Used Level Controller for sale (48,439)

Condition: excellent (used), We are offering a Weiss climate test chamber with humidity control! The chamber was serviced by Weiss/Vötsch as recently as December 2020. All tests were performed, and we conducted an additional test run on-site; humidity and temperature levels were verified using calibrated instruments. The chamber has undergone annual inspections and is in impeccable condition! The logbook is included. WEISS 1500SB/010JU/40DU Temperature range: -40°C to +180°C Humidity: 15% to 95% Ksdpfxezn U A Tj Adqodr Climate operation: +10°C to +95°C Test chamber volume: 1,500 liters Internal dimensions: 1,490 mm deep, 1,100 mm wide, 945 mm high External dimensions: 2,470 mm wide, 2,000 mm high, 1,450 mm deep Weight: approx. 1,100 kg Refrigerant: R404a (2.00 kg) The unit does not have feet and stands securely on a frame. Please feel free to contact us if you have any further questions!

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Kodpfx Adjy Tiaasqedr Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, overall weight: 1,300 kg, load capacity: 160 kg, throat depth: 3,500 mm, working height: 2,150 mm, Al-Vac Powerlift. Mobile column-boom crane with articulated arm. Mounted on a robust steel plate/base, it can be placed on a level surface and used immediately. Alternatively, it can be permanently anchored in the concrete floor if required. The lifting/lowering function is controlled by gently raising or lowering the hand directly above the hook. This makes lifting up to 160 kg feel as easy as lifting it by hand – completely effortless. Reach: 3500 mm. The innermost joint of the boom pivots approximately 270 degrees, and the outermost joint pivots slightly further. This allows access to the entire column. Load capacity: 160 kg. Kdjdpfxjywti Tj Adqer Lifting height: 2150 mm + 120 mm base. Overall height: 3560 mm + 120 mm base. Height under the boom: 3330 mm + 120 mm base. Loading and delivery possible for a fee. Disassembly for more economical transport is possible. The crane requires a 230 V plug and is then ready for immediate use. Incredibly easy to operate. The crane is from 2011, but is mechanically almost new. A comparable new unit costs approximately 26,000 euros today. A functional video can be sent via WhatsApp.

Condition: used, Year of construction: 2014, Used Machine Year of manufacture: 2014 Condition: The machine has been factory-overhauled by Ganner Features and Technical Specifications: Complete standard configuration including: - Support with linear guide consisting of: 1 single-spindle horizontal drilling unit, 0.65 kW motor, 70 mm stroke Tool speed selectable via operator software (3000/5000/8000 rpm) 1 blow-out, gluing, and dowel-driving station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1300 mm, travel speed max. 105 m/min. - Z-axis manually adjustable via mechanical digital counter, position adjustable via support table 5–40 mm - Dowel drive-in overhang adjustable from 7–20 mm via a mechanical digital counter; drilling depth from 0–35 mm (for drill bit length GL 70 mm) is automatically adjusted with the drive-in overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GLUE/WATER selector switch for flushing the glue system, each with: 1 stainless steel tank for 7.5 kg of glue and 7.5 l of water - Indicator light showing remaining glue levels in the glue tank - 1 left side stop, 1 right side stop, and 1 center stop (all removable) - 4 start buttons for individual processing of 1–4 workpieces - 4 pneumatic 10° angle clamping cylinders for workpiece thicknesses up to 80 mm, workpiece length (Y) min. 70 mm - 1 extraction funnel, connection Ø 80 mm - 1 TCT control unit with: Built-in industrial PC, including Beckhoff TWINCAT soft PLC, operating temperature range 0–50°C, 15-inch capacitive TFT industrial touchscreen, operating system: WINDOWS 7 - Programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensions, automatic workpiece mirroring and operation optimization, 4 work areas assignable to different programs, graphical workpiece display, parametric programming, zero-point offset, programmable worklists, error diagnosis with plain text Optional equipment: - 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle Kdjdpfxezlbrvs Adqjr - 1 Z-axis with NC-controlled, dynamic positioning for height adjustment of the drilling and dowel-driving station (programmable from 5–40 mm), travel speed max. 30 mm/sec. - 1 single-spindle vertical drilling unit drilling from the TOP, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjustable via a mechanical digital counter from 5–40 mm, drilling depth (Z) max. 30 mm (with drill bit length GL 57 mm), Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (including drilling depth compensation, e.g., for Häfele Minifix) - 4 vertical 10° angle clamping cylinders with mount - 1 keypad with mount Availability: available shortly Location: DE-63934 Röllbach

