Used Reinecker Wzs 60 for sale (21,766)

Condition: excellent (used), Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Revolver-adjustment: 12-positions Mandrellength: 4500 mm Sets of bendingdies: - Ø 22 mm - Ø 25 mm - Ø 48 mm Featured with: - 3 Mandrels Lsdjn Smq Ijpfx Abyeru - Mandrel retraction unit - Footpedal - Bendingspeed controller Country of origin: The Netherlands Motor power: 7,5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 480 mm 610 x 450 saw band length 5320 x 34 x 1,1 mm Lsdefu Nbbepfx Abysru band speed 15 - 100 m/min table height 820 mm total power requirement 3,0 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2,65 x 2,8 x 2,2 m For miter cuts up to 45° left in fully automatic Operation and up to 60° left in semi-automatic operation Material height sensor (automatic cut start detection) Automatic feed unit via ball screw with incremental feed automatic length compensation Button on the saw band for automatic adjustment of the saw stroke Fully automatic control of the saw frame and clamping device Hydraulic unit with automatic pressure shut-off when idling Mechanical chip clearing brush feed vice opening on both sides Remaining piece length 100 mm Modern CNC control freely programmable for multiple sawing jobs with various Cutting lengths and quantities. Automatic feed unit 500 mm via ball screw incremental feed with automatic length compensation. Adjustable for section lengths of 25 – 9,999mm. Fully hydraulic control of saw frames and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. Lrodpfx Abjd Sg Hcsyou control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Condition: used, functionality: unexamined, machine/vehicle number: 516043004056, Year of construction: 2004, operating hours: 5,813 h, Electric four-wheel forklift Still R 60-25, manufactured in 2004, load capacity 2,500 kg. Factory number 516043004056, unladen weight 2,879 kg, permissible total weight 7,405 kg, rated drive power 12.5 kW. Battery voltage 80 V, permissible battery weight 1,480 to 1,636 kg. Operating hours 5,813 h. Equipment: driver protection canopy, fork length 1,050 mm. Lodpfx Asz A Upgobyeru Location: Homburg (Saar), Germany. Inspection by appointment only. Price upon request, net plus VAT, ex location; dismantling and loading by arrangement. All information without guarantee.

Condition: new, Equipment: CE marking, 2 deck screener, including a built-in RPM meter of the screen box and aluminum wheel locking wedges. Possibility of delivery with petrol generator. Drawbar for easy transport for being towed by tractor or truck. The conveyor for fine fraction. Meshes mounted from 2mm to 100mm. Lrjdpoz Hyalefx Abysu

Condition: new, machine/vehicle number: 17279, Year of construction: 2026, load capacity: 16,000 kg, lifting height: 4,000 mm, free lift: 1,480 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,030 mm, fork length: 2,400 mm, front tire size: 12.00-20 100%, rear tire size: 12.00-20 100%, overall weight: 19,300 kg, Equipment: 3rd hydraulic function, enginetype: Diesel, manufacturer: Bobcat Serial Number: FDC0H-5107-00494 Lrodpfx Abszp T Auoyou

Condition: ready for operation (used), * Brand: Metso * Type: FS 283 , for wet screening. * Surface: 6000 x 1600 mm - 3 decks. * Incl.: 37 kW E-motor and outlet trough. * On stock: 3 pieces. Lodozd U Hkopfx Abyeru

Condition: excellent (used), Year of construction: 2003, Arburg 270S 250-60 U / Universal Machine Year of Manufacture: 2003 Injection Unit: Screw Diameter: 18 mm Shot Weight: 17 g Injection Pressure: 2500 bar Dosing Volume: 20 ccm Clamping Unit: Ljdez Iqruepfx Abyjru Clamping Force: 25 t Tie Bar Spacing: 270x270 mm Platen Size: 400x400 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: SELOGICA - Touchscreen Additional Equipment: Universal machine - Injection unit can operate both vertically and horizontally Euromap 12 Robot interface Air valve x 4 Hydraulic core pull x 1 Control system with hot runner system x 8 Injection unit hardened - bimetal Proportional valve on the injection unit – precise injection Type of injection unit: Vario, allows the injection unit to be used, for example, for side injection Automatically opening cover Dimensions: Weight: 1900 kg Length/Width/Height: 2.89x1.11x1.85 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in technical live tests at our company in Łódź. Price: On request

