Used Matsuura H Plus 405 Pc6 for sale (57,726)

Condition: good (used), Jack, support jack, lifting stand, bottle jack, mechanical lifting stand, axle jack, aluminum jack, hydraulic lifting stand -Manufacturer: Tangye, Aluminum jack, hydraulic lifting jack 6.5 ton -Type: Hydramite plus -Stroke travel: 76 mm -Shaft: Ø 30 mm Bodpfx Amjx Eifdjmsdc -Quantity: 1x lifting jack available -Dimensions: 240/100/H135 mm -Weight: 3.9 kg/pc.

Condition: good (used), Year of construction: 2007, operating hours: 4,262 h, functionality: fully functional, machine/vehicle number: R7AV13, turning diameter: 65 mm, Can be powered up, the condition of the bar feeder is unknown, removed from production due to arrival of a new machine. On both turret heads, the use of a driven tool holder is possible in all positions. Bjdpsyxxhqefx Ammjdc

Condition: new, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including immediately and soon-to-be available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. - Gooseneck in SNT design to optimize load platform length, approx. 3,700 mm long, with a rear taper approx. 1,000 mm x 6° - For tractors: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic power pack for hydraulic operations (excluding hydraulic winches). Without supply line installation on the tractor unit - Outer beams of the gooseneck with mounting holes for boltable lashing rings. First hole approx. 200 mm from the front, subsequent holes approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper part of the gooseneck’s outer beams for a boltable lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the gooseneck’s outer beams (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - Grating covering on the gooseneck and rear taper with 5 mm steel reinforcement - 2" kingpin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit, with plug (NATO-NATO) - 1 pair of detachable aluminum side boards on the gooseneck, approx. 400 mm high, anodized finish CARGO AREA: - Cargo area, approx. 9,600 mm long, with rear taper approx. 900 mm x 6° - Cargo area behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, load capacity up to approx. 9,000 kg - TPMS (Tire Pressure Monitoring System) according to ECE R 141 - BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle with trailing steering. 3rd axle with electromagnetic reverse lock via reverse gear and manual activation - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand of our choice, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel plating for additional reinforcement, designed for point loads: on the lift bed and cargo area - Painted sand coating on the gooseneck cover plates as well as transition areas between neck and lift bed, lift bed and cargo area, and cargo area and ramps - 1 spare wheel mounting bracket under the cargo area to the right in front of the axles - Cut-outs in the outer frame of the cargo area and lift bed for attaching tie-down straps (LC 2,000 daN) - 11 pairs of recessed, fold-out lashing rings in the outer frame of the cargo area (LC 10,000 daN): 3 pairs in the lift bed outer frame, 8 pairs in the cargo area outer frame - 11 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 3 pairs in the lift bed, 8 pairs in the rear cargo area Bjdpfxsyhkquj Ammodc - Control valves for the hydraulic ramps located on the right side of the vehicle - 1 pair of foldable mechanical rear supports, single-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a

Condition: used, Year of construction: 2011, machine/vehicle number: 2502, Stapelauslage / Stacking Delivery Palamides Alpha 700 PlusBaujahr / Year 2011 - Serial-No. 2502 Minimalformat / Size minimum 120mm x 90mm Maxmimalformat / Size max. 330mm x 510mm Stapelhöhe / Stack height 10 - 160mm Bedpjl I Aa Esfx Ammodc Geschwindigkeit / Speed 15 - 200m7min Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2022, condition: like new (used), Goliath toothed roller mills can be integrated into granulate supply processes for injection molding and extrusion systems. In this way, complete material supply systems or inline recycling applications can be installed, consisting of: Advantages of the Goliath granulators: Bdedpfx Amexqd Siomoc - IMD all-metal detection system - Compact design - Robust and wear-resistant - Highly energy-efficient granulator - Easy operation and cleaning - Trapezoidal tooth profile for optimal regrind quality - Extended service life due to reversible combs, counter combs, and pre-shredders The Goliath Plus 2 IMD granulator is for sale; the unit has NEVER been in operation! The original price is approximately €9,800. Goliath Plus 2 Cutting chamber size: 228 mm x 265 mm Motor: 2.2 kW

Condition: new, Year of construction: 2015, Factory-new machine, has only been used for test runs, condition is as new. TECHNICAL DESCRIPTION The DIGIT MAGGI throughfeed drilling machine is an automatic multi-spindle throughfeed drilling machine equipped with 2 horizontal heads and 6 vertical heads, designed for high-volume production. TECHNICAL SPECIFICATIONS Number of horizontal heads: 2 Number of vertical heads: 6 Minimum distance between vertical heads: 165 mm Bdedpfxsxd Ruwj Ammjc Minimum distance between horizontal heads: 320 mm Distance between spindles: 32 mm Number of spindles in horizontal head (left red - right black): 23 (11 - 12) Number of spindles in vertical head (left red - right black): 11 (5 - 6) Maximum vertical drilling depth: 55 mm Maximum horizontal drilling depth: 65 mm Maximum workpiece dimensions: 2800 x 870 x 50 mm Minimum workpiece dimensions: 250 x 150 x 12 mm Number of motors: 12 Horizontal head motor power: 2 HP (1.5 kW) Vertical head motor power: 1.5 HP (1.1 kW) Number of clamps: 10 Loader feed speed: 57 m/min Working air pressure: 6–8 bar Standard air consumption: 60 l/cycle Maximum clamp height above worktable: 75 mm Overall dimensions: 4150 x 1600 x 1800 mm Worktable height: 950 mm Packaging dimensions: 4300 x 1950 x height 1900 mm

Condition: used, Year of construction: 2010, type of input current: three-phase, input voltage: 400 V, overall weight: 251 kg, cutting current: 130 A, air pressure: 4.5 bar, open-circuit voltage: 400 V, protection type (IP code): IP22, input current: 46 A, We are offering this used Kjellberg HiFocus 130, year of manufacture 2010. Model: HiFocus 130 Bdjdpfx Ajygimxsmmoc Minimum output current: 20 A Minimum output voltage: 88 V Maximum output current: 130 A Maximum output voltage: 132 V Duty cycle: 100% No-load voltage: 400 V Number of phases: 3 Mains frequency: 50 Hz Mains voltage: 400 V Mains current I₁max: 46 A Mains current I₁eff: 46 A Protection class: IP22 Insulation class: F Cooling type: AF Weight: 251 kg Minimum power consumption: 0.7 kW Maximum operating pressure: 0.45 MPa Test voltage: 17 kV If you have any questions or require further information, feel free to send us a message.

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, axle configuration: 4x4, load capacity: 400 kg, mast type: other, lifting height: 18,450 mm, platform length: 2,400 mm, platform width: 900 mm, overall weight: 8,930 kg, fuel type: hybrid, color: red, Equipment: all wheel drive, Articulating Boom Lift AIRO A18 JRTH 400 Plus with Hybrid Battery Operation Technically refurbished and in fully functional condition. Visual condition as is. - All-wheel drive / All-wheel steering - Oscillating axle - Differential lock Year of manufacture: 2022 Max. working height: 18.45 m Max. driving height: 18.45 m Max. lateral outreach: 9.80 m Max. platform load: 400 kg Platform rotation: +/- 90° Max. gradeability: 22° Transport dimensions L/W/H: 7.08 (5.00) / 2.20 / 2.41 (2.80) m Drive: Hybrid battery drive, 4x4 all-wheel drive Color: red Bodpfjyf Hfvjx Ammodc Special features: Large work basket 2.40 x 0.90 m, supercharger, high-visibility off-road tires UVV safety inspection new upon purchase! Available from stock Langenhagen All information regarding the offered machine is without guarantee. Subject to errors, omissions, and prior sale.

Condition: good (used), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: documentation/manual, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2006 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Number of running hours : 9911 [h] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] Bsdjx Iiw Iepfx Ammedc EQUIPMENT INCLUDED: x1 RENISHAW TS27R tool probe x1 spindle cooling unit x1 parts catcher x1 coolant tank x1 unit for 6th face machining (gripping system not included) x29 tool holders type HSK40 BIG KAISER x10 collets type F37 SCHAUBLIN x1 washing gun x1 3-color status light x1 maintenance manual x1 electrical diagrams manual x1 operator's manual x1 programming manual Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: used, Year of construction: 2002, operating hours: 11,000 h, Equipment: all wheel drive, * O & K MH Plus wheeled excavator with approx. 11,000 operating hours - first commissioned in 2002 * With articulated system - quick coupler - hammer line and 5 buckets in total * Transport length : 7,900 mm - Total width : 2,500 mm - Total height : 3,100 mm Bedpfx Amjxgldljmsdc * Total weight : 14.300 kg - Tires 10 R 20 - Vehicle available immediately - * Regularly serviced - German vehicle - From 1st hand - * Engine manufacturer : Deutz Type : F4L913 with 78 KW / 106 PS * PICK-UP PRICE - TAKE IT AS IS - WITHOUT TÜV - WITHOUT LICENSE PLATE - * For viewing please make an appointment * Contact person : Mr. Andreas Vogel * The information provided on the Internet is a non-binding description. * They do not represent warranted characteristics. * The seller is not liable for typing or data transmission errors. * Subject to alterations, errors and prior sale.

Year of construction: 1997, condition: ready for operation (used), Center height: 195mm, center width: 1250mm, turning diameter over bed/faceplate/in bed gap area: 400mm/245mm/585mm, spindle bore: 54mm, speed: 2500rpm, power: 7.5kW, rapid traverse face pull/longitudinal pull: 1.5m/3m/min, quill: MK5. Machine dimensions X/Y/Z: approx. 2600mm/1500mm/1600mm, weight: approx. 1800kg, control: GE Fanuc. Documentation available. On-site inspection is possible. Bsdpfx Asua E Txemmjdc

Condition: not inspected (used), Year of construction: 2022, machine/vehicle number: 3163870, functionality: unexamined, volume flow: 1,500 m³/h, noise level: 75 dB, overall weight: 700 kg, pressing: 5,000 Pa, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Airflow: 1,500 m³/h Operating voltage: 230/400 V Frequency: 50 Hz Operating pressure: 50 mbar Max. operating temperature: 40 °C Separator type: wet scrubber Available negative pressure at raw gas connection: 700 Pa Maximum sound pressure level: 75 dB Nominal diameter of clean gas connection: 450 mm Water capacity of waste container: 150 l Fan data, total pressure: 5,000 Pa MACHINE DETAILS Connected load: 4 kW Total weight: 700 kg Bedpfx Aoxnatksmmjdc Overall width: 800 mm Overall length: 1,300 mm Overall height: 2,400 mm

Condition: new, Year of construction: 2025, ∗JCB 403 Plus New Machine∗ - JCB Diesel by Kohler [36kW/49HP] - No AdBlue required - Lift height: 2.77m - Rated load capacity: 1,800kg - Hydrostatic drive - 20km/h - Comfort cab (ROPS/FOPS) - Hydraulic quick coupler, Weidemann type - Auxiliary hydraulics - Roof protection grille - Adjustable steering wheel - Full-opening doors - Heating - Additional rear weight 123kg - Servo single-lever control Bdodpfsyfr I Nsx Ammec - LED work lights front/rear - Yellow beacon - Exterior mirrors right/left - Grease gun - Right armrest - Forks and bucket available Immediately ready for use, many other attachments in stock. A viewing appointment is expressly requested. Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Mihm (Tel.) will be happy to assist you. More information is available on our homepage. Errors and prior sale excepted! Quick coupler system, road approval = More information = Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2023, Compression valve - SchubMax Plus - Bottom hitch with / Ball head Kompfortsteuerung MMS elect. MMS electric message / 'tailgate closed' hydr. forced steering Load Sensing / swivel hood for chopped material 710/50 R26.5 / Alliance 885 / / Bdjdpet U Ekhjfx Ammoc

Condition: used, Year of construction: 2023, Load Sensing pressure valve Lamp holder on tailgate Rear underride guard / with triangular roof - SchubMax Plus - bottom hitch with ball head electric / "tailgate closed" message Tridem hydraulic chassis Swivel top for / chopped material hydraulic Bdedpfx Ajrxurfsmmsc

Condition: used, mileage: 151,840 km, power: 130 kW (176.75 HP), first registration: 12/2006, fuel type: diesel, empty load weight: 6,390 kg, maximum load weight: 5,600 kg, overall weight: 11,990 kg, tire size: 365/80R20, axle configuration: 4x4, wheelbase: 3,080 mm, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 2, loading space length: 2,400 mm, loading space width: 2,050 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, cruise control, differential lock, low noise, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, private premises. 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, center console, Telligent gearshift, ABS (anti-lock braking system), raised exhaust, differential lock, high beam headlights, work lights, rotating beacon, leaf spring suspension, trailer coupling air-light-hydraulic, low-noise G1, winter service equipment, pendulum tailgates, green environmental badge. Wheelbase: 3,080 mm. Body: 3-way tipper body with aluminum side walls. Differential locks on front and rear axles, VarioPilot (left-right changeover), engine PTO, hydrostatic drive with variable displacement motor (SN), front mounting plate size 3, rear mounting brackets, ABS, fine dust and pollen filter, dual-circuit hydraulic system with EHS 3-cell, rear connector 4-fold cell 2+3, separate return line rear, snow plow relief, 3rd circuit high-performance hydraulics, additional pressure line middle, hydraulic quick-connect front 4-fold cell 1 and 2, additional pressure line front, separate return line front, additional pressure line front 3rd circuit, quick radiator cleaning system Clean-Fix. Bdedpfx Amsvhm Edjmoc 10,160 operating hours Loading height approx. 1,490 mm! Gross train weight: 28,010 kg Matching salt spreader and snow plow available at extra cost! The price has been increased from EUR 33,900 to EUR 36,900 as EUR 3,000 has been invested in reconditioning and service work! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to prior sale, changes, and errors!

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 685 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D, rotational speed (max.): 20,000 rpm, The machine spindle was replaced in 2022! The original purchase price of the machine was EUR 600,000! TECHNICAL DETAILS Travel range X-axis: 2000 mm Travel range Y-axis: 685 mm Travel range Z-axis: 630 mm Rapid traverse on all axes: 40 m/min Axis acceleration: 0.25 g Max. spindle speed: 20,000 rpm Max. rotary table speed: 1,000 rpm Tool changer positions: 92 Tool holder: HSK 63 NC swiveling axis: ± 100° MACHINE DETAILS Control: Siemens 840D EQUIPMENT Remote diagnostics and teleservice Maintenance instructions displayed on screen 5-axis milling package Fixed table with integrated rotary table Kessler milling rotary table DTE 520 NC swiveling head with spindle stock Direct measuring systems Chip conveyor (hinged belt) Coolant system HL 450 / 900 (IKZ) Full-flow cleaning via paper band hydrostatic filter HL450 Coolant filtration 50 µm nominal Chip blow gun Coolant recooling unit Additional tray rinsing Machine preparation for air through spindle Work area extraction system Safety package MILL 2000 with reinforced cabin and safety glass Zero point clamping system NSL tur 570-5-Z for DTE 520 Tool breakage monitoring Measuring probe Renishaw OMP 40-2LS Rotating inspection window Chiron Power Service Siemens CNC control with OP019 19" color display Operating mode: 4 MCIS DNC for sending and receiving CNC programs in network operation Siemens tool life monitoring Measurement in JOG (zero point determination during setup in jog mode) Loading and unloading station for tools for main time parallel tool change on background magazine Additional window for background magazine Swiveling control panel for optimal visibility of the work area during setup Note: The two vices on the NC rotary table as well as the tool holders in the tool changer are not included in the offer. Bjdpfx Amoymnykemedc

Condition: used, Year of construction: 2010, operating hours: 4,524 h, Telescopic chain work platform Teupen Leo 25 plus, AH 25 m * Platform height 23 m * Working height 25 m * Lateral reach 15m 200kg, 18m 80kg * Year of manufacture 2010 * 4524 hours according to counter * Telescopic aluminum construction * Drive via 3 cylinder Kubota diesel engine + 230 volt light current * Hydraulic 4 point support variable * Support dimensions 6000 x 5600 * Chain size 1660 x 240 * Profile depth 14 mm * Overall dimensions 7600 x 1750 x 2200 mm * Weight 3760 kg Bsdpoyqz Tljfx Ammjdc * Basket load 200 kg * Basket dimensions (L x W x H) 780 x 1150 x 1100 mm * Basket and Ground control * Adjustable drive * Hydraulic basket arm 930 mm * Rotatable basket We will be happy to send you more information and pictures on request. This description does not represent a binding offer and may contain errors. No guarantee for all information.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, professional portioner with rotary table and hanging section. I have many spare and wear parts for the device, such as funnels, seals, brakes, etc. Bodpfjw Emc Aox Ammodc

Condition: used, Year of construction: 1990, - incl. tools & accessories - Year of construction 1990 Technical data: - Capacity: 60 t Bedpfx Aerz R Eqommsdc - Stroke rate: 52 /min - ram adjustment: 80 mm - Table dimensions: 750 x 480 mm - ram surface: 360 x 250 mm - Table recess: Ø 170 mm - Projection: 250 mm - Motor speed: 1400 rpm - Motor power: 4 kW - Operating voltage: 400 V - Machine dimensions WxHxD: 950 x 2500 x 1900 mm - Control cabinet dimensions WxHxD: 60 x 115 x 35 mm - Weight: approx. 4000 kg

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : Gauche - Tool probe : BLUM Z NANO Bdedpjxcbulefx Ammjc

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] Bdjdpfx Amsxcbt Usmjc EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE - Tool probe : BLUM Z NANO

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces Bsdpfx Ameg Ezarsmedc -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2018, condition: new, machine/vehicle number: 6159327070, We are dissolving part of our demonstration tool inventory: Desoutter ESP1-HT PLUS control for SLBN low-voltage screwdrivers Year of manufacture: 04/2018 Article no.: 6159327070 used, fully functional without additional accessories Suitable for the following Desoutter screwdrivers:# -SLBN090 -SLBN120 ESP1-HT PLUS The ESP1 control was developed to optimize the performance of Desoutter screwdrivers and offers two speed ranges while reducing energy consumption. Bedjv Iqfzspfx Ammedc Advantages: With 2 speed options, the ESP1 offers flexibility to optimize your screwing process and ensure lasting quality. Compatible with 100 V or 240 V inputs for a standardized platform, faster readjustments and lower total cost of ownership. Other tools for industrial manufacturing and maintenance on request.

Condition: excellent (used), two bottom heads one side - right head Bjdpfx Amsyxcv Ssmedc heads with 21 spindles spindles span 32mm motors 3x1,1kW 2 pneumatic pressure regulation of span between heads right/left spindles