Used Pkh100 - Hydraulic Profile Bending Machine for sale (73,827)

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, working width: 6,000 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 3 mm, Equipment: documentation/manual, The face design of the segmental machine structure and the swing-mounted bending beam on the kinematic mechanism enable the bending of various complex shapes from steel and aluminum sheet with a maximum bending angle of 145 degrees and a maximum upper beam stroke of 200 mm. The machine is controlled by a three-axis programmable controller, allowing operation in three modes: Manual, single – includes one program consisting of a single bending stage and one backgauge setting, which can be repeated any number of times. The program comprises 60 programmable blocks, each containing 10 bends and backgauge positions. The machine can bend steel sheet up to 3 mm thick and aluminum up to 4 mm. The hydraulic oil has been replaced and the entire control system has been renewed. Iajdpexflfmjfx Am Ier

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Machine in excellent condition!! Standard specification: welded steel construction 3 drive rollers Ijdpfx Amer Ddurj Ijar horizontal and vertical working position shafts made of improved special steels digital reading portable control panel work instructions Optional equipment: Technical data: shaft diameter: Ø100 mm roller diameter: Ø315 mm working speed: 7 m/min engine power: 7.5 kW machine length: 2000 mm machine width: 1450 mm machine height: 1700 mm machine weight: 3650 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,050 mm, sheet thickness (max.): 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Centrally driven rolls powered by motor Hydraulically adjustable rear and lower rolls Precision bending with braked main motor Conical bending and pre-bending system Lower and upper roll drive by planetary gearbox Rear roll ball support system to facilitate sheet movement Compliance with EU safety directives High-strength forged steel rolls made of SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Iodpfxjw Slctj Am Ijar Operation manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for assistance in large diameter bending Ground and polished rolls Wire grooves at shaft ends NC control unit Dual speed operation Stepless speed adjustment Ejector system Hydraulic motor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending Capacity: 10/12 mm Upper & Lower Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Steel construction main frame - Hydraulic top roll opening head - Movable control panel - Motor-driven central rolls - Hydraulic up-down movement for rear and lower rolls - Precision bending with braked main motor - Cone bending and pre-bending system - Lower and upper rolls driven by planetary gearbox - Rear roll ball system facilitating sheet movement - Compliance with EU safety directives Iasdpfxjw Slcgj Am Ijr - High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - User manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Infinitely variable speed adjustment - Ejector system - Hydro-motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, overall weight: 5,400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Motor-driven central rolls Hydraulic up/down movement for rear and bottom rolls Precision bending with braked main motor Cone bending and pre-bending system Iedpfsw Slbvox Am Iear Upper and bottom rolls driven by planetary gearbox Rear roll ball support system for easier sheet movement Compliance with EU safety directives High-strength, forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator's manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for support in large diameter bending Ground and polished rolls Wire grooves on roll ends NC control unit Dual-speed operation Infinitely variable speed adjustment Ejector system Hydraulic motor option TECHNICAL DATA Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Condition: new, functionality: fully functional, Year of construction: 2026, laser type: fiber laser, laser power: 12,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam Iasdpsw A H T Asfx Am Ijr

Condition: new, functionality: fully functional, Year of construction: 2025, throat depth: 400 mm, warranty duration: 24 months, Model: GB-4016E Bending pressure (KN): 400 Bending length (mm): 1600 Distance between columns (mm): 1320 Maximum opening height (mm): 430 Slider stroke (mm): 180 Throat depth (mm): 400 X-axis stroke (mm): 400 X-axis speed (mm/s): 400 R-axis stroke (mm): 140 R-axis speed (mm/s): 200 Z-axis stroke (mm): 1040 Z-axis speed (mm/s): 400 Machine power (kw): 17.2 Iodpjwzqx Hjfx Am Ijar Dimensions (mm): 2090*1265*2290 Weight (kg): 3500

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 Iodpswk Rlxofx Am Isar max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: excellent (used), Year of construction: 1978, operating hours: 60,000 h, functionality: fully functional, This listing offers a hydraulic rubber vulcanization press manufactured by DAH TYAN HYDRAULIC MACHINE INDUSTRIAL CO., LTD, Taiwan, model D-TEA 22, produced in 1978. The machine is engineered for rubber processing applications, specifically for vulcanization using hydraulic pressure. We have two identical DAH TYAN HYDRAULIC MACHINE INDUSTRIAL CO. D-TEA 22 hydraulic rubber vulcanization presses available. Each press is equipped with 6 plates, making them ideal for vulcanizing 6 rubber or EVA foam sheets simultaneously. The plate dimensions are 105 x 100 cm. The main piston has a diameter of 60 cm. The total height of each press is approximately 350 cm, with a length of 100 cm and a width of 150 cm. During operation, we consistently used operating pressures of 120-160 bar. Iasdpeyqx A Rsfx Am Ier