Year of construction: 2020, condition: used, functionality: fully functional, The i-Mark digital cutting machine Consisting of the I-Mark feeding system and the Graphtec CE-6000-60 Plus cutting plotter. Lrodoz A D Tbspfx Abyou The i-Mark system, as a digital cutting machine, enables operator-free contour cutting of adhesive films and digital prints on cardboard, screen prints, and other printing products. The movable arm of the digital cutting machine, which is equipped with a vacuum suction system, lifts the sheets from the input tray and feeds them to the plotter. Depending on the thickness and stiffness of the sheets, the i-Mark digital cutting machine can process 40 to 120 sheets. While the machine is running, additional sheets can be added without stopping the machine. The system is equipped with an internal vacuum compressor, which does not require any external air connections. The i-Mark digital cutting machine.

Condition: used, mileage: 808,110 km, power: 210 kW (285.52 HP), first registration: 04/2009, fuel type: diesel, number of seats: 38, gearing type: automatic, next inspection (TÜV): 04/2027, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, electronic stability program (ESP), soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle subject to final sale, errors, typos, and prior sale: Ljdpfx Aoz H Eb Uebysru Mercedes Benz Citaro (emergency seats) (Vehicle 128) First registration: 02.04.2009 808,110 km Engine: 6,374 ccm 210 KW / 286 HP Bluetec 5 Inspection due: 04/2027, TÜV (technical inspection) due: 10/2027 Permissible gross vehicle weight: 19,000 kg, unladen weight: 10,750 kg, payload: 8,250 kg Overall length: 12,000 mm x overall width: 2,550 mm x overall height: 3,100 mm Tires: 275/70R22.5, front approx. 80/60%, rear driven axle approx. 80/80%, rear non-driven axle approx. 70/70% Double doors at the front and rear Driver's cab with door Ramp Fully automatic transmission Microwave Electric windows 2 x electric + heated mirrors Auxiliary heating + 2nd heater Retarder Station brake LAWO Mobitec ICU 402 38 + 2 emergency seats + 60 standing places + 1 wheelchair space Emergency exit 12-volt socket Chassis components rusted 08.01.2024: Retarder solenoid valve new, 16.01.2024: Drain valve + air dryer cartridge new, 22.01.2024: Pressure regulator + drain valve line new, 22.04.2024: 4-way valve, pressure regulator solenoid valve new, 26.06.2024: Pressure regulator + air dryer cartridge replaced, 04.12.2024: Axle modulator new, 14.10.2024: Front axle, right side, new shock absorber, 25.04.2025: AT transmission at 751,660 km, 15.05.2025: Axle modulator new, 14.07.2025: Rear axle, right and left, upper stabilizer bar new, 23.04.2026: Water box new, 4-way valve new, pressure regulator adjusted Various signs of wear, consistent with age Last inspection at 751,660 km on 25.04.2025, next inspection at 811,660 km Price: €5,000.00 (net) All information provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €10,000 is the District Court of Ludwigslust; for disputes exceeding this amount, it is the Regional Court of Schwerin. Subject to errors, typos, and prior sale.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, operating hours: 8,907 h, load capacity: 3,000 kg, lifting height: 4,650 mm, fuel type: electric, mast type: telescopic, construction height: 2,900 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 250/60 - 12, rear tire type: superelastic tires (black), rear tire size: 180/70 - 8, overall weight: 5,285 kg, total height: 2,900 mm, total length: 2,350 mm, total width: 1,300 mm, fuel: electricity, Equipment: cabin, STILL RX 60-30 / 6323 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 3.000 kg Lifting height: 4.650 mm Closed height: 2.900 mm Mast: Standard (2W465) Fork length: 1.200 mm Fork carriage: 3A Drive: Elektro Battery: 80 V 620 Ah (2017) Charger: 80 V - not