Used Maxdrop 2000 Al 200 for sale (27,811)

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 6/0049/35449, MACHINE SPECIFICATION Centre height 190mm Distance between centres 1250mm Swing over bed 387mm Swing over cross slide 241mm Spindle bore (max. Bar dia) 54mm Spindle nose mounting D1-6 Camlock Taper in spindle nose bush & tailstock barrel No. 4 Morse Width of bedways 279mm Total travel of cross slide 235mm Total travel of top slide 120mm Total travel of tailstock barrel 155mm Spindle speeds (16) 25-2000rpm Drive vee belt and clutches Spindle motor 5.6kW Whitworth threads (45) 2 -72 tpi Diametral threads (21) 8 – 44 DP Metric pitches (39) 0.2 – 14mm Module pitches (18) 0.3 – 3.5 mod Sliding feeds. Per rev. of spindle 0.0015 – 0.040” Surfacing feeds. Per rev. of spindle 0.00075 – 0.020” Machine in Metric execution Machine Equipped with Ljdpsy Nkwfsfx Amnjrl Newall NMS300 2 axis DRO system 3 & 4 Jaw chucks Quick change toolpost and 3 off toolholders Lighting Coolant system Chuck guard Rear splashguard

Year of construction: 2015, condition: used, Dimensions (LxW): 160 x 240 cm CO2 emission: 0 g/km Lrsdpsy Tyb Ujfx Amnol Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: excellent (used), Year of construction: 2010, total height: 3,300 mm, total length: 5,600 mm, total width: 4,300 mm, table load: 2,000 kg, overall weight: 10,500 kg, Spindle SK 40 Speeds 8000 Rpm with 165 Nm Workload 2000 Kg ATC 56 Positions Lrsdoyh U E Hopfx Amnel Hours spindle 10.304 Closed housing with automatic top door IKZ Coolant system LTA Air Cleaning Length:5600mm Width:4300mm Height:3300mm Weight:10500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1998, CNC Vertical lathe DS Dorries Scharmann - VCE 2000 FMC MACH-ID 9088 Make: DS Dorries Scharmann Type: VCE 2000 FMC Ljdpfxewb Ayis Amnerl Control: SIEMENS 840C Year: 1998

Condition: excellent (used), Year of construction: 2014, turning length: 700 mm, travel distance X-axis: 205 mm, travel distance Z-axis: 700 mm, spindle motor power: 22,000 W, total height: 2,800 mm, total length: 6,000 mm, total width: 3,900 mm, overall weight: 9,800 kg, Complete machining with twin spindel, upper and lower turrets Kitagawa 3 chuck left and right Tool holders with driven tools axial and radial Large jaws cabinet with inserts OGL Gantry loader with ca 10 Kg load capacity Chip conveyor Paper Filtration Pressure Tank Max. turning Ø: 400mm X-Axis: 205mm Z-Axis: 700mm Spindle bore: 62mm Speedrange: 6000Rpm Lrodpfeyn Em Rsx Amnel Spindle power: 22kW Subspindle speeds: 6000Rpm Subspindle bore: 62mm Subspindle power: 15kW ATC / revolver: 16 Speed live tools: 6000Rpm Positions lower revolver:16 Speed live tools: 6000Rpm Power live tools: 7kW Chip conveyor: yes Tool eye: yes Length: 6000mm Width: 3900mm Height: 2800mm Weight: 9800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1971, functionality: fully functional, turning diameter over bed: 900mm turning diameter over slide rest: 800 mm Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm turning rate: 14 - 710 min-1 dimensions (LxWxH), approx.: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements Ljdpoy T I Hfofx Amnsrl The main spindle box was completely overhauled approx. 10 years ago. The vibration-damping elements are included in the scope of delivery. The machine is from the original owner.

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 11/2017, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 2,690 mm, total length: 13,870 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,890 mm, color: white, Year of construction: 2017, Equipment: tail-lift, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: BPW Drum Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 50%; Tyre profile right: 50% Rear axle 2: Max. axle load: 9000 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50% Weights Empty weight: 8.900 kg Carrying capacity: 23.100 kg GVW: 32.000 kg Lodjy Talmopfx Amnorl Functional Tail lift: Dhollandia DHSMR.20, slider lift, 2000 kg Make of bodywork: Groenewegen Plywood Box Maintenance, history and condition Number of owners: 2 APK (MOT): tested until 08/2026 Technical condition: good Visual appearance: good Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, mileage: 535,000 km, power: 240 kW (326.31 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,500 mm, total width: 2,540 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,550 mm, loading space width: 2,460 mm, loading space height: 2,550 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, traction control, General information Year of manufacture: 2016 Registration number: 41-BHR-6 Technical information Number of cylinders: 6 Engine capacity: 7.698 cc Front axle: Max. axle load: 7500 kg; Tyre profile left: 70%; Tyre profile right: 70% Rear axle: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90% Weights Empty weight: 9.235 kg Carrying capacity: 9.765 kg GVW: 19.000 kg Functional Tail lift: Dhollandia, tail lift, 2000 kg Financial information Price: On request = Additional options and accessories = - Aluminium fuel tank - Camera system - Central lubrication - Comfort seat with heating - Hardwood floor - Heavy duty engine brake - Radio/CD/USB - Rear air suspension Lsdpfxjy Ti Aue Amnjrl - Reversing camera - Roof spoiler - Suspension seat - Toolbox 2x - Visor