Condition: not inspected (used), functionality: unexamined, overall weight: 100 kg, total height: 200 mm, jaw width: 160 mm, total length: 700 mm, total width: 160 mm, No reserve price – guaranteed sale to the highest bidder! By placing a bid you commit to timely collection either between 11 May 2026 and 13 May 2026 or between 18 May 2026 and 21 May 2026! TECHNICAL DETAILS Jaw width: 160 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 700 x 160 x 200 mm Weight: 100 kg External reference: Lot 26 / Wittner Isdpfxjyn Dffe Am Isar

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, operating hours: 76,447 h, machine/vehicle number: 605970300001, controller model: DOC 85C, number of axes: 5, overall weight: 1,500 kg, Equipment: bar feeder, TECHNICAL DETAILS Number of axes: 5 Average output: approx. 2,400 sheets/hour Bending capacity round tube R = 45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R = 35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Brass: 4 - 18 x 1.25 mm Positioning speed X-axis: 2,000 mm/s Bending speed H/Z Y-axis: 500 °/s Rotation speed Z-axis: 900 °/s Rotation speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T-axis: 0.1 mm Measuring tolerance Y/Z/Q-axis: 0.1 mm Maximum reach at maximum acceleration X-Y-Z: 1,000 mm - 90/90/0 - with tube 18 x 1.25 mm MACHINE DETAILS Isdpfx Aeyzyh Djm Isar Control: DOC 85C Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1,500 kg Operating hours: 76,447 h EQUIPMENT BLM bar feeder BLM CARM 7 Note: The machine is sold without conveyor belt and safety fencing.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 611080402022, Equipment: bar feeder, TECHNICAL DETAILS Axis Speeds Positioning speed X-axis: 2,000 mm/s Bending speed Y-axis: 400 °/s Rotational speed Z-axis: 900 °/s Rotational speed R-axis: 110 °/s Positioning speed T-axis: 400 mm/s Tolerance Tolerance X-axis: ±0.05 mm Tolerance T-axis: ±0.05 mm Tolerance Y-axis: ±0.05° Tolerance Z-axis: ±0.05° Tolerance R-axis: ±0.05° Bending Capacity Round profile (R = 35 kg/mm²): min. Ø 4 mm, max. Ø 22 x 1.5 mm Round profile stainless steel: min. Ø 4 mm, max. Ø 20 x 1.5 mm Round profile (brass/aluminium/copper): min. Ø 4 mm, max. Ø 28 x 1.5 mm Average output: 1,700–2,000 bends/hour MACHINE DETAILS Hydraulics System Tank capacity: 80 l Pump delivery rate: 13 l/min Pressure MR200E: max. 140 bar Ambient Conditions Ambient temperature: 5 to 40 °C Storage temperature: max. 70 °C, 24 h Relative humidity: 5 to 75 %, 24 h Electrical Data Supply voltage: 400 V ±5 % Power type: Three-phase without neutral Frequency: 50 Hz ±0.1 % Connected load: 9.5 kVA Rated current: 15 A Isdpfx Ajyzya Tjm Ioar Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,100 x 1,530 mm Machine weight: 1,850 kg EQUIPMENT BLM bar feeder BLM CARM 7 Bar feeder weight: 650 kg Conveyor belt Note: The machine is sold without safety guards.

Condition: good (used), Used press brake / bending machine by Hyllus / Stokfleth 1320 x 2 mm Isdpsy A Hfxefx Am Ijar

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 354, total length: 2,150 mm, total height: 1,600 mm, total width: 850 mm, controller manufacturer: Siemens, Equipment: CE marking, MACHINE DETAILS Control manufacturer: Siemens Control type: CNC Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 2,150 x 850 x 1,600 mm Transport weight: 800 kg Transport packages: 1 EQUIPMENT Documentation CE marking Iedpfx Asy Avuvjm Isar

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 2050 mm plate thickness 4.5 mm 4.0 mm roll length 2050 mm min. dia. 210 mm roll diam. toproll 140 mm weight 1530 kg range L-W-H 3220 x 1200 x 900 mm Exhibition machine from 2026 With only approx. 2 operating hours Condition like new Special price on request Features: Iajdpfx Aexaawgsm Ier - Robust electromechanical bending machine - 2 central rollers driven by electric motors (top & bottom rollers) - Top roller manually swivels out, with hinged bearing - Includes tapered bending attachment - Freely movable control panel - Bottom roller manually adjustable via handwheel - Asymmetrical roller arrangement - Self-braking main motor - Safety device (safety tether with switch unit) - CE marking/Declaration of Conformity Optional equipment included in the price: - Hardened rollers - Motorized side roller adjustment - Digital position display for motorized adjustable side roller

Condition: good (used), Year of construction: 2009, Used bending press from Euromac Iaodpfoyz Uw Tsx Am Ier Model: Digibend 360 Capacity: 36 tons Including many tools Year of manufacture: 2009

