Used Mte Kompakt Plus for sale (5,622)

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Dcodpfey Nd Hysx Aa Hsl Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: N0038312, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, Equipment: documentation/manual, type plate available, For sale: Manual Mitutoyo Crysta Plus M 544 CMM – complete, calibrated 2023 Manual Mitutoyo Crysta Plus M 544 three-dimensional measuring machine (CMM) for sale. Features: - Measuring volume: X=500 mm / Y=400 mm / Z=400 mm - Serial number: N0038312 — Ref. 196-472-NL - MCOSMOS V2.4R12 software (GEOPAK + PartManager) - Renishaw MH20i + TP20-SF probing system Included in the sale: - Dedicated PC (Windows XP Pro, HP monitor, keyboard/mouse) - Complete probe kit (cross with 4 probes Ø1mm, Ø2, Ø3, Ø4) - Calibration sphere Ø19.9956 mm with ISO 17025 certificate (2023) Djdpsy U Urdefx Aa Hscl - Mitutoyo France calibration certificate No. 23042801 — compliant, May 2023 - Complete operating manuals (GEOPAK v2.0 and v2.4, Geopak-Win Editor, PartManager) Machine can be viewed and tested while powered on. For sale due to internal reorganization. In perfect working order.

Condition: excellent (used), Year of construction: 2011, BATTENFELD 35/75 PLUS INJECTION MOLDING MACHINE Technical specifications: Year of manufacture: 2011 Operating hours: 89,192 h Clamping force: 350 kN Injection volume: 25.4 cm³ Injection shot weight: approx. 23–27 g PS Screw diameter: 18 mm Maximum mold opening stroke: 200 mm Column spacing: 270 x 260 mm Platen dimensions: 470 x 280 mm Minimum mold height: 150 mm Centering hole diameter: 110 mm Maximum injection pressure: 2034 bar Hydraulic oil volume: 125 dm³ Total power: 28 kW Machine weight: 1050 kg Machine type: hydraulic Dedpfsy Uk Axox Aa Hecl Control system: BATTENFELD UNILOG B2 The machine is in very good technical and visual condition. A larger number of machines in the same configuration are available – a total of 12 units manufactured in 2010–2011.

Condition: new, Year of construction: 2025, load capacity: 2,500 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: triplex, construction height: 1,990 mm, fork length: 1,200 mm, empty load weight: 4,750 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished in accordance with FEM-4.004 and current safety standards, ensuring maximum quality and safety for your operations. From the chassis to the battery, including drivetrain, brakes, steering, and electrics – each vehicle undergoes thorough inspection and reconditioning. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ units available ✔ Worldwide shipping & customs processing ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase On-site testing and consultation available – we will find the right solution for you. Industrial Truck Specifications: - Manufacturer: Heli - Type: Counterbalance Forklift CPCJ25-KU-4R - Drive: Diesel - Load capacity: 2,500 kg - Year of manufacture: 2025 - Operating hours: 0 - Lift height: 3,700 mm - Mast type: Triplex - Full free lift: Yes Dsdpfx Aoy Rqcqea Hjcl - Overall height: 2,015 mm - Fork length: 1,200 mm - Unladen weight: 4,750 kg - Tyres: Pneumatic - Model variant: CPCJ25-KU-4R - Cabin type: Partial cab – front, roof & rear window - Lighting: 2x front work lights - Lighting: 1x rear work light - Lighting: Rotating beacon - Attachment: Sideshift - Attachment: Additional hydraulic circuit routed to carriage

