Used Idlers With New Rolls (Bb 1200Mm) for sale (26,836)

Condition: excellent (used), Year of construction: 2016, Loma Systems Metal Detector with Rejector Model: IQ³ Gkodpfx Ahev T Ah Eemea Model conveyor: MD Conveyor, serial number: G7B3C2RS-35150D Year of construction: 2016 220-240 V, 1 Ph, 50/60 Hz, 3 A Belt width: 300 mm, clearance: 350 mm x 150 mm Total dimensions: 2020 mm x 1080 mm x 1120 mm

Condition: good (used), Floor weighing scale K-PZ Weigher indicator Type: KPZ 52E-9-1 Maximum weight: 300 kg Minimum weight: 2 kg, e=: 0.1 kg, T=- 300 kg Dimensions: 800 mm x 1100 mm x 100 mm Gsdpfxex Hz Dqe Ahmoka Including ramp

Condition: used, Year of construction: 2020, Orangeworks Stainless Steel Mixer Tank Gsdpowq Sz Uofx Ahmjka Qty 2 in stock Capacity 500 LTS Load cells Mixer Ancillary equipment included

Condition: new, New Conveyor with overhead feeder hopper Both units are mobile on castors Feeder hopper with opening end door, adjustable exit gate to conveyor Feeder hopper dimensions 800mm x 740mm x 600mm deep Conveyor belt dimensions 1800mm x 230mm W x 1260mm H Conveyor height is adjustable VFD on conveyor drive Gjdpfx Aewd Nthshmoka

Condition: used, 35m3 heated tank with a connical bottom. The tank was used to store wine. The tanks have been lenghtened from 26m3 to 35m3. 3 units available. Gkjdpfxeun Nvbe Ahmoa

Condition: used, Diameter: 3.60 m Height: 10.5 m Flat-bottomed Equipped with a hatch on the side wall and top The tanks were used in the chemical industry Gksdpfxjw I R T No Ahmoa Four units available.

Condition: used, Year of construction: 1989, color: red, Applicable material: Hay Bale width: 1200 Gjdpfx Asziplrehmeka Bale height: 900

Condition: used, functionality: limited functionality, power: 87 kW (118.29 HP), gearing type: hydrostat, fuel type: diesel, empty load weight: 16,000 kg, Year of construction: 2007, operating hours: 11,500 h, Equipment: cabin, We are offering a New Holland MH CITY mobile excavator/loader with a split boom for sale. Registration number: 300/25. Defects: Oil leakage on the driveshaft, leaking swivel bearing, the electrical system is not fully functional, and the hydraulic quick coupler cannot be opened. Otherwise, the machine is roadworthy, and the engine and hydraulics are in good working order. Technical data: Engine: CNH 87 kW Operating hours: 11,xxx Year of manufacture: 2007 Weight: 16 t Equipment: Suspended seat, crane hook, hydraulic connections on the boom, manual engine speed control, radio, lighting, dozer blade. Accessories: Hydraulic quick coupler Digging bucket, 97 cm wide, 0.8 m³ volume Transport dimensions: Length: 7.6 m Width: 2 m Godpfx Ahsztvgdjmska Height: 3 m Weight: 16 t Loading and transport to the destination are possible by arrangement. The stated price is exclusive of VAT.

Year of construction: 1998, condition: excellent (used), Max. roll diameter unwinder: 750 mm (Shaft 76) Gedpfxozn Ayye Ahmjka Max. roll diameter rewinder: 320 mm Max. web width: 270 mm Description: Unwinder, splicing table, 2x web guiding system, cutting unit, rewinder, counters (meters), Nikka camera Camera Manufactured by: Nikka Research Deutschland GmbH Type: ALIS C2 Date: 2005 Description: Since May 13, 2026, the camera has only been working intermittently (outdated hardware). Although it could be repaired, the chances of success are slim; the manufacturer recommends installing a new camera system. Accessories: 1x Shaft rewinder 76 mm 1x Shaft rewinder 40 mm 1x Shaft rewinder 50 mm 1x Shaft rewinder 100 mm 10x razor blades

Condition: new, This offer is for a new ‘BDT VX 370’ long-sheet feeder Gsdpfx Asyuuc Iehmeka Item for sale: 1 x BDT VX 370 for the following machines: Canon imagePRESS V1350 incl. S-Bridge Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: new, functionality: fully functional, This offer is for a new ‘Plockmatic BLM5035S’ brochure production system Item for sale: 1 x Plockmatic BLM5035S compatible with the following machines: Canon imagePRESS V900 Canon imagePRESS V1000 Canon imagePRESS V1350 Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the unit during our business hours. Please arrange an appointment! Godpfx Ahsyuubdsmoka Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: new, Year of construction: 2024, functionality: fully functional, Item: A-11297-Silostank 95m3 Exterior dimensions: Dia Ø 3300 mm Total H 11647 mm Stainless steel tank - 3 pcs. AISI 304 Outlet height 400 mm Top of the tank: Air in/outlet 500 mm with gauge Inside : polished weld Thickness of plates: Bottom: 4 mm, Cylinder : 4 and 3 mm, Top : 3 mm Gkedpfx Aoua U Hzshmea Possible to choose color of outside plates if you need insulation.

Condition: used, Year of construction: 1999, operating hours: 7,259 h, Equipment: all wheel drive, Backhoe loader New Holland LB 115, 4 PS, with articulated steering (crab steering), tires in like-new condition, backhoe has Austrian registration documents, weight: 8,300 kg, serial number: 031015705, contact: Ivelina Redl (Russian, Bulgarian, Serbian, English, German), phone number: [phone number]. Subject to errors and prior sale! Gksdpozp Sy Eofx Ahmea Please note: Our office will be closed from August 1st, 2026, to August 16th, 2026, due to company holidays. We will be available again starting Monday, August 17th, 2026!

Condition: excellent (used), Year of construction: 2009, Beam on time: approx. 17,600 hours Laser on time: approx. 45,500 hours Includes Loadmaster. Gsdpjzcvx Tofx Ahmska

Condition: used, Year of construction: 2006, operating hours: 10,010 h, Equipment: all wheel drive, MAKE: NEW HOLLAND KOBELCO TYPE: E135SR-1E YEAR: 2006 CE: YES WORKING HOURS: 10,010 HOURS TYRES/UNDERCARRIAGE: 60% POWER: 63 KW ENGINE: ISUZU BB-4BG Gkjdpfxeyzliys Ahmea WEIGHT: 14,100 KG OPTIONS: 14,100 KG MACHINE HYDRAULIC QUICK COUPLER CLIMATE CONTROL FULL PIPING (HAMMER LINES) SORTING FUNCTION TRACKS 60% GOOD GOOD CONDITION Price is Ex VAT.

Condition: used, Year of construction: 2007, operating hours: 11,659 h, Internal vehicle number: MK300034 Available immediately at our yard in Kaufungen. More information: Gedpfxeyzk Ius Ahmska * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: repair required (used), operating hours: 2,100 h, New Holland T6.155 tractor after rollover. Starts and drives, 2100 hours. Gsdpfxsyl S S Us Ahmoka

Condition: used, Year of construction: 2012, operating hours: 7,000 h, Equipment: all wheel drive, New Holland B115C (C-Series, approx. year of manufacture 2012) 110 hp Very good condition Approx. 7000,- Gksdpfx Aexnvlvshmsa

Condition: used, This listing is for the Stuart SSM1 Mini Orbital Shaker with holder Gkodsxv A Nqjpfx Ahmsa The unit is in full working condition and is ready for immediate release The Stuart SSM1 Mini Orbital Shaker is a compact and versatile laboratory shaker designed for gentle orbital mixing. It features a 16 mm orbital motion, variable speed control up to 300 rpm, and a built-in digital timer with settings ranging from 1 second to 999 minutes or continuous operation. The shaker is supplied with a non-slip mat suitable for holding up to four multi-well plates or diagnostic cards. It can operate in incubators and environmental chambers with temperatures up to 40°C and 80% relative humidity. ​

