Used Minipack-Torre Modular 70 Digit + Tunnel 70 Dg for sale (22,300)

Condition: excellent (used), Cryovac model ST98 electrically heated hot water shrink tunnel. variable speed conveyor. max product width 550mm. water temp 87 degrees c. Ljdpfxszp N Rbs Abyehn

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: Lodpfezk Nmrjx Abyshn - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: used, mileage: 352,753 km, power: 240 kW (326.31 HP), first registration: 05/2007, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, maximum load weight: 7,150 kg, empty load weight: 10,850 kg, next inspection (TÜV): 06/2025, wheelbase: 3,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, cabin, differential lock, fog lights, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, traction control, * German vehicle * 1st owner * Condition: see photos * Sweeping and suction body from the premium manufacturer Bucher Schörling * Model: Optifant 70 * Separate Mercedes engine * Right side disc broom and central roller brush * Nominal capacity: 7 m³ * Debris container with V2A stainless steel floor pan * Water tank: 1,500 liters * 360° camera system * Driver’s cab with 2 seats * Air conditioning * EasyDrive (hydrostatic drive system) (SN) * Engine brake * Driver's comfort seat, air-suspended * Roof hatch * Heated seat * Reversing camera Lhedpfx Abevhqqqsyjn * Electric windows * Electrically heated mirrors * Sun visor * Rotating beacon lights * ABS and ASR * Differential lock * Leaf/air suspension with lift/lower function * Self-propelled street cleaning machine * Wheelbase: 3,200 mm * Gross vehicle weight: 18,000 kg * Unladen weight: 10,850 kg * Payload: 7,150 kg If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and assessment of the item so that the buyer has an accurate understanding of its condition and suitability. Inspections and tests are possible and explicitly encouraged at any time by appointment. All information is provided without guarantee. No liability is assumed for errors or incorrect details in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: excellent (used), Year of construction: 2020, The Canon Arizona 1360 XT is a high-productivity, mid-volume UV LED flatbed printer designed for versatile large-format graphics. It features an extra-large (XT) table and 6 colour channels for expanded application possibilities. Colour configuration: CMYK+W+W (conversion of one channel to varnish possible without cost) Manufacturing year: 2020 Mileage: 25.000m² only! Print head status: perfect Print area: 3,08x2,50 meters Roll option: not available Lhodeylwhnspfx Abyen In production, demo possible Location: Western Europe For further technical information please refer to enclosed brochure Key Specifications & Performance Media Size: Supports rigid substrates up to 2.50 x 3.08 meters (98.4 x 121.3 inches) and up to 50.8 mm (2.0 inches) thick. Print Speed: Reaches up to 52.8 m²/h in High-Key mode. Color Channels: 6 independent channels, typically configured as CMYK plus White or Varnish for high-value applications. Resolution: Uses VariaDot technology with variable drop sizes (6 to 42 picoliters) for near-photographic quality and sharp text down to 2 pt

Condition: excellent (used), Year of construction: 2016, The Océ Arizona 2280 XT is an 8-channel UV flatbed printer with Océ VariaDot grayscale imaging technology, a maximum printing area of 49.2" x 98.4" (1.25 m x 2.50 m) on rigid media, a maximum media thickness of 2" (50.8 mm), and a speed of up to 691 ft²/hr (64 m²/hr) in express mode. It offers flexible media printing via an optional Roll Media Option (RMO), supports white ink and varnish, and can print 2-point text in its High Definition mode. Price includes decommissioning and loading on truck on original boxes (to be returned) Mileage: 60.000m² Manufacturing Year: 2016 Ledpfxjyly Ids Abyjhn Roll to roll option included Colour configuration: CMYK Lc Lm 2W (possible to convert one channel to varnish) Location: Western Europe RIP onyx included In production, demo possible Key Specifications Model: Océ Arizona 2280 XT Ink System: 8-channel piezoelectric inkjet system using Océ VariaDot grayscale imaging technology Ink Technology: 6 to 42 picoliter droplets with two printheads per color Printing Modes: Near-photographic, High Definition, Production, and Quality modes Rigid Media Size: 49.2" x 98.4" (1.25 m x 2.50 m) Maximum Media Thickness: 2" (50.8 mm) Optional Roll Media Option (RMO): Available for flexible media printing Print Speeds (Express Mode): Up to 691 ft²/hr (64 m²/hr) Ink Options: Standard CMYK, Light Cyan, Light Magenta, White UV ink, and Clear Varnish Text Quality: Legible text as small as 2 pt. in High Definition mode Imaging Technology: Océ VariaDot grayscale imaging, enabling variable ink droplet sizes For further technical information please refer to enclosed brochure

