Used Metabo Tba 1018D Edge Sander for sale (4,911)

Condition: ready for operation (used), HELD E90 Edge Grinding Machine Gkjdpfjztctkex Aafea -Motor power: 1.1 kW -Speed: 8,400 rpm -Support/stop surface: 800 x 50 mm -Support length: 500 mm -Footprint: 550 x 500 mm -Suitable for deburring -Suitable for breaking edges -Suitable for chamfering Dimensions: L x W x H 0.5 x 1.0 x 1.0 meters / Weight 100 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch Gkedpjztpw Nefx Aafoa - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 4607269, total width: 2,100 mm, total height: 2,400 mm, total length: 2,830 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 2,850 kg, grinding height: 160 mm, power: 22 kW (29.91 HP), height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 20,500 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, grinding belt width: 1,380 mm, table height adjustment: 157 mm, power of feed motor: 1,500 W, input frequency: 50 Hz, air demand: 1 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 1,350 mm, pass-through height: 160 mm, 🪵 2002 Viet Challenge 223 Wide Belt Sander – Heavy-Duty Finishing, Very Good Condition Take your wood finishing to the next level with this 2002 Viet Challenge 223 Wide Belt Sander – a high-performance sanding solution for woodworking professionals. Built in Italy for precision and durability, the Viet Challenge 223 is trusted by cabinetmakers, joiners, and production workshops across Europe. Now available in very good condition, this twin-head sander offers consistent results on solid wood, veneered panels, and composite materials – ideal for both calibration and fine finishing. ✅ Key Features – Viet Challenge 223/20 Year of Manufacture: 2002 Condition: Very good – clean, well-maintained, fully operational Sanding Heads: 2 (roughing + finishing) Working Width: 1,350 mm Working Thickness: 3 – 160 mm Minimum Workpiece Length: Approx. 400 mm Abrasive Belt Dimensions: 1,380 mm x 2,620 mm Main Motor Power: 11 kW + 11 kW (approx.) Feed Speed: Variable, 3.7 to 20.5 m/min Powered Height Adjustment Emergency Stop and Safety Features Feed Motor: 1.5kW Lifting Motor: 0.37kW Suction Speed: 25m/s Compressed Air: 6 bar Godpfx Aajwnr A Hsfoka Air Consumption: 17 l/min Machine Dimensions: 2830 x 2100 x 2400mm Machine Weight: 2850kg 🧱 Ideal For: Solid wood panel calibration Veneered panel sanding MDF and composite board finishing Flat panel furniture components General wood surface preparation and finishing 📦 Machine Includes: Viet Challenge 223 main sanding unit Twin sanding heads for combined roughing & fine finish Integrated feed table and dust extraction ports Original manuals and safety guards Fully tested and ready for operation 📍 Availability & Delivery This machine is in stock and available for immediate inspection and delivery. Shipping support available throughout Ireland, UK, and Europe. 📞 Enquire Now Looking for a dependable wide belt sander with professional-grade features? This Viet Challenge 223 is a rare find at this price and condition. Viet Challenge 223 Wide Belt Sander for sale Used wide belt sander in very good condition Heavy-duty industrial sander for woodworking Woodworking sanding machine for panels Twin-head wide belt sander for solid wood Viet wide belt sander UK / Ireland / Europe Wide belt sander for furniture and cabinetry production

