Used Holzkraft Typ Hws 702 K for sale (37,942)

Condition: excellent (used), Year of construction: 1992, For sale is a used Panhans thickness planer, model 426, with a planing capacity up to 230 mm. The machine is in good condition and has been serviced and inspected by our qualified staff. Psdpfx Ahewza Tyslspt Technical specifications: - 4-knife Tersa cutterblock - Planing width: 630 mm - Maximum height capacity: 230 mm - 2 feed speeds - Extractor connection Ø 160 mm - Motor power: 7.5 kW - Year of manufacture: 1992 The planer is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Related terms: planer, thickness planer, thicknessing machine, Dickte, Felder Reference: R-S24F9

Condition: new, functionality: fully functional, machine/vehicle number: 10000475, empty load weight: 180 kg, maximum load weight: 570 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,250 mm, loading space height: 440 mm, Year of construction: 2026, Low loader trailer 125x250cm, 750kg, "Type U4" Type U4 car trailer with a loading dimension of 125 x 250 x 45cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg including a 10-year warranty. Koch-Anhängerwerke has been manufacturing quality trailers made in Germany for over 30 years. Special features Double-walled anodized aluminium dropside 30mm (unique) Dropside with load securing system in V2A stainless steel (unique) Very sturdy tailgate locks made of V2A stainless steel (unique) Dropside bolting completely 8 mm V2A stainless steel (unique) Ppodpfxsi R Hw As Ahljt Three-sided lashing gallery / railing (unique) 2x M16 threaded anchors / sturdy threaded rods at the rear (unique) Further equipment Support wheel Easily removable tailgate Floor plate stable screen-printed floor, non-slip birch wood glued waterproof Axle and drawbar completely hot-dip galvanized Manufacturer ALKO Large 185 /70 R13 tires, balanced and capable of 100 km/h Sheet steel mudguards bolted with 8 mm stainless steel screws 12 volt electrics, 13-pin plug with reversing light Other documents Vehicle registration certificate / registration certificate part 2 Various accessories available at extra cost! You would like to buy this trailer or have further trailer queries then please use our internal box trailer "Nr.10000475".

Condition: new, functionality: fully functional, machine/vehicle number: 10401475, empty load weight: 180 kg, maximum load weight: 570 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,500 mm, loading space width: 1,250 mm, loading space height: 440 mm, Year of construction: 2026, Product information "Koch lid trailer 125x250cm height:65cm 750kg|Type U4" Lid trailer 125x250cm, 750kg, "Type U4" Car trailer with lid type U4 with a loading dimension of 125 x 250 x 65cm. Lightweight aluminum trailer with a permissible total weight of 750kg and a payload of 570kg including a 10-year warranty. Koch-Anhängerwerke has been manufacturing quality trailers made in Germany for over 30 years. Special features Double-walled anodized aluminium dropside 30mm (unique) Dropside with load securing system in V2A stainless steel (unique) Very sturdy tailgate locks made of V2A stainless steel (unique) Dropside bolting completely 8 mm V2A stainless steel (unique) Four-sided lashing gallery / railing on lid (unique) 2x M16 threaded anchors / sturdy threaded rods at the rear (unique) Further equipment Easily removable tailgate Floor plate stable screen-printed floor, non-slip birch wood glued waterproof Axle and drawbar completely hot-dip galvanized Manufacturer ALKO Large 185/70 R13 tires, balanced and capable of 100 km/h Sheet steel mudguards bolted with 8 mm stainless steel screws 12 volt electrics, 13-pin plug with reversing light All-aluminum cover with 8 mm V2a screw connection Sturdy V2a lid lock at the rear with discus lock 2 sturdy V2a stainless steel hinges at the front 2 gas springs for easy opening Cover easily removable Other documents Vehicle registration certificate / registration certificate part 2 Ppodpei R Hwxofx Ahlet If you would like to buy this trailer or have further trailer queries, please use our internal box trailer "No.10401475".