Condition: excellent (used), overall weight: 17 kg, jaw width: 125 mm, total length: 345 mm, clamping length: 150 mm, Modular vise, jaw width 125mm Lhjdpfx Abexmk I Njyon Gerardi Modular 125 Robust machine vise, drill press vise Overall length approx. 345mm Clamping range approx. 150mm Jaw width 125mm with pull-down jaws Additional prism jaw included Mechanical clamping operation using 19mm wrench or ratchet The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse—see "other offers from this supplier."

Condition: new, number 70 Positionen weight 90 kg condition neu 28 mm Special set 70 / 28 70-piece, 28mm system, consisting of: 3x Pipe clamps D28 90° – Item No. 4028397 3x Pipe clamps D28 180° – Item No. 4028396 3x Pipe clamps D28 45° – Item No. 4028398 3x Pipe clamps D28 300x150 – Item No. 4028399 Lsdpfx Abowth N Tsyjhn 3x Pipe clamps D28 300x200 – Item No. 4028400 15x Ball lock pins D28x50 – Item No. 4027663 10x Locking pins D28x80 – Item No. 4028876 4x Universal Stop D28 100x50x25 mm – Item No. 4028469 4x Universal Stop D28 150x50x25 mm – Item No. 4028470 4x Universal Stop D28 225x50x25 mm – Item No. 4027657 2x Universal Stop D28 300x50x25 mm – Item No. 4027659 2x Stop Clamping Angle D28 75x50x75x25 mm – Item No. 4028657 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028658 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028649 2x Stop Clamping Angle D28 175x50x75x25 mm – Item No. 4028652 2x Stop Clamping Angle D28 175x50x175x25 mm – Item No. 4028653 2x Stop Clamping Angle D28 275x50x175x25 mm – Item No. 4028654 2x Stop Clamping Angle D28 300 x 275 x 100 mm (1x left, 1x right) – Item No. 4028847 2x flat angle D28 175x175x25 mm 1x elongated hole + 3x round hole – item no. 4028655

Condition: excellent (used), Digital display Make Heidenhain Type Positip 850 Lhedjvx Nkdjpfx Abysn Stock number (28595) The display is used and has been tested. Please note that the uneven coloring is due to poor photography.

Condition: good (used), Year of construction: 2019, The Durst Rho 312R is an industrial-grade, 3.2-meter roll-to-roll UV inkjet printer optimized for high-volume production of backlits, fine art prints, POP displays, and outdoor advertising. Manufacturing Year: 2019 Double side print option Colour configuration: 4 colors Mileage: 220.000m² only! In production Printhead status: some slots must be replaced Demo possible Lhjdpfez Hw Iaex Abyen Location: Western Europe For further technical information please refer to attached brochure. Productivity & Speed • Maximum Output: Up to 240 m²/h to 274 m²/h in standard high-speed modes. • Boost Mode (Plus Variant): Up to 305 m²/h. • Production Mode: Roughly 128 m²/h to 130 m²/h. • Multi-Roll Printing: Supports simultaneous printing on two 1.6-meter rolls with independent queues