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, workpiece weight (max.): 40 kg, input voltage: 220 V, type of input current: AC, laser power: 60 W, type of cooling: air, total width: 1,055 mm, total height: 967 mm, total length: 834 mm, overall weight: 102 kg, sheet thickness aluminum (max.): 254 mm, scan area length: 610 mm, scan area width: 610 mm, table length: 610 mm, table width: 610 mm, laser wavelength: 700 nm, extraction nozzle diameter: 100 mm, Equipment: cabin, 2022 Epilog Fusion Edge 24 – 60W CO₂ Laser Cutter & Engraver 2022 Epilog Fusion Edge 24 CO₂ laser engraving and cutting machine with 60W laser, IRIS™ camera positioning, BOFA AD Oracle extraction, air assist pump and Photo Laser Plus software. Very lightly used, professional-grade laser cutter for wood, acrylic, leather, plastics and more. Description Professional Laser Engraving & Cutting System – Very Lightly Used The Fusion Edge 24 is one of Epilog’s most advanced compact laser systems, combining industrial motion control, high-speed engraving technology, and intuitive operation. It is ideal for sign makers, workshops, educational facilities, makerspaces, and manufacturing businesses requiring precise engraving and cutting capabilities. Machine Overview Manufacturer: Epilog Laser Model: Fusion Edge 24 Year: 2022 Laser Type: CO₂ Laser Power: 60 Watt Power Supply: 220V Condition: Excellent – Very Lightly Used Included Equipment The sale includes a complete turnkey laser engraving system: Epilog Fusion Edge 24 – 60 Watt CO₂ Laser Engraver/Cutter BOFA AD Oracle Industrial Fume Extraction Unit Air Assist Pump / Compressor Photo Laser Plus Software Hose kit for extraction system All original components supplied from new Key Features *High-Speed Laser Engraving Gksdpfx Aajyug Rqofea The Fusion Edge series delivers engraving speeds up to 120 IPS (3.05 m/s) with 5G acceleration, enabling rapid production without sacrificing precision. *IRIS™ Camera Positioning System Integrated dual overhead cameras provide a live view of the work area, allowing accurate placement of artwork directly on materials and reducing setup time. *Touchscreen Control Interface The system includes a 7-inch touchscreen display for easy job selection, autofocus control, and job trace positioning directly at the machine. *Industrial Motion Control Brushless DC servo motors Ground and polished stainless steel linear motion system Teflon-coated bearings for smooth operation *Network Connectivity The Fusion Edge supports Ethernet, USB, and wireless networking, enabling easy integration into production workflows. *Radiance™ Beam Optics Advanced beam control technology delivers high resolution engraving across the entire work table. Technical Specifications Maximum Engraving Speed: 120 IPS (3.05 m/s) Acceleration: 5G Work Area: 24" × 24" (610 × 610 mm) Maximum Material Thickness: 10" (254 mm) Laser Tube: Air-cooled metal/ceramic CO₂ tube Resolution: 75 – 1200 DPI engraving quality Memory: Up to 1GB file processing Motion System: Brushless DC servo motors BOFA AD Oracle Extraction System The included BOFA AD Oracle industrial fume extraction unit ensures a clean and safe working environment. Key Specifications Airflow: approx. 380–400 m³/hr HEPA H13 filtration with 99.997% efficiency at 0.3 microns Multi-stage filtration with activated carbon Noise level:

Condition: good (used), Year of construction: 1993, machine/vehicle number: RG III 51-2464, Offer 25489 Technical data: - Brush diameter: approx. 250 mm - Brush width: 60 mm - Disc speed: 1500 / 3000 rpm - Drive: 400 V / 2.4 / 3.7 kW - Brush depth adjustment Gsdpfszrv D Tjx Aafoka - 2 adjustable support blocks - Working height: 900 mm - Space required: approx. W 900 x H 1150 x D 500 mm - Weight: approx. 150 kg

Year of construction: 2016, condition: ready for operation (used), Max. glass dimensions: 2000x3000mm, number of spindles: 8, glass thickness: 3-28mm, length: 6500mm, width: 1600mm, height: 2600mm, weight: 3.2t. Godpfsin U I Uox Aafeka

