Used Protec 3 - D Lochtisch Lt 1000 X 2000 for sale (111,553)

Condition: ready for operation (used), Heidenhain UV 140 ID 335 009-02 SN10106578 in exchange (Exchange service), professionally fully overhauled and tested with 6 months warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange process, your defective exchange unit must be free from mechanical damage such as breaks, as these can no longer be repaired. In such cases, an additional fee of €1,000 incl. VAT will be charged. Attention: You are bidding on an inverter from Heidenhain UV 140 ID 335 009-02 SN10106578 in exchange (Exchange service), professionally fully overhauled and tested, six months warranty, fully functional, scope of delivery as per photos. Both in repair and exchange procedures, your defective unit must not show any mechanical damage like fractures, as these are irreparable. In this case, a subsequent invoice of €1,000 incl. VAT will be issued. Isdpfjx Etm Ijx Am Ioia

Condition: ready for operation (used), Heidenhain UM 114 ID: 325 005-12 SN: 11501009, professionally fully overhauled and tested, comes with a 6-month warranty, 100% functional, scope of delivery as shown in the photos. Please note: In the exchange process, your defective return part must not exhibit any mechanical damage such as fractures or breakage, as these cannot be repaired. In such cases, an additional charge of €1,000 (incl. VAT) will apply. Attention: You are bidding on a Heidenhain UM 114 Inverter, ID 325 005-12, SN 11501009, as an exchange unit (Exchange Service), professionally fully overhauled and tested, with a 6-month warranty, 100% functional, scope of delivery as per photos. For both repair and exchange procedure, your defective return part must not show any mechanical damage such as breakages, as these are not repairable. In these cases, a subsequent invoice of €1,000 including VAT will be issued. Iiodpfjx Etcpsx Am Ioa

Condition: ready for operation (used), Heidenhain UM 121D ID: 392 319-01 SN: 26385942E – supplied with test protocol, professionally overhauled and fully tested with 6 months warranty, 100% functional, delivery scope as shown in the photos. Please note: In the exchange process, your defective return unit must not show any mechanical damages such as fractures, as these cannot be repaired. In such cases, an additional charge of €1,000 incl. VAT will be invoiced. You are bidding on a Heidenhain UM 121D Inverter (ID 392 319-01, SN 26385942E) in exchange (exchange service). The unit is professionally overhauled, fully tested, and comes with 6 months warranty, 100% functional, delivery as per photos. In both repair and exchange processes, defective parts with irreparable mechanical damage (e.g., breakage) will incur an additional charge of €1,000 incl. VAT. Iiodsx Eth Espfx Am Ija

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UM 115D, 671 566-01, SN: 37309407A, offered on an exchange basis (exchange service). The unit has been professionally and thoroughly overhauled, tested, and is supplied with a 3-month warranty. It is 100% functional, with the scope of delivery as shown in the photos. Important: In the exchange process, your defective core must not show any mechanical damage such as fractures, as these cannot be repaired. In such cases, an additional charge of €650 incl. VAT will apply. Iisdpfx Amex Etfkj Ioa

Condition: ready for operation (used), Heidenhain UM 112 ID 325 001-02 SN13068381B in exchange, professionally fully overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos. Note: In the exchange process, your defective core may not have any mechanical damages such as fractures or breakages, as these are not repairable. In such cases, an additional charge of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain UM 121D, 667 838-01 SN:47635966A under exchange service, professionally completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery as shown in the photos. In both repair and exchange processes, your returned defective unit must not show any mechanical damage, such as cracks or breakages, as these cannot be repaired. If such damage is present, a subsequent charge of €1,000 including VAT will apply. Iisdpfx Asx Er Uqom Iea

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UV 101B, part no. 317 559-13, SN: 10084979, offered in exchange (exchange service). The unit has been professionally overhauled and fully tested, with a 3-month warranty and is 100% functional. Scope of delivery as shown in the photos. Please note: In the exchange process, your defective return part must not show any mechanical damage, such as breakages, as these are not repairable. If such damage is present, an additional charge of €400 incl. VAT will apply. Isdpfsx Etiijx Am Ijia

