Used Mfl Ste 100-65 for sale (37,605)

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Material of construction: 316 Stainless Steel Width: 350 mm Horsepower: 1.5 kW Length: 1,000 mm Jacket: No Type Of Ribbon: Single Bodpfjzfh U Djx Akwewp

Condition: used, Year of construction: 2021, Used MOC cleaning system, type Cleaning System 100. Continuous degreasing system for use with aqueous cleaning agents or emulsions. The machine is powered and can be inspected by appointment! Technical data: Year of manufacture: 12/2021 Manufacturer: MOC External dimensions: Length, max.: 1,500 mm Width: 1,500 mm Overall height: 1,700 mm Infeed height: 900 mm Usable size: Width: 650 mm Height: 300 mm Belt design: wire mesh in stainless steel Energy data: per station Power: 2 kW Pressure, max.: 3 bar Caustic solution flow rate: 7.5 m³/h Transport drive: 0.5 kW Max. load: 20 kg/m Speed: 1.4 m/min, adjustable with oscillation Tank volume: approx. 500 l Heating: 18 kW Connected load: approx. 25 kW Material: Stainless steel 1.4301, all parts in contact with the medium or corrosion-resistant Bwsdpfxezicl Es Akwjp Special features: Cabin structure: in a robust steel construction and with all necessary inlet and outlet connections including a 100 µm filter in the return line and sludge collection rings with drain and overflow 1 heating unit with thermostat, electric 1 complete pumping unit, piped Pump with base plate and motor 1 set of nozzles 1 set of PVC aprons, easily removable 1 drain per tank with manual ball valve 1 blow-off station with on-site compressed air, flat jet nozzles and air ducting Electrical control cabinet The control cabinet contains all contactors and fuses with VPS control

Condition: good (used), Steady rest universal swing Ø 100 Bjdpfx Aezdirdokwswp Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, - Dimensions: 1370x190x2000 mm - Capacity: 100 trays - Weight: 109 kg - The steam sensors are designed to be connected to the exhaust of your oven and not to the outlet of the hood, then routed to a drain. - The drain must be connected at the bottom section. Bsdpfjy Hrf Esx Akwjwp - The steam radiators do not operate with the hood suction system. - There is no fan connection.

Year of construction: 2026, condition: as good as new (ex-display), IMMEDIATELY AVAILABLE!!!! Manual cleaning is performed using special gloves in the front area. The effectiveness of the cleaning is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60 °C can be set for the cleaning fluid. The pressure can be adjusted from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optional up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Standard version: • Blower gun inside • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Top-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with support from gas springs • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) Bwsdjf A D Nmspfx Akwop • External mini-pneumatic oil separator

Condition: used, Year of construction: 1992, Unloading system Polar TR ER 100-3 (1992) Year: 1992 Bwjdpfx Akjuliw Tjwep Description - On the right side of the guillotine

Condition: refurbished (used), 100,000 liter buffer tank / pressure vessel, standing on a stand ring Vessel data: Volume: approx. 100,000 liters Operating pressure: max. 2 bar Operating temperature: max. 90°C Inner diameter: 3,000 mm Total height with feet: approx. 16,750 mm Ground clearance: approx. 800 mm Bwodpfx Aewf N Stokwep Vessel with dished ends. Tank Equipment: ⦁ 1 DN 600 manhole with blind cover ⦁ 7x 3/8" pipes, closed inside the tank, open outside ⦁ 2 lifting eyes in the shell area ⦁ 2 lifting eyes on the top of the tank ⦁ 2 lifting eyes on the tank feet ⦁ 1 2" drain, connected to the side of the shell with a ball valve ⦁ 1 Ø33.7 x 3.6 mm vent, connected to the side of the tank and down outside the insulation, with a ball valve ⦁ 1 DN 125 connection, ending in a flange on the outside, and connected to the center of the tank with a 90° bend ⦁ 1 DN 125 connection, ending in a flange on the outside, connected to the top of the tank and connected to the center of the tank via 2x 90° bends We are happy to offer the new tank insulation in any thickness upon request. Please contact us if you are interested!

Year of construction: 2026, condition: new, Pasteurizing bath is suitable for the heat treatment of packaged fruit preparations (jam, wafers, herbs) or fermented preparations (vinegar, beer) and pickles. The packaging must be heat resistant as a glass or heat resistant plastic bag. The heat treatment technology is characterized by warming and holding, accurate temperature values and heat retention time by the product being treated and the user needs to know that the equipment only warms the treatment water and keeps it at the set temperature. Specifications: - Performance: 100 L/cycle - Electric demands: 9 kW, 400 V, 32 A, triphase - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 500x1100x900 mm - Weight: 75 kg - IP65 certified electronics - Heat exchanger: soft water - Thermometers: 1 pcs - Automatic heat control, very easy to clean. Bwedpfxed Aq Ife Akwjp - With 4pcs vibration-free feet. It requires minimal maintenance.