Condition: new, bending diam. - max. 36.0 mm ST cutting thickness max. 36.0 mm ST motor 1450 U/min oil volume 32.0 l motor 380 Volt 50 Hz Iedpexabntsfx Am Ioar total power requirement 5.5 kW weight 650 kg range L-W-H 1470 x 1200 x 1020 mm Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - "ECO mode" = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutting Ø 32.0 mm * for 2 pieces - steel 65 kg / mm² .. bending Ø 18.0 mm / cutting Ø 20.0 mm - steel 85 kg / mm² .. bending Ø 26.0 mm / cutting Ø 28.0 mm * for 2 pieces - steel 85 kg / mm² .. bending Ø 14.0 mm / cutting Ø 18.0 mm * Machine video: ?v=zagTSA81VyA

Condition: used, Year of construction: 1992, sheet width 2050 mm plate thickness 10.0 mm ST pre-bending 8.0 mm ST diameter of upper rolls ~ 205 mm side roll diameter ~ 195 mm Control konv. oil volume 80.0 Liter voltage 380 V total power requirement 5.5 kW weight 3200 kg range L-W-H 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front * Operation - Control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal Iaedpsxacdvsfx Am Ijr - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch unit) - Operating instructions (PDF)

Condition: new, pressure 28 t Iaodeqzmgqjpfx Am Ior piston stroke 180 mm diameter of piston 130 mm table-size 300 x 550 mm working feed 2 - 9,8 mm/sek return speed 20 mm/sec Max. pressure 200 bar bending capacity - flat iron 200 x 10 mm weight of the machine ca. 800 kg dimensions ca. 1150 x 1103 x 750 mm The horizontal hydraulic press (28 ton) can be used for many different metal working jobs. The press has a piston stroke of 192 mm and can be equipped with all kinds of tooling for specific bending or straightening jobs. We supply a standard toolingset with this press including a stampholder and backgauge. However, we also produce custom-made tooling for your specific request. Thanks to the NC-control you can easily set the cylinder stroke and save up to 100 working cycles. With this horizontal hydraulic press you are able to bend, straighten, notch, cut and form. A universal hydraulic press that serves all your needs in cold metal working processes.

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Manufacturer: Dako Gedore, electro-hydraulic pipe bender on a mobile base -Pipe diameter: 3/8" to 3" Iaedpfx Aex Nfhrem Ier -Stroke: 320 mm -Motor: AEG 1.5 kW -Accessories: incl. bending jaws up to 2,5" (see photos) -Transport dimensions: 1140/1045/H1200 mm Total weight: 389 kg

Condition: used, functionality: fully functional, machine/vehicle number: 3217, sheet thickness steel (max.): 50 mm, working width: 2,500 mm, Boldrini SIJ 2500x50 Three Roll Initial Pinch Plate Bending Machine 2,500mm x 50mm plate capacity Cardan shaft drive from gearbox Radio control console control of rolls and rolling speed Ijdpfx Amsy Azgwe Ijar

Condition: used, Year of construction: 2015, total length: 1,500 mm, total height: 1,800 mm, total width: 2,500 mm, Empty weight: 1.000 kg Price: On request Iasdpfjyy Slxsx Am Ijr Capacity: 42 tons Max. bending stroke: 200 mm Table dimensions: - Length: 1250 mm - Width: 850 mm Ram dimensions: - Length: 300 mm - Width: 200 mm Model: Horizontal bending machine - Year: 2015 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 308 - Motor power: 4.0kW - Transport dimensions: 1500mm x 2500mm x 1800mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 13960, overall weight: 3,340 kg, Göteneds K25-25 A1200 Kombi – Metalworking Machine For sale is a robust and reliable combination machine from the Swedish manufacturer Göteneds. This machine is ideally suited for industrial metalworking applications, distinguished by its sturdy construction and precise operation. Isdpsy D A Hnsfx Am Iear Technical Data: Manufacturer: Göteneds (Sweden) Model: K25-25 A1200 Kombi Working area (SS 1312): 2550 x 25 mm Serial number: 13960 Year of manufacture: 06/1994 Weight: approx. 3,340 kg Description: The machine is designed for demanding applications, offering high stability and dependable performance in continuous operation. Its massive construction makes it particularly well-suited for precise machining processes. Condition: Used, fully operational (more detailed condition information can be added – e.g., "can be inspected under power" or "regularly serviced"). Special features: High-quality machine made in Sweden Excellent build quality Industrial-grade design

Condition: used, Year of construction: 2025, total length: 1,300 mm, total height: 1,400 mm, total width: 800 mm, Empty weight: 800 kg Price: On request - Year: 2025 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: HB10011N2025006 - Operating hours: 0 Ijdpfexixrujx Am Iear - Control: Teach-in - Motor power: 4.0kW - Transport dimensions: 1300mm x 800mm x 1400mm (l x w x h) - Transport weight [kg]: 800kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1994, condition: ready for operation (used), Euromac Digibend 360 Capacity: 36 Tons Stroke: 250 mm Tooling available optionally at extra cost We also supply new Euromac Digibend machines, notching machines, press brakes, press brakes with robots, and punching machines. Iajdpfx Aoy Ducnsm Isr For any questions, feel free to contact us without obligation.