Condition: used, Year of construction: 2020, Temperature-controlled processing tanks are vital in various industries, including food, pharmaceuticals, and chemical manufacturing, where precise temperature management is essential for product quality and safety. Here’s a detailed overview of temperature-controlled processing tanks: What is a Temperature-Controlled Processing Tank? A temperature-controlled processing tank is a vessel designed to maintain a specific temperature range during the processing of materials. These tanks are equipped with heat exchange systems, temperature sensors, and control mechanisms that ensure the contents remain at the desired temperature throughout the processing cycle. Key Features Kdsdpfx Adoy E Hy Usqor - Heating and Cooling Systems: - Heaters: Can be electric or steam-based to raise the temperature of the contents. - Chillers: Usually water or glycol-based cooling systems to lower the temperature. - Insulation: Tanks often come with insulation to minimize heat loss or gain from external environments, maintaining stable internal conditions. - Temperature Control Systems: Sophisticated controllers and sensors (like thermocouples) monitor and adjust the temperature in real-time, providing precise control over the processing environment. - Mixing Mechanisms: Many temperature-controlled tanks have integrated mixers or agitators to ensure uniform temperature distribution throughout the contents. - Material Construction: Typically made from stainless steel or other materials that are resistant to corrosion and can withstand high temperatures. Applications in the Food Industry - Pasteurization: Heating milk and other liquids to kill bacteria while maintaining product quality. - Cooking: Precise temperature control during cooking processes (e.g., making sauces, soups, or jams) to ensure proper texture and flavor. - Fermentation: Regulating temperatures during fermentation processes (e.g., beer, yogurt) to ensure the right conditions for microbial activity. - Storage: Maintaining the quality of sensitive ingredients (like chocolate or dairy) by controlling temperatures to prevent spoilage. Advantages of Temperature-Controlled Processing Tanks - Quality Assurance: Consistent temperatures lead to uniform product quality, flavor, and texture. - Safety: Helps in maintaining food safety standards by ensuring thorough cooking or pasteurization processes. - Energy Efficiency: Advanced control systems can optimize energy use, reducing operating costs. - Versatility: Suitable for various processes including heating, cooling, and maintaining temperatures for different food products. Considerations - Control Precision: The accuracy of temperature control systems is crucial; look for tanks with advanced control features for better reliability. - Cleaning: Ensure that the tank design allows for easy cleaning to comply with sanitation standards, especially in the food industry. - Integration: Consider how easily the tank can be integrated into existing processing lines and systems. High shear mixers are essential equipment in the food processing industry, particularly for emulsifying, blending, and homogeneously mixing ingredients with varying viscosity levels. Here’s an overview of how they work and their applications: What is a High Shear Mixer? A high shear mixer is designed to create high shear forces that thoroughly mix ingredients together. It typically consists of a rotor-stator assembly where the rotor rapidly spins, creating a vacuum that draws ingredients into the m...

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Amis ZBP 50 S Duo sawdust briquetting machine Year of production 2019 Load capacity up to 140 kg depending on material 3.800 working hours Briquettes Ø 50 mm Tank with a capacity of 1.2 m³ Roller with feeder Pre-ironing Screw conveyor Hydraulic pump motors, 7.5 kW each Fan cooling Sawdust level sensor in the tank Hydraulic oil tank 100 l Kodjumwm Sepfx Adqsdr SIEMENS control system Dimensions length x width x height 3000 x 2400 x 1700 mm Weight 2000 kg The price of the new machine is 39.800 Euro

