Used Illig Rdk 80 for sale (17,324)

Condition: good (used), Year of construction: 2017, functionality: fully functional, Baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2017 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2017 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-wire, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Dcjdpszk A Uiofx Aixsk Materials: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and may be revoked at any time. Inspections are possible by appointment. The sale is made against prepayment, ex works, without any warranty.

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Dcjdpfx Aiozmdkwjxok Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Dedpfxszmdhve Aixeck Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, power: 160 kW (217.54 HP), New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Dsdszmdfbspfx Aixock Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, Cutting mill Djdpfx Aezmddqoixjck Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, Cutting mill / cutting mills Manufacturer: HERBOLD MECKESHEIM Dcsdjzmc T Rspfx Aixek Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Dcodpfxszmc Tws Aixek Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, power: 160 kW (217.54 HP), Granulator TRIA 120-80 FN / Granulators New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Dedpfx Aszmc Smeixjck Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, Year of construction: 2006, Operating hours: 30,471,625 Dedpfx Ajzlg Uvsixeck Clamping force: approx. 800 t Tie bar spacing: approx. 420 mm Flow rate: approx. 103 l/min Frequency: 50 Hz Power supply: 400 V Pressure: approx. 210 bar Current: 82 A Weight: approx. 4.0 t

Year of construction: 2008, condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis, short-stroke linear axis, linear motion rail guide, linear table, positioning table -Manufacturer: RK Rose Krieger, positioning table flat short-stroke linear axis for manual adjustment -Type: RK C 80/194 Dsdpfx Aioxln N Ijxock -Travel: 50 mm -Number: 3x linear axis available -Price: per piece -Dimensions: 305/80/H45 mm -Weight: 1.6 kg/piece

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 203836, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection weight: 90 g, total length: 3,800 mm, total width: 2,100 mm, total height: 3,100 mm, overall weight: 8,500 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, For sale is a vertical injection molding machine from the manufacturer ENGEL, model Insert 330V/80 Rotary (800 kN / 80t). Technical data: Machine type: Insert 330V/80 Rotary Dodpfxsznl Erj Aixock Year of manufacture: 2015 Machine number: 203836 Design/Construction: Vertical unit with rotary table Control system: ENGEL CC300 Drive technology: Ecodrive CLAMPING UNIT: Clamping force: kN 800 (80 t) Clamping unit design: Vertical / column-free or barrier-free Table design: 2-station rotary table INJECTION UNIT: Injection unit type: Type 330 Screw diameter: 30 mm Theoretical displacement volume: 99 cm³ Injection part weight: 90 g/shot Nozzle type: Needle-close nozzle Injection unit installation position: Vertical, from above HYDRAULICS, DRIVE, CONTROL CABINET & INTERFACES: Drive concept: ENGEL Ecodrive (energy-optimized) Automation interface: Euromap 67.1 Safety systems: Light curtain / protective enclosure for the work area MACHINE DIMENSIONS, TRANSPORT, AND WEIGHTS Installation dimensions (basic machine): 3,800 x 2,100 x 3,400 Transport dimensions: 3,800 x 2,100 x 3,100 mm Required hall height: 3,800 mm Total weight: 8,500 kg Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Gjbn N Ay Dowza Dxogoil Do you need a high-quality, yet affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, Year of construction: 2015, Extendable superstructure: Yes Production country: DE Please contact Theo Lelie for more information Dcedpfx Aiezl T Uijxek

