Used Strip And Wire Forming Machine for sale (72,672)

Condition: good (used), Year of construction: 1992, functionality: fully functional, Manufacturer: BOSCH Tip: SVZ 2500 A Maximum bag length: 400 mm Ncodjrrv T Iepfx Agqjw Minimum bag length: 100 mm Maximum bag width: 250 mm Minimum bag width: 90 mm Maximum output: 80 bags/min

Condition: repair required (used), Manufacturer: FANUC Type: A04B-0221-B201 The condition of the machine is unknown; it is not functioning. It is being sold in its current condition. !! We do not know what the problem is! Nsdpfx Ajik Hb Tegqocw

Condition: new, Year of construction: 2026, functionality: fully functional, operating pressure: 6 bar, inner dimension width: 600 mm, inner dimension height: 400 mm, volume flow: 10,500 m³/h, Equipment: documentation/manual, New Wire Mesh Belt Shot Blasting Machine RB-600 AH 4 Description: The RB-600 AH 4 wire mesh belt shot blasting machine from ABRAZIV Kft. is designed for the economical and continuous surface treatment of small to medium-sized workpieces. The machine is suitable for descaling, derusting, cleaning, and surface preparation of aluminum and steel castings, forgings, and workpieces that cannot be shot blasted in bulk. The machine is manufactured to order and can be configured individually according to customer requirements. The RB-600 AH 4 is equipped with four ABR-380 shot blasting turbines. Two turbines are located above and two below the wire mesh conveyor belt. This arrangement ensures optimal coverage of the cross-section and a uniform blasting result. The turbines operate at an angle of approximately 70° to the direction of travel and have eight blasting blades and a pre-accelerator. The active blasting area is lined with highly wear-resistant manganese steel. Other internal areas are protected by wear-resistant, noise-reducing rubber. The wire mesh belt is made of highly wear-resistant spring steel. A closed blasting media circuit with a screw conveyor, bucket elevator, blasting media cleaning system, and dosing system ensures reliable operation. Three-layer rubber curtains reduce blasting media leakage. An adjustable high-pressure blow-off system cleans the workpieces after the blasting process. The extraction and filter system with cartridge filters achieves a dust emission of max. 3 mg/m³. Technical Data Passage Passage width: 600 mm Max. workpiece height: 400 mm Min. workpiece length: approx. 1,000 mm Shot Blasting Turbines Number: 4 Type: ABR-380 Turbine diameter: 380 mm Speed: 2,800 1/min Blasting media output per turbine: 120 kg/min Wire Mesh Conveyor Belt Load capacity: 500 kg/m Speed: 0–4 m/min Power Consumption Base machine: 45.5 kW Cartridge filter: 7.5 kW Compressed air: min. 6 bar Compressed air consumption filter: 12.5 m³/h Other Data Blasting media capacity: approx. 1,000 kg Blasting media grain size: 0.4–1.2 mm Extraction capacity: 10,500 m³/h Filter area: 252 m² Dust emission: max. 3 mg/m³ Electrical Data Mains voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optional accessories available Magnetic drum separator Frequency converter Automatic blasting media dosing Special paint finish Transport Assembly Commissioning Operator training Spare parts supply Maintenance and service Applications Aluminum and steel castings Forgings Small steel components Single and series components Descaling Derusting Cleaning Surface preparation Location / Production Nedpfozkivtjx Agqscw Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we produce shot blasting machines individually according to customer requirements. Other sizes and special designs are available. We will be happy to provide you with a non-binding offer. Price on request

Condition: good (used), Year of construction: 2002, functionality: fully functional, Manufacturer: PFM Model: Zenith Inox Year: 2002 Output: approx. 50 pcs/min Electrical power: 4.5 kW Weight: 680 kg Ncodpfexapzzex Agqjw Optional: Piston filler with heated tank for processed cheese Condition: good, fully functional

Condition: used, Year of construction: 2009, Production: • Bag type: Bottom seal bags • Suitable products: o Garbage bags o Fruit and vegetable bags o Various types of plastic bags Materials: • Processable materials: Ncedpfx Agozk H E Seqow o LDPE o HDPE o MDPE Technical Specifications: • Maximum sealing width (bag width): 1200 mm • Bag length (draw length): 150–3400 mm • Number of lanes: 1 • Maximum linear speed: 150 m/min • Maximum production speed: Up to 50 bags/min Control System: • PLC controlled • Operator interface terminal (HMI) • Print registration control • Servo-driven sealing bar Equipment: • Unwind unit • Photocell • Anti-static bars

