Used Hilma Roemheld Nc 160 for sale (9,442)

Condition: ready for operation (used), Year of construction: 2008, This 3-axis Baublys Control Laser UL 65QR/NC 100 50 50 SOMA was manufactured in 2008. It features a Q-switched solid-state Nd:YAG laser, capable of reaching frequencies up to 50 kHz. The machine includes a round transfer table of approximately 75 cm and is housed in a 2.4 x 2.6 meters enclosure. If you are looking to get high-quality laser marking capabilities consider the Baublys Control Laser UL 65QR/NC 100 50 50 SOMA machine we have for tact us for more information. • Laser type: Q-switched solid-state laser • Laser medium: Nd:YAG • Wavelength: 1064 nm Nledpfxox Sz Efo Aaaea • Beam quality (M²): 13 (6 kHz, MM);

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: V1 01HOHS300KET5ESGR0SZ580, warranty duration: 12 months, The machine is usually always in stock. Short delivery times are possible. System Features Nedpfx Aaoq Ikgksaola 1. 2.5-meter-long chain conveyor (other lengths available upon request) 2. Adjustable bag former 3. Double film loader + automatic film centering device 4. Rotary end seal, single sealing jaw 5. Solid center fin seal structure 6. Four servo-controlled drives - Active material feed shaft - Center seal - End seal - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in local language 11. Print mark control 12. Programmable bag length 13. Standard travel direction: left to right Technical Parameters 1. Product length: L40 - 300 mm 2. Product width: W30 - 160 mm 3. Product height: H5 - 60 mm 4. Packaging speed: up to 300 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 500 mm 6. Supply voltage: 1-phase 220V 50Hz 7. Total power: approx. 7.5 kW 8. Machine weight: approx. 450 kg 9. Machine dimensions: approx. 4250 x 990 x 1650 mm

Condition: used, max. temperature 160 °C operating pressure 20 bar Nodpfx Ajy Erzkjaajla heating capacity 8 kW Cooling capacity 30 kW Capacity 1 kW rate of flow 60 l/min The temperature control unit is, in our assessment, in good used condition. The offer consists of 4 units: 1 x manufactured in 2002 1 x manufactured in 2005 2 x manufactured in 2011 Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: good (used), Year of construction: 1992, functionality: fully functional, Technical details workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg Nljdpfjy Auq Nox Aaaoa dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, DGUV certified until: 05/2027, year of last overhaul: 2026, total length: 1,200 mm, total width: 1,400 mm, input frequency: 50 Hz, empty load weight: 1,500 kg, overall weight: 1,500 kg, type of input current: three-phase, electrical fuse: 32 A, Spiral mixer Diosna Model: SP 160 AD with 2 removable bowl trolleys. Mixer for up to 160 kg of dough. Safety cover. Equipped with 2 timers and 2 speeds. Robust engineering. Connection: 400V, 32A CEE plug. Refurbished used machine with warranty and service. Options: maintenance contract, service package, delivery & floor fixing, commissioning & training, machine rental service. We offer a large selection of spiral mixers! Nedpfx Aasvvqqmeasla

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel Nlsdpeh Eyd Refx Aaaea OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW Nodoi Dtb Uopfx Aaasla By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 500 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port ( vacuum-pump optional ) Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW pellet classifier sieve control-board and Siemens Touch operation panel (updated ) OPTIONAL against additional price ᐳ * Vacuum pump ᐳ ,material feed conveying, Big-Bag filling Station ᐳ chiller – cooling unit Njdpfed Sg I Isx Aaajla More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: good (used), Drawbar head, control unit, operating lever, joystick, drive switch, single-axis joystick, spur gear drive, multi-axis controller -Manufacturer: Gessmann, Joystick Multi Axis Controller -Type: 0208873 EP/160 -Quantity: 1x Joystick available Nledpfx Aaey Auuujaja -Dimensions: 83/83/H165 mm -Weight: 0.6 kg

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included Njdpfjy Aktmsx Aaaela screen text german CEE-socket 16A CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG

Condition: used, 3-jaw wedge bar power chuck FORKARDT type HGF 160-45-3 HI GRIP No. 109452 Diameter: 165 mm Nlodpfxjy Ehypo Aaaoa Internal diameter: 46 mm Cylindrical centering ring mounting: Ø 140 mm Max speed: 5,500 rpm - Wedge bar chuck with centrally adjustable clamping jaws - 1 set of stepped jaws, reversible for use as hard or soft jaws (can be reversed by 180°) - 3 mounting holes Ø 11 mm, bolt circle 105 mm Weight: 9.3 kg Very good, as-new condition

