Used Hoyer Hmc3 200L 1-2 for sale (106,360)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 5104 € 98.51 € 3/4" 26,9 mm, 1" 33,7 mm, mm 5 mm 3 mm 87 kg The motor driven AL 1-2E can be used to notch pipes with an external diameter of 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2"). Gbedpfx Asyui S Rofkon Do you often have to notch pipes? If so, the motor-driven AL1-2E equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Niederlande 5932 € 114.49 € 3/4" 26,9 mm, 1" 33,7 mm, mm Gbsdsyui Sqspfx Afken 5 mm 3 mm 93 kg The motor driven AL 1-2U can be used to notch pipes with an external diameter of 27.9 mm 26.9 mm (3/4"), 33.7 mm (1"), 42.4 mm (1 1/4"), 48.3 mm (1 1/2") and 60.3 mm (2")and notch pipes with an external diameter of 22 mm to 76 mm for sink outflows. Do you often have to notch pipes? If so, the motor-driven AL1-2U equipped with a 2.2 kW electric motor is the ideal solution! The motor forms one unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with a zero voltage protection and guard. All the benefits in a nutshell: high productivity, low investments, simple and rapid operation, a number of diameters are readily available, ideal for double corner joints.

Condition: good (used), Withworth tap Make Reishauer Whithworth 1 1/2 inch 601 D Rapid Godpfsdx Ug Esx Afkobn

Condition: good (used), Tap Reishauer 1 1/2 GGL length 120 mm Gbodpsdx Uzlefx Afkon

Condition: used, Year of construction: 2015, functionality: fully functional, DrillMatic TA325/P/H/12/2/1/-180° rotating hydraulic/pneumatic index table 400x620 Manufacturer: DrillMatic Type: TA325/P/H/12/2/1/-180° Air connection: 4 ports. Index values: 3 4 6 8 12 Gbedeukg Srjpfx Afkjn Year of manufacture: 2015 Weight: 66 kg Table size: 400x620mm

Condition: new, functionality: fully functional, Year of construction: 2016, Electric chain hoist with trolley, explosion-proof, type STK2008-10 1.6 4/2 - 1 ex, lifting speed 0.80 / 5.00 m/min, lifting height 4,500 mm, load capacity 1,600 kg Gbjdpsxcx Dqjfx Afksn

Condition: good (used), mileage: 812,271 km, power: 320 kW (435.08 HP), first registration: 08/2015, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 6,700 mm, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 10,170 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2015, Equipment: AdBlue, central locking, cruise control, parking air conditioner, parking heater, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Rear working lights - Front working lights - Heated mirrors - Leaf suspension - Roof spoiler - Windscreen - Cab - Air suspension - Sleeper cab - Auxiliary heater = Notes = Daf XF440 SuperSpaceCab 6x2*4 - Cuppers 1-2-3 deck Livestock + Cuppers 3 deck trailer 2009 MY: 13-8-2015 / 18-2-2009 KM: 812271 XLRASH4100G073990 / XL9VA101092053008 76-BGG-7 / 83-WD-LH APK/TUV: 24 DAF XF440 6x2*4 SSC 76-BGG-7 812,200 km Alcoas Steering axle 1/2/3 decks Lifting roof Swinging floorboards Remote control Night air conditioning Coffee maker 2015 3-deck cuppers, approx. 2002 Cupper 3-deck trailer 83-WD-LH 02-2009 BPW axles Automatic doors Swinging floorboards Folding roof Gedpfx Afsymaqnekobn 3 decks Fans Remote control release = Further Information = Technical details Number of cylinders: 6 Engine displacement: 10,837 cc Axle configuration Front axle: Tyre size: 385/55R22.5; Max. axle load: 9,000 kg; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: leaf spring Rear axle 1: Tyre size: 315/70R22.5; Twin tyres; Max. axle load: 11,500 kg; Tyre tread left inner: 50%; Tyre tread left outer: 50%; Tyre tread right inner: 50%; Tyre tread right outer: 50%; Suspension: air suspension Rear axle 2: Tyre size: 385/55R22.5; Lift axle; Max. axle load: 7,500 kg; Tyre tread left: 50%; Tyre tread right: 50%; Suspension: air suspension Weights Unladen weight: 14,507 kg Payload: 13,493 kg Gross vehicle weight: 28,000 kg Functional Body brand: ZF Maintenance, history, and condition APK (MOT/TUV): valid until 08.2026 Technical condition: good Visual condition: good Identification Registration number: 76-BGG-7 Further information For more information, please contact VAEX The Truck Traders.