Condition: used, Multivac R272 CD Darfresh Thermoforming Packaging Machine The Multivac R272 CD Darfresh (MultiFresh) thermoforming packaging machine is designed for easy and efficient packaging of products in attractive vacuum skin packs (VSP). This packaging technology offers several advantages: Extended product shelf life The product remains securely fixed in place and does not shift during transport Premium product presentation with an attractive appearance The excess film along the sides is removed by two rewind rollers, while small film remnants are extracted by an integrated scrap film suction system. Packaging functions: Vacuum packaging MAP (Modified Atmosphere Packaging) SKIN (Vacuum Skin Packaging) The machine is entirely manufactured from stainless steel. Technical Specifications Production capacity: up to 10 cycles/min (depending on package size, film type, vacuum level, and machine settings) Control system: Multivac PLC with a user-friendly programmable control panel Tooling configuration: one format with a 3.1 layout (142.33 × 250 mm) Kodpfx Adszlgpgoqsdr Film width: 470 mm Index length: 250 mm Loading area length: 1,600 mm Vacuum system: 250 m³/h Busch vacuum pump with a 500 m³/h booster (Roots) pump Water supply pressure: 1–7 bar Compressed air pressure: 6–8 bar Power supply: 400 V (3+N, 50 Hz) Power: 20 kW Weight: 3,000 kg Year of manufacture: 2005 Machine dimensions (W × D × H): 8,200 × 1,100 × 2,200 mm Thermoforming Packaging Process The bottom film is unwound from the roll. The bottom film is heated and formed in the forming station. The formed trays are transported forward. Products are loaded into the trays in the loading area. The top film is unwound from the roll. The filled packages are sealed (vacuum, MAP, or SKIN packaging). The packages are cross-cut. The packages are longitudinally cut. The finished packages are discharged for further processing, such as metal detection and/or labelling. How Vacuum Skin Packaging (SKIN) Works In vacuum skin packaging, the product is placed on a plastic tray. A specially developed skin film is heated and tightly vacuum-sealed around the product, creating a "second skin." This packaging method offers several important benefits: An attractive premium presentation Maximum product shelf life The product remains firmly in position and cannot move within the tray Ideal for upright or hanging retail display

Condition: new, Manufacturer: Schmersal Product series: PROTECT PSC1 Type: PSC1-C-100-FB1-PNPS Article number: 103011996 Device type: Programmable safety controller Supply voltage: 24 V DC Safety level: PL e Safety level: SIL 3 Safe inputs: 14 Safe semiconductor outputs: 4 Kdsdpfx Aezcguxjdqer Signal outputs: 6 Safety relay outputs: 2 Communication protocols: EtherCAT, Ethernet/IP, PROFINET IO, PROFIsafe Mounting type: DIN rail Dimensions: 112.5 × 100 × 115 mm Weight: 630 g Available quantity: 6 pieces

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,566 h, functionality: fully functional, overall weight: 25,000 kg, rotor diameter: 600 mm, number of blades: 42, total length: 9,630 mm, total height: 3,990 mm, total width: 2,547 mm, rotor length: 3,000 mm, power: 360 kW (489.46 HP), number of cylinders: 6, number of rollers: 1, For sale is a Doppstadt Büffel DW3060. This machine is one of the virtually indestructible Doppstadt machines. It is in used but good and operational condition. Can be demonstrated on-site while in operation. Can be transported on the road via axle with a suitable towing vehicle. An absolutely high-performance machine. Available immediately. Basic model DW 3060-C "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Braking system incl. ABS and lighting according to EC directive 50 mm EC tow hitch incl. attachment shoe Hydraulically adjustable support legs Splash guard (fenders inside and on the sides) Permissible total weight 25,000 kg Ksdpfxozp H Tyo Adqodr Tires 385/65 R22.5 Additional hydraulic connections Hydraulic preparation for comb screen system and drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Rear belt: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24-V electrical control Reversal of the roller by means of an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level adjustment Acoustic start-up warning Paint: 2-component paint RAL2011 orange Additional equipment: BioPower package - Engine power: 360 kW, with reinforced planetary gearbox - Multi-tooth roller, length: 3,000 mm, diameter: 600 mm - Roller teeth 174 Form C armored (42 pieces) - Comb screen system with fine strip screen - Transmission oil cooler Hydraulic drive Radio remote control NEODYM over-belt magnet for rear belt Frame for over-belt magnet Humidification system (prepared)