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Wire EDM machine type Agiecut Classic 2s, year of manufacture 2004, for sale. The machine is in good condition and operates flawlessly. An inspection under power is gladly possible. A video is also available upon request. Ncsdpfxoy Snm No Agqjw Technical machine data: Agiecut Classic 2S • Manufacturer: AGIE SA, CH-6616 Losone (Made in Switzerland) • Model / Type: AGIECUT CLASSIC 2S • Year of manufacture: 2004 (with CE marking) • Serial number (unit): 663 • Equipment list No.: C32.102 • Circuit diagram No.: 629.412 Electrical connection values & performance • Voltage: 3 x 400 V • Frequency: 50 Hz • Power: 9 kVA • Rated current: 14 A • Short-circuit current: 10K Weight & components • Total weight: 2,580 kg • Subcomponents (serial numbers): o MC 2S CLASSIC (unit): Serial 663 / Equipment List 002.354 o DA CLASSIC 2S: Serial 659 / Equipment List 033.804 o CABINET CLASSIC 2S (control cabinet): Serial 665 / Equipment List 028.254 Loading can be arranged by us upon agreement. If you have any questions, please feel free to contact us at any time.

Condition: refurbished (used), Year of construction: 2020, operating hours: 455 h, functionality: fully functional, machine/vehicle number: 1222275, warranty duration: 6 months, total height: 2,085 mm, total width: 1,225 mm, total length: 6,109 mm, type of input current: three-phase, overall weight: 1,570 kg, film width: 700 mm, compressed air connection: 6 bar, input voltage: 400 V, working height: 870 mm, year of last overhaul: 2026, input current: 14 A, Equipment: documentation/manual, safety light barrier, SALES ONLY WITHIN GERMANY AND AUSTRIA!!! The ULMA FM 300 automatic flow-pack machine was specifically developed to package fresh products in multi-layer films under a modified atmosphere (MAP). This machine produces hermetically sealed "pillow-pack" flow packs in a pillow format. Ulma FM 30 The ULMA FM 300 automatic flow-pack machine was specifically developed to package fresh products in multi-layer films under a modified atmosphere (MAP). This machine produces hermetically sealed "pillow-pack" flow packs in a pillow format. Technical Specifications Model: FM 300 Condition: Overhauled 2026 (fully functional) Year of Manufacture: 2020 Performance: Up to 80 packs/minute (depending on film and product characteristics) with MAP. Packaging Type: Flow pack Machine Equipment Infeed conveyor length: Free infeed section 2135 mm Equipment Features ✅ Wash-down infeed conveyor in hygienic design ✅ Motorized film roll holder (max. film width 700mm) ✅ Photo cell for printed film ❌ Label dispenser ❌ Printer ✅ Signal for printer / labeler ❌ Double film roll holder Ncodpfjzkry Uex Agqsw ✅ Motorized film roll holder (max. film width 700mm) ✅ Stainless steel cross-sealing bar with double tooth for mono films ✅ Squeeze sponge for controlling the package volume ✅ "No Product / No Pack" function ✅ Synchronization signals for upstream and downstream equipment ✅ Gas analyzer Dannsensor MAP Check 3 O2 & CO2 gas saver Documentation & Operation Language (Documentation & HMI): German (other languages available upon request) Dimensions & Weight External dimensions (L × W × H): 6,109 × 1,225 × 2,085 mm Shipping weight: 1570 kg (including shipping packaging)