Condition: ready for operation (used), Year of construction: 2024, workpiece length (max.): 750 mm, workpiece width (max.): 530 mm, workpiece height (max.): 6 mm, The machine has already been dismantled by a specialist company and placed in storage. TECHNICAL DETAILS Punching width max.: 530 mm Punching length max.: 750 mm Material thickness max.: 6 mm EQUIPMENT PC workstation DZDV-PC-TOUCHSCREEN PC 32" 9970460-20 incl. console Hot foil stamping/embossing system SLEEKING System HAK 100/Brother Dodpfszb Iihex Aa Hocl Note: Accessories are sold as is, without warranty. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, For sale: CNC bending machine CIDAN FS26 PLUS. With an adjustable bending center, the bending beam maintains a constant distance to the radius rail throughout the entire bending process. The result is an ideal radius, without causing material stress, regardless of the thickness, perfect finish, and almost unparalleled accuracy of angles and measurements. Technical specifications: Year of manufacture: 2024 Total weight: 2930 kg Control: CNC with nuLink Mechanical deflection compensation adjustment (Crowning system) Working length: 2600 mm Max. bending thickness: 2.5 mm Bending beam tooling: 7/10 and 25 mm Automatic back gauge – flexible 1550 mm CNC control with nuLink graphical user interface (intuitive, easy programming) High accuracy and repeatability Application: This machine is designed for bending, forming, and profiling sheet metal. It is perfectly suited for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys, and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. Dodpfx Aaszc Hpis Hocl If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2026, AUTHORIZED DEALER Company PROD-MASZ. BENDING BENCH technology Halver, YOUR competent partner when it comes to BENDING BENCHES Folding bench RED Plus 2200/1,2 from the company Prod - Masz to try on site and to take away. You will receive professional instruction on site. Technical specifications: -Working width 2140mm - Sheet metal thickness up to 1,2mm -Non-ferrous metals 30% more sheet thickness -Bending angle up to 165° -Bending beam: 15 mm - Passage: 80 mm -degree scale -Stop for preset bending angles - Shelf for sheet metal -Front depth stop -Weight about 420kg Other dimensions (1000,1440,2140,2640,3140,3640,4140mm) on request Accessories - roller scissors (up to 0.8mm) 350EUR Shipping within Germany 180 EUR All prices are plus 19% VAT. Dcedpfx Aaezdcmys Hol Self pickup Certificate CE Guarantee: 12 months. Self pickup

Year of construction: 2015, operating hours: 2,677 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, number of axes: 3, This 3-axis punch press for profiles PARS HMP SIRIUS PLUS -3000/3-L1 was manufactured in 2015. It features a maximum section dimension of 110 x 110 mm and can handle wall thicknesses up to 8 mm. The machine offers a punching speed of 1 hole/s and is capable of punching 2 sections simultaneously with its 2-row design. If you are looking to get high-quality punching capabilities, consider the PARS HMP SIRIUS PLUS -3000/3-L1 punch press for profiles we have for sale. Contact us for further details. • Punching speed: 1 hole/s (including shift to next position) • Max. section dimensions: 110 x 110 mm • Wall thickness: up to 8 mm • Shear cylinder force: 17 t / 30 t • Section length: 3 m • Number of punching axes: 1–6 (holes in X–Y–Z system) Dodpfezhv Ttex Aa Hocl • Number of punching rows: 1–2 (2-row machine punches 2 sections simultaneously) • Main axis drive: linear motor or rotary servo motor • Expanding adapter for internal section support (deformation-free punching) • Automatic mechanical centering of the section at the shear point • Micro-lubrication only at the shear point