Condition: excellent (used), CTS 3G C 400* - Superheated water boiler with manual wood waste feeding Thermal output: 400,000 kcal/h. Pressure: 4 bar. Superheated water temperature: 150°C. Control thermostat, safety thermostat, thermometer. Fuel: wood waste Smoke exhaust: cyclone, forced-draught fan, connecting ductwork Steaming chamber net capacity: 100 m³/batch DVK-I 100 m³ - 1 unit, 8.5 x 9 m x h 4.3 m Control system: Baschild Italy Sliding door Oxyvent overpressure system Bwedpfxow Ev Twj Akwsp Stainless steel tanks and radiators on 3 sides Includes turnkey connections from boiler to steaming chamber and a complete boiler room with distributor, collector, pumps, expansion vessel, etc.

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 140 x 60 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 7.10 kg Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch Bjdewl Ncfjpfx Akwswp General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Scope of delivery includes: 01x deep beam, used Material color: RAL 5001 blue Total length: approx. 1,112 mm Inner length: approx. 1,103 mm for frame depth: approx. 1,100 mm clear support span: approx. 999 mm Profile dimensions: K 50 x 50 x 4 mm Beam support width: approx. 53 mm Unit weight: approx. 2.52 kg Bwedpjwwviijfx Akwep Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transport or shipping beyond this is associated with additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), Scope of delivery includes: 01x deep beam, used Material colour: black Total length: approx. 1,111 mm Internal length: approx. 1,103 mm for upright depth: approx. 1,100 mm Clear support width: approx. 1,000 mm Profile dimensions: K 140 x 50 x 4 mm Cross member bearing: approx. 52 mm Unit weight: approx. 7.26 kg Your contacts in our company: Bsdpfx Aswwuchekwowp Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply; these can be requested from us separately depending on delivery location or scope of supply.

Condition: good (used), total width: 400 mm, total height: 285 mm, total length: 600 mm, 100 x folding crate used Manufacturer Bekuplast Color: Red Material: Polypropylene Outer dimensions: approx. 600x400x285 mm (LxWxH) Internal dimensions: approx. 555x360x272 mm (LxWxH) Bwedpfx Aksvcpc Iowep Quantity: to choose from Height folded: 65 mm Stack height: 55 mm Handles: Front side open / long side closed Weight: 2.93 kg per piece Base with ribbed honeycomb structure Water drainage holes on the base

Condition: good (used), overall weight: 350 kg, Manufacturer Bekuplast Color: Grey Material: Polypropylene External dimensions: approx. 600x400x400 mm (LxWxH) Internal dimensions: approx. 555x360x385 mm (LxWxH) Bwsdpfx Aevb Hviskwsp Quantity: 100 pieces Height when folded: 85 mm Stack height: 75 mm Handles: Front side open / long side closed Weight: 3.41 kg per piece Base with ribbed honeycomb structure Water drainage holes on the base

Condition: good (used), AFOS Defroster Model T1000 Defrost Twin Chamber Fully stainless steel Bwodox Ey Ufopfx Akwjp Complete with refrigerator unit 400 v / 80 amps

Condition: excellent (used), For sale: Electric chain hoist from the renowned manufacturer Yale, model CPVF 10-8 NE. The device is in very good technical condition and is equipped with a Magnetek radio remote control system (transmitter + receiver). Technical data: • Model: CPVF 10-8 NE • Lifting capacity: 1000 kg Bsdoyrh I Ejpfx Akwowp • Year of manufacture: 2019 • Power supply: 400V / 3-phase • Lifting speed: 2 / 8 m/min • Control: radio remote control • Condition: very good, normal signs of use

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university and has seen very little use. All cables and hoses in the wet area have been replaced. It has extremely few operating hours. Since we specialize in Karstens round grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical data: Center distance: 1000 mm Center height: 180 mm Workpiece weight: 70 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm Bedpfxoh Rit Eo Akwjwp Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill travel 45 mm Tailstock rest next to the Z-axis table Quill force: 200-600 N Table tilt: 12.5 degrees Adjustable travel of the feed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3500 kg Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle stock for quick and safe positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic working cycle, feed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, mym feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with continuously adjustable drive for both rotating and lockable spindle. Feed control for longitudinal grinding and face grinding, input for retraction, feed amounts, feeds, dwell times, clearance strokes Digital display for X-axis from Heidenhain Paper band filter system can be offered upon request. Similar to Weiss/EMAG/GP round grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat .

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Hib Akzent 1000 Model T1060-8 Welding Tongs Control Bedpfx Aksxmuzmswjwp Very good used condition, fully functional. Item location: 75053 Gondelsheim See pictures Shipping by freight carrier or collection

Year of construction: 1999, condition: excellent (used), WIDE BELT GRINDER, 2 UNITS: CONTACT CYLINDER AND GRINDING WHEEL CYLINDER, HORIZONTAL GRINDER, CONTACT CYLINDER MOTOR 15 kW, GRINDING WHEEL CYLINDER MOTOR 7.5 kW, CONTINUOUSLY VARIABLE FEED RATE CONTROL. Bwsdjgrdx Uepfx Akwop

Condition: used, Stainless steel tank 100m3 Bedpfoxtmy Uox Akwewp Diameter 4m Total height 8.25m