Condition: used, machine/vehicle number: MAC112-76348, overall weight: 50 kg, Rexroth Indramat MAC112C-1-KD-2-C/130-A-1/S005 Servo motor / permanent magnet motor Gbedpfx Afsx H I Tfokon

Year of construction: 2008, condition: good (used), functionality: fully functional, W2-C | TILTING DEVICE FOR MEAT TRUCKS | Double tilting lift (2 x 200L trucks) Model / Type: W2-C Year of manufacture: 2008 Power supply: 400 V / 3 phases / 50 Hz Overall dimensions: 2300 x 1200 x 1200 mm The W2-C, an industrial, two-station tilting device for meat trucks, is an indispensable element in automating internal transport in medium and large food processing plants. The device is designed to facilitate the work of operators, eliminate heavy physical labor, and accelerate the technological process when supplying raw materials to upstream machines (such as vacuum mixers, blenders, meat grinders, dicers, metal detectors, feed hoppers for packaging machines, or sorting lines). The uniqueness of the W2-C model lies in its dual configuration (2 x 200L), which allows for the simultaneous handling of two meat trucks. This solution doubles the efficiency of the loading station, enabling smooth and continuous dispensing of raw materials – while one truck is being emptied, the other can be prepared for lifting, or the machine can mix two different batches of raw materials directly at the discharge point. The tilting process is carried out in a controlled and safe manner. The angle of rotation of the gripping pocket is designed to ensure complete, 100% emptying of the truck, even with thick, sticky, or heavily chilled fillings and meat mixtures. The entire system is controlled via an ergonomic and intuitive panel, ensuring maximum operator safety at the workstation. Gbjdpfxsy Uflno Afkjn

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Drive system: FA-C 3728 133-1 -Travel speed: 5/20 m/min Gbjdpfx Aetlzdqjfken -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Quantity: 1 crane trolley available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/unit

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 2008-16 2/1 -Load capacity: 1500 kg -Travel speed: m/min -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Lifting height: approx. 8.5 m -Transport dimensions: 1120/1020/H380 mm Gsdjq Tvpxjpfx Afkebn -Weight: 251 kg

Condition: good (used), Year of construction: 1999, Overhead crane, crane, electric hoist, manual trolley, trolley, crane trolley, crane trolley, crane trolley, trolley, girder trolley, monorail trolley, hoist -Manufacturer: Steel, crane chassis with electric cable winch -Cable pull: Type AS 2008-16 2/1 -Load capacity: 1500 kg -Roller spacing: 153 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Main stroke/fine stroke: 8.0/2.0 m/min -Lifting height: approx. 9.0 m -Drive unit: FU-A 11 43 22 -Travel speed: 20.0/5.0 m/min -Transport dimensions: 1120/1020/H380 mm -Weight: 226 kg Gbsdpfxetnlz Ue Afkjn

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic functions, excluding hydraulic winches * Approx. 40 mm thick hardwood decking above the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Bracket at the rear of the gooseneck for ALU loading ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the front wall * 1 pair of stake pockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (located on the inside of the chassis rail) EQUIPMENT: * Loading platform length approx. 8,800 mm, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * A recess in the loading platform, extending into the tapered section to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the selected loading platform length * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg with air suspension and raise/lower valve * 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * Throughout the loading platform and between the axles, interrupted approx. 50 mm thick hardwood decking (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the telescopic tube with large cross-section. Intermediate table with offset loading platform and extendable mounting rails for aluminum bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) Gedpfx Afey Auh Iekobn * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom (in case vehicle is equipped with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between 1st and 2nd axle * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if vehicle is equipped with extendable widenings) * Lockable aluminum elements installed on the extension tubes of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasting painted...

Condition: new, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2011, total length: 14,040 mm, total width: 2,600 mm, total height: 4,000 mm, wheelbase: 9,300 mm, Year of construction: 2011, Axle configuration Rear axle 1: Lift axle; Max. axle load: 9,000 kg Rear axle 2: Max. axle load: 9,000 kg Gjdpfx Ajyza Hmjfkebn Rear axle 3: Max. axle load: 9,000 kg Weights Unladen weight: 12,920 kg Payload: 26,080 kg Gross vehicle weight (GVW): 39,000 kg Maintenance APK (main technical inspection): valid until 08/2026 Condition Overall condition: very good Technical condition: very good Visual condition: very good