Condition: new, Year of construction: 2024, operating hours: 46 h, functionality: fully functional, machine/vehicle number: 143810, warranty duration: 12 months, total height: 1,715 mm, total width: 1,250 mm, total length: 5,405 mm, type of input current: three-phase, overall weight: 989 kg, film width: 700 mm, compressed air connection: 6 bar, working height: 870 mm, input current: 8 A, conveyor belt length: 2,500 mm, conveyor belt width: 300 mm, Equipment: documentation/manual, SALES ONLY WITHIN GERMANY AND AUSTRIA!!! Ulma FR 200 The electronic, automatic flow-pack machine, model ULMA FR 200, has been specially developed to package a variety of different products in flat pouches (flow-pack) or pillow packs. Technical specifications Model: FR 200 Condition: New (fully functional) Year of manufacture: 2024 Performance: Up to 100 packs/minute (depending on film and product characteristics). Type of packaging: Flow-pack Machine equipment Length of infeed conveyor: Free infeed section 2500 mm Equipment features ✅ Photo cell for printed film ❌ Label dispenser ❌ Printer ✅ Signal for printer / labeler ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 700mm) ✅ Cross sealing, except for tall products (max. 160mm), sealing bar width 300mm ✅ Support system for heavy trays via cross sealing ✅ Function: No product / No bag Documentation & Operation Language (documentation & HMI): German (other languages upon request) Dimensions & Weight External dimensions (L × W × H): 5,405 × 1,225 × 1,715 mm Nsdpfjzkqvbsx Agqocw Shipping weight: 989 kg (including shipping packaging)

Condition: excellent (used), Year of construction: 2020, operating hours: 13,800 h, functionality: fully functional, workpiece weight (max.): 5,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, total height: 2,740 mm, total length: 3,600 mm, total width: 3,900 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 595 mm, workpiece width (max.): 1,330 mm, workpiece length (max.): 990 mm, overall weight: 8,500 kg, For sale is a demonstration unit: Accutex AU860iA Max. workpiece size (L x W x H, mm): 1330 x 990 x 395 Max. workpiece weight (kg): 5,000 X/Y/Z travel (mm): 800 x 600 x 400 (optional Z600) U/V travel (mm): 150 x 150 Wire spool weight (kg): 16 Nodsxnx Itopfx Agqjcw Machine dimensions (W x D x H, mm): 3900 x 3600 x 2740 Machine weight (kg): 8,400 Water system capacity (l): Main tank: 2420 (Z400); Side + Main tank: 1630+1280 (Z600)

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 8,400 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, overall weight: 3,700 kg, A demonstration machine is for sale. Travel range: X-axis: 600 mm Y-axis: 400 mm Z-axis: 300 mm U-axis: ±50 mm V-axis: ±50 mm Max. workpiece dimensions: 990 x 620 x 295 mm Max. table load: 550 kg Max. taper: ±21º / 100 mm Machine weight: 3700 kg Machine height: 2210 mm Machine dimensions: 2480 x 2980 mm Standard wire diameter: 0.15 to 0.3 mm Max. weight of wire spool (kg): 10 kg (P10) Surface quality: Ra 0.35 Capacity of the water system (l): 1000 Machine equipment: Transformer Windows CE touch screen controller Automatic wire threading (AWT) SD Master Tubular linear drive Collision protection X/Y/Z/U/V axes 0.1-μm resolution in the linear scale PC acrylic filter tank cover Standard remote box Water chiller Flush gun Protective door lock 3-filter water tank design CE conformity configuration Ncjdpfx Aeza Eppogqjw Demineralized water tank

Condition: good (used), functionality: fully functional, total length: 690 mm, total width: 1,380 mm, total height: 1,620 mm, overall weight: 540 kg, type of input current: three-phase, input voltage: 400 V, power: 1 kW (1.36 HP), funnel diameter: 380 mm, DGUV certified until: 08/2027, ambient temperature (max.): 40 °C, Rheon Model KN100 Cornucopia Encruster Nedpforhvu Asx Agqscw Maximum speed of approximately 60 pieces per minute, depending on the product. Weight capacity of 10 - 90 grams. Large stainless steel hopper Each with (2) feed screws Wide discharge conveyor Digital touch control. Compact shaping, filling, and portioning machine Machine is mobile Connection: 400V, 16A CEE plug Used machine Delivery service available. More bakery machines in stock!