Condition: used, Anvil with round horn and rectangular horn Northern German style anvil Face width: 130 mm Face length: 630 mm (with pointed horn) Round horn length: approx. 200 mm Pointed horn length: approx. 220 mm Overall length: 830 mm Nljdpfxoy Ehycj Aaaja Height: 340 mm Foot with front anvil: 430 x 320 mm - Cast steel, hardened - Square hole approx. 28 mm for anvil tools - Round hole Ø approx. 23 mm Dimensions L x W x H: 830 x 320 x 340 mm Very bright ring, good quality

Condition: new, capacity Ø 30 - 160 mm Saw Body 30 Grad Linear Schlitten sawing motor 15 kW hydraulic motor 3 kW Saw Feeding Servo 1,5 KW Siemens Saw speed 30-120 rpm /min saw-blade dia. Ø480 x 2,25 x 2,7 x 50 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl weight of the machine ca. 5550 kg required space 3200 x 7600 mm Please use the contact form for price information. GERD WOLFF GLS-160 High-performance circular saw Introducing the new generation of High-Performance Metal Circular Saws, seamlessly blending precision and efficiency with German quality. Our High-Performance Metal Circular Saw machines are setting the standard in metalworking thanks to their innovative technology, allowing for precise and effortless cutting of steel of any kind. From 10 millimeters to an impressive 250 millimeters in steel diameter, our machines cut with utmost accuracy within seconds. At the core of these machines are their automatic functionalities, coupled with an advanced ball screw spindle and an automatic material feeding system. This Nlodsy Apluepfx Aaasa combination ensures not only maximum precision but also impressive speed. A Siemens motor and Siemens PLC screen guarantee reliable performance and easy control. Moreover, our High-Performance Metal Circular Saw machines feature a special system for quick and convenient blade changes. The hydraulic material tension provides secure fixation of the workpiece during the cutting process. Additionally, a programmable misting system is integrated to ensure optimal lubrication and cooling of the saw blade, extending the tool's lifespan. With our servo and driver technology, you have full control over your manufacturing processes, allowing you to optimize production and achieve the highest quality standards. Choose our High-Performance Metal Circular Saw machines and embrace the future of metalworking – precise, efficient, and reliable.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Milling machine Macmon M 434 NC Manufacturer: Macmon Type: 434 NC Control: Heidenhain TNC 128 Year of manufacture: 2008 Condition: used X-axis: 400 mm Y-axis: 250 mm Z-axis: 400 mm Clamping surface 600 x 320 mm Main drive: AC motor kW 3 Speed range: Vertical infinitely variable 30 - 6300 Horizontal stepless 0 - 4200 - Feed rate 0 - 10 m/min Nlodey Egccepfx Aaaja Tool holder ISO 40 Operating voltage 400 / 50 Volt / Hz Control voltage 24V Weight 1200 kg Scope of delivery - Documentation - Machine feet - Coolant system - Spindle guard - Machine light - HR410 Handwheel - Horizontal spindle Counterholder

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Njdpfx Aaevvi I Rjaela

Condition: excellent (used), machine/vehicle number: XLRAE45FF0L362456, mileage: 259,490 km, power: 117 kW (159.08 HP), first registration: 12/2010, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,000 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 9,100 mm, total width: 2,520 mm, loading space length: 6,250 mm, loading space width: 2,550 mm, loading space height: 2,600 mm, Year of construction: 2010, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, = Additional options and accessories = - Air suspension - Remote central locking - Roof Spoiler - Spoilers - Sun visor = Remarks = XLRAE45FF0L362456 = More information = Technical information Number of cylinders: 4 Engine capacity: 4.462 cc Front axle: Steering; Suspension: leaf suspension Rear axle: Suspension: air suspension Weights Empty weight: 5.160 kg Carrying capacity: 2.330 kg GVW: 7.490 kg Condition Technical condition: very good Nljdpfx Aasymrbrsaoa Visual appearance: very good Identification Registration number: BX-VV-51 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours.Prices do not include VAT.No rights may be derived from the information provided.Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber.Mobile: Available via WhatsApp and Viber.When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information.If in doubt, please call us so we can verify the invoice and/or payment.Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,535 h, load capacity: 1,600 kg, lifting height: 5,400 mm, free lift: 1,894 mm, fuel type: electric, mast type: triplex, construction height: 2,371 mm, fork length: 1,150 mm, empty load weight: 1,439 kg, total length: 849 mm, drive type: Elektro, construction width: 790 mm, High-lift truck Load centre: 600 mm Mast type: Triplex Nlsdpfoy Dki Dox Aaaja Technical condition: good Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery voltage: 24V Battery capacity: 500Ah Battery year of manufacture: 2018 Impulse control, full free lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,850 h, load capacity: 1,600 kg, lifting height: 5,400 mm, free lift: 1,894 mm, fuel type: electric, mast type: triplex, construction height: 2,371 mm, fork length: 1,150 mm, empty load weight: 1,439 kg, total length: 849 mm, drive type: Elektro, construction width: 790 mm, High-lift stacker Load centre: 600 Mast type: Triplex Technical condition: good Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery voltage: 24V Battery capacity: 500Ah Battery year: 2018 Nodpfxey Dkiwo Aaasla Pulse control, full free lift, CE certificate,