Condition: good (used), Year of construction: 2015, machine/vehicle number: 0-200-24-0779, functionality: fully functional, input voltage: 400 V, input current: 55 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 20 mm, total length: 10,825 mm, Used single-sided HOMAG edge-banding machine for straight edges – KAL 370 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2015 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clockwise, counterclockwise), 2x4kW, rear motor w. jumping function GLUING SECTION V20, consisting of: - QA60 glue application unit, with PTFE-coating (Teflon), with manual quick-adjustment glue gates - pneumatic clamping of glue application in mount - Pre-melter for EVA glue - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - modes: edge rolls, (veneer) strips, solid wood edging - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK85 horizontal, 2 motors, with straight/chamfer cutting function - Rough trimming 2x1.15 kW, top/bottom - Corner rounding FK11, 2 motors (top/bottom) with various trimming heads, motorised adjustment - Universal trimming unit, (e.g. grooving), 3.5 kW, tiltable, w. electro-pneumatic jumping control - Multi-Profile (radius-) scraping MN11 with automatic positioning by NC-axis (CAN) - Flat scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers) - Buffing unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 Gkodpeztl Scjfx Aafja Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 4,600 kg, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, grinding belt width: 1,400 mm, workpiece width (max.): 1,350 mm, Heesemann HSM.3 multi-purpose surface grinding machine with crosshead unit, calibration unit, and DB-S unit. An all-rounder in a compact space. Calibrating, veneer and lacquer sanding, texturing, polishing, sanding fillers, edge rounding, ... - Automatic workpiece thickness measurement - Adjustable vacuum, integrated into the machine body - Height adjustment not via a chain drive, but via direct drive - Non-driven rollers at the infeed and outfeed (2 each) - Industrial PC 15.6", terminal on the front left - Program memory for up to 1000 programs - Feed rate 3 - 15 m/min - MMI package - Program for remote maintenance Gkodpsztafwsfx Aafoa - Program for dust extraction flap control - Cross-sanding unit, 15 kW, stepless sanding belt speed, for veneer sanding (longitudinal and transverse), lacquer sanding, saw-rough effect, with sanding belt cleaning, pressure bar with computer-controlled selective pressure control system CSD - Longitudinal sanding unit with pressure lamella belt and calibration function, 15 kW, stepless sanding belt speed, calibrating, fine sanding, and lacquer sanding, with sanding belt cleaning, pressure bar with computer-controlled selective pressure control system CSD - Rotating disc brush unit DB-S, for fine sanding, lacquer sanding, edge rounding, sanding fillers, polishing, texturing - Uninterruptible power supply - Energy Management System EMS - Ionization bar from above - Workpiece extraction system with individually controllable, rotating compressed air nozzles, inside the machine frame, conveyor belt cleaning program - LED lighting in the machine - and much more The machine is available in our showroom for demonstrations. Inspections and trial runs can be arranged by appointment.

Condition: ready for operation (used), Year of construction: 2015, A mobile 3D measuring system from FARO is offered for sale. Measuring arm: FARO Edge, year of manufacture: 2015, revision: 3.9. Laser scanner: FARO LLP HD, year of manufacture: 2015, revision: 3.2. Single Point Articulation Specification: 0.0290mm, Effective Diameter Specification: 0.0145mm, Volumetric Specification: 0.0410mm. Measured maximum Single Point deviation: 0.0254mm, measured maximum Effective Diameter deviation: 0.0020mm, measured maximum Volumetric deviation: 0.0217mm. Calibration date of measuring arm: 17 April 2024. Calibration date of laser scanner: 12 April 2024. Includes FARO LLP HD Laser Line Probe, transport case, stand and accessories. Documentation available. An on-site inspection is possible. Gsdpfx Aaoztduisfoka

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Gkjdpozrd Rzsfx Aafoa Working width (min/max) mm 250 / 2500 Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 35 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Snipping Unit HL86 (2 x Kw 0,22) Rough Trimming Unit BF10 (2 x Kw 0,55) Fine Trimming Unit PF20 (2 x Kw 0,4) FRRE SPACE for Corner Rounding unit ( Contour Trimming) FF 12 (2 x Kw 0,4) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: excellent (used), Double side - First (1st) machine in a line Machine Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 - 40 Working width (min/max) mm 195 / 1500 Gsdpfezrd Nqjx Aafoka Numerical Control /Software Power Control 22 / woodCommander Adjustable feeding speed (m/min) 15 - 32 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 Pressure zone A Edge coils supporting unit (No. 2 of reels) with servo-assisted edge feeding Rough Trimming unit BF10 (2 x Kw 0,55) Fine Trimming unit PF20 (2 x Kw 0,4) FRRE SPACE Milling grooving unit UF 11 (1 x Kw ?) Profile Scraping unit PN 10 Finish processing unit (Glue scraper + Buffing unit) FA 11 Spraying Unit (for polishing liquid)

Condition: as good as new (ex-display), 4-SIDE EDGE BANDING LINE + DRILLING Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Composed of the following machines: Gkedpszrd Dhefx Aafsa 202005a) 1st Double-side Sizing & Edge Banding machine "HOMAG" Mod. KFL 325/ M1 / C 202005b) Turning Station "HOMAG" Mod. TDL (from lengthwise to crosswise) 202005c) 2nd Double-side Sizing & Edge Banding "HOMAG" Mod. KFL 326/ M2 / C 202005d) Connecting Roller Conveyor 202005e) Automatic (through-feed) Multi Borer "WEEKE" Mod. BST 503

