Used National Formax Plus Fxp35S Cold Former for sale (7,597)

Condition: used, Technical data: Pressing force: 178 kN Drive power: 4 kW Work cycle time: 23 s Loading height: 928 mm Loading opening width x height: 1195 x 558 mm Bale length x width x height: 1200 x 780 x 1000 mm Bale weight: 250 kg Machine width x depth x height: 1700 x 1075 x 2499 mm Dcodpfx Adjv Akmzohon Machine weight: 1300 kg 4-fold with polyester tape Year 2010-2013

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Djdpfsy Hkd Hex Adhecn Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: N0038312, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, Equipment: documentation/manual, type plate available, For sale: Manual Mitutoyo Crysta Plus M 544 CMM – complete, calibrated 2023 Manual Mitutoyo Crysta Plus M 544 three-dimensional measuring machine (CMM) for sale. Features: - Measuring volume: X=500 mm / Y=400 mm / Z=400 mm - Serial number: N0038312 — Ref. 196-472-NL - MCOSMOS V2.4R12 software (GEOPAK + PartManager) - Renishaw MH20i + TP20-SF probing system Dcodpfoy U Urdjx Adhsn Included in the sale: - Dedicated PC (Windows XP Pro, HP monitor, keyboard/mouse) - Complete probe kit (cross with 4 probes Ø1mm, Ø2, Ø3, Ø4) - Calibration sphere Ø19.9956 mm with ISO 17025 certificate (2023) - Mitutoyo France calibration certificate No. 23042801 — compliant, May 2023 - Complete operating manuals (GEOPAK v2.0 and v2.4, Geopak-Win Editor, PartManager) Machine can be viewed and tested while powered on. For sale due to internal reorganization. In perfect working order.

Year of construction: 2015, operating hours: 2,677 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, number of axes: 3, This 3-axis punch press for profiles PARS HMP SIRIUS PLUS -3000/3-L1 was manufactured in 2015. It features a maximum section dimension of 110 x 110 mm and can handle wall thicknesses up to 8 mm. The machine offers a punching speed of 1 hole/s and is capable of punching 2 sections simultaneously with its 2-row design. If you are looking to get high-quality punching capabilities, consider the PARS HMP SIRIUS PLUS -3000/3-L1 punch press for profiles we have for sale. Contact us for further details. • Punching speed: 1 hole/s (including shift to next position) • Max. section dimensions: 110 x 110 mm • Wall thickness: up to 8 mm • Shear cylinder force: 17 t / 30 t • Section length: 3 m • Number of punching axes: 1–6 (holes in X–Y–Z system) • Number of punching rows: 1–2 (2-row machine punches 2 sections simultaneously) Djdpfx Ajzhv Ttedhecn • Main axis drive: linear motor or rotary servo motor • Expanding adapter for internal section support (deformation-free punching) • Automatic mechanical centering of the section at the shear point • Micro-lubrication only at the shear point

Condition: used, mileage: 299,806 km, power: 103 kW (140.04 HP), first registration: 02/2018, fuel type: diesel, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro6, number of seats: 5, Year of construction: 2017, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, VW Crafter 2.0 TDI, medium wheelbase, with 5 seats, featuring: air conditioning, navigation, auxiliary heater with remote control, electric windows, tilting window in the second row of seats. Dcedpfx Adjzgz Efehon - Special features: Second battery with battery monitoring; driver and passenger airbags; passenger airbag can be deactivated; Discover Media audio navigation system (touchscreen color display); electrically adjustable and heated exterior mirrors; driver assistance systems: front and rear parking sensors; chassis: reinforced suspension and shocks; sliding windows in cargo/passenger compartment: front left and right; vehicle without cargo partition; Climatic air conditioning (driver’s cab) with second evaporator; side marker lights; smoker's package; spare wheel in matching tire configuration including on-board tools and jack; rear door hinges with increased opening angle; comfort seats for driver and front passenger; auxiliary heater with remote control; 4 x 12V power sockets in the cab; rear entry step integrated in bumper; half-height plastic cladding in the cargo/passenger compartment. Additional equipment: Convex exterior mirrors left and right; LED indicators integrated into exterior mirrors; rubber floor covering in cab; aerodynamic underbody paneling; dual headlights; twin-tone horn; grab handle on rear left and right roof pillars; hill start assist; brake assist system (HBA); crosswind assist; front electric window lifters; laminated safety glass windscreen; grab handles on A-pillars; rear wing doors without windows; LED interior lights in cab and cargo/passenger compartment; body type: standard panel van; roof type: standard roof; 75-litre fuel tank; front radiator grille with upper chrome trim; steering column (steering wheel) adjustable; headlight beam adjustment; N1 homologation (commercial vehicle registration); engine: 2.0 L - 103 kW TDI; rear fog light; wheelbase: 3640 mm; tire repair kit; low-emission as per Euro 6 emissions standard; right-side sliding door in cargo/passenger compartment; SCR system (AdBlue technology); electro-mechanical power steering; seat upholstery: fabric; 6.5x16 steel wheels; start/stop system; front bumper in grey with colour-coded trim; lashing points in cargo area; driver's seatbelt warning system; heat-insulating glazing; central locking with remote and interior actuation; permissible gross vehicle weight: 3.5 t. - Financing available via our partner banks. We are happy to assist you. Please note: subject to prior sale as this item is also offered on other platforms. Accessory specifications provided without guarantee. Changes, prior sale, or errors excepted. We offer and strongly recommend a viewing and inspection to ensure buyers have an accurate understanding of condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged.