Condition: ready for operation (used), Year of construction: 2012, operating hours: 49,627 h, clamping force: 3,000 kN, screw diameter: 70 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2012. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details. • PP injection capacity: 640 g • Mould dimensions (min.): 320 mm • Tie bar spacing: 630 × 630 mm Lredpey S Tq Hefx Amnol • Maximum mould opening: 1000 mm • Working hours: 49,627 h

Condition: ready for operation (used), Year of construction: 2011, operating hours: 49,533 h, clamping force: 3,000 kN, screw diameter: 70 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 300-2000 CX features a clamping force of 300 t and a screw diameter of Ø 70 mm. It has a maximum mould opening of 1000 mm and tie bar spacing of 630 × 630 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 300-2000 CX machine we have for sale. Contact us for further details. Ledpfxjy S Tqao Amnsrl • PP injection capacity: 640 g • Minimum mould dimensions: 320 mm • Tie bar spacing: 630 x 630 mm • Maximum mould opening: 1000 mm • Working hours: 49,533 h

Condition: excellent (used), Year of construction: 1982, Hydraulic guillotine shear, manufacturer KRAMER, Model: TM 3 Hydr. 2000, Year of manufacture: 1982, in very good original condition. Cutting capacity: 2000 mm x 12 mm in steel. Equipped with hold-down device, angle stop, and manual back gauge up to 750 mm, machine feet, and machine documentation available. Very good condition. Machine dimensions: width 3100 mm, depth 2450 mm, height 2250 mm, weight approx. 5500 kg. Lodpfey Siftox Amnorl

Condition: used, Year of construction: 2010, This Filling machine has been running supporting a large supermarket Chain for the Greek Yoghurt Type cups from 500 gr to 1000 gr yoghurt. The machine has been maintained very well and will be available for dismantling October 2025 . It can be seen running in production. This consists of cup de nester, cup peroxide, filling, UV on film, Film sealing on roll off , Over lid Cap applicator . Capacity: 2000 cps/hr Filling Type: Piston Filler Filling Volumes : 500-1000 gr Controls: Siemens HMI Cup disinfection: Peroxide Film Disinfection: UV Cup Diameter: 120 mm Film application: Heat sealing and cutting off roll Over cap: Plastic lid after sealing Ledpfxoyr Nlfo Amnsrl

Condition: excellent (used), Year of construction: 2001, pressure: 13 bar, 1 used steam boiler ----- Lrsdpfx Amewub Hbjnsl Manufacturer: LOOS, Gunzenhausen Type: U-HD Heating surface approx.: 31 m² Maximum output: 2,000 kg/h Maximum permissible operating pressure: 13.0 bar Increased test pressure: 23.4 bar Water content at NW approx.: 1,740 l Total water content approx.: 2,480 l Year of manufacture: 2001 Equipped with Weishaupt gas burner, gas control line, control cabinet, feed water pump, water level sight glass, steam and safety valve, and the existing coarse and fine fittings.

Condition: ready for operation (used), Siemens 1FT5064-0AF71-1-Z motor SN: EE066569802002 with ROD 320.002 2000/U - Z = G42 (encoder system 2000 pulses/revolution ROD 320), used, good condition, 100% functional, scope of delivery as shown in the photos. Lsdpfx Aey R It Hsmnjrl

Condition: new, Year of construction: 2026, 0460 mm 270 mm 1500 mm 230 mm 76 mm Lrjdpjwrma Uefx Amnjl 11 kW

Condition: used, Crane hook, lifting clevis, bottom clevis for chain hoist Hook clevis, load hook DEMAG, 2-strand Suitable for PK10 Load capacity: 2000 kg Demag No.: 56236044, replaced by Demag No.: 64755304 For two load strands Chain nominal dimensions: 10.0 x 28.0 mm Chain pitch for 1 chain link: 28 mm Chain pitch for 11 chain links: 208 mm Wire thickness = nominal thickness: 10 mm Outer dimension, transverse: approx. 34 mm Inner dimension, longitudinal: approx. 28 mm Outer dimension, longitudinal: approx. 48 mm Self-weight: 6.6 kg Very good condition, from stock Lrsdpfxsy Tptmj Amnsl

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs Lodpoikn Rrefx Amnerl -Length: 2500mm -Width: 2000mm -Plate thickness: 40 mm -Plate: with support ribs - Flatness: see photos (guideline not included) -Transport dimension: 2500/2000/H875 mm -Weight: 3110 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, 2-axis: Programmable X, R axis Bending length: 2100 mm Max. force: 40 t Max. opening between beams: 615 mm Max. stroke: 200 mm Approach speed: 140 mm/s Working speed: 0 – 10 mm/s Stroke speed: 140 mm/s Dwell: 6 mm Lsdpfxoya Dggs Amnerl Dimensions (LxWxH): 2900 x 1900 x 3050 mm Weight: approx. 5200 kg The machine can be inspected under power at any time.