Condition: new, machine/vehicle number: 10000275, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, axle configuration: 1 axle, loading space length: 2,050 mm, loading space width: 1,050 mm, loading space height: 440 mm, Year of construction: 2026, Passenger Car Trailer Type U2 with loading dimensions of 105 x 205 x 45 cm. Lightweight aluminum trailer with a permissible total weight of 750 kg and a payload of 620 kg, including a 10-year warranty. Koch-Anhängerwerke has been manufacturing quality trailers made in Germany for over 30 years. Features: Ppedpfx Ahji R Hwfsljt - 10-year warranty (unique) - Double-walled anodized aluminum side panel, 30 mm thick (unique) - Side panel with cargo securing system in V2A stainless steel (unique) - Highly robust rear gate latches in V2A stainless steel (unique) - Complete sidewall fastening using 8 mm V2A stainless steel screws (unique) - Three-sided lashing rail / railing (unique) - 2x M16 threaded tension anchors / sturdy threaded rods at the rear (unique) Additional equipment: - Support wheel - Easily removable tailgate - 12 mm anti-slip phenolic plywood base, waterproof bonded birch wood, highly durable - Axle and drawbar fully hot-dip galvanized, manufacturer ALKO - Large 185/70 R13 tires, balanced and rated for up to 100 km/h - Steel mudguards bolted with 8 mm stainless steel screws - 12-volt electrics, 13-pin plug with reversing light Miscellaneous: - Vehicle registration certificate (part II) - Various accessories available for an additional charge! If you would like to purchase this trailer or have further inquiries about trailers, please use our internal box trailer "No. 10000275".

Condition: used, mileage: 12,000 km, power: 103 kW (140.04 HP), first registration: 01/1950, fuel type: diesel, axle configuration: 4x2, color: grey, driver cabin: other, gearing type: mechanical, Year of construction: 1950, Vehicle location: Bovenden, Body: 3-sided tipper body Vomag body type H6, 6 cylinder engine VEB Dieselmotorenwerke Schönebeck / Elbe, restored collector's vehicle, vehicle was assembled from parts of the 40s and 50s, year of construction can therefore not be determined exactly !!! ACCESSORIES WITHOUT WARRANTY, subject to changes, prior sale and errors! Ppedjvhgzropfx Ahlet - .

Condition: used, mileage: 12,000 km, power: 103 kW (140.04 HP), first registration: 01/1950, fuel type: diesel, axle configuration: 4x2, color: grey, driver cabin: day cab, gearing type: mechanical, suspension: steel, number of seats: 3, Year of construction: 1950, Equipment: cabin, Vehicle location: Bovenden, If you have any questions, please call ! Psdpsvhg Sdsfx Ahlept Color: grey Leather: red Vomag body type H6, 6 cylinder engine VEB Dieselmotorenwerke Schönebeck / Elbe Restored collector's vehicle Vehicle was assembled from parts from the 40s and 50s Year of construction can therefore not be determined exactly !!! ACCESSORIES WITHOUT WARRANTY, changes, prior sale and errors excepted! - .

Condition: used, used, good condition, hardly runmanufactured by Haffnertype KF 20stand machinechain set 40 x 150workpiece restlubricant unit1 x mechanical workpiece clampingrequired space ca. l x w x h mm600 x 800 x 2000total connected power 1,7 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Ppsdpevwgaysfx Ahljt

Condition: new, A mobile workstation with fast,individual height adjustment. About onePedal is operated the hydraulic unit,this is a stepless adaptation to thedesired working height the base frame can be differentWorktops are placed. Theseare fixed with 4 socket lift table has a steel worktop and willdelivered with 4 swivel castors, 2 of them are withParking hnical specifications:Load capacity: 300 kgWorking stroke: 610 mmConstruction height: 400 mmFrame: 970 x 590 mmTotal height: 1010 mmWeight: 135 kgRahmen: 970 x 590 mmGes. height: 1010 mmweight: 85 kg Podsvwf Rqepfx Ahljpt

