Used Pant Crimping Press- Heavy Duty for sale (16,877)

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Lasdpfx Amefdkb Topsa Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Lodpfx Aomhh Dzsmpeaa - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. Lasdpfomhh Ansx Ampea The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) Lajdpfx Aeguk A Hempja - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Lsdsguk Dkepfx Ampoaa Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms, 1,200 mm usable depth, with guards - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excluding timber purlins and trapezoidal metal sheets for the roof structure) - Includes longitudinal and diagonal braces for 1,500 mm upright spacing - Incl. mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available to order at any time) Lasdpfx Amsmhhy Nopea - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright: 2,700 kg plus additional roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - Per upright: 3 bolted cantilever arms, depth 1,200 mm, with guards = 4 storage levels - Including longitudinal and diagonal braces with 1,500 mm upright spacing - Rack length: 12,100 mm - Including mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standard - Specialist telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notice before delivery. The material is thoughtfully packaged to facilitate easy unloading. The substructure must be concrete, level, and suitable for dowel anchoring, and capable of bearing the applied loads. The floor condition and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is neither required nor recommended. According to Occupational Safety regulations, it is recommended that the uprights have at least 500 mm overhang above the top storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Ljdpfoguk Dvox Ampeaa Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Lajdpfx Asmhh Dtompoa Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, turning diameter over bed max.: 4000 mm Ledpoyuqkbofx Ampsaa turning diameter over slide rest . mm turning length 7700 mm speed 0-750 u/min

Condition: used, turning diameter over bed 1420 mm turning diameter over slide rest 1040 mm turning length 6000 mm turning diameter in the gap 1460 mm Ledjyuqd Iopfx Ampoaa spindle bore 150 mm Speed 2,5 - 500 (24x) U/min. total power requirement 30 kW weight of the machine ca. . t dimensions of the machine ca. . m

Condition: excellent (used), This system If designed to continuously cool veg products in glycol chilled water what was bought new by our customer to chill sachets of hot sauces and soups at 2500 KG per hour. Available separately or as a line with infeed and outfeed conveyors. Lodpfxeh Uyg Ne Ampoaa

Condition: used, Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Handover: in its current condition as inspected -Condition: without brakes, without lights -Manufacturer: Heavy-duty transport wagon with 1-axle turntable steering -Platform: 10,000 x 2,500 mm -Load capacity: 24 t -Tires: Pneumatic dual tires 8.25R15, see photos -Overall dimensions: 12130/2500/H1070 mm -Transport dimensions: 10310/2500/H1070 mm -Weight: 5300 kg Lajdpfx Ajyrg Udempoa

Condition: used, Nedcon pallet rack approx. 3.1 linear meters, used 🧰 Product Features • Manufacturer: Nedcon • Color: Blue • Condition: Used, see photos • Frames: 2 units pre-assembled, 500 x 105 cm • Frame width: 10 cm • Beams: 8 units with 290 cm clear span Ledpfx Amoy D Nybopsaa • Safety pins: 16 galvanized safety pins • Anchoring: 8 Hilti concrete anchors • Load capacity: 2,000 kg per level • Bay load: 12,000 kg • Shelves included! 💰 Price: €440 net excl. VAT • Quantity discount: On request • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Inspection and collection: Possible at any time by appointment Over 5,000 linear meters of pallet racking from various manufacturers in stock at all times (Subject to changes and errors in technical data, information, and prices as well as prior sale! See our General Terms and Conditions, all prices excl. VAT ex stock.)