Condition: used, Year of construction: 2016, MORBIDELLI AUTHOR M400 KEY FEATURES 5-AXIS MACHINING HEAD "PRISMA: QUALITY AND PRODUCTIVITY AT THE HIGHEST LEVEL" XILOG MAESTRO SOFTWARE: EXTREMELY SIMPLE PROGRAMMING MATIC WORKTABLE: ONE POSITIONING FOR MULTIPLE MACHINING OPERATIONS TECHNICAL DATA AUTHOR M400 AXES Working area X-axis (stop inner side) mm 3,680 Working area Y-axis (max. loadable workpiece on rear stops) mm 1,680 Workpiece passage Z / Number of Z axes mm 170 / 1 Workpiece length with pendulum machining mm 1,650 Traverse speed X-Y axes Pro-Speed m/min 85 Speed Z-axis m/min 30 INSTALLATION Installed power KVA 62 ÷ 82 Compressed air requirement NL/min 400 Extraction air requirement m³/h 4,430 Extraction air speed m/s 25 Extraction nozzle diameter mm 250 GENERAL FEATURES CNC-controlled drilling and milling center in a portal design and worktable with workpiece supports, for performing: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutters - general milling operations 3-4-5 axes MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced by welded-in supports over the entire machine bed, making it extremely stable. The table design, with a large base, is the secret to ensuring lasting precision and stability. The machine layout enables the user to have an optimal workflow with a minimum of space requirements. The mobile portal beam is made of a solid monoblock. It is positioned in the X direction on prismatic ground guides via ball screw slides. On this mobile aggregate carrier, the working aggregate is in turn attached to prismatic, ground guides and ball screw slides. AXIS MOVEMENT The displacement of all axes takes place on prism linear guides with a large cross-section and ball screw shoes with a large contact surface, which ensure optimal sliding even at the highest speeds and accelerations. The precise and fast positioning of the moving portal (X-axis) is achieved by a pinion and rack with helical teeth. Ball screws with a large cross-section ensure the accurate positioning of the work unit along the moving portal (Y and Z axes). MOTORS, DRIVES AND INVERTERS The perfect mechanical dynamics and maximum positioning accuracy are controlled by the high-quality drives and brushless motors, which are designed to achieve a speed of up to 90 m/min while maintaining the best surface finish. CONTROL The control unit consists of a numerical control for the milling and drilling machine with "Xilog Maestro" graphical user interface on a Windows 7 operating system - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine operating interface with Xilog Maestro software Xilog Maestro Features Programming - parametric graphical programming - Import of DXF files (2D; the geometries "SPLINE", "POLYLINE 3D", lines or circle interpolation in three axes, linear in space, spiral in the selected plane - supported programming with graphics and syntax aids for drilling and milling operations - automatic optimization of drilling operations and tool changes - cycles - possibility of panel zero-point shift to perform drilling on inclined or curved panel sides Kdjdpfx Aey Dta Sodqsr

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring Kdodpfx Adezu Aibjqer - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, External Dimensions (W x D x H)1730 x 765 x 1010 mm Internal Dimensions (W x D x H)760 x 495 x 615 mm Volume 231 litres Net Weight 318 kg Capacity (Aluminium Racks 2” Boxes) - Capacity (Stainless Steel Racks 2” Boxes) - Cooling Performance -150 °C Temperature Setting Range -125 ~ -152 °C Temperature Control Range -130 ~ -150 °C Controller Microprocessor, non-volatile memory Display LED Temperature Sensor Pt-1000 Refrigeration System Cascade with auto-cascade low-stage Compressors 1100 W Refrigerant HFC Insulation Material PUF / VIP Plus Insulation Thickness 135 mm Exterior Material Painted steel Interior Material Aluminium Kedpfx Adszb Rkueqedr Outer Doors/Lid - Outer Door Lock Y Inner Doors/Lid 2 Shelves - Max. Load - Per Shelf - Max. Load - Total 207 kg Vacuum Release Port - Access Port 1 Access Port Position left Access Port Diameter 40 Casters 6 (3 leveling feet) Power Failure V-B-R High Temperature V-B-R Low Temperature V-B-R Filter V-B Door Open V-B Power Supply 230 V Frequency 50 Hz Noise Level51 dB [A] Good working condition. Please check out our other listings as well.