Condition: new, A machine for beginners and professionals ic equipment:- Manual height and swivel adjustment 0 – 46°of the saw blade, with digital display- drive power 4 kW (5.5 hp) with a speed,4200 rpm.- Double trolley, trolley length 3200 mm- Miter stop, cutting to length up to 3450 mm- Braking device, illuminated button- saw blade diameter max. 315 mm,- Saw blade overhang max. 104 mm- Cutting height 100 mm, 70 mm at 45°- Machine height 88 cmPackage 5 including:- 5.5 kW (7.5 hp), 2 speeds- Rip fence DIGIT X, 1000 mm*- Large extraction hood (PSV)- Without scorer (prepared for the subsequent installation of ascoring unit) Ppsdevyd Duepfx Ahlot

Condition: used, cleaned, function checked, test run with face-plate motor used manufactured by Festo type KF stand machine door rest base Ppsdpfxjvwfr Uo Ahlst face-plate motor exhaust connection D 50 mm required space ca. l x w x h mm 1200 x 800 x 2000 weight ca. 200 kg total connected power 1 kW located in  97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: Typ VAP ND, Steaming chamber external dimensions (WxDxH): 7100x2200x4250 mm. The steaming chamber has been dismantled. Ppjdpfxjxrlvxj Ahlet

Year of construction: 1983, condition: good (used), 1 Bracket milling machine make: RECKERMANN, type: KOMBI 900, year 1983 ser. no. 6367P, table size 1.000 x 310 mm, travel X/Y/Z 720 x 220 x 450 mm, Pjdpfxoh E Du De Ahlspt tool holders SK 50, HD machine vice, spindle speeds: 3...2800 rpm

Condition: new, machine/vehicle number: 3703d600260244d5f159f51e4, empty load weight: 4 kg, maximum load weight: 33 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis Saddle Container Welded fine-grained steel construction, saddle plate with interchangeable 2 kingpins and 2 kingpin positions Container mounts: Incl. Rear extension retracted: 1 x 20 feet flush with the rear, attention low fifth wheel load Rear extension extended 1st stage: 1 x 30 feet, 2 x 20 feet, 1 x 40 feet with gooseneck tunnel Rear extension extended 2nd stage: 1 x 45 feet with gooseneck tunnel and overloaded to the rear without rear height adjustment and without folding center supports, no transport of containers without tunnel possible. Plug-in adapter for front locking, for locking the containers without tunnel from below, with holder when not in use Rear extension mounted on rollers, with hand crank 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation Pjdpfx Asi Ri Eqohljpt 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Extendable underride guard for 45 foot containers Half-shell mudguards Incl. with anti-spray flaps according to EG Impact protection at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored line routing for easy service. 200 spring-loaded parking brake 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, rear and brake lights in LED, amber LED lighting on the side (Note! with certain towing vehicles, misdiagnoses can occur even though the function is is given) 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Operating instructions Attention: Transport of filled tank containers is excluded! When transporting 45 containers with a short tunnel, with or without front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the total train length of 16500 mm is exceeded! The underride guard must be extended manually! A special permit in accordance with § 70 StVZo is required! Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder 390 Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Support legs coated black Attention: Archive pictures!

Condition: new, machine/vehicle number: e4d182b7a074e7b83e540ed58, empty load weight: 5 kg, maximum load weight: 32 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Further information Chassis Saddle Container Welded fine-grained steel construction, saddle plate with interchangeable 2 kingpins and 2 kingpin positions Container mountings: Rear extension retracted: 1 x 20 feet flush with the rear, low fifth wheel load Rear extension extended 1st stage: 1 x 30 feet, 2 x 20 feet, 1 x 40 feet with gooseneck tunnel Rear extension extended 2nd stage: 1 x 45 feet with short gooseneck tunnel and overloaded to the rear Rear extension extended 2nd stage + front extension 1st stage: 1 x 45 feet with long gooseneck tunnel and chamfered corners With rear height adjustment and folding center supports for containers without tunnel Container guide at the front Plug-in and removable (electrical, air and brake connections at the front of the front cross member) Plug-in adapter for front locking, for locking the containers without tunnel from below, with holder when not in use Front extension mounted on rollers, can be pulled out manually (for 45 containers with long tunnel) Rear extension mounted on rollers, with hand crank 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Extendable underride guard for 45 foot containers Half-shell mudguards with anti-spray flaps according to EG Impact protection at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake Ppodoi Rizuepfx Ahlot 2 interchangeable clutch heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift & lower valve + auto-reset function Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/55 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. Special approval required if the total train length exceeds 16,500 mm. When transporting 45 containers with a short tunnel, with or without front extension, the permissible system length from the kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm is exceeded! The underride guard must be extended manually! A special permit in accordance with § 70 StVZo is required! Approval / plates Germany Test approval according to EG 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning sign