Condition: used, machine/vehicle number: 1, mileage: 465,000 km, power: 340 kW (462.27 HP), first registration: 08/2016, fuel type: diesel, tire size: 315/80 r 22.5, axle configuration: 6x2, brakes: engine braking, gearing type: mechanical, emission class: euro6, suspension: steel-air, Year of construction: 2016, Equipment: ABS, air conditioning, cruise control, parking heater, Used DAF CF 460 truck, 3-side tipper, 3 axles 6X2, year 2016, long cab with 1 bed, ZF 16-speed manual transmission, climate, Webasto, engine brake, ABS, Euro 6, ADR, body length 6,200mm, wheelbase 4,200mm, total truck length 8,660mm, total weight 26.000Kg, load capacity 14,770Kg, 1st axle leaf suspension, 2nd+3rd axle air suspension, 3rd axle steerable + liftable, alloy wheels, sunshade, tires 80% tire size 315/80 R 22.5, windows + electric mirrors, radio, Km 465,000, good condition. Iodpfx Amep Na Dlo Ijia INFO ENG: Used truck DAF CF 460, 3-sided tipper, 3 axles 6X2, year 2016, long cabin with 1 bed, manual transmission ZF 16 gears, air conditioning, Webasto, engine brake, ABS, Euro 6, ADR, body length 6,200mm, wheelbase 4,200mm, total truck length 8,660mm, total weight 26,000Kg, capacity 14,770Kg, 1st axle leaf spring suspension, 2nd + 3rd axle air suspension, 3rd steering axle + liftable, alloy wheels, sun visor, 80% rubber, tire size 315/80 R 22.5, electric windows + mirrors, radio, Km 465,000, good condition.

Condition: used, Technical details: Total force (nominal): 1000 to Iiodpfx Amox Ag Azj Ioa Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 4500 X 2400 mm Total force (nominal): 2-3-4-5- Presse - 1000 to. to table surface area: 2-3-4-5- Presse 4500 X 2200 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6

Condition: ready for operation (used), Fanuc A06B-0266-B100 SN: C03XA7281 + Pulsecoder A860-2000 servomotor, used, normal signs of use, 100% fully functional, scope of delivery as shown in the photos. Ijdox Dt H Ajpfx Am Ioia

Condition: ready for operation (used), Fanuc A06B-0229-B300 SN: C08XX3512 + A860-2000-T301 SN: 1179078 Pulsecoder, used, minor signs of wear, 100% fully functional, scope of delivery as per photos. Iiedpfx Aox Dt Efjm Ioa

Condition: ready for operation (used), Fanuc A06B-0239-B400 AC Servo Motor SN: C03XD5302 + Pulscoder A860-2000-T301, used, in good condition, 100% functional, scope of delivery as shown in photos. Iijdpfx Aex Dt E Som Iea

Condition: ready for operation (used), Fanuc A06B-0236-B100 AC servo motor SN: C03XD5286 with A860-2000-T301 pulsecoder SN: 161358030924, used, in good condition, fully functional, scope of delivery as per photos. Iijdpfxox Dt Ele Am Ioa

Condition: ready for operation (used), Heidenhain UVR 150D 390 421-01 SN22104737L - with test protocol, professionally fully overhauled and tested with a 3-month warranty, 100% functional, scope of delivery according to photos. Please note: In the exchange process, your defective exchange part must not have any mechanical damage such as breakage, as these can no longer be repaired. In such cases, a subsequent charge of €1,000 including VAT will apply. Attention: You are bidding on an inverter from Heidenhain, model UVR 150D 390 421-01 SN22104737L, in exchange (exchange service), professionally fully overhauled and tested with a 3-month warranty and 100% functionality, delivery contents as shown in the photos. For both repair and exchange procedures, your defective exchange unit must not show any mechanical damage such as breakage, since repairs are then no longer possible. In such cases, an additional invoice for €1,000 incl. VAT will be issued. Iisdpfx Amjx Dw A Us Isa

Condition: ready for operation (used), Siemens 6FX1136-8BB00 880 BGR Multiport E-Stand: D SN: 13, used, good condition, 100% functional, delivery as shown in the photos. Iedpfjx Dxc Nox Am Ijia

Condition: ready for operation (used), You are bidding on a Heidenhain inverter UVR 160DW, part number 560 106-01, SN: 28293633G, offered on an exchange basis (exchange service). The unit has been professionally refurbished, fully tested, and comes with a 3-month warranty. It is 100% functional and the scope of delivery is as shown in the photos. Please note: For the exchange process, your returned defective unit must not have any mechanical damage such as cracks or breakages, as these are irreparable. If such damage is present, an additional charge of €500 including VAT will be invoiced. Iodpsvknabjfx Am Ioia

Condition: ready for operation (used), Fanuc A06B-0225-B000 AC servo motor SN: C049X7373 + A860-2000-T301 pulsecoder SN: 312253, used, normal signs of wear, 100% fully functional, scope of delivery as shown in the pictures. Iijdpfx Aox Dt Dujm Ija