Condition: like new (used), Year of construction: 2022, operating hours: 11 h, functionality: fully functional, machine/vehicle number: 181070, Scope of supply for the overhead rail blast machine Blasting cabin: 100% manganese Transport system Y-rail: included Abrasive recovery hopper: included Automatic abrasive cleaning: included Automatic abrasive quantity control: included HMI: Siemens TP7 Remote access (via VPN): included Characteristics of the installed turbines Number: 2 units Drive power per turbine: 11.0 kW Speed control: included System characteristics Blasting tasks: surface finishing including cleaning, roughening, peening, derusting, descaling Workpiece designation: Various steel parts Coverage (%): depending on component Capacity (parts/hour): individual Abrasive (material and size): aluminum and aluminum-zinc abrasive or steel abrasive in various sizes possible Abrasive quantity (initial fill): approx. 1000 kg Workpiece material: steel Kdsdpfoy Avh Nox Adqjr Hook load: max. 450 kg Workpiece temperature: max. 80° C Workpiece height: 1300 mm Part diameter (min/max): 1100 mm Sound pressure level without soundproofing: approx. 85 - 90 dB(A) Optional offers: Dry filter including secondary filter EUR 18,880.00 Pipework 5m EUR 1,980.00 Technical data of the filter system: Type: dry filter Air flow capacity: 2,600 m³/h Filter surface area: 36 m² Residual dust concentration: ≤ 2.0 mg/Nm³ Residual dust concentration with after-filter: ≤ 1.0 mg/Nm³ Supervision and installation starting from EUR 3,500.00 The system is delivered in CE-compliant design. Exempted are linked systems or systems where essential components are added or modified by the customer. In such cases, AGTOS provides an installation declaration. Upon request, we are happy to send you a layout plan.

Condition: used, Year of construction: 2007, operating hours: 17,000 h, Equipment: all wheel drive, TEREX DEMAG AC 35 L TELESCOPIC LIFT Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2007 ? HOURS: 17 000 mth EQUIPMENT: ? ABS ? POWER STEERING ? CAB ? ALL WHEELS CONTROL ? LEVEL COMPENSATION 360 DEGREES FULL ROTATION MAXIMUM CAPACITY: 3,5 t SUSPENSION: HYDRAULIC CONTROL: JOYSTIC TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR Kdodjzm Ekrepfx Adqsr * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) Ref nr: 51317

Condition: like new (used), Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: RA9VE021000061, overall weight: 2,000 kg, stack height: 300 mm, type of input current: three-phase, total width: 1,600 mm, total length: 7,000 mm, total height: 1,500 mm, input voltage: 400 V, input current: 16 A, Konica Minolta AccurioPress C3080 color digital press, year 2018. The machine was initially used as a showroom demonstration unit, then taken over by means of a leasing contract in 2022. It was only operated briefly for a few months before being shut down due to a business closure. After it was taken out of production, it was powered down, packaged, protected, and stored under appropriate conditions. The last meter reading, dated July 8, 2024, shows 18,562 black & white impressions and 494,520 color impressions—a very moderate usage level considering the print engine’s capacity and the model’s expected lifespan. Kdedpfx Asx Syghsdqsr It is equipped with the following options and modules, among others: DF-706 document feeder, EF-103 envelope kit, inspection lamp, HT-511 heater/dehumidifier, MB-508 bypass tray, PF-707m vacuum feed unit, HT-506 thermostat, FA-502 connection kit, FS-532 stapling unit, PK-522 punching kit, HM-103 humidifier, RU-518 relay unit, SD-513 folding and stapling module, TU-503 head and foot trimming, CR-101 creasing kit, FD-504 spine press option, IQ-501 intelligent quality control unit, VI-511 and VI-509 interface kits, Fiery IC-313 print controller, and Monitoring connection.

Condition: used, FANUC A06B-6124-H109 Servo Amplifier Module Welcome to the Fanuc A06B-6124-H109 servo amplifier, a masterpiece of precision and performance. This servo amplifier is the ideal solution for industrial applications that demand the highest levels of accuracy and reliability. Developed by Fanuc, a global leader in CNC control technology, the A06B-6120-H075 stands for quality and innovation. With its impressive power output and robust design, this servo amplifier is perfectly suited to meet the most demanding requirements of modern manufacturing environments. Its precise control and fast response times ensure outstanding performance across a range of applications, from machine tool control to robotics. Experience the unmatched precision and reliability of the Fanuc A06B-6120-H075 servo amplifier and take your industrial applications to a new level of performance. Kdjdpfx Adjyn Saqoqjr