Condition: used, functionality: fully functional, empty load weight: 1,345 kg, total length: 2,700 mm, Year of construction: 2018, construction height: 540 mm, load capacity: 6,000 kg, tractive force with load: 6,000 N, construction width: 2,110 mm, Heavy duty trailer Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 18x7-8 non-creeping Rear tires Type: Superelastic Rear tires Size: 18x7-8 non-chalky Description: All-wheel steering Lsdpfsu Dzrujx Ampsaa Non-creep tires,

Condition: used, functionality: fully functional, empty load weight: 1,680 kg, total length: 3,000 mm, construction height: 470 mm, drive type: Keine, tractive force with load: 15,000 N, construction width: 1,680 mm, Heavy duty trailer Condition: Ready for use and fully functional Lasdpfsu Dzrnox Ampja Technical condition: very good Front tires type: Superelastic Front tires size: 265/160-160 Rear tires Type: Superelastic Rear tires Size: 265/160-160 Description: In addition to this --make-- model, we have approx. 200 heavy-duty forklifts, compact forklifts, sideloaders & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail on this --make type-- P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment.

Condition: used, functionality: fully functional, empty load weight: 1,850 kg, total length: 4,000 mm, Year of construction: 2024, construction height: 710 mm, load capacity: 18,000 kg, tractive force with load: 18,000 N, construction width: 2,000 mm, Heavy duty trailer Condition: Ready for use and fully functional Ledou Dz Rqspfx Ampeaa Technical condition: New Description: All-wheel steering - steering knuckle with adjustable track and steering rods, steering limiting pull at 45 ° steering stop, drawbar: 1,200 mm with drop protection and height adjustment and

Condition: used, functionality: fully functional, empty load weight: 1,345 kg, total length: 2,700 mm, Year of construction: 2018, construction height: 540 mm, drive type: Keine, load capacity: 6,000 kg, tractive force with load: 6,000 N, construction width: 2,110 mm, Heavy duty trailer Condition: Ready for use and fully functional Technical condition: very good Front tires type: Superelastic Front tires size: 18x7-8 Rear tires Type: Superelastic Rear tires Size: 18x7-8 Description: All-wheel steering Ledpfx Amju Dzrzopeaa

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Heavy-duty roller conveyor with individually adjustable rollers. 8 units on a steel frame. Roller length: 550 mm. 2 x 8 m, or 1 x 8 m. Roller diameter: 165 mm. Robust bearing design. Suitable as an infeed roller conveyor for planers, double edgers, resaws, etc. Lsdpfx Amsyq Nmtjpoaa

Year of construction: 2005, condition: excellent (used), functionality: fully functional, Heavy-duty roller conveyor with individually adjustable rollers. 8 units on a steel frame. Roller length: 550 mm. 2 x 8 m, or 1 x 8 m. Roller diameter: 165 mm. Robust bearing design. Suitable as an infeed roller conveyor for planers, double edgers, resaws, etc. Ljdeyq Nndjpfx Ampoaa

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Lasdpfx Aexw Uf Tompsa

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer Lajdpfeyq R H Uox Ampea -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Platform: 5350/1320/H840 mm / 4100 mm extendable to 9360 mm -Load capacity: 15 t -Tires: Solideal 425/150-305 solid rubber dual tires -Transport dimensions: 5350/1320/H840 mm -Weight: 1760 kg

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with 4-axle turntable steering -Platform: 6100 x 2450 mm -Load capacity: 20 t -Tires: 16 x solid rubber 150/100-13 (23X5) Lajdpfx Aoyq Rxqempja -Drawbar: reversible, double-sided trailer coupling -Quantity: 1x transport trolley available -Transport dimensions: 4080/1240/H450 mm -Weight: 450 kg

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with turntable steering -Platform: 1250/6540/H660 mm -Load capacity: 1.0 t -Tires: Solid rubber 6.00-9 Laedpfjyq E Itex Ampea -Number: 3x heavy-duty transport trolleys available Price: per piece -Transport dimensions: 5200/1250/H660 mm -Weight: 420 kg

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with single-axle turntable steering -Platform: 5280/1325/H820 mm / 790 mm extendable to 6070 mm Laedpfxjxuqipj Ampsa -Load capacity: 16 t -Tires: Solideal 425/150-305 solid rubber dual tires -Dimensions when retracted: 7120/1325/H820 mm -Weight: 1760 kg