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 516342V00017, Year of construction: 2019, operating hours: 13,119 h, load capacity: 7,000 kg, lifting height: 3,520 mm, fuel type: electric, mast type: duplex, fork length: 2,400 mm, TECHNICAL DETAILS Lifting capacity: 7,000 kg Lodsz D Urkspfx Abyshn Lifting height: 3,520 mm Fork length: 2,400 mm Maximum fork width: 1,930 mm Minimum fork width: 560 mm Number of wheels: 6 MACHINE DETAILS Mast type: Duplex Fuel type: Electric Battery brand/type: Still Battery year of manufacture: 2019 Battery voltage: 80 V Battery capacity: 1,240 Ah Battery test result: 65% Operating hours: 13,119 h Dimensions & Weight Dimensions (L x W x H): 3,750 x 2,000 x 2,920 mm Shipping weight: 12,414 kg Number of shipping packages: 1 EQUIPMENT Side shift 4-way fork spreader Work lights Full cabin Heater Documentation CE marking

Condition: used, Year of construction: 2004, Technical details: Lhsdjvb Hlwepfx Abyen faceplate diameter: 4770 mm swing diameter: 7000 mm turning height: 1000 mm slide stroke: 1000 mm workpiece weight max.: 100000 kg faceplate turning speed range: 2 - 20 U/min feed speeds: 1 - 10000 mm/min rapid traverse: 10 m/min ram head dimension: 250 x 250 mm main drive: 100 kW total power requirement: 200 kW with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment *

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Lhodpsz Nxwcofx Abyjn Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Condition: good (used), Year of construction: 2000, Ref. -No.: 10588 Manufacturer: HEDELIUS Type: CB 70 - 3200 Year of construction: 2000 Type of control: CNC-Steuerung Control: Heidenhain TNC Storage location: Halberstadt Country of origin: Germany Machine-No.: 0032XXXX Space requirement: 7200 x 3400 x 3100 Length x width x height (mm) Lodezc D Atspfx Abyshn X-Travel: 3200 mm Y-Travel: 720 mm Z-Travel: 600 mm Table Height: 900 mm Number of T-slots: 5 Max. Workpiece Weight: 3000 kg Max. Tool Length: 330 mm Clamping Area: 3900 x 650 mm T - groove width: 18 mm T - slot spacing: 125 mm Tool Taper: DIN 69871 AD 40 Spindle Speed: 30 - 8000 RPM Max. Torque: 102 x 240 Nm Feed Speeds X/Y/Z Axis: 30000 mm / min Rapid Travel X/Y/Z: 30 / 30 / 30 mm / min Total Power Requirement: 50 kW Borehole Diameter: 28 x 44 mm Max. Feed force: 9000 / 9000 / 9000 kN Distance between spindle nose and table: 140 - 740 mm Number of tools: 30 Pcs Tool clamping: Tellerfeder Max. milling capacity: 400 x 600 Max. thread diameter: M20 x M30 mm coolant: 250 bar Further information: - L = 7.50 m Special accessory: automatic door - H = 3.60 m Special accessory: full cladding of working area - Ø 125 mm only with free side spaces 35 mm The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 2022, * CAT G 324 sorting grapple G 324 * Year of manufacture: 2022 * Weight: 1,787 kg * Connection: Oil Quick OQ 70-55 * Weight: 295 kg * Total weight: 2,082 kg Ledpfez Si D Tsx Abyohn * Width: 1.1 m * More pictures and videos available via WhatsApp * Specifications subject to change without notice and prior sale.

Condition: new, power: 154 kW (209.38 HP), fuel type: diesel, number of seats: 28, gearing type: automatic, color: white, brakes: retarder, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Iveco Daily City, new vehicle with COC; also available with CNG engine, Telma retarder Permissible total weight: 7,200 kg - Iveco Daily Urbano - City/Intercity bus built on Iveco C70 chassis - Air-suspended rear axle - Telma retarder - Length: 8.40 meters, Width: 2.40 meters, Height: 3.16 meters - Body made of fiberglass - Ribbed frame construction made of galvanized steel - Front air conditioning - Diavia air conditioning in passenger compartment 'Madrid' 15 kW (thus, dual A/C) - Double glazing - Twin-width rear doors in low-floor section (electric operation) - Front single electric door with recessed entrance - Entry height front and rear max. 300 mm (without kneeling function) - Total capacity: 34 persons (24 seats — sleeper seats or city bus seats possible — plus 10 standing spaces, including 4 folding seats) - Wheelchair/pram bay - Convector heating in passenger area Lodpozyvp Sofx Abyehn - Iveco auxiliary heater with water and timer - Interior lighting white/orange or white/blue - Grab rails with hand straps - 2 side luggage compartments + spare wheel hatch - Exterior color: white - Optional: LED headlights, custom paintwork, destination signs, interior monitor, WiFi, etc. available - ... Vehicle is eligible for subsidies in most German states and complies with Section 30d (4) StVZO This is an example vehicle. It is not in stock. Delivery time is approximately 6 months. Low-floor rear starting from €164,990.00. School bus variants available from €149,990.00.