Condition: used, FANUC A06B-6124-H109 Servo Amplifier Module Welcome to the Fanuc A06B-6124-H109 Servo Amplifier, a masterpiece of precision and performance. This servo amplifier is the ideal solution for industrial applications that require maximum accuracy and reliability. Developed by Fanuc, a global leader in CNC control technology, the A06B-6124-H109 stands for quality and innovation. With its impressive power and robust design, this servo amplifier is perfectly suited to meet the most demanding requirements of modern manufacturing environments. Its precise control and rapid response times ensure outstanding performance in various applications, from machine tool control to robotics. Kjdpfx Adsyn Sadeqodr Discover the unparalleled precision and reliability of the Fanuc A06B-6124-H109 Servo Amplifier and take your industrial applications to a new level of performance.

Condition: excellent (used), Huber Unichiller 060Tw water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 060Tw Equipment type: Water-cooled recirculating chiller Temperature range: -20 to +40 °C Cooling capacity: up to 6 kW Offered is a used Huber Unichiller 060Tw with a water-cooled refrigeration unit and Pilot ONE touchscreen control. The unit is designed for the precise cooling and temperature control of external closed circuits and is suitable for applications such as process cooling, machine cooling, laboratory applications, chemical processes, and technical and industrial systems. Technical data: Temperature range: -20 to +40 °C Temperature stability at -10 °C: 0.5 K Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Safety class: I / NFL Protection class: IP20 Cooling capacity at +15 °C: 6.0 kW Cooling capacity at 0 °C: 5.0 kW Cooling capacity at -10 °C: 3.1 kW Cooling capacity at -20 °C: 1.7 kW Power connection: 460 V / 3 phases / 60 Hz Max. current draw according to nameplate: 6.7 A Refrigerant: R507 Refrigerant charge: 1.2 kg Max. pressure: 25 bar CFC- and HCFC-free Circulating pump: C3 Max. flow rate: 122 l/min Max. delivery pressure: 5.6 bar Kjdozui Uqopfx Adqedr Pump connection: G1 1/4 male Cooling water connection: G1/2 male Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Cooling water consumption: approx. 70 to 330 l/h, depending on the inlet temperature Min. fill volume: 5.9 l Expansion volume: 7.5 l Permissible ambient temperature: +5 to +40 °C Control: Huber Pilot ONE controller 5.7" color touchscreen Graphical temperature display Program and ramp functions Digital level indicator Multilingual user interface Ethernet USB Host / Device RS232 / Serial Pt100 connection for external temperature sensor Dimensions: Dimensions: approx. 600 × 600 × 1450 mm (W × D × H) Net weight: approx. 213 kg Equipment: Water-cooled refrigeration unit C3 circulating pump Pilot ONE touchscreen controller Stainless steel housing Stainless steel circulating pump Atmospherically open expansion tank Copper-brazed evaporator Digital level gauge Main switch Ethernet, USB, and RS232 interfaces Pt100 connection Cooling water and process connections Castors Connection hoses as shown in the pictures Shipping data: Dimensions: approx. 600 × 600 × 1450 mm Weight: approx. 213 kg net Shipping by freight forwarder possible. Scope of delivery: 1 × Huber Unichiller 060Tw recirculating chiller Connection hoses and accessories as shown in the pictures. Condition: Used. Optical condition as shown in the pictures. The unit is available upon agreement. Scope of delivery as pictured. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 2016, functionality: fully functional, Timber sawing line with horizontal band saw and timber outfeed mechanisation, including control cabinets and hydraulic unit. The roller conveyors are each 11 metres long. The mobile band saw is set up stationary and axles, wheels, tow bar and mudguards are present. Comes with 12 associated saw blades. Available from mid-April/May Mobile saw Wimmer Zenz BN110, year of manufacture 2016, equipped as follows: Manufacturer: ZENZ Type: MOBILE SAW (MOBILSÄGE) Model: BN 110 Equipment: Clearance: 110 x 130 cm Cutting width: 95 cm Cast iron wheels, 850 mm diameter Band saw blade width: 100 mm Drive motor: 22 kW Length: 11 m with drawbar Width 2.55 m, height 2.70 m Weight: 3,500 kg Vertical support: 5.00 Log turner: 1.00 Level adjustment with claws: 4.00 Log roller: 2.00 Pre-cutter: 1.00 Official operational permit for overrun brake: 1.00 SPS control Band saw blade 6000x100x1.1 mm stellite Kdsdjypat Ijpfx Adqjr Water cooling with 20 l barrel 20 l barrel and nozzle mounted on the blade guide Chain turner: 2.00 Extension 3 m without support beam Chip collection box