Condition: excellent (used), Year of construction: 2004, WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER WIRE BELT BLAST MACHINE BRAND: RÖSLER Manufacturer: Rösler Type: RDGE 800-4 Year of manufacture: 2004 Passage width: 800mm Passage height: 550mm Spinning wheel: 4 pieces with frequency converter, Filter system: wet filter system With several inlet and outlet belts. Incl., control cabinet, complete documentation, etc. TOP condition! Ncedpev Idf Isfx Agqew System is dismantled! WIRE BELT BLAST MACHINE BRAND : RÖSLER Brand: Rösler Type: RDGE 800-4 Year: 2004 Belt Width : 800mm Inlethigh: 550mm Turbine: 4 Pieces with Drivers Filter: Wet Filter With many inlet- and outlet transport belt Incld. Main Panel, complete Doku Very good condition! Machine it s now desmantly Price: Loading on Truck Price: Loading on Truck Warranty: 6-month function and warranty guarantee when commissioned by DECK Sarl. Spare parts supply for the next 10 years Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly OPTIONAL: Delivery to your factory: Assembly / commissioning / training Assembly by foreman We also offer spare parts for Rösler, Schlick, Wheelabrator, Gietart etc. blasting machines! We can offert for spare parts for Rösler, Shot Blasting Machines!

Condition: new, Year of construction: 2025, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 1223785, warranty duration: 12 months, total height: 1,960 mm, total width: 1,395 mm, total length: 6,165 mm, type of input current: three-phase, overall weight: 1,300 kg, film width: 1,000 mm, compressed air connection: 6 bar, input voltage: 400 V, working height: 780 mm, input current: 17 A, conveyor belt length: 2,855 mm, conveyor belt width: 300 mm, Equipment: documentation/manual, safety light barrier, SALES ONLY WITHIN GERMANY AND AUSTRIA!!! Ulma Sienna LS BI The Ulma Sienna LS bag-in-film machine is designed for packaging loose, difficult-to-handle, delicate, and wet products. This machine is suitable for fruits and vegetables, bakery products, and non-food products. The output, depending on the product, is up to 80 pieces per minute. Technical Specifications – SIENNA LS BI Model: SIENNA LS BI Nodjzkhnhjpfx Agqecw Condition: New (fully functional) Year of Construction: 2025 Performance: Up to 80 packages/minute (depending on film and product properties) Packaging Type: Flow-pack Machine Equipment Length of infeed conveyor: Free infeed section 2,855 mm Cross-sealing system: Box Motion Width of cross-sealing: 400 mm Position of sealing rollers: Top Maximum film width: 1,000 mm Equipment Features ✅ Photo cell for printed film ❌ Label dispenser ❌ Printer ✅ Product length sensor ❌ Double film roll holder ✅ Suitable for packaging with trays ✅ Suitable for packaging without trays Documentation & Operation Language (documentation & HMI): German (other languages available upon request) Dimensions & Weight External dimensions (L × W × H): 6,165 × 1,660 × 1,960 mm Shipping weight: 1,300 kg (including transport packaging)

Condition: excellent (used), For sale is a professional wire cutting machine, the AAT Microfil, from the renowned German manufacturer Aston Abisolier Technik GmbH, Nuremberg. This device is designed for precise cutting of wires and cables to a specified length. Thanks to its adjustable feed speed and piece counter, it is ideal for use in electrical workshops, production facilities, and for the manufacture of cable harnesses. The manufacturer has specialized in wire processing equipment for many years. Technical data: Manufacturer: Aston Abisolier Technik GmbH (AAT) Model: Microfil Country of manufacture: Germany Power supply: 220 V / 50 Hz Motor power: 90 W Drive with stepless speed control (Minidrive) Speed range: approx. 15–135 rpm Cutting length adjustment Length adjustment range on the panel: approx. 40–7200 mm Cut counter Stable, metal construction Applications: Ncjdpfx Agozkb T Roqjw cutting electrical wires, cutting single- and multi-strand cables, preparing wires for further processing, cable harness production, electrical and electronics workshops. Condition: Used device, in good visual condition. It has normal signs of wear resulting from use. When connected to the power supply, the indicator light illuminates, and the machine starts. Sold in the exact condition as shown in the photos. Included in the set: AAT Microfil machine, power cord.

