Used Pneumatic 90° Angle Drill for sale (24,895)

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Nlsdpfjyilgdex Amnob Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM Max. drill Ø steel 1.5 - 10 mm Drilling depth 350 mm Table load 1600 Speeds / ranges 14000 Rpm Dimensions (Estimate) Length 4500 mm Width 4500 mm Height 2300 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1995, Number of T slots: 9 Jump from T to T: 172mm T size: 22mm Number of matching pieces:1 Length: 1000mm Width: 730mm Nedpjx Ttg Refx Amnslb Height: 1600mm Weight: 1350kg

Condition: excellent (used), plate height: 1,600 mm, plate width: 1,000 mm, 6 matching pieces identical available No scratches mint condition T size T 22 and 175 Jump from T to T  Grey casted angles plates Loading capacity 10.000 Kg Nlsdpfx Aox Trm Nomnob Number of T slots: 9 Jump from T to T: 175mm T size: 22mm Number of matching pieces:1 Length: 730mm Width: 1000mm Height: 1600mm Weight: 1300kg

Condition: excellent (used), Year of construction: 2010, total width: 1,000 mm, total length: 1,200 mm, total height: 2,350 mm, overall weight: 4,000 kg, 2 matching pieces availebel Cast iron not fabricated with welded construction Made in ITALIA grey cast iron very ridged Nljdpfxeykprvo Amneb Number of T slots: 13 Jump from T to T: 170mm T size: 22mm Number of matching pieces:2 Length: 1200mm Width: 1000mm Height: 2350mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1984, total width: 1,325 mm, total length: 3,500 mm, total height: 3,400 mm, overall weight: 6,570 kg, Drilling & Tapping in all directions Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Quill Ø: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Nedpfx Ameyrdplonslb Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2003, column diameter: 400 mm, drill diameter: 65 mm, Drilling ; Tapping in all directions Nlsdpfx Amjyub Spsnjb Can be moved in 7 axes Fast preparation, accuracy and performence on heavy and bulky parts. Field using Turbines, Generators, Compressors, Steel Construction, Boilers Containers, Chemoical equipment, furnces of cement work and shipbuilding Arm Length: 2070mm Max. drill Ø cast: 65mm Max. tap Ø: 48M Stroke pinole: 350mm Max. distance spindle - table:1550mm Min. distance spindle - table:305mm Speeds / ranges: 900Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 400mm Power: 4kW Max. drill Ø steel: 50mm Length: 3500mm Width: 1325mm Height: 3400mm Weight: 6570kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2021, total width: 1,000 mm, total length: 1,200 mm, total height: 3,500 mm, overall weight: 7,000 kg, Angles plate ASQUITH - HT-35/10 Nedpfx Amjxhgg Denslb MACH-ID 9260 Make: ASQUITH Type: HT-35/10 Year: 2021 Number of T slots: 14 Jump from T to T: 250mm T size: 28mm Number of matching pieces:1 Length: 1200mm Width: 1000mm Height: 3500mm Weight: 7000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Manufacturer: POREBA Type: TPK 90 / 110 Year of manufacture: 1994 Swing steady 1 is 150 mm Swing steady 2 is 350 mm Swing steady 3 is 500 mm 3 units suitable for TPK 90 (or with spacers TPK 110) Spacers are not included 2nd tool post to be mounted on slide Specifications Nsdpfewrrbkjx Amnolb Metric US Standard There are (still) no specifications for this machine. Dimensions (Estimate) Length 1200 mm Width 800 mm Height 1000 mm Weight 1800 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract terms. We recommend you check all important details.

Condition: good (used), Year of construction: 2004, Number of T slots: 8 + 3 Jump from T to T: 280mm Nlsdowu D Afjpfx Amnjb T size: 22mm Number of matching pieces:5 Length: 1250mm Width: 750mm Height: 2500mm Weight: 2900kg

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Make: DEGEN Nodpfx Ajx Tp Ahjmnelb Type: UTB Year: 2005

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Nsdpfx Amswyup Tjnslb Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Height: 3400mm Weight: 6500kg

