Used Layher Scaffolding Material for sale (15,074)

Condition: used, Sale of a pneumatic conveying station as shown in the photos. Iasdjyyc T Tspfx Aagjt

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1580 mm Thickness 94 mm - solid steel plate - milled surface - 4 bolted lifting lugs Ijdpfx Aehwn Tusagoat - plate with several symmetrical holes Net weight 3400 kg

Condition: used, Material clamp, material gripper, load clamp carrying clamp, lifting clamp, block tongs Manufacturer: NORDGREIF Type 7548 Year of construction: 1997 Load capacity: 500 kg Gripping width: 280 to 420 mm - Width adjustment via trapezoidal thread with hand crank - Rubber protective coating on the gripping surfaces - for crane operation - with CE-marking Own weight: 50 kg sound condition Iodpfedz Spnex Aagsat

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Iajdpfx Aajhx R Etjget Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: used, Straightening and welding plate made of steel, solid material Machined steel plate from a tool frame Length 2980 mm Width 1380 mm Thickness 74 mm - solid steel plate - milled surface - 4 bolted lifting lugs - plate equipped with some symmetrical holes Net weight approx. 2380 kg Iedehwn Tiopfx Aageat

Condition: used, Tool steel, round material, shaft cut Shaft, steel block, sawn shaft Cold work tool steel 1.2842 Material section Ø 400 mm x length 165 mm Net weight: approx. 160 kg Material number: 1.2842 Material designation: 90MnCrV8 Cold work tool steel with high hardenability and good dimensional stability during hardening Used in toolmaking for cutting, punching, and embossing tools. Rollers and profile rolls, measuring tools, guide rails, paper cutting knives. Condition on delivery: annealed to max. 229 HB Tensile strength as delivered: 770 N/mm² Hardening: 790–820 °C Tempering: 220–260 °C Working hardness: 58-62 HRC Soft annealing: 680-720 °C Iajdpfx Aaogmi U Sogst - Medium alloyed cold work tool steel - Oil-hardening 4 pieces available, price per piece.

Condition: excellent (used), fuel type: diesel, color: yellow, Year of construction: 2022, operating hours: 295 h, Year of manufacture: 2022 Drive: Wheel Unladen weight: 38,500 kg CE marking: Yes Technical condition: Very good Visual condition: Very good Price: On request NEW/DEMO CATERPILLAR MH3040 MATERIAL HANDLER YEAR OF MANUFACTURE 2022 ONLY 295 DEMO HOURS!!! MAXIMUM REACH 15,490 MM MH BOOM 9.3 M (30'6") STICK 7.1 M (23'3") MAX HEIGHT 17,510 MM MAX STOCKPILE HEIGHT 5,445 MM MAX DEPTH 5,265 MM JIB PIN HEIGHT 12,195 MM 4X OUTRIGGERS HEAVY-DUTY AXLES HYDROSTATIC TRANSMISSION CAT C7.1 ENGINE TIRES 16.00-25 HYDRAULIC ELEVATING CAB CAB PROTECTION AUTOMATIC AIR CONDITIONING LCD TOUCHSCREEN MONITOR TEMPERED P5A WINDSHIELD CAMERA CE CERTIFICATE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH Iedouxr Ngspfx Aageat

Condition: excellent (used), see pictures; further extensive clamping devices available! Ijdpfx Aoha U U Rsagsat Please contact us if you are interested !