tested Tyres: Superelastik 250/60 - 12 (40%) / 180/70 - 8 (25%) Service weight: 5.285 kg Length: 2.350 mm Width: 1.300 mm Year of manufacture: 2009 Operating hours: 8.907 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin Internal no.: 1308860 Location: 14974 Ludwigsfelde bei Berlin Price on request. Lrsdpsz Aptijfx Abyou Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 6,853 h, load capacity: 2,500 kg, lifting height: 3,270 mm, fuel type: electric, mast type: telescopic, construction height: 2,260 mm, battery capacity: 775 Ah, battery voltage: 80 V, fork length: 1,200 mm, tire condition: 50 %, front tire type: superelastic tires (black), front tire size: 23x9-10, rear tire type: superelastic tires (black), rear tire size: 18x7-8, overall weight: 5,200 kg, total height: 2,260 mm, total length: 2,550 mm, total width: 1,250 mm, fuel: electricity, Equipment: cabin, sideshift, STILL RX 60-25 L / 6347 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 3.270 mm Closed height: 2.260 mm Mast: Standard (2W320) Fork length: 1.200 mm Fork carriage: FEM 2A Drive: Elektro Battery: 80 V/775 Ah (2018) Charger: 80 V - not tested Lodsz Apt Ajpfx Abysru Tyres: Superelastik 23x9-10 (50%) / 18x7-8 (40%) Service weight: 5.200 kg Length: 2.550 mm Width: 1.250 mm Year of manufacture: 2018 Operating hours: 6.853 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Heating, Full cabin ATTACHMENTS Sideshift, Fork positioner Internal no.: 1308842 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,171 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,200 mm, tire condition: 25 %, front tire type: superelastic tires (black), front tire size: 23 x 9 - 10, rear tire type: superelastic tires (black), rear tire size: 18 x 7 - 8, overall weight: 4,886 kg, total height: 2,260 mm, total length: 2,600 mm, total width: 1,200 mm, fuel: electricity, Equipment: sideshift, STILL RX 60-25 – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 4.900 mm Closed height: 2.260 mm Free lift: 1.550 mm Mast: Triplex (3F493) Ljdjz Aqixepfx Abyjru Fork length: 1.200 mm Fork carriage: FEM 2A Drive: Elektro 80V Battery: 80 V 620 Ah v. 2020 Charger: Dreiphasig 80 V 125 A not tested Tyres: Superelastik SE 23 x 9 - 10 (25%) / 18 x 7 - 8 (50%) Service weight: 4.886 kg Length: 2.600 mm Width: 1.200 mm Year of manufacture: 2012 Operating hours: 6.171 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights, Pulse control ATTACHMENTS Sideshift Internal no.: 1309260 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, machine/vehicle number: 516329X00173, Year of construction: 2020, operating hours: 992 h, load capacity: 5,000 kg, lifting height: 4,950 mm, mast type: triplex, fork length: 2,400 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 4,950 mm Fork length: 2,400 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery voltage: 80 V Lredez Dfq Repfx Abyou Battery capacity: 930 Ah Battery voltage at rest: 83.1 V Dimensions & Weight Dimensions (L x W x H): 5,500 x 1,400 x 2,500 mm Own weight: 7,400 kg Service valid until: 04/2027 UVV (Occupational Safety) valid until: 04/2027 Operating hours according to display: 992 h EQUIPMENT Former Still full-service unit 3rd and 4th hydraulic valve; fork positioner with side shifter Full free lift Hydraulically adjustable forks Full cabin with plastic doors Windshield wiper Non-marking white tires LED work light, front LED work light, rear Orange warning light Safety light, front Comfort seat with lumbar support Charger: Hawker Enersys All dimensions are approximate values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible at a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notice from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine and day will be charged for non-timely collection. Outstanding storage fees must be paid in full before collection. Lot number: 535