Condition: excellent (used), Year of construction: 1994, Arm Length: 1600mm Max. drill Ø cast: 60mm Max. tap Ø: 42M Stroke pinole: 310mm Max. distance spindle - table:1505mm Min. distance spindle - table:320mm Floor / table area: 1470x986mm Speeds / ranges: 2500Rpm Spindle Taper: 6ISO/Bt/Mk Quill Ø: 55mm Nlodpfjx Sx D Sjx Amnjb Power: 4kW Length: 2900mm Width: 1200mm Height: 3200mm Weight: 4700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, 4 side complete machining Swivel drilling and milling unit DCM Dynamic Collison Monitoring CAM model QCK (Quick Check Kinematics) Transfer bore cycle (380-382) 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Nledpfx Aovn Sv Ujmnob Max. drill Ø steel: 36mm Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm W - Travel: 1600mm Table load: 7000 Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds/ranges: 6000rpm Length: 8100mm Width: 6300mm Height: 4300mm Weight: 31000kg

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours Njdpfx Aey Umklomnjlb 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 74500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine for concrete pile drilling, soil improvement, and vibrocompaction. Carrier device Sennebogen SR25BT (manufactured in 2008) with drilling attachment Delmag RH18 (manufactured in 2009). Drill table stroke 12.50m, total height 19.91m. Outreach 3.165 - 4.00m. Feed winch, winch for feed with freewheel, auxiliary winch, rear platform. Drill table SHT25, THE KDK ROTARY DRILL HEAD BT180-2 IS NOT PRESENT, PURELY A SOIL IMPROVEMENT DEVICE, drilling gearbox MBDA 3500 ABI. With single auger. NO Kelly bar. Mast support cylinder, automatic alignment. Hydraulic telescopic undercarriage with a width from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at BH 3.304. Drills and drilling accessories are available separately. Also available is a mobile mixing plant, brand MAT, consisting of a mixing container (throughput capacity 20m3/h), conveyor screw, mixing tank (capacity 4,000l), and plunger pump with remote control. The condition of the machine corresponds to the value of the operating hours. At the time of inspection in 2023, the machine was running/functioning without any abnormalities. As of October 2024, storage damages have occurred to valves, control, and hydraulic hoses. It is not possible to operate the machine with 2 attachments at the same time. The machine shows wear and tear appropriate to its age, mileage, and purpose of use on pins and bushes as well as signs of use (dents, abrasions, etc.). The machine was not tested under load. The machine was used with 55 and 80 paddles. After service and maintenance of the storage damages, the device is ready for use. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40844 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: excellent (used), Year of construction: 1998, Frame dowel and slot mortising machine from Hofmann HT 200 U with angle adjustment Specialized drilling machine for stair construction, window manufacturing, and universal applications thanks to pneumatic height adjustment. Angled doweling and baluster/rail drilling are easily possible due to the swiveling drilling unit. Motor with pole-change switch, two speeds Motor output 1.5 / 1.8 kW, 1400 / 2800 rpm Motor can be started via a practical handle switch Precision drill chuck with two inserts: 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise workpiece positioning Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of working height, allows doweling on two levels without repositioning Desired drilling heights for each drilling level can be set with a handwheel and digital counter; switching between levels is pneumatic and is operated from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, positionable at the front and back of the table 2 swiveling workpiece supports 2 side stops, can also be used as front support Mobile base Extraction port 80 mm 4 used but good drills: 9, 12, 16, 19 mm Few touch-ups on the paint, excellent condition, see original photos A used swiveling slot mortising machine in this condition is very rarely available. Nedjyfta Tepfx Amnolb CE mark Operating manual Dimensions: approx. 1200 x 1200 x 1200 mm (LxWxH), weight 310 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration and available in our warehouse – see “more offers from this supplier.”

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer, cordless rotary hammer -Manufacturer: Bauhaus Toolson, Cordless drill/driver type PRO-AS 18 Li-1 -Includes: charger and 1x battery Nljdsuwgg Dopfx Amneb -Number: 4x drill drivers available Price: per piece -Transport dimensions: 240/180/H240 mm Total weight: 1.9 kg/pc.

Condition: ready for operation (used), Year of construction: 1994, overall weight: 7,000 kg, Arm length 1800 mm, drilling capacity 80 mm, weight 7000 kg Njdpfxsyzq Dpo Amnelb

Condition: used, Year of construction: 2000, workpiece weight per basket 250 kg Nsdpfsy Ty Diox Amnjlb basket dimensions max. mm voltage pneumatisch weight of the machine ca. 400 kg dimensions of the machine ca. 1,35 x 1,50 x 2,35 m

Condition: good (used), Year of construction: 2002, Drilling and Milling Machine Manufacturer: KNUTH Type: TBF 500 Year: 2002 with coordinate table Spindle taper: MK4 Spindle speeds: 125-2500 rpm Motor power: 1.1 kW Table travel: X 500 mm, Y 160 mm Max. installation height: 300 mm Spindle stroke: 130 mm Table size: 200 mm x 730 mm Machine dimensions: Width 1000 mm, Depth 800 mm, Height 1800 mm, Weight approx. 350 kg Nedpjy Spubofx Amnolb In good condition.