Condition: used, mileage: 299,806 km, power: 103 kW (140.04 HP), first registration: 02/2018, fuel type: diesel, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro6, number of seats: 5, Year of construction: 2017, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, VW Crafter 2.0 TDI, medium wheelbase, with 5 seats, featuring: air conditioning, navigation, auxiliary heater with remote control, electric windows, tilting window in the second row of seats. - Special features: Second battery with battery monitoring; driver and passenger airbags; passenger airbag can be deactivated; Discover Media audio navigation system (touchscreen color display); electrically adjustable and heated exterior mirrors; driver assistance systems: front and rear parking sensors; chassis: reinforced suspension and shocks; sliding windows in cargo/passenger compartment: front left and right; vehicle without cargo partition; Climatic air conditioning (driver’s cab) with second evaporator; side marker lights; smoker's package; spare wheel in matching tire configuration including on-board tools and jack; rear door hinges with increased opening angle; comfort seats for driver and front passenger; auxiliary heater with remote control; 4 x 12V power sockets in the cab; rear entry step integrated in bumper; half-height plastic cladding in the cargo/passenger compartment. Additional equipment: Dodpfezgz Efsx Aa Hecl Convex exterior mirrors left and right; LED indicators integrated into exterior mirrors; rubber floor covering in cab; aerodynamic underbody paneling; dual headlights; twin-tone horn; grab handle on rear left and right roof pillars; hill start assist; brake assist system (HBA); crosswind assist; front electric window lifters; laminated safety glass windscreen; grab handles on A-pillars; rear wing doors without windows; LED interior lights in cab and cargo/passenger compartment; body type: standard panel van; roof type: standard roof; 75-litre fuel tank; front radiator grille with upper chrome trim; steering column (steering wheel) adjustable; headlight beam adjustment; N1 homologation (commercial vehicle registration); engine: 2.0 L - 103 kW TDI; rear fog light; wheelbase: 3640 mm; tire repair kit; low-emission as per Euro 6 emissions standard; right-side sliding door in cargo/passenger compartment; SCR system (AdBlue technology); electro-mechanical power steering; seat upholstery: fabric; 6.5x16 steel wheels; start/stop system; front bumper in grey with colour-coded trim; lashing points in cargo area; driver's seatbelt warning system; heat-insulating glazing; central locking with remote and interior actuation; permissible gross vehicle weight: 3.5 t. - Financing available via our partner banks. We are happy to assist you. Please note: subject to prior sale as this item is also offered on other platforms. Accessory specifications provided without guarantee. Changes, prior sale, or errors excepted. We offer and strongly recommend a viewing and inspection to ensure buyers have an accurate understanding of condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged.

Condition: good (used), Year of construction: 2005, Console table with vacuum suction plate Dcsdpfx Ajzhgz Ija Hol New control system installed in 2022 (price: €9,000) Control program: Xilog Plus X-axis between stops: 2500 mm Y-axis with milling: 1240 mm Y-axis with drilling: 1080 mm Z-axis: 200 mm (max. workpiece height: 100 mm) Main spindle HSK 63 with 6.5 kW, up to 24,000 rpm 4 tool changers at the front 4 tool changers at the rear Drilling unit External dimensions: 5.8 x 2.8 m

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 0007306, measuring range X-axis: 700 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, CRYSTA PLUS M 7106 Manual Coordinate Measuring Machine 1. 1 piece 8,500.00 8,500.00 Measuring range: X=700 Y=1000 Z=600 Length deviation of measurement: E=(4.5+0.45L/100) * High accuracy * Unlimited micro-feed capability for traversing (point acquisition) * Self-adjusting air bearings * Quiet operation with minimum air consumption * Granite measuring table * Precision glass scales * Software for MS-Windows NT/2000/XP/WIN 7 * Upgrade from MCOSMOS Manual V2 to V4 * Computer - personal computer Dcodpfszkakbox Aa Hsl * LED monitor DELL 24" * Ceramic calibration sphere for SMS - diameter 20mm

Condition: excellent (used), Year of construction: 2023, operating hours: 12 h, functionality: fully functional, machine/vehicle number: 630207349, HSM V-Press 825 Plus Pro – barely used, only 16 bales pressed For sale is an HSM V-Press 825 Plus Pro in exceptionally low-use condition. The machine has produced just 16 bales in total and is therefore practically as good as new. Dcodpeyy Ddaefx Aa Hel Ideal for businesses seeking a high-quality baler without paying the price of a new machine.

Year of construction: 2018, condition: used, Operational machine with maintenance history. Ask for additional information! Dodpfsyxfzkex Aa Hecl