Condition: used, machine/vehicle number: 516329G00447, Year of construction: 2016, operating hours: 11,358 h, load capacity: 5,000 kg, lifting height: 5,400 mm, mast type: triplex, fork length: 2,300 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 5,400 mm Fork length: 2,300 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery voltage: 80 V Battery capacity: 840 Ah Battery year of manufacture: 2017 Battery voltage at rest: 85.3 V Service valid until: 07/2027 UVV (Industrial Safety Regulation) valid until: 07/2027 Dimensions & Weight Dimensions (L x W x H): 5,200 x 1,350 x 3,000 mm Own weight: 8,300 kg Operating hours according to display: 11,358 h EQUIPMENT Full free lift 3rd and 4th hydraulic valve Side shifter Hydraulic fork positioner Full cabin with heater and windshield wiper LED work light front LED work light rear Road traffic lighting with turn signals Safety light rear Comfort seat with lumbar support and seat heating Hawker Enersys battery charger All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Ljdpsz Dfrbjfx Abyjru Side loading up to 6 tons with a large forklift truck on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 558

Condition: good (used), Year of construction: 2008, 1 used surface grinding machine Manufacturer: STÖCKEL Type: FX 60/30 SPS Year of manufacture: 2008 Grinding area: approx. 600 × 300 mm Magnetic chuck: approx. 600 × 250 mm Speed: 1900 rpm Grinding height: 400 mm Drive power: 9 kW Operating voltage: 400 V / 50 Hz Table load: 250 kg Lodoz Dkuuopfx Abyjru Control: PLC Weight: 3000 kg

Condition: excellent (used), Year of construction: 2006, Control system: Heidenhain MillPlus IT Lsdpfx Abjz Dk I Uoysru Travel ranges X/Y/Z: 730 x 510 x 510 mm Spindle speed: 12,000 rpm Tool magazine for 60 tools, SK 40 NC rotary table integrated into a fixed table, diameter 600 mm / 1000 mm x 600 mm Controlled NC swivel milling head (B-axis) incl. hydraulic clamping Swiveling range -120/+30° 3D quick SET Production package 40 bar/23 l/min (theoretical pump output), tank 600 l Paper band filter Rotating viewing window Chip conveyor

Condition: excellent (used), Catalog number: 7695 TECHNICAL DATA - Shaft width: 640mm - Number of knives: 4 - Max. thickness of the workpiece: 200mm *From above: - Ratchets - Toothed, sequential (divided, segmented) feed shaft - Pressure rollers - Planing shaft - Pressure rollers - Smooth feed-out shaft *From below: - Smooth sliding shaft (at the inlet) - Smooth feed shaft (at the outlet) - Adjustable rollers in the lower bed - Electric bed lifting - Main motor: 7.5kW - Infinitely variable feed speed adjustment: 8-24m/min - Diameter of the dust extraction nozzle: 180mm Lrjdpszu Sacsfx Abyou - Dimensions (L/W/H): 1400x1100x1650mm - Weight: 1650kg Net price: 17900 PLN Net price: 4163 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)

Condition: used, Year of construction: 2010, controller model: PC85, working width: 1,750 mm, milling spindle speed (max.): 24,000 rpm, working length: 6,000 mm, TECHNICAL DETAILS Machining method: Drilling and milling Number of work areas: 2 Work area X-axis: 6,000 mm Work area Y-axis: 1,750 mm Number of controlled axes: 5 Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Table system: Console work table with vacuum cups Number of vacuum consoles: 10 CNC positioning: Yes Lrjdpfoz Ekb Djx Abysu Vacuum cups for workpiece clamping: Yes Number of vacuum cups: 40 Drilling unit Number of drilling units: 1 Position of drilling unit: Top Vertical drilling spindles: 20 Horizontal drilling spindles, X-direction: 5 Horizontal drilling spindles, Y-direction: 5 Total drilling spindles: 30 Milling unit Number of milling units: 1 Position of milling unit: Top Controlled axes: 5 Motor power: 12 kW Speed: 24,000 rpm Liquid cooling: Yes Automatic tool changer: Yes Number of tool magazines: 1 Tool positions: 72 MACHINE DETAILS Control: PC85 Programming software: WoodWOP 5.0 Vacuum pumps: 2 Individual output per vacuum pump: 250 m³/h Total connected power: 49 kW EQUIPMENT Console work table with vacuum cups 10 vacuum consoles with CNC positioning 40 vacuum cups for workpiece clamping 2 vacuum pumps Top drilling unit with 30 drilling spindles Top 5-axis milling unit with 12 kW electric motor spindle Liquid cooling Automatic tool changer Tool magazine with 72 tool positions PC85 control WoodWOP 5.0 programming software Automatic chip extraction Safety mats on the front of the machine Safety sensors Fixed safety guards CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8167

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Radial duct fan for simple, direct installation in duct systems. Housing made of galvanized steel sheet. Rated voltage: 400V Frequency: 50Hz Phase(s): 3~ Power consumption: 1,246W Current: 2.25A Speed: 1,315 rpm Airflow: max. 3,168 m³/h Minimum static pressure: 250Pa Max. conveyed medium temperature: max. 40°C Max. medium temperature with speed control: 40°C Sound pressure level at 3m: 57dB(A) Motor protection class: IP44 Weight: 31 kg Rectangular duct connection, height at inlet and outlet: 300 x 600mm Lrodpfx Abox Hz A Hjyeu