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, 1 x Loma Systems bulk metal detector with alarm and stop on detect reject system. Stainless steel frame mounted on height-adjustable feet. Model - IQ3. Serial number - MD308-17641D. Aperture dimensions - 650mm wide x 350mm high (315mm clearance). Belt type - modular plastic. Belt dimensions - 2000mm long x 500mm wide. Electrical requirements - 230 V / 50 hz / 1 phase. Bwsdszgwt Sjpfx Akwop

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: T40065, MACHINE SPECIFICATION Maximum swing 510mm Maximum turned diameter 290mm Maximum turning length 540mm Bed inclination 60 degrees Spindle centre height (from floor) 960mm Bwjdpfxeq Atxyj Akwep Spindle nose A2-6 Power chucking system Hydraulic Spindle bore 77.5mm Bar capacity - collet 66mm Maximum spindle speed 5000rpm Spindle motor power 22kW Rapid travers : Z/X Axis 30/25m/min Turret: Tooling type VDI 40 Number of tooling stations 12 Number of driven tool stations 6 Maximum rpm of driven tool 4000rpm Maximum power of driven tool 3.7kW Maximum collet size of driven tool 20mm C axis increment: Fully programmable 0.001 degrees Approximate net weight 4550Kg Machine Equipped with Fanuc 21i-T CNC Control System Hydraulic 3 jaw chuck 3 off Radial driven toolholders 3 off Axial driven toolholders 30 off Static toolholders Coolant system Lighting Interlocked guarding  

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Bsdpfx Akszil T Sjwowp Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: used, For sale is a high-quality 3D CNC coordinate measuring machine from the renowned manufacturer Werth Messtechnik – model Scope-Check 650×750×500/MB/Z. This device stands out for its precision, reliability, and versatility in industrial metrology. Features & Equipment: - CNC-controlled 3D coordinate measuring machine - Multi-sensor capable (optical and tactile measurements possible) - Moving-bridge design (MB/Z) for high stability and flexibility - High precision measurement of complex workpieces - Robust construction, designed for continuous industrial use - Suitable for quality control, production monitoring, and R&D applications Additional Equipment – Renishaw TP200 Probe System: The high-precision, touch-trigger Renishaw TP200 probe is ideal for workpieces with tight tolerances and complex geometries. It allows for quick probe change-outs and precise measurements even with long probe styli. Key Features: - Strain gauge technology: Minimizes deflections are registered with high accuracy; typical errors such as “lobing” are avoided - High precision: Repeatability up to 0.4 μm, 2D probing uncertainty ±0.8 μm - Fast changeover: Automatic probe change with SCR200 rack, no recalibration required - Durability: Probe module lifetime exceeds 10 million triggerings - Flexibility: Standard- (SF) and low-force (LF) modules for sensitive materials - Compatibility: Usable with Renishaw PH10 probe heads and extensions up to 300 mm Technical Specifications (excerpt): - Connection: M8 connector, PI200 interface - Probing directions: 6-way (+X, -X, +Y, -Y, +Z, -Z) - Probing force XY: 0.02 N, Z: 0.07 N - Overtravel force XY: up to 0.4 N, Z: up to 4.9 N - Weight (sensor + module): 22 g - Stylus threads: M2 Technical Data: - Manufacturer: Werth Messtechnik - Model: Scope-Check 650×750×500/MB/Z - Measuring range: X = 650 mm, Y = 750 mm, Z = 500 mm - Supply voltage: 115–230 V AC - Power consumption: max. 10 A Scope of Supply: - Werth Scope-Check 650×750×500/MB/Z - Renishaw TP200 probe system including probe modules - Accessories as shown in the attached images Important note: "The table shown in the photos is not included in the sale." Bsdpfx Ajzii Dzskwewp (Specifications and technical details subject to change and errors!) We are happy to answer further questions by phone.

Year of construction: 2019, condition: excellent (used), Weiss Technik SaltEvent SC 1000 Salt Spray Chamber Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Machine type: Salt spray chamber / corrosion testing device Size: 1000 liters For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. This device is suitable for salt spray tests, corrosion tests, condensation water tests, material tests, surface tests, as well as applications in quality assurance, research, and development. Technical data: Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A, slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Test chamber / load: Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Storage surface, machine part cover: 5 kg Temperature and test data: Temperature range, salt spray test: Ambient temperature +5 K to +50 °C Temperature range, condensation water test: Ambient temperature +5 K to +42 °C Temperature, compressed air humidifier: Ambient temperature +5 K to +70 °C Temporal temperature constancy: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment: S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking mechanism Temperature monitoring Interface Documentation as shown in the pictures Connections: Power connection 230 V / 50 Hz Compressed air connection Connection for demineralized water Exhaust connection Water drain / condensate drain Application areas: Salt spray test Corrosion test Condensation water test Material test Surface test Coating test Automotive Quality assurance Research and development Condition: Used Functional testing performed before delivery. Optical condition as shown in the pictures. Scope of supply: Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Documentation as shown in the pictures Accessories as shown in the pictures Bwedpfx Ajzg Er Askwop Scope of supply as shown in the pictures. Subject to changes, errors, and prior sale.