Condition: excellent (used), CATALOG NUMBER 7857 Technical data: - Maximum workpiece width: 1100 mm - Maximum workpiece height: 160 mm 2 sanding units: – From above: - Rubber pressure roller, smooth 1) Calibrating grooved rubber roller - Rubber pressure roller 2) Grooved rubber roller + pad + metal roller Gkodpfx Aaezty T Isfoa - Rubber pressure roller - Total unit power: 15 kW – From below: - 3 driven rubber feed rollers - Feed belt - 3 driven rubber feed rollers - Sanding thickness potentiometer - Pneumatic belt oscillation - Table elevation: electric + manual (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 6-8 bar - Extraction port diameter: 2 x 140 mm - Overall dimensions (L/W/H): 1650 x 1960 x 2100 mm - Weight: 1250 kg ADVANTAGES – Not repainted – Czech production – 2 sanding units – Original operator’s manual (DTR) – Used sander, in very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at exchange rate: 4.2 PLN/EUR (Price may change if the exchange rate fluctuates significantly)

Condition: excellent (used), Catalog number: 7549 TECHNICAL DATA max. width of workpiece 1100mm max. height of workpiece 170mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: metal roller, slip unit metal roller, slip unit with shoe metal output roller, slip – from below: conveyor belt pneumatic belt oscillation electric table lifting Gkodpfx Aozty Rtoafsa 2 types of feed speed motor 11kW with pneumatic brake working pressure 6-8bar diameter of extraction nozzle 2x150mm overall dimensions L/W/H 1960x1700x2000mm weight approx. 2000kg – made in Germany – 2 units – unpainted – used sander, very good condition Net price: 31900 PLN Net price: 7595 EUR, depending on the exchange rate of 4.2 EUR (Prices are subject to change due to higher fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 5799 TECHNICAL DATA Gkjdpfjzty Nvox Aafea - Max. width of workpiece: 230mm - Max. height of workpiece: 140mm - Min. length of workpiece: 300mm - 2 sanding units: - Upper and lower + platens * Upper: - 2 sliding, metal pressure rollers - Pressure - Sanding unit: 2 metal rollers + platen - Sliding pressure roller - Conveyor belt * Lower: - Conveyor belt - 2 sliding, smooth metal rollers - Pressure - Sanding unit: 2 metal rollers + platen - 3 sliding, smooth metal rollers - Electrically adjustable sanding height - Oscillation of sanding belts - Pneumatic belt cleaning - Smooth feed rate adjustment using a frequency inverter: 3-15 m/min - Feed motors: 2 x 0.37 kW - Main motors: - Upper: 5.5 kW - Lower: approx. 5.5 kW - Air consumption: 6-8 bar - Diameter of dust extraction nozzles: 4 x 100mm - Overall dimensions (L/W/H): 2340 x 1420 x 1920 mm - Weight: 1480 kg - For short components (belts overlap) - German manufacture - Very good condition - Unpainted - Used sander Net price: 18900 PLN Net price: 4500 EUR Net price calculated based on an exchange rate of 4.2 PLN/EUR (Price may change in the event of significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER: 6916 TECHNICAL DATA - Max. width of workpiece: 200 mm - Max. height of workpiece: 150 mm - 2 sanding units: upper – metal roller + backing pad + metal roller lower – metal roller + backing pad + metal roller from above: - metal pressure roller - sanding unit - slip metal pressure roller - cleaning brush - conveyor belt from below: - conveyor belt - 2 slip metal rollers, smooth - sanding unit - metal pressure roller - cleaning brush - output roller - electrically adjustable sanding height - pneumatic oscillation of sanding belts - stepless feed rate adjustment - feed motors: 0.55 kW - main motors: 2 x 4 kW - air consumption: 6-8 bar - diameter of dust extraction nozzles: 3 x 80 mm, 1 x 120 mm - overall dimensions (L/W/H): 1800 x 2070 x 2000 mm, weight: 1422 kg - Made in Germany - Unpainted - Very good condition, used sander Gsdpfxezty Nps Aafska Net price: 22900 PLN Net price: 5452 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (The price may change if the exchange rate fluctuates significantly)