Condition: used, Year of construction: 2001, functionality: fully functional, For sale is a vertical form, fill, and seal machine from Rovema. With two shoulders, maximum bag size 35 cm wide. Running. Nodjv Saugjpfx Agqocw Dimensions of the packaging machine: Approx. Width 1.30 m Height 2.15 m Length 2.70 m Weight: 1,000 kg

Year of construction: 1978, condition: ready for operation (used), A roll forming line by Instytut Obróbki Plastycznej (Poland) for plastic metal forming is available. Roll stations: 12, shaft diameter: 50mm, max. profile width: 300mm, max. profile thickness: 2mm, overall system dimensions X/Y: approx. 20m/4m. Including an automatic cut-off unit with an incremental length measuring system and a payoff reel. An on-site inspection is possible. Ncodpfozhw Swsx Agqow

Condition: excellent (used), Year of construction: 2019, operating hours: 1,417 h, functionality: fully functional, machine/vehicle number: 190.315, BRIMATO: Automation for Cutlery. Sorting and hygienic packaging of cutlery, automated addition of other items such as salt, pepper, toothpicks, or napkins, precise cutlery counting, detection and sorting of different types of cutlery—whether metal or plastic—are the challenges we solve and have already successfully implemented. The process reliability and durability of our cutlery automation technology ensure a fast return on investment (ROI) and reductions in personnel costs. With BRIMATO automation, hygiene is sustainably optimized all the way to the end user. BRIMATO’s cutlery automation solutions are designed for hospitals, event caterers, large canteens, student unions/cafeterias, and inflight caterers. Nedpfxjxxan Ne Agqjcw

Condition: good (used), functionality: fully functional, total length: 400 mm, total width: 430 mm, total height: 380 mm, overall weight: 49 kg, type of input current: AC, input voltage: 230 V, year of last overhaul: 2024, product length (max.): 75 mm, power: 3 kW (4.08 HP), product length (min.): 75 mm, working width: 400 mm, DGUV certified until: 07/2027, ambient temperature (min.): 20 °C, ambient temperature (max.): 40 °C, TOP Vario baking unit for 13 tartlets Stainless steel countertop unit Temperature adjustable up to 300°C Njdjuat Abepfx Agqecw +++ robust technology +++ Connection: 230V Dimensions: 430 x 400 x 380 mm (W x D x H) Used unit More bakery machines in stock!

Condition: good (used), Dumor Lightning Fold Pro 8335B+33KF Automatic Creasing and Folding Machine The machine is fully operational and ready to use. Manufactured in 2018. This is the most efficient creasing and folding system on the market, with a robust construction. High-stack vacuum feeding. Built-in vacuum and suction systems. An instruction manual is included. The 7-inch color Smart Screen programmer allows for easy machine setup. Technical specifications: Paper thickness: 0.15-0.35 mm Feeder capacity: 100 mm Accuracy: +/- 0.5 mm Format range: 140×160 mm, 330×650 mm Paper type: coated, uncoated, laminated, UV varnished, photo Creasing blade width: 1.0 mm, 0.6 mm, and 1.4 mm Speed: 6300 sheets/hour (A4/1 fold) Number of creasing strokes per pass: up to 32 (creasing-only mode) Control: dual 7-inch touchscreen Predefined fold types: 7 types + custom folds Number of folds: 1 or 2 Folding method: folding knife Automatic paper length measurement: YES High-performance upper suction feeder: YES Patented breaker knife system: YES Creasing depth adjustment: YES Weight: 280 kg, Ncedpfszlgcmjx Agqsw

Condition: used, Year of construction: 2008, functionality: unexamined, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, For sale: a Mitsubishi FA30S wire erosion machine. Travel ranges (X, Y, Z): 750 × 500 × 410 mm Max. workpiece dimensions: Up to 1300 × 1000 × 405 mm Max. workpiece weight: Up to 3000 kg The machine has a Z-axis extension, allowing cutting up to 600 mm. Original price in 2008: 238,259.00 Nsdpfx Ajziw Saegqjcw Loading with a forklift is possible.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, AGIECUT Classic 2S Year of manufacture: 2004 Travel distances: X = 350 mm, Y = 250 mm, Z = 256 mm Travel distances U/V axis: +/- 70 mm Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 (in the bath) / 450 (without the bath) kg Achievable surface quality: Ra: 0.20 µm Maximum cutting rate: 300 mm²/min Nsdpfszcaxkox Agqscw Available wire diameters: 0.20 – 0.33 mm Wire EDM machine with automatic wire threading and re-threading after wire breakage With manual front door (accessible from one side) Includes AGIEJOGGER handbox for convenient setup AGIE IPG generator AGIEVISION control Dimensions (length x width x height): 1640 x 2040 x 2220 mm Net weight: 2580 kg After receiving your order, our machines are cleaned and fully overhauled. Subsequently, a test cut is performed to achieve the best possible surface finish for acceptance. You will receive a 6-month warranty on the machine. We would be happy to offer on-site commissioning and training.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 650 mm, workpiece length (max.): 1,050 mm, GF AgieCharmilles Vertex 3F, Year of manufacture: 2007 Travel ranges: X = 500 mm, Y = 350 mm, Z = 256 mm Travel ranges U/V axis: +/- 70 mm Ncsdozcap Ajpfx Agqow Maximum taper: 30° at a height of 100 mm Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.05 µm Available wire diameters: 0.03 – 0.33 mm (including fine wire module) Wire EDM machine with automatic wire threading With automatically lowerable tank (accessible from 2 sides) Including AGIEJOGGER handheld control unit for convenient setup Including AGIESETUP 3D AGIEVISION 5 control system AGIE IPG-V generator Dimensions (length x width x height): 2800 x 2400 x 2220 mm Net weight: 4500 kg After receiving your order, we will clean, overhaul, and thoroughly test the machine. You will receive a 6-month warranty on this! Includes user training at Techma on your overhauled machine. Optionally, we can also offer you the following services: - Transport - Commissioning - Training - Cooler