Condition: used, mileage: 70,060 km, power: 75 kW (101.97 HP), first registration: 01/2011, overall weight: 4,900 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,670 kg, empty load weight: 3,230 kg, tire size: 265/70R15, wheelbase: 1,900 mm, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 1, Equipment: additional headlights, air conditioning, cabin, Vehicle location: Bovenden, Kz. Haus, air conditioning, automatic transmission, high beam headlights, rotating beacon, leaf spring suspension, sweeper brush, green environmental sticker Wheelbase: 1900 mm. Construction: Sweeper with 3 front brushes. Operating hours approx. 8609! Iiedpfx Amowkixds Iea Working hours approx. 5444! ACCESSORIES INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors! - .

Year of construction: 1999, condition: ready for operation (used), Euromac hydraulic punching machine Type CX1000/30/2000 Isdpfjpmt Ttjx Am Ioia Capacity 30ton Y-axis reach 1000mm X-axis reach 2000mm X-axis range with repositioning up to 10000mm Control Euromac Eurowin 6-fold multitool + with 6-fold die holder

Condition: used, mileage: 229,812 km, power: 335 kW (455.47 HP), first registration: 03/2009, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2023, color: white, gearing type: semi-automatic, emission class: euro5, total width: 2,550 mm, total height: 3,890 mm, loading space volume: 14 m³, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Mercedes Actros 3346 K 6x4 Wiedemann Super 2000 8.0/6.0/2.0, water reclaimer superstructure * Wiedemann enviro tec * Super 2000 8.0/6.0/2.0, water recycling * 14,000 liter tank size * 2,000 liters of fresh water * 6,000 liters of rinsing water * 8,000 liters sludge volume * Emptying by tilting the tank 45° Vacuum system * Wiedemann & Reichhardt KW 3000 * approx. 3,000cbm/h * approx. 25m suction hose DN 125 * Suction pipe DN 125 w. Duct folder High pressure system * URACA P3-45 G 65 approx. 406l/min at 175bar * approx. 200m HP hose DN32 * Hydraulic flushing hose reel with approx. 60m DN 13 Iiedevh H Dyjpfx Am Ioa Special features * Suction and HP boom * 5 liter hand washing device * Stainless steel tool box * Control cabinet without display * Radio remote control with display * Device cabinet with two flaps - on both sides * Hose storage * Sound insulation of the pump compartment raised * Working lights * Central lubrication system Technical data * Unladen weight 18,810 KG * GGW 26,000 KG * Length 10,350 mm * Height 3,890 mm * Width 2,550 mm Special equipment: Axle load front axle 9.0 t, Audio system: CD radio comfort (Bluetooth), Exhaust raised behind cab, Compressed air horn, Cab: Movable cab entrance, Cab: Comfort suspension (1.8 HZ), 16-speed gearbox, Reinforced cooling, Air filter: Construction site vehicle filter, Air filter: Cyclone air filter, Power take-off independent of gearbox, Parameterizable special module, Rotating beacon left/right, Automatic circuit breaker, Sun visor, Stabilizer on 1st rear axle, Socket 12 volt, Stone impact protection grille, Front bumper in steel design, Drum brakes front and rear axle, Oil filter on front and rear axles, Oil filter on rear axle Socket 12 volt, Stone guard, Front bumper in steel design, Drum brake front and rear axle, Oil cooler transmission Further equipment: EURO 5 emissions standard, Axle configuration: 6x4, Exterior mirrors electrically adjustable and heated, Exterior mirrors wide angle and heated, left, Exterior temperature display, Battery 165 Ah, Roof hatch (steel), Rear axle differential lock, Cab: M (medium length), Suspension: leaf/leaf, Generator 80 A, Rear axle H 7, 13 t, Disc wheel 300, Hydraulic pump (Meiller pump - 6 pistons), Body/bodywork: Chassis for tipper (additional AV), Body/construction: tipper, Fuel tank: 300 ltr, Engine: 12.0 ltr. - 335 kW V6 diesel (OM 501 LA), Engine brake with constant throttle, Power take-off MB 2C, Wheelbase 3900 mm, Rear window, Seats in cab: Driver's seat, standard swivel seat, Telligent gearshift, Telligent brake system with ABS+ASR, Drum brake rear axle, CB radio preparation, Telephone/fax preparation, Front axle straight, Immobilizer, Thermal insulation glazing, Central locking incl. key, Gross vehicle weight 26.00 t For more detailed information and/or pictures, please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: used, mileage: 142,631 km, power: 353 kW (479.95 HP), first registration: 10/2005, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Internal number: #276 MAN TGA 32.480 8x2-6 BL Wiedemann enviro tec Super 2000, water reclaimer superstructure * Wiedemann enviro tec * Super 2000 * Water recycling * 15,500 liter tank size * 5,500 liters of rinsing water * 10,000 liters sludge volume * Emptying by tilting the tank 45° Vacuum system * Wiedemann & Reichhardt KW 4000 (water ring pump) * approx. 4,000 cbm/h * approx. 20m suction hose DN150 High pressure system * 2x URACA KD716 approx. 313 l/min at 160 bar * approx. 140m HP hose DN38 * Hydraulic flushing hose reel with approx. 40m DN16 Fresh water pump * Speck NP25 50/120 approx. 50l/min at 120 bar * Hydraulic flushing hose reel with approx. 