Year of construction: 2024, operating hours: 5 h, condition: new, functionality: fully functional, The NOMA NOWICKI KN-60 cutter is a high-speed meat cutter with a 60-liter bowl, manufactured in 2024, designed for grinding, emulsifying, and mixing meat, fat, and other raw materials in small and medium-sized food processing plants and food service companies. The machine is equipped with a microprocessor-based control system with memory for 40 processing programs, stepless speed control for the blades and bowl, hydraulic unloading, and a hygienic design that facilitates cleaning. Replacement parts are included. The mixing function with reverse blade rotation (from – 200 to – 400 rpm) allows the filling to be gently mixed without further grinding. Once the process is complete, the finished mixture is discharged hydraulically, with an adjustable discharge disc speed, for both dry and liquid mixtures. All operating parameters are controlled by a microprocessor, which can store up to 40 processing programs. Key Features of the NOMA NOWICKI KN-60 meat cutter A wide range of blade speeds, smooth adjustment of blade and bowl rotation speeds, and the ability to select different blade combinations provide great flexibility when changing recipes and product consistencies. Reverse mixing, the ability to save 40 programs, and high hourly throughput ensure consistent stuffing quality with short processing times. The cutter’s design facilitates hygiene and operator comfort: all food-contact surfaces are polished, flat surfaces are angled at 3° to allow water to drain, and the covers open for cleaning. The high product entry threshold, the bowl rim, the opening in the lid for adding spices during operation, quick access to the blades, and the sound-dampening lid improve ergonomics and working comfort. Technical Specifications of the NOMA NOWICKI KN-60 meat cutter Manufacturer: NOMA (NOWICKI MACHINERY) Machine type: high-speed cutter Model: KN-60 Year of manufacture: 2024 Power supply: 3 x 400 V, 50 Hz Marking: CE, manufactured in the EU Bowl capacity: 60 L (60 dm³) Blade shaft speed: 200 – 6,000 rpm, continuously adjustable Lredpoz S Iafjfx Abyeu Mixing speed (reverse rotation): from -200 to -400 rpm Bowl speed: continuously adjustable Blade combination selection: Yes, choice of blade sets Cutting technology: “air cutting,” optimized bowl and blade geometry Unloading: hydraulic, adjustable unloading disc speed, optional stepped disc Control: microprocessor-based, memory for up to 40 processing programs Length: 1650 mm Width: 1,310 mm Height with the cover lowered: 1,190 mm Height with cover raised: 1,850 mm Control cabinet dimensions: 800 x 800 x 300 mm Weight: 1,350 kg Hygiene: polished food-contact surfaces, flat surfaces angled at 3°, removable covers, and a bowl drain hole for easy cleaning Ergonomics: high product entry threshold, bowl rim, opening in the lid for adding spices during operation, quick access to blades, sound-dampening lid Replacement parts: included

Condition: new, Year of construction: 2026, Equipment: soot filter, Now available: Bobcat E60 R2 – Top specifications We are pleased to offer you the Bobcat E60 with excellent special equipment. Condition: New machine Availability: Immediately from stock. Why Zirndorfer-Maschinenpark? Official authorized dealer for Bobcat & Montabert * Family-owned business with over 45 years of experience * Our own workshop for guaranteed quality * Wide selection of new and used machines Financing, leasing, or hire purchase? No problem – we will find the right solution for you through our partner banks. Trade-in your used machine? We will gladly accept your machine under fair conditions. Attachments and accessories? We can also offer additional attachments and suitable accessories upon request. Sale to EU or non-EU countries? We will take care of the processing for you. Special equipment of the machine: * Cabin * Camera * Mirrors * Heater * Automatic climate control * Radio * 2nd auxiliary hydraulics * 2 Speed (second travel speed) * Digital 7" Deluxe display * Suspended fabric seat * Seat heating * Diverter Lrodez N E R Njpfx Abysu * Long arm * Rotating beacon * Full LED * Refueling pump * Load holding valves * Additional counterweight * Hydraulic track tensioning * Automatic RPM control * LED light on the boom * Tilt with HS03 * 0% financing available for 60 months * 24 months manufacturer's warranty * Without attachment * Additional accessories available at an extra charge Standard equipment of the machine: * Double-acting auxiliary hydraulics * CE certification Trust in the experience of a third-generation family business. Zirndorfer-Maschinenpark e.?K. – Your partner for construction machinery. Contact us now and secure your individual offer. Legal notice: The information provided on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for errors, input errors, or data transmission errors. Subject to change.