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), Dedpfxepumdcj Aixsck MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: used, Amboss + Langbein Industrial Drying Oven Amboss + Langbein WTS 20 3B – 80°C – 400 V – 5 kW For sale is an industrial drying oven / heat drying cabinet from the manufacturer Amboss + Langbein, model WTS 20 3B. Dcjdpfszimf Nox Aixek This unit is ideally suited for drying, heating, and tempering workpieces, components, or materials in workshop, industrial, or laboratory environments. The drying oven features digital temperature control, a safety thermostat, and a robust industrial design with multiple stainless steel shelves. Thanks to its castors, the unit is easily movable within the facility. Technical specifications: Manufacturer: Amboss + Langbein Model: WTS 20 3B Year of manufacture: 04/2010 Operating voltage: 400 V Frequency: 50 Hz Power: 5 kW Max. temperature: approx. 80°C Temperature control: digital Safety thermostat included CE marking Dimensions / Weight (approx.): Height: 170–180 cm Width: 80–90 cm Depth: 70–80 cm Weight: 180–220 kg Condition: used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Vötsch Type: VT³ 7006 S2-M Water-cooled Technical Specifications: Maximum specimen weight: 20 kg Test chamber volume: 60 liters Test chamber internal dimensions: Width 380 mm, Depth 430 mm, Height 370 mm External dimensions: Width 875 mm, Depth 1970 mm, Height 1895 mm Vertical arrangement of hot and cold chambers (chamber change via lift carriage) Temperature range of hot chamber: +50 °C to +220 °C (calibration value +125 °C) Temperature range of cold chamber: -80 °C to +70 °C (calibration value -40 °C) Uniform temperature distribution in the test chamber (±0.5 K to ±2.0 K) Temporal temperature deviation: ±0.3 K to ±1.0 K 80 mm duct for measurement/supply connections to the specimen SIMCONTROL software for operation and status display Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 8.5 kW Rated current: 25 A Refrigerants: R-404A, R-23 Weight: approx. 800 kg Important information for your safety as a buyer! Dcedpfszima Hex Aixok The following points are carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if required 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications and information subject to change or error!) Should you have any further questions, we are happy to answer them by phone.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,729 h, functionality: fully functional, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 980 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Spindle speed range: 0–18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 1,250 × 700 mm Operating hours Machine operating hours: 46,922 h Program runtime: 20,279 h Spindle operating hours: 20,746 h EQUIPMENT Djdpfx Aiezmry Toxock Fixed angular table 3D measuring probe Heidenhain Tool measurement in the working area with BLUM laser Vertical tool changer with 32 magazine slots Full protective enclosure with sliding doors and interior lighting Electronic handwheel Operating modes 3 and 4 Chip conveyor Coolant system 3 height-adjustable machine feet Spindle cooler Control cabinet cooler from Rittal Operating manuals

Condition: excellent (used), Weiss UV200SB Weathering Chamber / UV Aging Test Device Air-cooled, approx. 200 liters For sale is a Weiss UV200SB weathering chamber, a high-quality test device for simulating sunlight and weathering effects. This device is used for accelerated aging tests on plastics, paints, coatings, and other materials according to common standards (e.g., DIN EN ISO 4892-3). Technical Details UV Spectrum: approx. 290–450 nm (UVA/UVB) Lamp type: Fluorescent UV lamps Temperature range (UV phase): approx. +20 to +80 °C Climate cycling: Alternating between UV irradiation, condensation, and spray phases Humidity range: approx. 10% to 95% r.H. (relative humidity) at temperatures above approx. +10 °C Temperature change rate: approx. 3 K/min Test chamber dimensions: Height 750, Width 650, Depth 400 mm External dimensions: Height 1800, Width 920, Depth 1345 mm Voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 9.0 kW Rated current: 15.0 A Refrigerant: R 404A For your safety as a buyer! The following points are always carried out on our chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate Dsdpfxoziiz Hs Aixjck 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) Further questions can be answered for you by phone.

Condition: new, High-performance forestry mulcher for excavators from 6 to 8 tons The BFM 80 was specifically developed for professional work in forestry, landscaping, and for clearing and maintenance operations. With its working width of 800 mm, the mulcher is ideal for shredding brush, shrubs, branches, and wood up to a diameter of approximately 200 mm. The large-sized rotor with 16 carbide tools, combined with the robust V-belt drive, ensures high shredding performance and smooth operation. Thanks to the reinforced steel construction, the BFM 80 is designed for daily use under demanding conditions and impresses with its long service life. Your advantages at a glance Suitable for excavators from 6 to 8 tons 800 mm working width for precise and efficient work 16 carbide mulching tools with high wear resistance Shreds branches, brush, and wood up to approximately 200 mm in diameter Robust V-belt drive for reliable power transmission Three adjustable working depths for different applications Dodpfx Aozqzq Noixeck Stable and durable steel construction for professional continuous use Technical data Model - BFM 80 Working width - 800 mm Suitable for excavators - 6–8 t Max. material diameter - approx. 200 mm Working depth - -70 mm / -30 mm / +10 mm Number of working depths - 3 positions Hydraulic connections - 1× supply, 1× return, 1× leak oil line Required hydraulic oil flow - 38–80 l/min Max. operating pressure - 250 bar Drive - V-belt Rotor shaft diameter - 219 mm Rotor diameter incl. tools - 465 mm Housing thickness - 8 mm Side wall thickness - 12 mm Tools - 16 carbide mulching blades Weight - approx. 450 kg