40m DN13 Special features * Stainless steel sludge tank * Two high-pressure pumps (URACA KD716) * Suction and HP boom * Motor - start switchable from control cabinet * NMV - start can be switched from the control cabinet * Equipment cabinet with two flaps - on both sides * Hose storage * Sound insulation of the pump room raised * Central lubrication system Technical data * GGW 32,000 KG * Length 11,800 mm * Height 3,850 mm * Width 2,550 mm Chassis: Special equipment: Axle load front axle 9.0 t, battery 225 Ah, battery box, electric battery disconnect switch, operating hours counter, electrically adjustable and heatable curb mirror right, Comfortshift gearshift, flame-start system, heated fuel filter, fuel tank: 600 l aluminum, Eberspächer D4S auxiliary air heater, seat cover / upholstery: comfort quality, control module for external data exchange, reinforced front axle shock absorbers, front underride guard, offset front axle VOK-09 Further equipment: Axle configuration: 8x2, Trailer socket 24V / 7-pin, Trailer socket ABS, Anti-slip control (ASR), Electrically adjustable and heatable exterior mirrors, Exterior mirrors wide-angle and electr. adjustable and heatable, right, differential lock rear axle, EDC engine regulation, electronic brake system MAN-Brakematic, EURO 3 engine, cab: L, driver's seat comfort, tachograph, suspension: leaf / air, electric windows, generator 100 A, speed limiter 80 / 85 km/h, rear axle HY-1350, cabin filter: pollen filter, body/structure: Chassis, Rocker arm - brake EVB, Steering column (steering wheel) adjustable, Air compressor 1-cyl., Engine 12.8 ltr. - 353 kW diesel (D 2876 LF 12), Trailing axle NO-08, liftable, Radio preparation 24V, Disc brake rear axle, Disc brake front axle, Side guard, Side window, Front axle stabilizer, Plastic bumper, Rear underride guard, Electronic immobilizer, Central locking, Gross vehicle weight 32.00 t For more detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Iodpfx Amovh H Huj Isia Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: used, mileage: 2,000 km, power: 390 kW (530.25 HP), first registration: 06/2024, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Internal number: #312 MAN TGS 35.510 8x4 BL Wiedemann SUPER 2000 Spacer Chassis MAN * TGS 35.510 * 8x4-4 BL * 530 HP/390 KW * EURO 6 * 3,500 mm wheelbase * Approx. 3000 liter fuel tank * 385/55 R 22,5 * 315/70 R 22,5 * 315/70 R 22,5 * 385/55 R 22,5 * Rotating beacons * Air conditioning * Navigation system * Trailing steering axle Wiedemann enviro tec body * Super 2000 Spacer 11.5/5.0/1.0 Water recycling * 17,500 liter tank size * 11,500 liters of waste water * 5,000 liters of fresh water * 1 liter water chamber * Emptying by tilting the tank 45° Vacuum system Wiedemann & Reichhardt KW 4000 * 4.000cbm/h 106kW * Galvanized piping in DN 150 * approx. 25m suction hose DN 125 * Suction pipe DN 125 with duct folder * Silencer High-pressure system Uraca P3-45 65 406 liters/ at 175 bar * approx. 180m HP hose DN 32 * Hydraulic flushing hose reel with approx. 80m DN 13 Additional fresh water system Speck NP 25/50-150 with 50 l/min at 150 bar * Spring-loaded reel with 15m pressure hose DN 10 ? Special features Sludge tank and water tank made of material 1.4301 * Suction and HP boom * 20 liter hand washing device warm * Stainless steel tool box * Control cabinet with display * Motor - start switchable from control cabinet * NMV - start switchable from control cabinet * Radio remote control with display * Device cabinet with two flaps - on both sides * Hose storage * Sound insulation of the pump compartment raised * LED work lights * Central lubrication system Technical data Unladen weight 21,995 KG * GGW approx. 32,000 KG * Length approx. 11,200 mm * Height approx. 3,900 mm * Width approx. 2,550 mm Isdpfxovh H Npo Am Ieia For more detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment specifications available on request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connector strip with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized finish * 1 removable aluminum tailgate, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor above gooseneck, checker plate floor above king pin * 2-inch king pin * Rear section of gooseneck prepared for aluminum drive-on ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform and bevel for accommodating excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st axle steerable, all remaining axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lockout, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with raise and lower valve * Tires: 235/75 R 17.5, twin tires, 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Continuous 50 mm thick hardwood floor on the loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions, approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm ahead of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, usable as bridging elements for extension OR as widening planks * Aluminum elements lockable on telescopic tubes of the extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening planks * Aluminum elements lockable on the extension’s telescopic tubes Iijdpjtx Nwnefx Am Isa * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-section steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm in length and approx. 900 mm wide each * Hydraulically foldable ramp tips * Ramps can be shifted hydraulically approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber surface approx. 25 mm and steel plate surface approx. 5 mm as additional