Condition: ready for operation (used), CANTILEVER RACK DOUBLE-SIDED | HEIGHT 200 CM | 200 KG PER ARM This double-sided cantilever rack is ideal for storing lightweight long goods such as pipes, profiles, battens, laths, rails, and other bulky materials in warehouses, workshops, or craft businesses. With an overall height of approx. 200 cm and cantilever arms of approx. 50 cm, the rack provides clearly arranged and easily accessible storage spaces on both sides. Thanks to 6 storage levels including the base, it offers ample storage capacity while saving valuable floor space. Each cantilever arm is loadable up to 200 kg. The robust construction ensures reliable performance in daily operations. FREE DELIVERY WITHIN GERMANY IS INCLUDED. PRODUCT DETAILS: - Rack type: double-sided cantilever rack - Total length of rack row: approx. 3.91 m - Total height: approx. 2,000 mm - Usable depth per arm: approx. 500 mm - Usable depth of base level: 525 mm - Total depth: 1,150 mm - Center distance (upright spacing): approx. 1,250 mm - Maximum load per arm: 200 kg (with evenly distributed load) - Maximum load per upright: 1,000 kg (with evenly distributed load) - Storage levels per side: base + 5 - Design: double-sided, arms & anti-roll-off devices welded in place - Colour: RAL 7016 (anthracite grey) - Connectors & bracings: galvanized SCOPE OF DELIVERY: - 04 x uprights incl. base section made of IPE100, height approx. 2,000 mm - 40 x cantilever arms, approx. 50 cm long, RR 50x30x2 mm Ledpfx Amsy Tvvbjnerl - Incl. all braces and required bolts - Incl. heavy-duty anchors Price: 1229.00 € net incl. delivery 1462.51 € gross incl. delivery You will receive an invoice with VAT shown separately. Delivery included: Nationwide free delivery within Germany, excluding islands. Fast processing and prompt shipping upon receipt of order. INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. You can find our phone number on our company page. We are available by phone from Monday to Friday, 08:00 a.m. – 4:00 p.m. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Year of construction: 2025, machine/vehicle number: 20250205009, Field of application: Construction Empty weight: 560 kg Lrodpfewqkmcsx Amnel Generator capacity: 200 kVA Dimensions of cargo space: 103 x 54 x 77 cm CE mark: yes Frequency: 50 Voltage: 400 Production country: CN Please contact Team DPX for more information

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 4016TAG1A, General information Field of application: Construction Weights Empty weight: 5.847 kg Functional Generator capacity: 2.000 kVA Dimensions of cargo space: 575 x 230 x 302 cm CE mark: yes Other information Fuel consumption: 277.6 Liter at 75% Load Generator: Leroy Somer LL9224F Frequency: 50 Voltage: 400 Drill equipment: Control Panel Lrjdpfxeyqmhns Amnol Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Lodpfxjy S Tm Us Amnsrl Chip conveyor Coolantsystem C-axis in main and sub spindle Y-axis 2 x part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface Lehmann Robot with parts belt for feeding and disposal CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. For shaft parts loading and unloading there is a Lehmann Robot conveyor belts for loading and unloading. The machine can also be sold without robot. *

Condition: used, Swing cut guillotine shears KÖLLSCHEN type BSK 2000/2 No. 69 1307 Year of manufacture 1969 Cutting length 2000 mm Lrodpfx Asifu Anemnsl Cutting thickness 2 mm Stand projection 90 mm Working height 920 mm Mains connection 380 Volt, 50 Hz Motor power 4 kW - Drive via geared motor with brake and crankshaft - Mechanical sheet holder - Manual back gauge 500 mm - fence adjustment via 2 handwheels, at the rear on the back gauge guide with scale - front side stop left 720 mm - electric foot switch - manual central lubrication - Control cabinet on the machine - Machine stands on 4 swinging elements, approx. 100 mm height Space requirement L x W x H 2800 x 1700 x 1450 mm weight 2300 kg good condition

Condition: new, ELWA ETR 96 Type R 2000 - EL21-1 SN: 2474-021, unused in original packaging, 100% functional, scope of delivery as per photos. Lodpfx Aoy Rckyemnorl

Condition: excellent (used), Sandingmaster 2000 - Feed rate: 4–16 m/min Lredpfx Amjy R U D Eonol - 16 kW - Sanding width: 900 mm - Year of manufacture: 1995 - Dimensions: 1800 x 1800 x 2300 mm Due to the age of the used machine, warranty is excluded for commercial customers upon sale.