacture: 2008 - Rated Output Power: 834 kW - Frequency: 50 Hz - Alternator: Stamford New alt installed 2017 Nledpfx Aoy S Ttbocmec -XT4 New turbo installed 2k hours ago. Contact for more info.

Condition: ready for operation (used), AGIE PMO-03 Power Module, Output 616021.2, Serial No. as shown in the photo, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nodpfx Acji D Txiomolc

Condition: ready for operation (used), Bosch NT 600 power supply, serial number as shown in the photo, used, minor signs of wear, 100% functional. Nodpfxei D Uars Acmelc

Condition: ready for operation (used), Contraves PS 700 DC power supply, used, in good condition, 100% functional. Njdpsi D Umhefx Acmjlc

Condition: ready for operation (used), Okuma DC-S1A DC power supply for 4 axes, CZ-270C, serial number as shown in the photo, used, with normal signs of wear, 100% functional. Nsdoi Ecanspfx Acmolc