Condition: used, mileage: 1,545 km, power: 368 kW (500.34 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ADR hazardous goods Coupling height: 1150 mm FROZEN WHITE - 7VTAWWA Retarder 4-bag air suspension, maintenance-free fifth wheel, FDR 2.31, ADR hazardous goods, sun visor, LED, retarder, upper bed, technology package 5 Cab paint: Frozen White Fixed co-driver's seat Without upper bed Warm air auxiliary heater Navigation system Electrohydraulic steering with three driving modes (Comfort, Balance, Direct) Wheelbase 3750 mm ADR 4-bag air suspension (rear axle) Bright dashboard Window film, 4-bag air suspension, 980 mm, LowLiner, 355/50, FDR 2.31, winter package with heated windscreen, sun visor, LED, retarder, air pressure horn, technology package 5 F-MAX F-MAX LL F-MAX L Wheelbase 3600 Fifth wheel height 980 Front overhang 1450 Rear overhang 873 Total length 5907 Total cab length 2350 Overall height 3950 Overall width (without mirrors) 2540 - 2160 78 LITER SCR TANK Fuel tank 372 liters 600 LITER MAIN TANK Ground clearance front 269 Ground clearance rear 243 ConnecTruck Cruise control Lane keeping assist Emergency brake assist Axle load indicator Electronic Stability Program (ESP) Traction control (ASR) Eco Roll Differential lock Driver's seat (premium upholstery) Auxiliary heater ConnecTruck MaxCruise (predictive cruise control) Electric cab tilt mechanism LED daytime running lights Maneuvering assistance lighting Fog lights and rear fog lights Light automation Leather steering wheel Steering wheel controls 8" instrument panel Multimedia system with 7.2" touchscreen External sun visor Roof spoiler Side spoiler Side skirts In-vehicle internet Dsdpfeyvm Ndjx Aa Hjcl

Condition: used, mileage: 1,545 km, power: 368 kW (500.34 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Mega - Ultra LowLiner Saddle height: 980 mm FROZEN WHITE - 7VTAWWA Retarder CB radio pre-installation, sun visor, LED, retarder, air horn, Technology Package 4 Cab paint: Moondust Silver Passenger seat fixed Without upper bunk Warm air parking heater Navigation system Electrohydraulic steering with three driving modes (Comfort, Balance, Direct) SAF fifth wheel, saddle height 980 mm, tires 295/60 R22.5, Bridgestone 4-bellow air suspension (rear axle) Light-colored dashboard Window film, 4-bellow air suspension, 980 mm, LowLiner, 355/50, FDR 2.31, Winter package with heated windscreen, sun visor, LED, retarder, air pressure horn, Technology Package 5 F-MAX F-MAX LL F-MAX L Wheelbase 3600 Saddle height 980 Front overhang 1450 Rear overhang 873 Total length 5907 Total cab length 2350 Overall height 3950 Overall width (without mirrors) 2540 - 2160 78 LITER SCR TANK Diesel tank 372 liters 600 LITER MAIN TANK Ground clearance front 269 Ground clearance rear 243 ConnecTruck Cruise control Lane keeping assistant Emergency brake assistant Axle load indicator Electronic Stability Program (ESP) Traction control (ASR) Eco Roll Differential lock Driver’s seat (high-quality upholstery) Parking heater ConnecTruck MaxCruise (predictive cruise control) Electric cab tilting system LED daytime running lights Maneuvering assistance lighting Fog lights and rear fog lights Automatic lighting Leather-covered steering wheel Steering wheel controls 8" instrument panel Multimedia system with 7.2" touchscreen External sun visor Roof spoiler Side skirts Side fairings Onboard internet Dcjdpfx Aasyvm Nwo Hol

Condition: excellent (used), !!!DEMO MACHINE!!! For sale: a Drechselmeister MIDI 2 Plus lathe with a center distance of approximately 400 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. (Fully functional) Technical data: - Center height approx. 178 mm / Swing diameter 355 mm - Center distance approx. 400 mm (extendable with optional bed extensions) - Speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 RPM Dcsdpfjzgr Siex Aa Hel - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) safety groove - Tailstock with interchangeable tailstock spindle 100 mm MK2, trapezoidal thread, and measuring scale! (Optional: interchangeable tailstock spindle with ER25 collet system for drilling) - Motor 1 HP (230 V) with high-quality frequency inverter - Weight approx. 53 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, turning tool, woodturning, turning, machine Reference: R-D1618