Year of construction: 2001, condition: excellent (used), Technical data / Standard dimension: Working heights between 650 to 1800 mm per grinding unit Oscillation angle 0° to 90° L/R – adjustment by using 2 grinding units up to 2200 mm Controls Siemens Motor power 3,0 kW Grinding belt speed up to 25 m/s Pneumatical grinding belt tensioning Gbsdpfeign Idox Afksn

Condition: excellent (used), Ml Io = 10.4/12.8 A 60/100 k Mn 4.0 Nm S1 3000/min Ui = 150 VY Gbsdpfjd Atrrsx Afken IEL 63 IM B5 / P64 I.CLF VDE 0530 PTC thermistor 3 ~ 1 x FU 1050-6HF 13.3 mVmin equipped with encoder HEIDENHAIN

Condition: excellent (used), Mo = 14.0/18.5 Nm Gbjdpfx Afjd Atrxjksn Io = 31.0/39.5 A Mn = 14.0 Nm Speed S 1 3000 n Ui = 150 VY 3 ~ 1 FU 1050-GF 13.5 mVmin Space requirement: 220 x 140 x 200 mm equipped with rotary encoder HEIDENHAIN

Condition: ready for operation (used), machine/vehicle number: 64532, used hand hydraulic tube bending machine existing bending segments: 3/8, 3/4, 1 1/4 u. 2" space requirement: 850 x 640 x 780 mm Gsdpfx Afodzw Hweksbn

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 8,093 h, load capacity: 3,500 kg, lifting height: 6,500 mm, mast type: triplex, power: 36 kW (48.95 HP), Equipment: cabin, lighting, sideshift, UNiCARRIERS Diesel Forklift - NISSAN YG-1-F-2-A-35-U Year: 2015 According to hour meter: 8,093 operating hours 3.5 ton lifting capacity 6.5 meter lifting height!! 3 meter overall height 36 kW Nissan engine - Triplex mast with full free lift - Side shifter - Load guard Gbodpfey Ir Hrex Afkjn - Cabin with heating - Lighting system - Original paint - Immediately ready for use - Front tires in good condition - Rear tires NEW! - Simple mechanical forklift! Sales price: €10,900 net Affordable delivery available!

Condition: excellent (used), axle configuration: 3 axles, first registration: 11/2011, tire size: 385/55/22.5, Year of construction: 2011, Lifting roof Separate floor/two-cylinder system Independent operation Remote control = Further information = Gsdpfoyxw A Tsx Afksbn Tyre size: 385/55/22.5 Rear axle 1: Steered; Tyre tread left: 65%; Tyre tread right: 65% Rear axle 2: Tyre tread left: 65%; Tyre tread right: 65% Unladen weight: 10,800 kg Technical condition: very good Visual condition: very good

Condition: used, This listing is for a Pall Allegro 1/2" Single Use TFF System. The unit is in full working condition and is ready for immediate release. This Unit is fitted with a Ismatec Flowmaster FMT 300 peristaltic pump. This unit is supplied with Trolley and containers. The Pall Allegro 1/2" Single Use TFF System is a cutting-edge solution designed specifically for tangential flow filtration (TFF) in bioprocessing applications, combining innovative single-use technology with user-friendly design. Unlike traditional TFF systems, the Allegro system incorporates new concepts that enhance ease of use and efficiency, featuring a carefully considered layout that allows full access to components from one side. Key Features: Single-Use Design: Eliminates cross-contamination and cleaning requirements, enhancing system flexibility and ensuring a sterile environment. Integrated Sensors: Equipped with single-use sensors that track key process parameters, provide notifications for out-of-spec conditions, and enable automated control for optimal processing. Easy Setup: Comes with five pre-irradiated manifold sets (feed, retentate, permeate, bio container, recovery) that are ready for installation, typically taking just 20 minutes. Gbjdpfxjxxyfzj Afkjn Automated Operation: Fully automated for monitoring and controlling critical parameters, ensuring consistent performance throughout ultrafiltration and diafiltration processes. Technical Specifications: Capacity: Features a recirculation pump with a capacity of 1,000 L/hour, designed to accommodate 0.5 - 2.5 m² cassettes running at a crossflow of 5 L/min/m². Versatile Connections: Easily connects to Allegro 2D and 3D bio containers for WFI, diafiltration buffer, and process fluid in fed batch operations. Temperature Control: Includes a heat exchange plate under the retentate bio container to manage product temperature, either cooling or heating as needed. Applications: Ideal for concentration and diafiltration of proteins, recombinant molecules, potent biological drugs, cytotoxic drugs, and vaccines, the Pall Allegro system stands out as a reliable and efficient choice for modern bioprocessing needs.