Condition: good (used), Year of construction: 2005, Console table with vacuum suction plate New control system installed in 2022 (price: €9,000) Control program: Xilog Plus X-axis between stops: 2500 mm Y-axis with milling: 1240 mm Y-axis with drilling: 1080 mm Z-axis: 200 mm (max. workpiece height: 100 mm) Main spindle HSK 63 with 6.5 kW, up to 24,000 rpm 4 tool changers at the front 4 tool changers at the rear Drilling unit External dimensions: 5.8 x 2.8 m Dsdpfx Adszhgz Ijhjcn

Condition: used, Shimadzu Type: AG-X plus 20kN-50kN +750mm Dimensions: W 1206 x D 765 x H 2920 mm Technical specifications: Fmax: 50 kN Speed: 0.00005~1500 mm/min Accuracy: ±0.1 % JIS B7742 Class 0.5, ASTM E2658 Class A Crosshead-table distance (mm)(tensile stroke)*3: 215 to 1940 (20 kN: 0 to 1535 mm, 50 kN: 0 to 1475 mm) Possible test width: 600 mm Djdpjzimkfsfx Adhjcn Frame stiffness: 180 kN/mm 710 kg 200 V 4.5kVA/15 A + Accessories as shown Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and errors!) If you have further questions, we will be happy to answer them by phone.

Condition: excellent (used), Year of construction: 2010, Model: Wittmann Tempro TP+D-S-2:160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Dcodpfx Adozw Drvjhen Heating power: approx. 9 kW per zone (up to 12–16 kW optional) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized system) Cooling: Plate heat exchanger, cooling water G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 independent circuits Features: Automatic filling, pressure monitoring, leak-free pump, mold purging, SSR heater control Options included: SO-C safety package + S-PLUS D 160 performance upgrade Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 95–120 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Kasto Kastodisc M10 Vertical Circular Saw, Metal Cutting Saw Manufacturer: Kasto Type: Kastodisc M10 Metal Cutting Saw Year of Manufacture: 2009 Condition: Used, very good, ready for demonstration Dcjdpfxsztylds Adhen Scope of Delivery: - Documentation - Coolant system - 1 x Saw blade (used) - Material stop, 1000 mm

Condition: good (used), functionality: fully functional, XOCA 2000/5 sheet metal bending machine. Dedpfx Adezurxlehecn

Year of construction: 2023, condition: like new (used), HHS cold glue applicator with 4 heads KFE-E-KP6-MEP 4x HD hose PTF-1/4″ + one spare head Complete unit, new price: €17,000 Dsdpfx Aozzar Hodhecn The unit has only been used once and is otherwise in new condition.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 60 t, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Dcedpfx Adjz Aafpohon Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: good (used), Weld edge former, weld edge former, weld preparation, weld edge forming machine, edge milling device, edge milling machine, mobile milling machine -Manufacturer: BDS, Weld edge former/edge milling machine -Type: SKF 20 -Power: 1.1 kW -Accessories: see photos -Box dimensions: 460/355/H355 mm Dcedpfx Aox Ehf Nodhon -Total weight: 29.4 kg

Condition: good (used), Welding edge former, welding edge former, weld seam preparation, welding edge forming machine, edge milling device, edge milling machine, mobile milling machine -Bevel length: max. 20 mm -Dimensions box: 460/360/H355 mm -Weight: 24 kg Dodpfsd Izt Ssx Adhscn