Condition: used, Siemens Connection Box PN Plus 6AV6671-5AE11-0AX0 Connection box for SIMATIC HMI panels with a PROFINET interface. Suitable for industrial operator control and visualization systems in production and automation plants. Manufacturer: Siemens Product designation: Connection Box PN Plus Article number: 6AV6671-5AE11-0AX0 Communication: PROFINET PROFINET ports: 2 Status indicators: Link and Activity for Port 1, Port 2, and the panel Supply voltage: 24 V DC Current consumption: max. 1.0 A Ambient temperature: 0 °C to +50 °C Country of manufacture: Germany Condition: used Dsdezdahhjpfx Aa Hecl Location: Kusel 6 units available

Condition: used, mileage: 18,886 km, power: 100 kW (135.96 HP), first registration: 07/2024, fuel type: diesel, overall weight: 2,800 kg, wheelbase: 3,200 mm, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), navigation system, onboard computer, parking sensors, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, JB7 Parking package with reversing camera, E1E Digital extra: hard drive navigation, EY2 Live traffic information, E7M MBUX multimedia system, QA4 Towing capacity 2500 kg, G43 9G-TRONIC, W50 Rear door, two-wing, 180 degrees without windows, E07 Hill-start assist, LA2 Headlamp assistant, MJ8 ECO Start-Stop function, XY5 Model year 5, C6L Multifunction steering wheel, JK5 Instrument cluster with color display, MS1 Cruise control, F68 Exterior mirrors, heated and electrically adjustable, V20 Interior trim, load compartment, upper panels, V30 Interior trim, load compartment, side panels, MX0 BlueEFFICIENCY package, SA6 Front passenger airbag, E1D Digital radio (DAB), SB1 Comfort driver's seat, SB2 Comfort front passenger seat, SE4 Lumbar support, front passenger seat, SE5 Lumbar support, driver's seat, VV9 Attachment points in the roof frame, D50 Solid partition, IL5 Left-hand drive, RG7 Tires 225/55 R17, RD8 Wheel covers, RF9 Tire brand Goodyear (90), F66 Lockable glove compartment, H20 Heat-insulating glass all around, LE1 Adaptive brake lights, BA3 Active Brake Assist, JB4 Active Lane Keeping Assist, JW8 ATTENTION ASSIST, EY5 Mercedes-Benz emergency call system, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, EL8 2-way speakers, front, KP7 Exhaust gas cleaning SCR generation 4, 805 AEJ X4/1, CF0 Basic chassis, IB6 Model series C447 Vito/V-Class, BB6 Brake booster failure compensation, BB7 CO2-optimized brake system, EW6 Digital extra: Remote Services Plus, B25 Electric parking brake, E57 Electrical system for trailer socket, MT5 Emission class Euro 5b+ N1, M72 Vehicle capable of using HVO, M60 Generator 14 V / 250 A, MG9 Generator management, MK8 Speed limiter 210 km/h, XG6 Weight variant 2,800 kg, J55 Seat belt warning system for front passenger, HH9 Semi-automatic TEMPMATIC climate control, KB5 Main tank 70 liters, FR1 Rear camera, not retractable, A1N Rear axle shafts, manufacturer Neapco, BH1 HOLD function, V43 Wooden floor, 502 Intelligent Speed Assistant (ISA), ZM0 Panel van, HI1 Climate zone 1 (cold/comfort), F3Z Trunk comfort closing, JH3 Communication module (LTE) for digital services, IK0 Complete vehicle, Z0Q Customer order VdZ, LC2 LED light band in the load compartment, CL1 Steering wheel adjustable in height and tilt, XO9 Mercedes-Benz MobiloVan with breakdown assistance and extended warranty, XM0 Model update Note: Dsdpfezmayzsx Aa Hecl Despite careful checking of all our price information, errors occur from time to time. These are sometimes caused by transmission errors in the systems of the various platform providers. However, errors on our part cannot be ruled out either. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. A price indication also cannot be declared as part of the contract. If you place particular emphasis on a specific feature of our advertisement, please let us know when concluding the contract. Thank you for your understanding!