Condition: like new (used), Year of construction: 2024, machine/vehicle number: 102-20, Single head eyeletting machine for foot operation with automatic eyelet feed, Available for an eyelet size with inner diameter of 4 mm or 5.5 mm, With self-punching eyelets: up to 20 sheets with 80 g/m2 paper or material thickness up to 2 mm Nsdjwgw Uljpfx Amnolb

Condition: used, Year of construction: 1970, taper MK 4 Nlodsxzu Dqspfx Amnjb feeds: ja weight of the machine ca. 1,5 t

Condition: used, Year of construction: 2008, x-travel 700 mm y-travel 420 mm z-travel 610 mm Control Heidenhain output 22 kVA weight ca. 5.200 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Nodpfx Amey Ty Izsnolb Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: excellent (used), bore capacity in steel (diameter) 45 mm Nledpfx Amoy T Sdhsnob throat 300 mm bore stroke 160 mm taper MK 4 table surface area 600 x 500 mm table adjustable 550 mm total power requirement 0,8 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 0,8 x 0,6 x 1,8 m

Condition: excellent (used), Year of construction: 2015, LAUDA Integral XT 1590 WS Manufacturer: LAUDA Dr. R. Wobser GmbH & Co. KG Nodpfoy Rmimsx Amnslb Model: Integral XT 1590 WS Order No.: LWP 551 Serial No.: LWP551-15-0010 Year of manufacture: approx. 2015 (derived from serial number) Design: Process thermostat / circulating chiller For sale is a used LAUDA Integral XT 1590 WS temperature control and cooling system for industrial applications in laboratory, research, chemical, pharmaceutical, and production environments. The unit is suitable for precise temperature regulation of external circuits, reactors, test benches, and process plants. Technical data as per nameplate: Voltage: 400 V / 3~ / PE / 50 Hz Power consumption: 13.8 kW Heating capacity: 8.0 kW Protection class: IP21C Refrigerant Circuit I: Refrigerant: R404A Filling quantity: 3.5 kg Refrigerant Circuit II: Refrigerant: R508A Filling quantity: 1.75 kg Technical data as per manufacturer: Operating temperature range: approx. -90 °C to +200 °C Cooling capacity: up to approx. 15 kW at +20 °C Max. pump pressure: approx. 2.9 bar Max. pump capacity: approx. 45 l/min Filling volume: approx. 10.5 – 17.4 liters Features: - LAUDA Command control system - Digital temperature regulation - Graphic display / LCD - RS232 / RS485 interface - Variable pump - Magnetically coupled pump - Connections for external temperature control circuits - Mobile floor-standing unit - Industrial-grade design Condition: Used device with age- and usage-related signs of wear. Visual condition as per photos. A full technical inspection under process conditions has not been performed. Scope of delivery: LAUDA Integral XT 1590 WS with control unit Scope of delivery as shown Dimensions & weight: Dimensions as per manufacturer: approx. 700 x 550 x 1600 mm (W x D x H) Weight as per manufacturer: approx. 280 kg Notes: Inspection possible by appointment. Loading and collection possible by prior arrangement. Commissioning, maintenance, and installation may only be carried out by qualified personnel. Commercial sale – sold without warranty. Subject to change and error.

Condition: good (used), Year of construction: 2009, Control: Heidenhain iTNC 530 Nledpfx Amey R N Ilonsb Spindle * Diameter: 180 mm * Taper: ISO 50 * Power: 51 kW * Speed: 2,000 rpm (2-speed gearbox) * Torque: 2,668 Nm * Spindle support: 550 mm * Internal high-pressure coolant Travel distances * X: 5,000 mm * Y: 3,500 mm * Z: 2,350 mm * W: 1,000 mm (quill permanently extended 200 mm, at maximum travel – total reach 1,200 mm) Table * Size: 2,000 × 2,500 mm * Load capacity: 28 tons * Hydrostatically supported * B-axis positioning: 0.001° (double pinion, backlash-free) Other features * Tool changer: 60 positions * Siemens axis and spindle motors * Linear scales on all axes + rotary encoder on rotary axis * Handwheel HR 410 * Chip conveyor