Condition: used, mileage: 334,520 km, first registration: 01/1986, fuel type: gasoline, axle configuration: 2 axles, color: white, gearing type: mechanical, Year of construction: 1986, LICENSE PLATE: PD9815306 Lrsdpfxoxya I Ss Abyou TITLE: FIAT 60 10 USED SPECIAL PURPOSE VEHICLE FOR MOBILE SHOP (CATEGORY C LICENSE) REF. 25C40 YEAR: 1986 HORSEPOWER: 100 ENGINE DISPLACEMENT: 4570 cc EMISSIONS: Euro 0 KILOMETRES: 334,520 TRANSMISSION: Manual TOTAL VAN LENGTH: 6.00 m TOTAL VAN WIDTH: 2.10 m TOTAL VAN HEIGHT: 3.00 m INTERNAL VAN LENGTH: 4.10 m INTERNAL VAN WIDTH: 1.82 m INTERNAL VAN HEIGHT: 1.90 m COUNTRY OF ORIGIN / ABROAD: Italian AXLES: 2 WHEELBASE: 3000 mm SEATS: 3 PAYLOAD: ACCESSORIES: - Roof luggage rack with manual awning (to be replaced) REFURBISHED: No LAST INSPECTION: 21/05/2024 TYRE CONDITION: 50% Subject to errors and/or omissions. Displayed prices do not include VAT. Please contact our sales department for updated pricing and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA DEMOUNTABLES operates in the field of sales and procurement of industrial and commercial vehicles, with a focus on the waste management sector. We specialize in trucks, trailers, and demountable equipment. With a ready-to-deliver fleet of over 50 trucks and more than 150 bins, containers—with or without demountable cranes. E.&O.E. Due to the large number of listings and details provided, Aurora recommends verifying the accuracy of the information with our sales staff.

Condition: excellent (used), CATALOGUE NUMBER 8035 TECHNICAL DATA - shaft width 640mm - 4-knife shaft - max. thickness of workpiece on thicknesser 250mm - max. thickness of workpiece on side heads (3-sided) 110mm – from above: - ejectors - geared infeed shaft - pressure roller - planing shaft - pressure roller - smooth outfeed shaft - pressure roller at the outlet – from below: - guide strip - adjustable rollers in the lower bed 2 pcs – from the rear: - side spindles + pressure roller 2 pcs - spindle height 110mm - spindle diameter 30mm - spindles adjustable left/right, up/down - motors for side spindles 2x4kW - main motor 7.5kW - 3 feed speed types - electric table lifting - dust extraction nozzle 2x110mm - overall dimensions L/W/H 1650x1500x1210mm - weight 1370kg Lsdpfjzu Sgpox Abysru ADVANTAGES - Made in Poland - Shaft with 4 knives - Used planer, very good condition Net price: 23900 PLN Net price: 5558 EUR depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 2 kg, Equipment: documentation/manual, RENISHAW OMP 60 3D probe, SK40 OMP60 probe – used Compact 3D probe The optical signal transmission allows for the direct setup and inspection of workpieces on the machine and the transmission of the signal. Possible applications for the probe system include medium and large machining centers; compatible with all optical receivers from Renishaw. Switching methods for the probe can be adjusted. Factory setting: Optical On/Optical Off. Probe stylus, l = 100 mm, Probe ball, Ø 5.0 – ruby ball Mount for OMI-2 receiver – interface Protective sleeve and connector for the cable from the receiving unit Diameter 60 mm Battery compartment Weight approx. 1.54 kg Operating manual for the OMP60 probe is available in printed form and on CD-ROM Ledjznk I Sepfx Abyoru Made in UK RENISHAW OMI-2 transmitter/receiver OMM with connection cable Machine interface MI12 Honda Tool holder SK 40 Price negotiable Our asking price is €3,390 net, ex works, plus packaging costs. Subject to technical changes and errors. Sale exclusively to countries within the EU.