Condition: ready for operation (used), Year of construction: 2016, MicroStep Master Cut Eco Plus CNC plasma cutting system with nesting software Year of manufacture: 2016 Dcjdezpf U Njpfx Aa Hsl Power source: Kjellberg HiFocus 161i Provision for retrofitting an oxy-fuel torch including Kemper filter system Maximum working area: 3000x1500mm Machine location: Hall in Tirol Immediately available

Condition: used, mileage: 45,969 km, power: 103 kW (140.04 HP), first registration: 09/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 6, Year of construction: 2020, Equipment: ABS, central locking, electronic stability program (ESP), parking heater, soot filter, Equipment: * Body/Superstructure: Panel van, double cab L2H1, * Auxiliary heater with remote control, * Passenger-side double seat with storage/compartment, * Seats in the cargo area: 1st row, 3-seater bench, * Storage Package 2, * Rear hinged doors, 270 degrees with glazing, * Rear step on the right-hand side, * Rear glazing tinted, * Cargo area partition behind the 2nd row of seats, * Sliding door on the right-hand side with intermediate locking, * Tow hitch, 3,000 kg, Technology: * Audio system Composition Audio, * SD card, MP3, Bluetools, * 2nd battery, * Marker lights on the side, * Multi-function display Plus, Safety/Environment: * Airbag, driver's side, * Driver assistance system: Hill start assist, * Driver assistance system: Crosswind assist, * Low emissions according to Euro 6d-TEMP emission standard, Dcodszpcn Tspfx Aa Hel * Start/Stop system for the engine, Other: * 1 previous owner, * Originally delivered in Germany, * Truck registration, * Engine 2.0 L - 103 kW TDI, * Wheelbase 3640 mm, * Permissible total weight 3.50 t, Please note: This VW does NOT have air conditioning! Since 1972, we have been your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen interchange. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We would be happy to accept your commercial vehicle/construction machinery in part exchange. If you would like a new TÜV (German technical inspection) inspection, we will gladly provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an additional cost. The information provided in advertisements, on the internet, price tags, and in images is non-binding and does not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 60 t, input voltage: 400 V, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Dcedpfjzl A D Hox Aa Hol We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: refurbished (used), Year of construction: 2021, HANDTMANN PVLH-228 Dedsrf S U Djpfx Aa Hjcl 2021 year The machine after capital renovation. All bearings and sealings in this machine are new. 3 months warranty for parts. New funnels and brake. Delivery time: 3 weeks. natural or artificial intestine kit to be agreed

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,497 h, construction height: 3,270 mm, power: 209 kW (284.16 HP), empty load weight: 9,450 kg, total length: 5,274 mm, construction width: 2,620 mm, Tractor Speed category: 50 Dcedpfx Ajy U A H Nsa Hjl Technical condition: good Battery condition: good

Condition: used, functionality: fully functional, mileage: 276,300 km, first registration: 06/2023, fuel type: diesel, empty load weight: 8,041 kg, overall weight: 18,000 kg, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 935 l, brakes: VEB, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 1, total length: 5,890 mm, total width: 2,518 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 12,000 kg, Year of construction: 2023, Equipment: ABS, AdBlue, Bluetooth, additional headlights, air conditioning, central locking, differential lock, electric window regulation, fog lights, fridge, navigation system, onboard computer, parking air conditioner, parking heater, second fuel tank, spoiler, VOLVO FH13.500 Globetrotter I-Save Semi-trailer tractor unit 4x2 Leaf spring suspension at the front - air suspension at the rear Differential lock Automatic transmission VEB-Plus GVWR 18,000 kg - Unladen weight 8,041 kg - Permissible total train weight 44,000 kg Overall truck length 5.89 m Wheelbase 3.70 m Sleeper cab with 1 berth Tires 40% tread ABS Euro 6 530L + 405L fuel tanks Spoiler Full fairing Dsdpfx Ajznk D Hea Hscl Sun visor Round lights Bluetooth Fog lights Central locking Air-suspended driver's seat Auxiliary air conditioning Auxiliary heater Air conditioning Navigation system Refrigerator Electric windows and exterior mirrors Radio All information is subject to change without notice / errors and omissions excepted.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, bale weight: 550 kg, Equipment: documentation/manual, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Dodpfx Aaozn Hl Te Hecl Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed