Used Knuth Fpk 4 for sale (57,807)

Condition: used, Year of construction: 1987, bore capacity in steel (diameter) 32 mm throat 280 mm Tsdpfx Ahoxqrd Ho Isa bore stroke 110 mm spindle taper MT 3 table-size 340 x 400 mm turning speeds 210- 2600 U/min total power requirement 1,8 kW weight of the machine ca. 325 kg dimensions of the machine ca. 950 x 450 x 1750 mm

Year of construction: 2010, condition: good (used), machine/vehicle number: 182245, table mounting size: 500 x 1050 mm movements x/y/z: ca. 800/500/500 mm spindle taper: BT 40 ISA min./max. distance table/spindle: 100/650 mm spindle turning speed range: 8000 rpm number of tool positions: 24 pieces carriages: 5 - 6000 mm/min rapid move: ca. 15 m/min spindle drive: 11/15 kW electrical connection: 400 V, ca. 20 kVA kW space needed: 2450 x 2220 x 2780 mm weight: 5200 kg Delivery time: approx. middle April 2017 Todpfsdbh Udox Ah Isa

Condition: excellent (used), Year of construction: 2012, bore capacity in steel (diameter) 62 mm arm length 350-1600 mm workpiece height max. 1250 mm distance spindle nose and table 350-1250 mm Boring depth max. 315 mm machine table 2400 x 1000 x 200 mm Turning speeds of the bor. spindle 38 - 2000 U / min spindle taper MT5 feed 0,06 - 1,00 mm/U Tsdpfx Ahoyhq T No Ija engine output 4 kW stroke drive 1,5 kW oil pump 0,75 kW total power requirement 6 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2490 x 1050 x 2780 mm Steps of spindle speed: step-less Steps of spindle feed: 8 Speed of the arm up and down: 1.2 m/min Arm moving angle: ±180 degree Spindle moving distance of each dial revolution: 122 mm Max. spindle torque: 400 Nm Max. spindle feed resistance: 16000 N

Condition: used, Year of construction: 2017, grinding length 1000 mm centre height 180 mm length 3600 mm width 1650 mm Todpfswp Tumjx Ah Ija height 1800 mm weight of the machine ca. 3,7 t

Condition: used, Year of construction: 2017, grinding length 1500 mm Tedpfx Ahjwm Rqgs Ija centre height 180 mm weight of the machine ca. 3,9 t dimensions of the machine ca. L: 4900 x 1650x 1800 m

Year of construction: 1994, condition: ready for operation (used), A Durmazlar guillotine shear distributed through Knuth is available. Working width: 3020mm, max. sheet thickness: 8mm, motor power: 18.5kW, stroke: 140mm, stroke rate: 14/min, max. pressure capacity: 210bar, oil tank capacity: 250l. Machine dimensions X/Y/Z: approx. 2650mm/3400mm/2300mm, weight: approx. 7500kg. Documentation available. An on-site inspection is possible. Tjdpfoy R Drfex Ah Iea

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, total width: 2,000 mm, total length: 3,690 mm, total height: 8,350 mm, For sale: A robust industrial steel platform staircase with four levels, suitable for use in production halls, factories, and technical installations. The structure consists of multiple landings with fixed stairs and is made of steel, equipped with safety railings (yellow) around the platforms. The staircase is designed for intensive industrial use and provides safe access to higher installations or machinery. The construction is freestanding, stable, and suitable for fixed installation on a concrete floor. Specifications: Tjdjyf Un Sopfx Ah Iea Type: Industrial platform staircase / work platform Material: Steel Number of levels: 4 Total height: approx. 8.35 meters Landing heights: 1st level: approx. 1.81 m 2nd level: approx. 3.60 m 3rd level: approx. 5.40 m 4th level: approx. 7.22 m Width: 200 cm Length: 396 cm Staircase length (diagonal): approx. 3.96 m Design: fixed stairs with intermediate landings Safety features: railings around the platforms