Condition: good (used), • Fomaco injector • Type : FGM 80/320. • Conveyor length : 240cm. • Conveyor width : 70cm. • Conveyor height: 115cm. • Opening : • Width : 70cm. Height : 19cm. • Total dimensions : Dcodsd Ixi Dspfx Aixok • Length : 245cm. • Width : 120cm. • Height : 220cm. • FÆR.

Condition: excellent (used), CATALOG NUMBER 7050 TECHNICAL DATA - Wheel diameter: 800 mm - Table dimensions: 1100x800 mm - Angle-adjustable table - Motor: 5.5 kW - Max cutting height: 340 mm - Throat/clearance (blade to frame): 680 mm - Extraction port diameter: 90 mm - Dimensions (L/W/H): 1500x950x2600 mm - Weight: 987 kg Dsdjzrlfmjpfx Aixsck ADVANTAGES – Manufactured in Poland – Very good condition – Used saw Net price: 8,900 PLN Net price: 2,120 EUR based on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, first registration: 08/1998, total length: 16,000 mm, total width: 2,550 mm, Year of construction: 1998, GOLDHOFER STZ-TL 3-33/80 3-axle low-bed (gooseneck) semi low-loader with 3 steering axles, with lowerable platform and hydraulic ramps TRAILER HAS BEEN SANDBLASTED AND PAINTED!! • ABS • 3 x BPW ECO-Plus air suspension axles • 3 x steering axles • lifting/lowering system • hydraulic, 2-part access ramps • hydraulically lowerable platform • extendable to 3 m width • warning signs • NATO connector for the electric/hydraulic pump Dodewpknwopfx Aixsck • overall length: 16,000 mm • empty weight: 15,900 kg • GVW: 48,000 kg (technically possible: 48,000 kg) • payload: 32,100 kg • 4 x axle load gauges • twin tires: 235/75 R17.5 - TÜV / inspection and SP: !! new !! - German vehicle! Subject to errors and prior sale!

Condition: new, Marzocchi ALP3-D-80 gear pump, unused, 100% functional, scope of delivery as shown in the photos. Dcjdpfx Aozirp Toixek

Condition: new, Siemens 5WS40002 / 96 403 879 80 fuel distributor (Poppe & Potthoff part number: 710000), unused, 100% functional, scope of delivery as shown in the photos. Djdpfxszirqqj Aixjck

Condition: ready for operation (used), Year of construction: 2010, operating hours: 80,000 h, clamping force: 800 kN, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, product length (max.): 4,090 mm, Hydraulic injection moulding machine manufactured in 2010. This Krauss Maffei CX 80-180 features a clamping force of 80 T and a screw diameter of 40 mm. It has a shot volume of 201 cm³ and a shot weight of 183 g. The machine includes a Euromap 67 robot interface and six heating zones. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei CX 80-180 machine we have for sale. Contact us for further details. • Outer length: 670 mm Dsdpfx Aezk Elwjixjck • Outer width: 670 mm • Clamping force: 80.0 T • Screw diameter: 40.0 mm • Tie Bar spacing: 420 x 420 mm • Shot volume: 201.0 cm3 • Shot weight: 183.0 g • 6 heating zones • Hydraulic core • Includes a Sepro sprue picker with the machine

Condition: good (used), Year of construction: 1997, Used Hedelius machining center Type BC 80 X-axis: 2500 mm Y-axis: 800 mm Z-axis: 550 mm SK 50 spindle Heidenhain CNC control with Siemens motors/servos Dedpfx Aszhat Deixjck Includes tool/clamping system on the table Year of manufacture: 1999 Excluding chip conveyor