Condition: used, This listing is for a Thermo Fisher Scientific RC 3BP+ Centrifuge The unit is in full working condition and is ready for immediate release. Key Features & Capabilities The RC 3BP Plus is designed for large-batch/volume processing: for example one rotor option handles 6 × 1 000 mL bottles or 12 blood-bags. Maximum speed of up to 5 000 rpm, producing a maximum relative centrifugal force (RCF) of about 7 277 ×g. Refrigeration/temperature control: The unit offers temperature setting range roughly from –10 °C to +40 °C (or around +2 °C to +40 °C depending on source) and is capable of keeping sample chamber temperature stable. Microprocessor control with programmable run-profiles: 15 stored programs, features such as “Accumulated Centrifugal Effect (ACE)”, Step-Mode runs, slow-start/stop, etc. Quiet & robust operation: Noise level at maximum speed is under ~58 dBA. Safety and build quality: The rotor chamber, baseframe and guard ring are made of high-strength steel; automatic lid lock; electronic imbalance detection; door cannot open during spin; machine cannot start if door open. Technical Specifications (summarised) Here are some of the important specs to consider: Maximum speed: 5,000 rpm. Maximum RCF: ~7,277 ×g. Minimum speed: ~300 rpm. Temperature control range: Approximately –10 °C to +40 °C (or +2 °C to +40 °C depending on spec sheet) for samples. Capacity: 6 × 1 000 mL bottles or 12 × 250 mL blood bags (depending on rotor/adapter). Noise at max speed: < 58 dB(A). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). Dimensions: Height ~1178 mm (46.3 in), Width ~800 mm (31.5 in), Depth ~905 mm (35.6 in) (varies by version). (≈981 lb) Drive: high-performance induction motor Intended Usage & Applications This centrifuge is suited for laboratories that need to process large volumes and relatively low speeds (compared with ultra-centrifuges). Some typical uses include: Blood banking/separation of large bag volumes. Ksdpfjxukh Esx Adqodr Bulk processing of bottles (1 L size) for sample prep. Applications where sample temperature control is important (hence the refrigeration). Labs requiring strong reproducibility via programmable runs, slow-start/stop, step modes

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer Kjdpfx Ajyxy D Todqsdr - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity Kdjdow Dcdyopfx Adqjr • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 31.212.003.252, total height: 1,800 mm, total width: 2,000 mm, total length: 2,800 mm, overall weight: 2,750 kg, stroke length: 500 mm, workpiece diameter (max.): 250 mm, power: 3 kW (4.08 HP), For sale is a high-quality Fässler AG D250C gear honing machine, designed for the precise finishing of gears. For decades, Fässler has been recognized as one of the leading specialists in honing technology and is known worldwide for its highest precision and process reliability in gear manufacturing. Ksdpfx Adozd T Tisqodr The D250C is ideally suited for the machining of spur gears and transmission components in the automotive, mechanical engineering, and drive technology sectors. Thanks to its robust construction, precise CNC control, and proven Fässler technology, it enables excellent surface qualities, reduced noise levels in the gears, and the highest dimensional and geometric accuracy.

Condition: new, Year of construction: 2022, operating hours: 5 h, functionality: fully functional, overall weight: 290 kg, total length: 1,430 mm, total width: 660 mm, total height: 1,250 mm, fuel type: electric, volume flow: 15 m³/h, noise level: 54 dB, protection type (IP code): IP55, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Scroll compressor with integrated compressed air treatment system Manufacturer: AIRPOL (Poland) - 2022 Model: SRKT 2 The compressor delivers oil-free air, dried to a pressure dew point of +3°C. Operating hours: 5h Overpressure: 0.8 MPa Kedpfoxyhdbox Adqsdr Capacity: 14.4 m³/h Dimensions (L x W x H): 1430 x 660 x 1250 mm Compressed air connection: G½ Weight: 290 kg Tank capacity: 240 litres Ambient temperature range: +5 to +40°C Cooling air requirement: 400 m³/h Compressed air temperature: approx. 15°C above ambient temperature Refrigerant: R134A - 0.35 kg Noise level: 54 dB(A) Drive transmission: belt drive Nominal motor power: 2.2 kW Motor energy efficiency class: IE3 Motor protection rating: IP55 Power supply: 400/3/50 V/Ph/Hz Recommended supply cable cross-section: 5x1.5 mm² Protection: A16 Dryer pressure dew point: +3°C Compressed air purity class according to ISO 8573.1: 1.4.1 Microprocessor controller: MS-286 Airpol Power Control