Condition: excellent (used), Year of construction: 2020, 1. WEISHAUPT WM-G10/4-A, (with gas duct) - Output: 100-1100 kW - Design: ZM-LN - Year of manufacture: 2020 2. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2015 (1 unit), 2013 (2 units available) 3. WEISHAUPT WM-G10/2-A Tjdpfx Aswgyrtjh Iea Design: ZM-LN Output: 75-630 kW Year of manufacture: 2021 4. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 125-900 kW - Design: ZM-LN - Year of manufacture: 2011 5. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2011 6. WEISHAUPT WM-G10/3-A, (with gas duct) - Output: 100-1000 kW - Design: ZM - Year of manufacture: 2009

Condition: used, machine/vehicle number: 127963, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, spindle mount: MK 3, drilling depth: 130 mm, total width: 420 mm, total length: 800 mm, total height: 1,800 mm, throat depth: 230 mm, overall weight: 190 kg, column diameter: 102 mm, spindle speed (max.): 1,880 rpm, spindle speed (min.): 160 rpm, Dear Sir or Madam, Tedpfsv T Ax Djx Ah Iea We are happy to answer any questions. This sale is made without any warranty or guarantee. Errors and typos cannot be ruled out. Please check the information in the PDF. No returns accepted.

Condition: excellent (used), Knuth UFM 2 universal milling machine Technical data X-axis travel (manual) 800 mm X-axis traverse path 750 mm Traverse path Y-axis 300 mm travel Z-axis 400 mm table size 1320x320 mm T-slots 5x14x63 mm Feeds Y-axis travel (8) 20 - 360 mm/min Z-axis travel 600 mm/min Spindle speed (12) 58 - 1800 min-1 Vertical spindle taper SK 40 Distance between spindle tip and table 0 - 400 mm Head rotation 45 Cone of horizontal spindle SK 50 Drive Main motor power 4 kW motor power in Z axis 0,75 kW feed motor power 0,55 kW cooling pump motor power 0,09 kW Coolant pump capacity 25 l/min Dimensions and weight dimensions 1900x1720x1750 mm weight 2100 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Tjdpjnfu Riofx Ah Isa Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, The models in the ABS-L series are fully automatic horizontal band saws designed for the precise, straight cutting of large and heavy workpieces. Horizontal band saws (without miter adjustment), like these, are specifically designed for precise longitudinal cuts and offer the highest level of stability in daily use. A rigid, double-column frame forms the core of the extremely stable construction. The central control panel allows you to control the blade feed, continuously adjust the blade speed, and clamp the workpiece hydraulically. The robust, automatic material feed system operates entirely without electronics or programming, yet still provides high repeatability and dimensional accuracy. Double-column construction for outstanding stability Workpiece feed via feed rollers integrated into the vise Hydraulic workpiece clamping Todpfezdlu Eex Ah Ija Optical detection of workpiece height Infeed roller conveyor, 1.2 m Working area Working height: 585 mm Cutting performance Cutting capacity 0° (rectangular): 600 mm x 560 mm Cutting capacity 0° (round): 560 mm Cutting capacity 0° (square): 560 mm x 560 mm Cutting speed, continuously variable: 15 m/min - 120 m/min Fence length: 500 mm Positioning accuracy, material feed: 0.5 mm Drive power Main drive motor power: 4 kW Hydraulic pump motor power: 1.1 kW Feed motor power: 0.55 kW Dimensions and weights Dimensions (L x W x H): 3.25 m x 1.4 m x 2.1 m Weight: 2100 kg Blade dimensions: 6000 mm x 41 mm x 1.3 mm

Condition: excellent (used), Year of construction: 2023, We offer this very good Format-4 tempora F600 edgebander, year of construction 2023. Tedpszak D Sofx Ah Ija If you have any questions or need more information, feel free to send us a message or give us a call. Dobrý den, prodame olepovačku Format4 Tempora F600 PUR + Eva. Stroj z roku 2023, nalepeno cca 60km hran. Vybaven glue boxem pro lepení pur technologií. Dále 2x vanicka pro rychlou výměnu barvy lepidla Pur/eva. Bližší info v odkaze zde:

Condition: used, Year of construction: 2002, x-travel 400 mm y-travel 320 mm z-travel 440 mm table-size 80 x 325 mm spindle taper ISO Sk 40 spindle turning speed range 63 - 3150 U/min quill stroke 60 mm weight of the machine ca. 1,5 t dimensions 1,8 x 1,8 x 1,9 m Tjdpfxsw Tdxij Ah Ioa Universal Milling Machine - Digital Display - Hydraulic Tool Clamp - Central Lubrication - Coolant System - Machine Light - Machine Feet - Counter Bearing - Chip Tray

Condition: used, Year of construction: 2015, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of axes: 4, number of slots in tool magazine: 16, Equipment: CE marking, For sale is a well-equipped CNC machining center, FORMAT-4 profit H10 22.32, manufactured in 2015. This machine is perfectly suited for precise processing of wood, MDF, plastics, and sheet materials. The FORMAT-4 H10 stands out for its high traverse speeds and robust construction. Particularly noteworthy are the powerful 10 kW HSK-F63 milling spindle, the 360° C-axis, and a total of 16 tool positions. Technical Data * Manufacturer: FORMAT-4 Todpey Smi Aofx Ah Iea * Model: profit H10 22.32 * Year of manufacture: 2015 * Type: CNC machining center Working Area * X axis: 3,120 mm * Y axis: 2,160 mm * Z axis: 105 mm Traverse Paths * X: 4,050 mm * Y: 2,560 mm * Z: 280 mm Traverse Speed * X/Y: 100 m/min * Z: 30 m/min Milling Spindle * 10 kW HSK-F63 milling spindle * Speed range: 1,000 – 24,000 rpm * Clockwise/counterclockwise rotation * Ceramic bearings * Air-cooled Tool Changer * 2 tool changers with a total of 16 tool positions * HSK-F63 interface * Tool slots on the machine frame and mounted laterally Additional Units * C-axis 0–360° Vacuum/Table * Matrix/grid table * 2 vacuum pumps, each 250 m³/h * Two rows of stops Control/Software * FORMAT-4 H10 control system * WoodFlash software * DXF import * 3D graphic display * Parametric programming * Tool database for up to 500 tools * Mobile operator console * Handheld terminal Additional Equipment * Automatic central lubrication * UPS for the control computer * Network/internet preparation * Central extraction system * Preparation for drilling head * Operator tools and documentation included Condition: Machine from ongoing production. Well-maintained condition. Inspection by appointment possible.

Condition: new, Year of construction: 2020, Model: KPZ-2 Type: Enclosed Working dimensions: 900 W x 1300 H x 900 D External dimensions: 980 W x 2100 H x 1600 D Operation: Electric Power: 0.69 kW x 2 Voltage: 380 V Frequency: 50-60 Hz Filter: Polyester Number of filters: 3 Filter area: 22.5 m² Fan: Aluminum Fan noise level: 74 dBa Tedpfx Ajb Al Sbjh Ioa Air flow: 10,200 m³/h Warranty: 12 months Other models KPZ-4 / 6 / 8 / ... available upon request.

Condition: used, Year of construction: 2008, machine/vehicle number: 08063895, power: 0.75 kW (1.02 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, KNUTH B180 For sale is a robust and reliable miter band saw for metalworking. Technical data: Cutting capacities: * 90° rectangular: 180 × 290 mm * 90° round: 180 mm * 45° rectangular: 100 × 120 mm * 45° round: 100 mm Band speeds: * 22 / 33 / 45 / 65 m/min Drive: * Main drive motor power: 0.75 kW * Supply voltage: 400 V Dimensions & weight: * Blade dimensions: 2360 × 20 × 0.9 mm * Machine dimensions: 1244 × 457 × 1580 mm * Weight: approx. 105 kg Todjy R T R Ropfx Ah Isa Features & advantages: * Precise miter cuts * Robust and stable construction * Multiple adjustable blade speeds * Ideal for steel, stainless steel, and other metals * Suitable for workshops and professional applications Condition: used / fully functional Inspection and test run possible by appointment If interested, please get in touch.