Condition: used, mileage: 296,000 km, power: 427 kW (580.56 HP), first registration: 09/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Equipment and Technical Specifications for: General Information: * Chassis Serial Number: 2134791 * Chassis Type: R 580 A6x2NB * VIN: YS2R6X20002134791 * Maximum permissible gross combination weight: 66 tonnes ---- Technical Data: * Engine: DC16 106/580 hp, 16 litre displacement, 426 kW (580 hp), Euro 6 * Transmission: GRSO905R, Opticruise, overdrive, economy, standard, and power modes * Wheelbase: 3550 mm * Axle configuration: 6x2 * Maximum permissible gross vehicle weight, technical: 30 tonnes * Maximum speed: 89 km/h (legally 90 km/h) * Front axle load: 9000 kg * Rear axle loads: 12700 kg (first axle), 8300 kg (second axle) * Tyre sizes: Front axle 385/65 R22.5, Rear axle 295/80 R22.5, Trailing axle 295/60 R22.5 * Rim material: Aluminium (Alcoa DuraBright) * Rim diameter: 22.5 inches * Brakes: Electronic Braking System (EBS7), Hill Hold, Emergency Brake Function, ABS/EBS 6S/5M * Suspension: Air suspension front and rear, 2-bag air suspension on rear axle * Steering: THP90, ratio 18.6:1, adjustable steering wheel (tilt + telescopic), airbag in steering wheel ---- Electrical System: * COO8 * LED headlights * LED fog lights * LED tail lights * Daytime running lights with LED * Remote control for climate and infotainment * Bluetooth * USB charging ports * ESP with deactivation * Navigation with Europe maps * Lane change warning system * Reversing signal * Distance sensor system (DIS2) ---- Cab: Type CR, length 20 dm * High roof * Colour: White (Ivory White) * Tinted windscreen * Rain sensor * Air conditioning (Premium) * Auxiliary heater (WTA cab and engine heater 6 kW) * Electrically adjustable roof hatch * Roof rails * Electrically adjustable and heated exterior mirrors * Coffee machine in roof console * Coolbox in storage compartment bottom rear driver’s side * Leather seats (driver and passenger) * Ventilated driver’s seat * Premium infotainment system AUS4 * DAB+ / Navigation / Bluetooth / AUX-IN * TV pre-installation on driver’s side * Roof-mounted air horn * Electric windows * External and internal sun visors * Heated electric exterior and front mirrors * Navigation system * Reversing camera * Stationary heater * Auxiliary stationary air conditioning * Automatic climate control * Two bunks * Leather seats * Leather multifunction steering wheel * Refrigerator ---- * Retarder * Adaptive cruise control * Lane departure warning * Emergency brake assist * Hill start assist ---- * Differential lock on drive axle * 3rd axle is a lift axle * Alloy wheels * Full air suspension ---- Superstructures & Accessories * HMF 3220 K4 loading crane * 4 extensions * RCL 5300 system * Radio remote control * 2 hydraulic outriggers * Load capacity at 12.3 m = 2170 kg * Load capacity at 4.6 m = 6410 kg * Sliding fifth wheel ---- * Tyres front axle: 385/65R22.5 * Tyres rear axle: 295/60R22.5 * Fuel tank: 400 litres * AdBlue tank: 80 litres * Technical GVW: 30,000 kg * Kerb weight: 14,275 kg * Overall length: 7060 mm * Wheelbase: 3550 mm ---- Vehicle number: 11945 ---- Subject to errors and prior sale ---- All advertising and various inscriptions removed digitally. ---- We are happy to assist you with all formalities required for vehicle purchase – simply let us know your wishes or queries and we’ll handle them. For an additional fee, we can also offer the following services: ---- Trade-in of your old vehicle TÜV/SP approval Complete export processing Financing arrangements Application for export licence plates Vehicle transfer Registration of vehicles Veh Lajdsyv Uhuspfx Ampsa