Condition: ready for operation (used), functionality: fully functional, Submitting a bid obligates you to collect the items on time by 31 December 2025! The offer includes: Web offset printing press with cutting unit Edelmann Graphics Webprint 48 Five (Serial No.: 6160-64, Year of manufacture: 2004) Sorting unit Edelmann Graphics HS (Serial No.: B-534, Year of manufacture: 2004) Extraction system incl. piping, frame Pjdpexyh Rhofx Ahljpt Roll collator Rotatek Model RC2 (Serial No.: 007, Year of manufacture: 1994) Note: The green unit outside is not included in the system.

Condition: new, working width: 6020 x 1000: ca. 140weight approx.: 2 tomessurements (LxWxH): ca. 7000 x 1700 x 1500: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 6020 - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE Psdpfxorzx Ems Ahlspt - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: new, working width: 4010: ca. 140: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 4010 - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT Ppsdpfxor A Ntwe Ahlot The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: new, working width: 3010: ca. 140: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 3010 - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT Pjdpfxerzx Dze Ahlept The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: new, working width: 4010: ca. 140: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 4010 - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE Ppjdpfxsrzx D Ne Ahlet - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: new, working width: 5020: ca. 140: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 5020 - HIGH PROFITABILITY Podpfx Aerzx Ebohlept - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: new, working width: 3010: ca. 140: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 3010 - HIGH PROFITABILITY Ppodpfxsrzx Dwe Ahlst - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: new, working width: 5020: ca. 140: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 5020 - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE Psdpfsrzx Efsx Ahlept - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: new, working width: 6020 x 1000: ca. 140weight approx.: 2 tomessurements (LxWxH): ca. 7000 x 1700 x 1500: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 6020 - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm). Pjdpfxerzx Eie Ahlopt

Condition: used, functionality: unexamined, For sale: BITZER compressors, type: 2GHC-2K-40S Ppjdpfx Aoyutpmjhljt We have 9 units available Net price per unit: 350 Euro

Condition: used, functionality: fully functional, Key Technical Specifications From official Elumatec documentation: Routing capabilities: Horizontal cutting range: With stop: 300 × 100 mm Using template: 270 × 70 mm Travel: 80 mm Vertical cutting range: With stop: 290 × 100 mm Using template: 230 × 70 mm Travel: 120 mm elumatec +1 Spindle speed: 12,000 rpm elumatec +1 Ppjdpfx Ahew Syzqjlot Profile clamping capacity: up to 150 × 150 mm elumatec +1 Power supply: 230/400 V, 3-phase, 50 Hz Power output: 0.74 kW elumatec +1 Compressed air: 7 bar; air consumption per cycle: 12 l (no mist), 24 l (with mist) elumatec +1 Dimensions & weight: Length: 940 mm Depth: 1 150 mm Height: 1 600 mm Weight: approx. 260 kg elumatec +1 Market Listing Highlights A listing from Modern Tool BC provides real-world equipment data that aligns closely with the official specs: Electrical characteristics: 240–575 V, 60 Hz, 3-phase (typical for North American markets) Motor power: 1.0 horsepower (≈0.75 kW) Spindle speed: 12,000 RPM Routing capacities: Horizontal with stop: 300 × 100 mm Horizontal with template: 270 × 70 mm Horizontal stroke: 80 mm Vertical with stop: 290 × 100 mm Vertical with template: 230 × 70 mm Vertical stroke: 120 mm Modern Tool BC Key features: Simultaneous routing in two planes without repositioning 1:1 copy ratio via stops or templates Two-handed operation for safety Two horizontal pneumatic clamps Includes air service unit, blank & keyhole templates, 8 mm & 10 mm collets, pulse spray mist coolant system, tools, and an operation manual Verify the accuracy of the information with the seller.