Condition: good (used), Code: 0028 Brand: OMG Model: EPM/70 Automatic slotting machine for blinds Lhedpfx Aboz N A T Ijyen Technical data Spindle connection mm 10 Drill speed 12000 rpm Simultaneous machining of 2 sections 18 possible pitches with a single toothed rod Slots depth up to 25 mm Drill motor Hp 1,5 Slide motor Hp 1 Up to 20 slots / minute Inclination from from 90 degrees (vertical) to 0 degrees (horizontal) Max section dimensions mm 100 x 120 Automatic stop Overall dimensions: machine mm 1500 x 1000 x 1200 h - kg 490 - Rack mm 3200 x 100 x 200 h - kg 30

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Lodpfoyr Aiwsx Abyehn Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: used, Year of construction: 2005, operating hours: 40,000 h, clamping force: 25 kN, displacement volume: 230 cm³, injection pressure: 2,500 bar, overall weight: 2,500 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz delivery time: on request Lhedpfx Absynbcnoyjn terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2013, operating hours: 55,929 h, clamping force: 160 kN, displacement volume: 23 cm³, injection pressure: 2,500 bar, overall weight: 6,000 kg, screw conveyor diameter: 18 mm, terms of delivery: FCA Pegnitz Ljdpfjzp R I Isx Abyohn delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2009, type of input current: three-phase, total height: 2,150 mm, total length: 2,710 mm, total width: 1,200 mm, overall weight: 2,300 kg, cutting range round steel at 90°: 360 mm, feed length X-axis: 2,600 mm, opening width: 400 mm, saw band length: 5,730 mm, saw band width: 34 mm, saw drive: 3,000 W, working height: 720 mm, For sale is a fully automatic horizontal metal bandsaw from the manufacturer Kaltenbach, model KBS 400 DG-NA, manufactured in 2009. The machine is suitable for sawing steel, cast iron, non-ferrous metals, as well as pipes, profiles, and solid material. The automatic material feed and hydraulic workpiece clamping enable efficient and precise series production. The cutting speed and hydraulic saw feed are continuously adjustable. Miter cuts are also possible. Technical data: Lhodpfx Aezmf Uqsbysn Manufacturer: Kaltenbach Model: KBS 400 DG-NA Year of manufacture: 2009 Machine number: 305285 Cutting range, round, at 90°: 360 mm Cutting range at 90°: 400 × 350 mm Cutting range at 45°: 280 × 350 mm Saw band dimensions: 5,730 × 34 × 1.1 mm Cutting speed: 15 to 90 m/min Working feed: continuously adjustable up to 400 mm/min Feed length per single stroke: 2,600 mm Saw drive: 3 kW Working height: 720 mm Dimensions: approx. 2,710 × 1,200 × 2,150 mm Weight: approx. 2,300 kg

Condition: used, mileage: 294,750 km, power: 132 kW (179.47 HP), first registration: 01/2021, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Storage compartment on the dashboard with USB port, audio system: digital audio system (DAB) with USB and Bluetooth hands-free system, audio/telephone controls on the steering wheel, body manufacturer interface, rear differential lock, programmable speed limiter system, automatic climate control, cooling compressor 170 ccm, steering column (steering wheel) adjustable in height/length, switch for lighting in the cargo area, end cross member at the frame end, front mud flaps Additional equipment: Airbag on driver's side, trailer stabilization program (TSM), trailer socket preparation, drive slip control (ASR), version: C-series, exterior mirrors electrically adjustable and heated, long exterior mirrors, for vehicle width 2350 mm, electronic brake force distribution, driver assistance system: emergency braking assistant AEBS + City Brake, digital tachograph, front axle suspension: torsion bar spring, windshield and side windows tinted, generator 210 A, speed limiter system 90 km/h, grab handle A-pillar, urea tank (AdBlue): 20 liters, body/superstructure: standard platform, fuel tank: 90 liters, engine 3.0 liters - 132 kW diesel, wheelbase 5100 mm, spare wheel in driving condition, spare wheel holder between the floor longitudinal members, low emission according to emission standard Euro 6d, seats in the cab: double passenger seat, seats in the cab: driver's comfort seat (hydraulic), maintenance indicator, permissible total weight 7.00 t, twin tires on 2nd axle / rear axle. Lhedpfx Ajz D Ruusbyen