Condition: excellent (used), functionality: fully functional, REFRIGERATION UNIT: CARRIER Dcodpfjz Aa Rxsx Adhsn Unit with Wilo circulation pumps + external condenser. Dismantled by a professional refrigeration company. The unit does not contain glycol. The transport costs depend on the weight, volume and above all the distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require a telephone contact, so please ask about transport costs and other delivery methods to contact us by phone. Our contact details can be found in the seller's legal information. Payment in cash on delivery on site. We sell and export worldwide, thanks to our very large warehouse capacity we can also flexibly and quickly deliver larger quantities. Please contact us before purchasing. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: good (used), 400mm multiformer in lovely condition. Dsdsv D Hfpopfx Adhjcn

Condition: used, Year of construction: 2016, operating hours: 704 h, machine/vehicle number: 3886, overall weight: 4,900 kg, working height: 12,000 mm, enginetype: Electric, manufacturer: JLG Dcedpozcbkhefx Adhen

Condition: used, Year of construction: 1971, functionality: fully functional, machine/vehicle number: 3229, type of input current: three-phase, rotational speed (min.): 35 rpm, rotational speed (max.): 70 rpm, input voltage: 500 V, For sale is a robust metal circular saw from the manufacturer Eisele, model VMS III. This machine is a classic cold circular saw designed for industrial use and stands out due to its solid construction and durability. Ideal for workshops, metal fabrication, or locksmith operations. Technical data: • Manufacturer: Eisele • Type: VMS III • Year of manufacture: 1971 • Machine number: 3229 • Rotational speeds: 35 / 70 rpm • Voltage: 500 V • Motor power: approx. 1.8 to 2.6 kW • Frequency: 50 Hz • Version: Three-phase current • Equipped with a vise and mechanical feed Condition: Dsdpfx Adjy Dc I Sjhecn Used condition, appropriate for its age. The machine is of heavy-duty construction and well-suited for refurbishment or immediate use. Visually with signs of wear.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,497 h, construction height: 3,270 mm, power: 209 kW (284.16 HP), empty load weight: 9,450 kg, total length: 5,274 mm, construction width: 2,620 mm, Tractor Speed category: 50 Technical condition: good Dodpfsy U A H Njx Adhscn Battery condition: good

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 1,500 kg, # PILOUS ARG 500 plus S.A.F. The PILOUS ARG 500 plus S.A.F. is a heavy-duty horizontal band saw designed for the precise and efficient cutting of metal profiles, solid materials, pipes, and structural sections. The machine is suitable for industrial applications and offers adjustable blade speed, hydraulic clamping, and a robust construction for reliable long-term operation. ### Technical Specifications * Model: PILOUS ARG 500 plus S.A.F. * Blade dimensions: 6040 × 41 × 1.3 mm * Blade speed: 15–90 m/min * Main motor: 400 V, 50 Hz, 4 kW * Pump motor: 400 V, 50 Hz, 0.12 kW * Hydraulic motor: 400 V, 50 Hz, 0.55 kW * Working height of vice: 870 mm * Hydraulic system oil capacity: 26 l * Hydraulic oil: ISO 6743-4/HM, DIN 51524 Part 2-HLP * Coolant tank capacity: 35 l * Machine dimensions, minimum: 1410 × 2370 × 1580 mm * Machine dimensions, maximum: 2000 × 2800 × 2150 mm * Machine weight: 1530 kg ### Cutting Capacity | Cutting angle | Round material | Square material | Rectangular material | | ----- | -----: | -----: | -----: | | 90° | Ø500 mm | 450 mm | 620 × 450 mm | | 45° | Ø500 mm | 440 mm | 440 × 450 mm | | +45° | Ø500 mm | 440 mm | 430 × 450 mm | | ±60° | Ø350 mm | 310 mm | 310 × 400 mm | Dcsdpfx Adezvhw Tjhsn The PILOUS ARG 500 plus S.A.F. combines high cutting capacity, variable blade speed, and hydraulic operation, making it a suitable solution for demanding industrial metal-cutting applications.

Condition: like new (used), Kaltenbach TL 350, manufactured in 1993, but used very rarely! Aluminum circular saw with manual feed and manual vertical clamping device. According to Kaltenbach documentation, the technical specifications of the TL 350 are: Saw blade: Ø 350 mm Motor power: 2.0 kW Cutting speed: 3,200 m/min Cutting range 90°: round 115 mm, square 100 mm, flat 250 × 40 mm Cutting range 45°: round 115 mm, square 100 mm, flat 190 × 40 mm Mitre angle: −45° to +30° Dcodpezww A Uefx Adhen Weight: approx. 68 kg Dimensions: approx. 450 × 840 × 750 mm Working height with base: approx. 1,008 mm A new saw blade is included!