Condition: good (used), functionality: fully functional, power: 216 kW (293.68 HP), fuel type: diesel, overall weight: 24,000 kg, Year of construction: 2008, operating hours: 9,800 h, Equipment: all wheel drive, cabin, New Holland W270B wheel loader, year of manufacture 2008, approximately 9,800 operating hours, in good condition, immediately ready for use, permissible total weight 24,000 kg, transport and delivery possible, located near Lübeck, viewing possible at any time. Gkodpszbuqljfx Ahmoa

Condition: new, Year of construction: 2026, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... Gjdpfxjmk S Slo Ahmjka We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: used, functionality: fully functional, This offer is for a used ‘Ricoh Pro 8310’ black-and-white production system Item for sale: Gksdpfxey Altbj Ahmja 1 x Ricoh Pro 8310 with the following specifications: Includes Vacuum Feed LCIT RT5120 Includes Finisher SR5110 Not the right configuration? We can easily configure the machine to your specifications. Please feel free to contact us! Meter readings: Total: Approx. 431,372 pages Condition: This is a used machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested for functionality A test printout can be seen in the photo Packaging and shipping: You are welcome to view the machine during our business hours. Please arrange an appointment! Sea-worthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: unexamined, input voltage: 220 V, Used New Brunswick Innova 4000 incubator shaker Manufacturer: New Brunswick Model: Innova 4000 With sample holders Gkjdpfx Ahey Nzp Eemoa

Condition: new, power: 18 kW (24.47 HP), fuel type: diesel, empty load weight: 1,085 kg, maximum load weight: 565 kg, overall weight: 1,650 kg, color: blue, gearing type: mechanical, suspension: other, number of seats: 1, total length: 2,760 mm, Equipment: all wheel drive, Power steering, diesel manual transmission, year of manufacture 2024, 18.2 kW, 1,319 cm³, all-wheel drive, 1 seat, side-mounted gear lever, shuttle transmission, 6 forward and 2 reverse gears, rollover bar with beacon, analog fuel gauge, rear work lights swiveling, 2 front weights at 15 kg each, 3-cylinder, power steering, total length 2,760 mm, agricultural tires, front diagonal tires: 6.0-12, rear 8.30-20, weight 1,085 kg, permissible total weight 1,650 kg. The vehicle had a one-day registration in 04/2024. FOR US, CONDITION AND FEELING ARE MOST IMPORTANT; PRICE COMES SECOND. For further questions, please contact Mr. Faller at the provided number. //*EXCHANGE, TRADE-IN, OR FINANCING OF YOUR VEHICLE POSSIBLE! All information provided without guarantee.* Gkodpswtnzpsfx Ahmja You will find more offers on our homepage. The description and specified data do not constitute a guarantee and are non-binding. The only binding agreement is the purchase contract concluded at the dealership upon purchase of the vehicle. Errors and prior sale excepted!

Condition: new, power: 18 kW (24.47 HP), fuel type: diesel, empty load weight: 1,210 kg, maximum load weight: 790 kg, overall weight: 2,000 kg, color: blue, gearing type: mechanical, suspension: other, number of seats: 1, total length: 2,895 mm, Equipment: all wheel drive, Power steering, diesel, all-wheel drive, 18.2 kW, 1,319 cm³, 1 seat, easy-shift transmission, 9 forward gears + 9 reverse gears, shuttle gearbox, side-mounted gearshift, analog fuel gauge, rear swivel work lights, roll bar, 2 front weights at 15 kg each, 3 cylinders, power steering, total length 2,895 mm, weight 1,210 kg, bias-ply tires front: 6.0-12, rear: 8.30-20, permitted total weight 2,000 kg. FOR US, CONDITION AND GUT FEELING ARE MOST IMPORTANT; PRICE COMES SECOND. If you have any further questions, Mr. Faller will be happy to assist you at the given number. //* TRADE-IN, PART-EXCHANGE, OR FINANCING OF YOUR VEHICLE POSSIBLE! All information is provided without guarantee. For more offers, visit our homepage. The description and specified data do not constitute a guarantee and are not binding. The only binding agreement is the sales contract concluded at the dealership upon purchase of the vehicle. Subject to errors and prior sale! Gkodpewtpvuofx Ahmoa