Condition: excellent (used), For sale: Industrial pump from the renowned manufacturer Grundfos. Model SPK 4-8 – vertical multistage pump designed for clean liquids, coolants, industrial installations, and CNC machines. Technical data: Manufacturer: Grundfos Model: SPK 4-8 A-A-A Power: 0.55 kW Speed: 2850 rpm Capacity: approx. 3 m³/h Head: up to 28 m Liquid temperature: max 90°C Country of manufacture: Denmark Condition: Tsdsywpahjpfx Ah Iea Used, fully functional. Visible signs of use (abrasions, minor corrosion – see photos). A crack is visible near the nozzle on the casing – does not affect operation (buyer to verify).

Condition: excellent (used), Year of construction: 2016, Machining center Make KNUTH Tedpfxjtiauhe Ah Ija Type EcoMill 350 CNC

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of delivery: Tedofdkb Tspfx Ah Ija 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (spacing 1,300 mm) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height at 100 mm intervals - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification of delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load capacities are reduced by wind and snow loads. The substrate must be made of concrete, level, and suitable for dowels, and must be able to absorb the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored to the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: bolted system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 2,600 mm with base section 1,000 mm Teded Tbbdjpfx Ah Iea 12 cantilever arms, 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to absorb the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system with hot-dip galvanized finish Scope of supply: 4 rack uprights, 4,160 mm high, with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (1,300 mm spacing) Fastening material (screws, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Tjded Tqalspfx Ah Ioa Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow load. The ground must be made of concrete, be level and suitable for dowels, and be able to withstand the acting loads. The ground conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The rack uprights must be anchored in the ground on-site; anchoring to the wall is not necessary and is not recommended. According to the occupational association, it is recommended that the rack uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized design Scope of supply: 4 rack uprights, height 3,500 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg Tjdpfx Ajfdkb Uoh Ioa - Including longitudinal and diagonal braces for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight services with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load capacities are reduced by the wind and snow loads. The substrate must be made of concrete, level and suitable for dowels, and must be able to absorb the applied loads. The customer is responsible for checking and ensuring the soil condition and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top edge of the upright on the top storage level.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted finish (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, 2.56 m high, with base section, 1.0 m usable depth (1.2 m overall depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m rack length (1.3 m spacing) Fastening material (screws, nuts, and washers) (*No paint damage!) Net price for self-collection: €1,490.00 plus VAT. Delivery possible for an extra charge. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Rack height 2,560 mm - Load capacity per upright 1,800 kg Todpfx Aoguk A Hsh Iea - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery time - Self-collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance notification before delivery. The material is packed in a way that allows for easy unloading. The subfloor must be made of concrete, level, and suitable for dowels, and must be able to bear the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the floor, as well as any necessary official permits. The rack uprights must be anchored in the floor on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the rack uprights have a minimum overhang of 500 mm from the top edge of the upright on the uppermost storage level.

Condition: like new (used), Year of construction: 2024, Used cantilever racking: bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,000 mm, with base section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered, and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Racking height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms can be adjusted in height in a 100 mm grid - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical support - Made in Germany - Short delivery time - Collection on site possible Our cantilever racking is manufactured exclusively in Germany. We offer reliable transport with prior notification before delivery. The material is packed in a way that allows for easy unloading. When installed outdoors, the load-bearing capacities are reduced by the wind and snow load. The ground must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The ground conditions and load-bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The racking uprights must be anchored in the ground on site; anchoring to the wall is not necessary and not recommended. According to the occupational health and safety association, it is recommended that the racking uprights have a minimum overhang of 500 mm to the top edge of the upright on the uppermost storage level. Todpjguk Dkofx Ah Ija

Condition: like new (used), Year of construction: 2025, Used cantilever rack: Bolted system in hot-dip galvanized finish Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm Tsdpfx Ahjfdkbho Iea 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal bracing for 1,300 mm center distance Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and expansion is possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in a 100 mm grid - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm distance - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Telephone technical consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable transport with notification before delivery. The material is packed in a way that facilitates easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The base must be made of concrete, level and suitable for dowels, and must be able to withstand the applied loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity, as well as any necessary official permits. The rack uprights must be anchored in the ground on site; anchoring to the wall is not necessary and is not recommended. According to the occupational accident insurance association, it is recommended that the rack uprights have a minimum of 500 mm overhang from the top edge of the upright on the uppermost storage level.