Year of construction: 2025, operating hours: 225 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: VAUZ1973LZT031244, Liebherr Telescopic Handler T 33-10, Generation 6 For sale is a Liebherr telescopic handler T 33-10, originally owned, acquired as new from an authorized Liebherr dealer. Used exclusively in biogas and substrate logistics. Maintenance performed according to manufacturer specifications throughout, records available. ENGINE AND DRIVE - Deutz TCD 3.6 L4, 4-cylinder inline engine, water-cooled, turbocharger with intercooler - 105 kW / 143 hp, 3.6 l displacement, 500 Nm at 1,600 rpm - Emission stage EU V / Tier 4f, electronic common rail fuel injection - Hydrostatic closed-loop drive, infinitely variable - Permanent all-wheel drive, 45% limited-slip differential in the front axle - 3 electronically adjustable steering modes, full lock in 3.5 turns - 20 km/h, 41 kN traction force, reversible fan drive LIFTING AND WORKING HYDRAULICS - Max. load capacity 3,300 kg, lifting height 9,747 mm, reach 7,176 mm - Load capacity at max. lifting height 1,500 kg, at max. reach 300 kg - Working hydraulics 106 l/min, single-lever control via multi-function joystick - Lowering brake valves on lifting, tilting, and telescopic cylinders - Auxiliary work circuit on the telescopic head, adjustable flow rate - Hydraulic quick hitch Liebherr Compact and Stereo - Tilting kinematics 126.4°, telescopic cylinder with end-of-stroke damping Kdjdjztakyjpfx Adqer CABIN - Elastomer mounting, integrated ROPS/FOPS structure internally - Tinted safety glazing front and roof, one-piece windshield wiper - Windshield washer system front and rear, rear window tilting - Driver's door with opening window, lockable when open - 3-stage fan with fresh air intake and filter - Steering column tilt adjustable via foot pedal, driver's seat with artificial leather upholstery SAFETY AND EQUIPMENT - Overload warning device EN 15000 with automatic shut-off, audible/visual - Hill start assist Auto Hill Assist, level adjustment via the front axle - Battery main switch with automatic battery disconnection - Air filter with automatic dust extraction - Central lubrication system, tool-free access to telescopic cylinder lubrication - Work spotlights 2x front, 2x rear, display matrix - Liebherr hydraulic oil HVI (-20 to +40 °C) - Tires Firestone Duraforce-Utility 460/70 R24 INCLUDED ACCESSORIES All attachments fit the hydraulic Liebherr quick hitch and were acquired new along with the machine. - Pallet forks detachable - Fixed pallet fork, load capacity 3.6 t, fork length 1,200 mm - Light goods bucket LSB 3.0 m³, width 2,500 mm, undercutting blade, overflow guard, wear strip hardened steel 400 HB (bulk density max. 0.2 t/m³) - Lattice boom extension 3.9 m - Front sweeper FKM 2.4, working width 2,500 mm, mounting plate CAT 2, hydraulic dirt collection container, splash guard, parallelogram mounting system with pivot joint, mechanical adjustment via locking lever, height adjustment via fine-step locking system, polypropylene sweeping roller also suitable for snow removal, 3 heavy-duty swivel rollers, support legs, lashing eyes TRANSPORT DIMENSIONS Length 5,104 mm, width 2,327 mm, height 2,465 mm, operating weight 8,050 kg SCOPE OF DELIVERY Operating manual digital (MyLiebherr) and printed in German, emergency kit, lifting cylinder support, complete maintenance history Inspection by appointment. Sale from commercial to commercial, price net plus statutory VAT. Transport can be arranged upon request.