Condition: used, Year of construction: 2025, New demonstration machine! List price €4,938 net. The robust Junior R1 offers all the features you would expect from a modern edge sanding machine. Its massive grey cast iron sanding unit with a powerful motor ensures maximum sanding performance. The work table, height-adjustable by spring pressure, allows for optimal belt use and safe operation. The upper section is made of heavy cast iron with an integrated three-phase motor (380 V, 2.2 kW, 2850 rpm). The machine is equipped with a built-in switch-plug combination, motor protection switch, and main switch compliant with VDE standards. Sanding belt back panel dimensions: 850 x 150 mm. Steel table height-adjustable by spring pressure. Belt size: 150 x 2280 mm. The sanding belt back panel is covered with a protective pad. The machine, when connected to a central extraction system with an air speed of at least 20 m/s, is dust-certified (GS). Includes angle and mitre fence. Technical data: • Motor power: 2.2 kW • Belt size: 150 × 2280 mm • Belt speed: 22 m/sec • Table size: 750 × 350 mm • Required space: 1000 × 800 mm • Weight: approx. 180 kg • Extraction connection Ø: 100 mm. Location: Rieth Gsdpfx Asx Hwr Rsafjka

Condition: new, Year of construction: 2026, CASADEI Libra 35 - Wide belt sanding machines in a two-belt configuration immediately available - from stock in 54634 Bitburg Technical data Sanding width 1100 mm Min. / max. working height 4 / 170 mm Sanding belt width 1115 mm Gksdocr S Ecspfx Aafja Sanding belt length 1900 mm Feed speeds 4.5 / 9 m/min Feed motor 0.33/0.55 kW Motor power, table adjustment 0.25 kW Power of drive motor 11 kW Electrical voltage 400 V Phase(s) 3 phases Mains frequency 50 Hz Length 1650 mm Width/Depth 1820 mm Height 1960 mm Image shows optional equipment Wide belt sanding machine in a two-belt configuration up to 1100 mm with numerous optional features for cost-conscious workshops Robust, tubular reinforced monoblock steel machine body with work units mounted high up for maximum rigidity User-friendly due to clear control panel on the front Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air consumption Automatic star-delta start for the main motor Natural rubber feed belt with a negative profile Support table with two rollers at the infeed and outfeed of the feed belt Belt feed via geared motor with two speeds Flexible steel pressure bar in front of the first unit Rubber pressure rollers, before and behind each work unit Pneumatic belt tension per unit with decimal correction option for grain size/belt thickness Quality - Made in Europe RTC version 1st unit with grooved steel roller Ø 120 mm and fine adjustment for calibration 2nd unit Combination unit with finely adjustable working height for calibration and fine sanding with rubber-coated roller Ø 120 mm (45 Sh) and hard sanding shoe with graphite coating on a replaceable insert Scope of delivery: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with an electronic system Rubber-coated, grooved pressure roller at the infeed, 1° position with anti-rollback protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Accessories: - Semi-hard flat sanding shoe - Automatic belt centering Location: From stock in Bitburg - at a special price

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec Gkjded R Ev Depfx Aafsa • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee.

Condition: new, Year of construction: 2026, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding workshops. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, miter saw, milling unit, radius pull blade, corner cutter, surface pull blade, and finishing station. For even more flexibility on the way to the perfect finish, the F 5 can optionally be equipped with a practical multi-radius pull blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min Edgebanding machine F5 Next With PLC control (including touchscreen) and with hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank preparation including glue dispensing device, HF miter saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combination design), corner rounding cutter, radius pull blade, surface pull blade (including pneumatic feed), finishing station, robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. Hebrock F5 F5/08/4 Quick-change preparation for corner cutter F5/08/5 additional interchangeable motor for corner cutter with tool set F5/09/4 Multi-radius pull blade (R1/R2) F5/10 Chassis F5/14 additional interchangeable tank F5/24/1 Spray device for release agent F5/24/2 Spray device for cleaning agent F5/25 Spray device for edge F5/27 Nesting for cutter and radius pull blade F6/28 Spray texture finish F5/30 Pneumatic 3-point adjustment (radius, bevel, flush milling) F5/31 Jointing up to 50 mm F5/32 LED lighting Location: In stock, 54634 Bitburg Gjdpfxolht Hwj Aafjka - available immediately -

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: Used - ready for operation Description Wide Belt Sander Condition: Function tested – Working width: 1300 mm – Cross sanding unit with belt blowing device – Longitudinal sanding unit with infinitely variable speed and belt blowing device – Calibration roller, can be engaged via the control system – Vacuum conveyor belt – feed speed infinitely variable – Satin finishing roller – Brush roller – Machine settings and pressure control system CNC controlled Gjdpfx Aex N A Aajafjka - EA dedusting machine, high-pressure blow-off unit with rotating nozzles and ionization for statically charged dust Location: ex stock 54634 Bitburg - Immediately available - Free loaded