Condition: used, Gehrungs cold-cut circular saw machine MEP Type Tiger 350 CNC FE Factory No. 00011818 Year of manufacture 1995 Cutting range at 90° round: Ø 115 mm Cutting range at 90° rectangle: 180 x 95 mm Cutting range at 45° round: Ø 110 mm Cutting range at 45° rectangle: 125 x 95 mm Cutting range at 30° round: Ø 90 mm Cutting range at 30° rectangle: 90 x 95 mm Cutting range round: Ø 120 mm Rectangle: 180 x 100 mm Vise opening: max. 185 mm Saw blade diameter: 350 mm Miter cut: 60° left to 45° right Saw blade speed: 15 / 30 / 45 and 90 rpm Motor power: 1.8 and 2.6 kW Mains connection: 400 Volt, 50 Hz Compressed air requirement: 6 bar - CNC control for up to 80 different cut lengths with corresponding quantities ???? - CNC control, cut length and quantity programmable - hydro-pneumatic saw head lowering - pneumatic material clamping - pneumatic material support - jaw feed with servo drive and ball screw - feed stroke programmable up to 9999 mm - 2 gear stages and 2 motor speeds Djdpfjzrpl Djx Adhecn - coolant system in the machine stand Space requirement L x W x H: 2000 x 1100 x 2030 mm Weight: 650 kg Good condition

Condition: ready for operation (used), HSM V-Press 860 baler, year 2008–2009, price: €5,800 Pressing force: 54 kN Specific pressing force: 63.46 N/cm² Drive power: 7.5 kW Cycle time: 25 s Loading height: 1,110 mm Feed opening width x height: 1,195 x 650 mm Bale dimensions (L x W x H): 1,200 x 780 x 1,200 mm Bale weight: 480 kg Machine dimensions (W x D x H): 1,797 x 1,247 x 2,985 mm Machine weight: 2,008 kg Binding material: wire Materials processed: foil, mixed paper, cardboard, die-cut waste, textiles, Big Bags, polystyrene HSM V-Press 860 plus, year 2013–2015, price: €8,000 HSM V-Press 860 L, year 2015, price: €9,000 Djdpfxjra Rbgo Adhscn HSM V-Press 860 plus, year 2019, price: €9,000 HSM V-Press 860 plus, year 2024, price: €10,000 HSM V-Press 860, new/ex-demo, year 2020, price: €13,000 4-fold bale wire tying Bale dimensions (L x W x H, mm): 1,200 x 800 x 1,000–1,200 Bale weight: approx. 500 kg Technical data (L x W x H, mm): 1,213 x 1,824 x 2,987 Feed opening (mm): 1,200 x 565 Cycle (s): 35 Pressing force (t): 54 Power supply (V): 400 (three-phase) HSM V-Press 860 plus B, year 2020, price: €14,000 Pressing force: 594 kN Voltage/Frequency: 400 V/50 Hz Drive power: 4 kW Feed opening width x height: 1,500 x 651 mm Bale dimensions (L x W x H): 1,500 x 780 x 1,200 mm Bale weight: 550 kg Feeding type: Manual Machine dimensions (W x D x H): 2,099 x 1,245 x 2,985 mm Machine weight: 2,336 kg Binding material: wire Material processed: foil, cardboard Idle cycle time: 25 s

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale: Boxmaker 2500 working width, fully automatic, 2 flexo printers 500x200 mm, 2 die cutters for hand holes, or depending on the installed die, year of manufacture 2023. Dcedpfx Asxgbycedhjn

Condition: new, functionality: fully functional, empty load weight: 683 kg, maximum load weight: 2,017 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,535 mm, loading space width: 2,150 mm, tire size: 195 / 50 R 13C, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Unideck Plus 450/2 S 2.7T NEW VEHICLE Internal dimensions: 453cm x 215cm Total weight: 2700kg Dodpfx Adozvb N Nehocn Payload: 2017kg Braked 2-axle trailer Overrun brake and parking brake from KNOTT or AL-KO 2x 1350kg axles and brake with automatic reverse function Suitable for transporting longer vehicles Low chassis Bolted, hot-dip galvanized steel frame Steel ramps in the rail channel Numerous tie-down points along the entire length Reinforced 13" C tires with steel valve M+S tires 13-pole plug Side marker lights Rear lights with reversing light and triangular reflectors Winch with brake and bracket 2x wheel chocks OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with bracket -Complete LED lighting -Anti-theft device -Replacement of steel rail with aluminum rail -Wheel stops -Folding crank-operated rear supports -Anti-sway coupling Further accessories available upon request! Plus shipping to Gera and vehicle registration document €250 net Images are examples and may show accessories that are subject to an additional charge. Have you not yet found the right trailer? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repair, including for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. We also offer a wide selection of rental trailers. Visit us online or come by directly!