Condition: used, SPECTRO SPECTRO MAXx / LMM04 Description: For sale is an optical emission spectrometer SPECTRO MAXx, designed for professional metal and alloy analysis. The instrument is suitable for rapid and precise determination of the chemical composition of metals such as steel, cast iron, and various non-ferrous alloys. This is a proven industrial device, commonly used in foundries, laboratories, and for quality assurance. Device and Maintenance Information: - The device has been covered by a maintenance contract and maintained professionally on a regular basis. - Several programs have been calibrated annually. - Last maintenance: 22.12.2023 - Operates without a vacuum pump – flushing is performed exclusively with argon. Regularly calibrated programs: - Fe-10, Fe-15, Fe-30 - Al-10, Al-20 - Cu-20 Overview of installed programs: - Fe-01-M / Fe-10 – low alloy steel - Fe-01-M / Fe-30 – Cr / CrNi steel - Fe-15-M / Fe-15 – free-cutting steel - Al-01-M / Al-10 – pure aluminum - Al-01-M / Al-20 – AlSi alloy - Cu-01-M / Cu-20 – CuZn alloy Technical Data: Device Details: - Device type: Optical Emission Spectrometer (OES) - Manufacturer: SPECTRO / AMETEK - Model: SPECTRO MAXx - Construction: Benchtop unit Electrical Data: - Power supply: 115 / 230 V AC - Frequency: 50 / 60 Hz - Power consumption (operation): approx. 400 VA - Power consumption (standby): approx. 180 VA - Fuse: 16 A (slow-blow) Gas Supply: - Operating gas: Argon (Ar) - Argon purity: min. 4.8 (99.998%) - Inlet pressure: approx. 7 bar Argon Consumption: - Stand-by: approx. 6 l/h - Continuous operation: approx. 23 l/h - Analysis operation: approx. 200 l/h Environmental Conditions: - Operating temperature: +10 °C to +30 °C - Relative humidity: 20–80%, non-condensing Dimensions & Weight: - Size (W × D × H): approx. 600 × 740 × 460 mm - Weight: approx. 60 kg Iaedpfx Aasybcfkegst Important Note: The table shown in the photos is not included in the sale. Condition: Used Scope of delivery (see images): - SPECTRO MAXx spectrometer - PC with monitor, keyboard, and mouse - Argon unit - Original manuals and software media Subject to change and errors in technical data. For further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2007, Liebherr A924b-957 litronic TIER 3 OVERHAULED Year of manufacture: 2007 Liebherr engine 127kW Tier 3 / EPA 8 solid tyres 10.00-20 Gumasol Dozer blade Industrial mono boom 6.80m Industrial angled stick 5m Operator's cab hydraulically elevating Cabin with front protection grille Radio system Air-suspended driver's seat Positioning swing brake Lift cylinder damping Lift cylinder with pipe rupture protection Overload warning device Generator drive mounting kit Iasdpfjyt Idpox Aagst DRIVELINE WARRANTY

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. The oil drip tray is used for the storage of non-spillable or opened containers such as paint cans, paint buckets, cleaning agents, etc. The oil drip tray can be optimally placed in a shelf rack. The scope of delivery includes: 01x oil drip tray, II. choice (new goods) Manufacturer: SSI Schäfer Type: OAW 4800 Material color: sendzimir galvanized Capacity: approx. 60 liters load capacity: 200,00 kg total width: approx. 1.020 mm Usable width: approx. 970 mm Total depth: approx. 790 mm Usable depth: approx. 784 mm Iajdpjn Atm Djfx Aagst Total height: approx. 125 mm Useful height: approx. 95 mm Material thickness: approx. 3.00 mm Weight | pc.: approx. 26,960 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: excellent (used), Year of construction: 2019, Plastic raw material hopper Year of manufacture: approx. 2019 Ijdpfx Aajy Dgv Tegoat 12 units available

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 133106 & 133312, New material feeder, system Pailfeed PF803, year of manufacture 2024, unused, including control unit DS 503. Designed for reliable, clean, and bubble-free conveying of medium- to high-viscosity single-component materials from a container. Dispense module not included! Two units available. Please specify the desired quantity with your offer. Optional accessories such as UV-curing devices are offered separately. Supplier: Dr. Hönle AG. --- Please quote your price offer. Isdpfx Aow Dd Rzsagoat Sale only within Europe (EU), including Turkey, Great Britain, and Switzerland. --- Technical specifications can be found in the handout. Supplied without packaging; all warranty rights are excluded. Should you wish to dismantle the system yourself, please note this in your offer. We do not assume any liability for the accuracy of the technical data, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Iodpjx Up Igjfx Aageat Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), functionality: fully functional, empty load weight: 24,000 kg, Year of construction: 2018, Machine in very good technical and visual condition; immediately available; a very large selection of additional attachments also available. Iajdpfxey Dv S Dj Aagjt