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Gjdpelht Hzofx Aafjka F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Gjdpfsi Am U Djx Aafoka F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Condition: new, Year of construction: 2026, KRBS 101: Combined tube, profile, and belt grinding machine Convenient operation thanks to easily adjustable clamping device The rotatable clamping jaws of the clamping device enable secure clamping of square tubes, round tubes, and flat steel Adjustable grinding angles from 30 - 90° and from 0° - 60° The optimized quick-change holder allows the clamping roller to be easily and quickly replaced without tools Particularly durable thanks to larger and improved roller bearings Practical clamping roller holders integrated in the base Extensive range of clamping rollers for grinding various tube diameters available as accessories Quick changeover between tube grinding and belt grinding possible Powerful motor Almost all settings can be carried out without tools (operating tool included) Large, foldable protective screen with optimal field of vision Two belt speeds allow optimal adaptation to the respective material (15 m/s best for stainless steel and aluminum, 30 m/s perfectly suited for steel) With two easily removable chip collection containers Dust extraction port (Ø 100 mm) for dust extraction systems available Dust extraction systems available as accessories Further developed, vibration-reducing base Scope of delivery: 1 x Standard grinding belt, grit size K 36 2 x Chip collection containers 1 x Wrench 1 x Grinding roller 42 mm Model: KRBS 101 Item No.: 3921001 Technical data Mains connection: 400 V Mains frequency: 50 Hz Motor power: 2.5 / 3.3 kW Grinding diameter: 20 - 76 mm Grinding angle: 30 - 90 ° (0° - 60°) Grinding belt (length x width): 2000 x 100 mm Belt speed: 15/30 m/s Dust extraction port diameter: 2 x 100 mm Gsdpfxocnz Ays Aafeka Dimensions (length x width x height): 1250 x 750 x 1140 mm Weight: 159 kg Location: Ex works - available for short-term delivery

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L – Like New – Only 10 Minutes of Use – Wide-belt sanding machine including version for intermediate sanding of coatings Special price for showroom machine – in-house exhibition machine – - Robust, space-saving W-type wide-belt sanding machine for the highest demands. - Constant working height thanks to adjustable headstock - Working width: 1350 mm - Top-grinding, with 2 sanding units - Grooved rubber contact roller in proven hardness - Contact roller level adjustable in stages according to a grit scale - Electric raising/lowering of the contact roller according to the selected unit - Electronically controlled segment sanding pad - Entire sanding pad unit adjustable by 10 degrees - Parallel spring-mounted, ground steel pressure roller at the infeed - Rubber-coated pressure roller between the sanding units and at the outfeed - 2 motors, 18.5 KW and 11 KW, 400 Volt, 50 Hz - Motor-driven fine adjustment of the height with digital display - Belt tension, control and oscillation pneumatically controlled Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 KW with transport belt and drive roller - Vacuum device for the entire work table with additional holes of over 200 mm for smaller workpieces - Automatic thickness adjustment over the entire working width - Workpiece over-thickness protection with feed instant stop and lifting mechanism - Infinitely adjustable chip removal rate - Electronic feed control on the control panel, infinitely adjustable from 3 - 15 m/min - PLC control with Teach-In memory - Pneumatic belt control - Workpiece support with roller at the infeed and outfeed - Enormatic: Fully automated quick setting and feed release - Eco energy-saving mode Gsdjk Dpp Sepfx Aafska - Fault diagnosis - Passage height 210 mm up to 18.5 KW - Sanding belt dimensions 1350 x 2000 mm Perfect – Features: High-quality swiveling plexiglass control panel - 10-inch touch screen - Industry control - Automatic pressure regulation and storage of the sanding pad elements - Electronic compensation of the sanding belt grit size - Cycle counter and operating hour counter Coating equipment - Infinitely adjustable sanding belt speed on the 2nd unit - Spray nozzles for cleaning the sanding belt of the 2nd unit, controlled by the process - Electronic sanding pad with a segment width of 22 mm - Additional sanding pad insert Additional options included with the machine: Fold-down outfeed table extension (without top) C10) LED package ASB5+AS3) ECS workpiece blowing system with fan Location: 54634 Bitburg - Available immediately -