Year of construction: 2022, condition: ready for operation (used), total width: 2,400 mm, total height: 10,000 mm, product length (max.): 2,400 mm, Extraction system manufactured in 2022. This SCHUKO Solo-160-2323/30/182/BD features an impressive airflow of approximately 15,500 m³/h, designed for handling dry plastic chips. It includes a total filter area of 182 m² and a filter hose diameter of 160 mm. If you are looking to get high-quality extraction capabilities, consider the SCHUKO Solo-160-2323/30/182/BD machine we have for sale. Contact us for further details. Nedey Dgfzopfx Aaaola • Condition: Unserviced – no warranty • Airflow: approx. 15,500 m³/h • Dust type: Plastic chips (dry) • Filter hose diameter: 160 mm • Filter hose length: 3000 mm • Total filter area: 182 m² • Rotary valve power: 0.75 kW

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Njdpeyzz R Tefx Aaasla Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: good (used), Year of construction: 1992, Ref. -No.: 10578 Manufacturer: UNION Type: BFT 130 NC Year of construction: 1992 Type of control: CNC Control: Heidenhain 430 Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1600 mm Z-Travel: 1600 mm W-Axis: 600 mm Spindle Diameter: 130 mm W-Travel (Boring Spindle): 900 mm Table Load: 8000 kg Clamping Area: 1800 x 2000 mm T - groove width: 28 mm T - slot spacing: 160 mm Tool Taper: ISO 50 Spindle Turning Speed - Stepless: 1000 RPM Spindle Speed: 10 - 2000 RPM Max. Torque On The Boring Spindle: 3150 Nm Rapid Traverse X-Axis: 2500 m / min Rapid Traverse Z-Axis: 2500 m / min Drive Capacity - Spindle Motor: 15 - 30 kW Borehole Diameter: 800 mm W-axis feed: 2500 mm / min Nljdpfxsy Ed H Sj Aaaja Y-axis feed: 2500 mm / min Table size: 2000 x 1600 mm Rapid adjustments W-axis: 3150 mm/min. Rapid adjustment Y-axis: 5000 mm / min Cross slide movement: 320 mm Torque max. face support: 5300 Nm Tarpaulin diameter max.: 1400 mm Machine length: 6000 mm Machine width: 4000 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 40 t Further information: The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 1994, Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Handover: in its current condition as inspected -Speed control: Cover damaged, handwheel missing (see photos) -Manufacturer: Flender Himmel, adjustable geared motor Nsdpfxoyz Sbpe Aaasla -Type: LK 02-M1C4 -Speed: 160-1600 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 14 x 30 mm -Dimensions: 430/210/H140 mm -Weight: 16.3 kg

Condition: good (used), Year of construction: 1994, Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Flender Himmel, adjustable geared motor Njdpfx Aoyz R Uhsaajla -Type: LK 02-M1C4 -Speed: 160-1600 rpm -Power: 0.37 kW -Protection rating: IP54 -Shaft: Ø 14 x 30 mm -Dimensions: 430/210/H140 mm -Weight: 16.3 kg

Condition: reconditioned (used), functionality: fully functional, warranty duration: 6 months, input voltage: 400 V, DGUV certified until: 05/2027, year of last overhaul: 2026, input frequency: 50 Hz, empty load weight: 700 kg, overall weight: 700 kg, type of input current: three-phase, power: 12 kW (16.32 HP), electrical fuse: 32 A, Spiral Mixer Diosna Nledpfxevvqqtj Aaaea TOP model: SP 160 D Dough mixer with 2 speeds, 2 timers Stainless steel bowl + stainless steel spiral Flour dust cover Connection: 400V, 32A-CEE plug Refurbished used machine with warranty & service Options: Maintenance contract Spare parts box Service package Delivery service Instruction & commissioning Rental machine service Leasing & rental service Many TOP spiral mixers in stock!

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 4,120 h, load capacity: 1,600 kg, lifting height: 9,500 mm, free lift: 3,100 mm, mast type: triplex, construction height: 3,721 mm, fork length: 1,150 mm, empty load weight: 4,800 kg, total length: 2,000 mm, construction width: 1,270 mm, Reach Truck Load centre: 600 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: normal Front tyre type: Solid (cushion tyres) Front tyre condition: 60 - 80% Rear tyre type: Solid (cushion tyres) Nodpjy A Uaqjfx Aaajla Rear tyre condition: 60 - 80% Battery voltage: 48V Battery capacity: 775Ah Battery year: 2018 Description: Fork camera! Sideshift, 3rd valve, pulse control, full free lift, CE certificate,