Condition: used, functionality: fully functional, Year of construction: 2018, Machine in good technical condition; with generator; immediately available; wide range of additional attachments available. Iaedpey Dtarjfx Aagot

Condition: excellent (used), power: 160 kW (217.54 HP), fuel type: diesel, color: blue, Year of construction: 2023, operating hours: 35 h, Year of manufacture: 2023 Drive: Wheeled Number of cylinders: 6 Unladen weight: 33,800 kg CE marking: yes Technical condition: very good Optical condition: very good FUCHS MHL 350 MATERIAL HANDLER Iajdpfxsyiuqhe Aagot Model year 2023 – UNUSED DEMO VEHICLE Engine: Deutz 160 kW Boom reach: 16 m, Boom: 8.5 m, Stick: 7.2 m Hose rupture protection on the boom Cab: Fuchs Fox Cab hydraulic cab elevation Air conditioning Build: Standard Fuchs color Central lubrication Undercarriage: Mobile, 4 stabilizers 8x new solid rubber tires 12.00-20 Lighting: various lights on boom, grab, and cab Technical data Number of cylinders: 6 Fuel type: Diesel FOLLOW US ON INSTAGRAM, FACEBOOK AND TIKTOK TO SEE VIDEOS OF OUR TRUCKS/COMMERCIAL VEHICLES AND MACHINES OFFERED FOR SALE WIR SPRECHEN DEUTSCH WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: used, functionality: fully functional, Year of construction: 2008, - Machine in very good technical and visual condition - Immediately available - Sale includes: - Scrap shear: Zato FCE40 or Genesis GXP400R - Boom - Additional attachments available at extra cost Ijdpfx Aajy Dc Nvsgjat

Condition: good (used), functionality: fully functional, Year of construction: 2012, Machine in good technical and visual condition; immediately available; wide range of additional attachments also available. Iasdpfsy Dc Avjx Aagjt

Condition: new, Year of construction: 2021, approx. 480,000 pieces Cable Gland PG7 3-6.5 Grey Packed per 50 pieces Isdou Iw Efopfx Aagjat Package price for taking full quantity € 0,01 per piece

Condition: refurbished (used), functionality: fully functional, overall weight: 100,100 kg, Year of construction: 2010, - 24 m reach - Machine in very good technical and visual condition Isdsy A Tffspfx Aagoat - Immediately available

Year of construction: 1998, condition: good (used), Material separator, material selector, filter system, material separator, metering rotary valve, rotary valve, metering valve, rotary valve, conveying technology -Manufacturer: Höcker Polytechnik, material separators for paper, cardboard, corrugated board ... -Type:PMA-U Iodpox Td Ilofx Aagsat -Drive: 0.75 kW -Inlet: 590 x 610 mm -Injection air volume: max. 12000 m³/h -Technical data: see photo of the nameplate -Transport dimensions: 2020/1340/H2000 mm -Weight: 878 kg