Year of construction: 2026, condition: new, functionality: fully functional, COLUMBUS PIONEER – Modular Vacuum & Membrane Press with Lifetime Guarantee The COLUMBUS Pioneer is the professional solution for joineries and woodworking shops looking to produce flexibly and invest securely for the long term. Ideal for: * Veneering * Form gluing * Laminating * Thermoforming * Solid surface materials * Curved workpieces Your benefits: * Modular system – can be expanded at any time * Lifetime guarantee on the machine frame * Robust industrial construction * Columbus 360° included: Master Manual + AI support * Premium components from BECKER, FESTO, and SIEMENS * Simple operation and high reliability Lhedsz Izrfspfx Abyon Features: * Quick-change membrane system * Natural rubber membrane rated up to +130 °C * Adjustable vacuum pressure from 400–900 mbar * Connection for external vacuum bag * Sturdy phenolic resin work surface * Smooth-running swivel casters Available sizes: * L: 3,050 x 1,350 mm * XL: 4,050 x 1,350 mm * XXL: 4,050 x 1,700 mm COLUMBUS has been developing vacuum technology for professional users for 50 years. Viewing and consultation available by appointment.

Condition: excellent (used), Year of construction: 2018, The Canon Arizona 1260 XT is a high-productivity, mid-volume UV LED flatbed printer designed for versatile large-format graphics. It features an extra-large (XT) table and 6 colour channels for expanded application possibilities. The Roll Media Option (RMO) for the Canon Arizona 1260 XT is a modular add-on unit that expands the capabilities of the true flatbed printer. While the XT model is primary engineered for large-format rigid media, the RMO bolts onto the machine to seamlessly handle flexible, roll-fed substrates Lhsdpoz E Nvmefx Abyjn Colour configuration: CMYK+W+W (conversion of one channel to varnish possible without cost) Manufacturing year: October 2017 Mileage: 25.000m² ONLY!!!!! Print head status: NEW HEADS!!!!! Print area: 3,08x2,50 meters Roll option: Availavle In production, demo possible Location: Western Europe For further technical information please refer to enclosed brochure Key Specifications & Performance Media Size: Supports rigid substrates up to 2.50 x 3.08 meters (98.4 x 121.3 inches) and up to 50.8 mm (2.0 inches) thick. Print Speed: Reaches up to 52.8 m²/h in High-Key mode. Color Channels: 6 independent channels, typically configured as CMYK plus White or Varnish for high-value applications. Resolution: Uses VariaDot technology with variable drop sizes (6 to 42 picoliters) for near-photographic quality and sharp text down to 2 pt

Condition: used, Year of construction: 2016, operating hours: 3,318 h, Equipment: all wheel drive, * Enclosed cabin * Quick-change system * Bucket * Fork * Rotating beacon Lhsdpfxsz E Uhuo Abyjn ----Vehicle number: 12486----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle transportation, vehicle registration, recovery and vehicle transport.----?YOUR VTS TEAM

Condition: used, Year of construction: 2016, operating hours: 3,454 h, Equipment: all wheel drive, * enclosed cab * quick-change coupling * bucket * forks * rotating beacon ----Vehicle number: 12487----Errors and prior sale excepted----Advertisements and various markings have been digitally removed.----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of everything. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export handling, arrangement of financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transportation. ?YOUR VTS TEAM Ledpfx Abjz E Uiljyjhn