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 220 mm, total height: 2,015 mm, total length: 2,435 mm, total width: 2,203 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 215 mm, workpiece width (max.): 725 mm, workpiece length (max.): 600 mm, overall weight: 2,850 kg, warranty duration: 12 months, The Kmway EK-Series Wire EDM machine has been developed for users who value accuracy, efficiency, and long-term reliability. Thanks to its compact design, advanced wire threading technology, and robust, thermally balanced construction, it offers the perfect combination of precision and practical application. Ncedpfxey Rk H Nj Agqsw Why choose the EK-Series? – Next-generation Automatic Wire Threading (AWT): Highly reliable threading system that operates with or without flushing, increases machine uptime, and reduces operator intervention. – Linear Motor Drive: Friction- and backlash-free motion improves long-term cutting accuracy and reduces mechanical wear compared to conventional ball screw drives. – Extremely Rigid One-Piece Frame: Thermally balanced and designed for stability – ensures dimensional accuracy even during long or high-load machining cycles. – Small Footprint, High Performance: Compact design with integrated generator and filtration system, ideal for confined workshop spaces without compromising on performance. – Advanced Filtration System: The improved design allows for a 3 to 5 times longer filter life than conventional systems and enables quick and easy replacement when needed, minimizing downtime. – Operator-friendly Head Design The upper and lower heads are optimized for easy maintenance access, ensuring consistently high output quality with less effort. With decades of experience in the field of electrical discharge machining (EDM), Kmway provides energy-efficient, high-precision solutions that are appreciated worldwide. Technical Specifications: Axis Travel (X, Y, Z) mm: 400 x 300 x 220 Axis Travel (U, V) mm: 60 x 60 Maximum Workpiece Size (W, D, H) mm: 725 x 600 x 215 Maximum Workpiece Weight kg: 350 Axis Drive System: Linear Motor for X and Y axes U + V + Z: AC Servo Motors X-Y Axis Traverse Speed mm/min: 1800 Wire Diameter mm: Ø 0.15–0.3 (Standard 0.25) Maximum Taper Angle: ±14.5°/80 mm Machine Weight kg: 2850 Machine Dimensions (W x H x D) mm: 2203 x 2015 x 2435

Condition: good (used), Heiber Schröder CE Speedformer Tray forming machine Single-track machine, manufactured by Heiber & Schröder, Germany. Nodpfx Agjzlafheqecw Year of production: 2022. Description: The machine can produce packaging such as trays, trays with lids, leak-proof trays (sealed – lined with PE foil), clam-shell (hamburger), French fries (fries), Chinese food (conical), and more. Includes documentation, tools, accessories, and a cold glue system.

Condition: good (used), Heiber Schröder CE 1000-2 Tray forming machine Two-lane machine, manufactured by Heiber & Schröder, Germany. Manufactured in 2011. Description: Ncjdpfozlad Dsx Agqsw The machine can produce packaging such as trays, trays with lids, leak-proof trays (sealed – lined with PE film on the inside), clam-shell (hamburger), French fries (fries), Chinese food (conical), and more. Includes documentation, tools, accessories, and a Nordson hot and cold glue system.