Condition: good (used), Material test stand / final inspection  consisting of the following main components   Keyence XG-H500M Digital 5 million pixel B/W camera  Keyence XG-7701P Multi-camera image processing system/controller Keyence CA-DC21E Illumination Controller   Opto Engineering TC23096 Bi-telecentric lens  Keyence XG-H500M Digital 5 million pixel B/W camera  CCD: 2/3-inch monochrome CCD, squareElement all pixels 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlace (40.3 ms)Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Illumination Controller   Type Illumination Controller For XG/CV-5000/CV-X200/CV-X100 Series only Input: Forced lighting cut-off: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse-width modulation method (emission frequency: 100 kHz) [Change of control unit setting]. Brightness levels 255 levels digital [change of control unit setting] Number of connections Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC/24 VDC [setting via DIP switches] Power Max. 40 W (30 W per channel) Synchronisation Synchronisation via FLASH output/continuous illumination [change of control unit setting] Response time (1) Constant voltage regulation: Max. 10 ms for 12 V output, Max. 20 ms for 24 V output (2) Pulse width modulation method: Max. 1 ms with 12-/24-V output. Display LED display Supply voltage 24 VDC ±10 % Current consumption 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence xg-7701p Multi-Camera Image Processing System/Controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×) 0.093 Image circle Ø (mm) 11.0 Max detector size 2/3" Working distance (1) (mm) 278.6 wF/# (2) 8 Typical telecentricity (max) (3) (deg) < 0.06 (0.08) Typical distortion (max) (4) (%) < 0.04 (0.08) Iajdpfjg Sxmfex Aagot Depth of field (5) (mm) 77 CTF 70 lp/mm (%) > 40 Image area of the object (6)     with 1/3″ detector (4.8 x 3.6 mm) (mm × mm) 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm) 61.29 x 46.02 with 1/2″ detector (6.4 x 4.8 mm) (mm × mm) 68.82 x 51.61 with 1/1.8″ detector (7.13 x 5.33 mm) (mm × mm) 76.67 x 57.31 with 2/3″ - 5 MP detector (8.50 x 7.09 mm) (mm × mm) 91.40 x 76.24 Dimensions Mount C Phase adjustment (7)         Length (8) (mm) 336.6 Diameter (mm) 143 Weight (g) 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, type of input current: AC, laser power: 700 W, power: 3 kW (4.08 HP), Equipment: cooling unit, cw fiber laser with 750 watts as a stand-alone system or for integration into machines and systems. Iaedpfx Aajph U Anogjt Due to its high output power, this water-cooled laser is particularly suitable for tasks where a lot of heat is required in the workpiece. This includes, for example, welding metals or plastics, cutting, material removal or structuring. The optional use of a 2D galvo scanner means that the laser beam can also be guided over the workpiece using software. The laser can be modulated digitally and analogue (power setting) and can also be controlled and monitored using control software. The images show a setup with a galvo scanner. The system can also be optionally equipped with a welding head or cutting head. Laser class 1 can also be achieved by installing side walls and a front door with a laser protection window (all available). The work area can be adjusted in height using an electrically controlled Z axis. The laser system is prepared for integration into a higher-level system, but can also be used as a stand-alone system. In the event of integration, interfaces for interlock, emergency stop, external laser control, etc. are available. Individual components of the system can also be integrated into a system at the customer's site. We are happy to support the customer after consultation and according to their specifications. Some technical data: - maximum 700 watts optical output power - wavelength: 1080 [nm] - power consumption (without cooler): < 3,000 watts - supply: single-phase; 230 VAC / 50 Hz - analog modulation (can be used to adjust power, among other things) - digital modulation up to 20 kHz

Condition: new, power: 375.1 kW (509.99 HP), fuel type: diesel, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 3,750 mm, color: blue, gearing type: automatic, suspension: air, Year of construction: 2025, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, air conditioning, blind spot assist, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, lane keeping assist, navigation system, non-smoking vehicle, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, tachograph, tire pressure monitoring, truck registration, ADR hazardous goods equipment (EX.II / FL / AT) F-MAX L 3,750 mm wheelbase Air-suspended front axle 8.0 t 4-bellows air suspension on rear axle Alloy wheels Michelin tires Double PTO with flange at bottom Voith retarder Roof air conditioning unit Heated windscreen LED headlights RAL5010 Air horn Sun visor Technology package 5 Without spoiler Tank configuration upon agreement (600L right + 450L left or single tank of your choice) 3-year full vehicle warranty Iaodjylnazspfx Aaget Available at short notice