Year of construction: 2025, condition: used, Merck Millipore Lynx ST Connector 1/2 in Fractional Triclover Code STC21THN01 Gedpoxv Afrjfx Afkobn Unused and in Original Packaging This is for 1 Unit although 50+ in stock Expiry Date: 31st August 2026 Sterilized fluid transfer systems containing tubing, connectors, clamps, valves, and disconnectors provide a critical link between disposable fluid paths and the various steps in your aseptic process, whether that is plastic-to-stainless or plastic-to-plastic. We offer three types of connectors and a crimping tool for sterile disconnection. We also can configure standard single-use assemblies with common types of commercially available tubing, such as platinum-cured silicone and C-Flex® 374 thermoplastic elastomer. Reliable and easy to use, Lynx® connectors feature unique designs that enable fluid transfer and maintain sterility. Lynx® connectors are available separately or as part of a complete assembly

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, A complete cooling water unit that was used for cooling screw compressors. Pump unit with machine frame, consisting of: - 3 x Grundfos CRNE45-2-2 A-F-G-V-HQQV centrifugal pumps (Year of manufacture: 2012) Q = 45 m³/h, H = 30.6 m, P2 = 5.5 kW - 6 x manual stainless steel shut-off butterfly valves DN 80 - 3 x basket strainers DN 80 - 3 x check valves DN 80 - 1 x pressure relief valve - 2 x Rosemount GP6 S22 C1 pressure transmitters - 6 x stainless steel gauges Cl. 1 - 1 x GRP pipe - 1 x mounting frame Dimensions: Length: 2400 mm Width: 2000 mm Height: 1400 mm Weight: 780 kg Heat exchanger unit with frame, consisting of: - 2 x bolted plate heat exchangers, Funke Apparatebau GmbH (Year of manufacture: 2001) Type: FPS 21-100-1-E Volume: 29.2 / 29.8 liters Max. operating pressure: 10 bar Max. temperature: 80°C - 8 x manual intermediate flange shut-off butterfly valves, stainless steel - 1 x KSB BOA electric valve with Auma SAR actuator and MATIC head, including Harting connector - 2 x PT 100 sensors Gbodpfx Afjywuihokjn - 6 x analog thermometers, stainless steel Cl. 1 - 2 x PE pipework with bends 110x65mm Gerodur - 1 x expansion vessel - 1 x mounting frame Dimensions: Length: 2200 mm Width: 2000 mm Height: 2000 mm Weight: 1500 kg

Condition: used, 2 clamping plates, 1 pair of clamping rails with T-slots Gedpfx Afsxf Uwljksbn Clamping block, press table, auxiliary table with T-slots Length per clamping rail: 900 mm Width per clamping rail: 295 mm Thickness per clamping rail: 130 mm - 6x T-slots, 30 mm - T-slot spacing: 150 mm - 6 holes Ø 18 mm (spacing 300 x 160 mm) - All sides machined surfaces Net weight per clamping rail: 240 kg Net weight of both clamping rails: 480 kg Good condition

Condition: excellent (used), Year of construction: 2013, CFT S.p.A. sorting and crushing line consisting of: - CFT S.p.A. receiving hopper with drum screen type: VASCA di LAVAGGIO con ELEVATORE model: L945 1/13 serial number: 24621 year of manufacture: 2013 plastic mesh belt with partitions belt width: 540 mm partition height: 30 mm distance between partitions: 200 mm lifting height: 1950 mm sieve: 1 mm overall dimensions: 3400 mm x 2950 mm x 1950 mm. - Conveyor belt, loading/inspection belt CFT S.p.A. inspection belt with work platform type NASTRO di CERNITA model L945-313 serial number 24622 year of manufacture 2013 plastic belt belt width 600 mm overall dimensions 4200 mm x 2800 mm x 1680 mm. - S/s tank with volume sensor Gbodpfx Afsvq I Hujkon - Lifting/loading/feeding belt with partitions CFT S.p.A. plastic belt with partitions belt width: 600 mm partition height: 120 mm distance between partitions: 700 mm lifting height: 3100 mm overall dimensions: 5000 mm x 1900 mm x 3900 mm. - CFT S.p.A. crusher with progressive discharge pump Type: TRITAGHIACCIO Model: CR 2 Serial number: 24602 Year of construction: 2013 Internal dimensions of hopper: 950 mm x 1000 mm x 900 mm Overall dimensions: 5800 mm x 2100 mm x 3500 mm - Hopper/bunker/tank with volume sensor Dimensions: 1750 mm x 1600 mm x 1250 mm