Condition: used, Year of construction: 2000, overall weight: 150 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Iodpfx Ajx H Ttkjm Ieia

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,064 nm, table length: 3,050 mm, table width: 1,550 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,550 mm, type of input current: three-phase, overall weight: 6,500 kg, Equipment: CE marking, cooling unit, documentation/manual, safety light barrier, skyCUBE XLs class – Large Format – Shuttle Table Laser Cutting The multifunctional flatbed laser center skyCUBE XLs class, produced by PFEIFER technology in Saxony, Germany, is engineered for your professional cutting tasks. It combines advanced productivity with economic efficiency and precision. The machine housing is manufactured from welded and bolted steel construction, specifically designed for industrial and commercial applications. The drive system developed by PFEIFER technology ensures both precision and high repeat accuracy. skyCUBE laser systems meet all requirements of Class 1 according to DIN EN 60825-1, providing you with maximum safety. The ergonomic design with a pull-out worktable facilitates easy loading of the machine. Drawers in the lower section collect cutting residues efficiently. The skyCUBE laser software with file import capability generates precise laser cutting geometries for your requirements. Optimize your cutting quality and speed—even with thick materials—thanks to the 6kW laser power, including when using compressed air. Switch between materials while maintaining consistently high cutting quality without compromise. Monitor your production with ease: the large front doors allow convenient access to the entire working area. Position the operator console wherever you prefer. It is mobile, providing optimal visibility of the cutting process at all times. Iiodpfxew Ebzmj Am Ioa Naturally, your safety is the highest priority when operating the skyCUBE laser! The skyCUBE XLs is a Class 1 laser system. There is no risk of coming into contact with laser beam emissions or reflections during operation. With all our laser systems, nothing is more important than complete safety and compliance with the highest standards and regulations. Special safety glass panels and a perfectly shielded cutting area reliably protect you from laser radiation risks, while an independent safety system enables loading without interrupting production. Select the laser power that best suits your requirements; 6 kW is our current standard! (* Pricing depends on configuration and laser power; this is a factory-new laser machine from our own production) Maximum dimensions (L × W × H): 2310 × 8505 × 2505 mm / Laser machine: 4.0 T Power supply: depends on laser source (6kW), 400V/50Hz, 3-phase / 27kW Process gas control for: oxygen / nitrogen / compressed air according to material and process

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 12,000 W, laser wavelength: 1,064 nm, table length: 1,500 mm, table width: 3,000 mm, travel distance X-axis: 1,550 mm, travel distance Y-axis: 3,050 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 8,500 kg, warranty duration: 24 months, space requirement height: 2,400 mm, space requirement length: 8,550 mm, working range: 1,500 mm, Equipment: cooling unit, safety light barrier, XL class = processing area X 1550 mm x Y 3050 mm x Z 150 mm Iiedpfx Aor D Nfkem Isa High-precision linear axis system with 6 - 12 KW laser power Double change table system, laser processing at one working height! (* Prices depending on equipment and laser power, this is a brand new laser machine from our production) Maximum dimensions (L × W × H (with table 8504) × 2310 × 2400 mm / laser machine 6.5 T + external loading table 2T = 8.5 tons Power supply depends on the laser source (6kW) 400V/50Hz 3 phases / 27kW Process gas control for: oxygen / nitrogen / compressed air depending on the material and process Simple and highly precise laser processing - laser cutting at high speed and quality