Used Heating Cooling Device (Art.3157) for sale (29,419)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 10001626, Equipment: documentation/manual, 2x Atlas Copco Heat Pump Compressor With Spares (Unused 2021) Atlas Copco heat pump compressor 1 with coupling Atlas Copco heat pump compressor 2 with coupling Oil system Run down tank With spares as seen in asset list Bedpey Tccbefx Am Rewn Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement form (EUS) by the buyer, and, if the buyer is not the end user, for each end user.

Condition: excellent (used), Large size blastroom for surface preperation and finishing large workpieces 4 shotblasting units Filtration system NEON Lightning 250 W Automatic front door Service door in BMS System Smooth control by means RACK system 2 Abrasive operator system 2 Opperator platform with basket 2 Magic Blast Controllers Bwedpfoygk S Nex Am Rsn 4 ACF Shotblasters SV206 with 205Liter Schneider MAGELIS opperator display control panel Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2002, condition: good (used), Make: HAEUSLER Type: Crocodile Year: 2002 Specifications Metric US Standard Min. shell inner diameter 1500 Max. shell inner diameter 6000 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 20 mm Maximium wall thickness 70 mm Max. section weight 30 T Max. weight total workpiece 120 T Dimensions (Estimate) Length 60000 mm Width 6000 mm Height Bsdpfx Ajkwcnzsm Rjwn 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2007, condition: good (used), Make: HAEUSLER Type: Clamp Year: 2007 Specifications Metric US Standard Min. shell inner diameter 1800 Max. shell inner diameter 5500 Min. shell outside diameter 1500 Max. shell outside diameter 2500 Minimum wall thickness 10 mm Maximium wall thickness 40 mm Max. section weight 15 T Max. weight total workpiece 60 T Dimensions (Estimate) Length 24000 mm Width 6000 mm Bjdpfx Ajkwcn Eem Rjwn Height 3200 mm Weight 0 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, centre height 250 mm weight of the machine ca. 120 kg Reversible clamp with angle scale and three-jaw chuck Dimensions: Chuck diameter 255 mm 60 mm bore Center height 250 mm Base area 350 mm x 400 mm Item Features: Bjdpfx Ajy Sux Sem Rswn Our offers are used items, i.e. can Soiling, storage marks, damage, such as scratches and color defects may also be present. Errors in technical data and description reserved

Condition: used, length 1020 mm width 580 mm depth 520 mm weight of the machine ca. 590 kg Bwodpfxoy Sur Ss Am Ren

Condition: used, This listing is for the Grant T100 12L Heating Circulating Bath The unit is in full working condition and is ready for immediate use Grant T100 12L Heating Circulating Bath – Stainless Steel Tank The Grant T100 12L Heating Circulating Bath is a robust, precise temperature control system combining the T100 Optima circulator with a 12-litre stainless steel tank. Ideal for laboratories requiring high stability and reliability for routine heating applications, it’s designed for use across many scientific disciplines. Key Features Temperature Range: +5 °C to 99 °C (cooling via immersion coil available) Bedpfjxhfyijx Am Rjwn Capacities: 12 L Stainless Steel Tank: Durable, easy to clean, resistant to corrosion Temperature Stability: ±0.05 °C Temperature Uniformity: ±0.1 °C Heating Power: ~1.3 kW Controller: Grant T100 Optima circulator

Condition: used, This listing is for the Thermo Scientific Precision CIR19 Heated Circulating Bath The unit is in full working condition and is ready for immediate use The Precision CIR‑19 is a robust and reliable lab tool tailored for high-precision temperature-sensitive workflows. Its strengths include excellent uniformity, precise digital control, safe operation features, and ease of maintenance. Whether you're incubating samples or performing delicate assays, it’s built to deliver consistent, reproducible results Overview & Applications The Precision CIR‑19 is a high-performance 19 L (5 gal) circulating water bath engineered for applications demanding strict temperature uniformity and control—think enzyme reactions, serological assays, or any sensitive method where thermal consistency matters. Key Features Perimeter-directed water flow for superior temperature uniformity. Coil-free internal design, making cleaning and maintenance a breeze. Microprocessor-based digital control, displayed via a monochrome LCD. Bedpfx Asxhfpwem Rjwn Auto-on/auto-off timers and audible alarms, enhancing scheduling and safety. Low-fluid (dry-run) protection, guarding against overheating or damage. Hinged lid with extended height, ideal for accommodating taller labware. Supplied with a stainless steel gable cover, diffuser tray, and the quirky but useful rubber duck.

Condition: like new (used), The Supfina 200 superfinishing device is an attachment for processing cylindrical shafts using stone finishing techniques. It is suitable for machining pre-ground or finely turned surfaces. The device performs an oscillating motion; workpiece infeed is realized via a pneumatic cylinder or via the lathe’s support. Its easy mounting on a lathe makes the Supfina 200 superfinishing device particularly suited for repair operations, single-part production, and small batch manufacturing. The device is very robust, making it well-suited for continuous and multi-shift operation. The oscillation stroke, infinitely adjustable between 0 and 5 mm, remains almost constant even under load. This allows grooving operations between shoulders to be carried out cleanly and without overlapping stroke, even with narrow reliefs (less than 1 mm). For economical machining, diameters from 1 to 300 mm are recommended for short workpieces. Bwodpfxozaipto Am Ron

Condition: good (used), Year of construction: 1998, Tool setting device, tool presetting device, milling cutter setting device -Z-axis: 630 mm -unit of analysis Bodspam Avepfx Am Rewn -360 degree protractor -Dimensions: 570/1720/H1875 mm -Weight: 387 kg

Condition: used, Year of construction: 2023, Milk E-Heating System PHE Electric Heated water Vat with connected Plate heat exchanger to Heat up products such as milk, juice and similar products. This can be used for various applications were the product needs to be pre heated ie. Separation, Homogeniser, Cheese process, Heating Vat, etc. This comes with a fully modernised control panel and frequency inverter for the product pump. Make: DMUK Capacity: 1000-1000 L/h Temperatures: Regulated by the controls Circulation Pump: Included Control Panel: Included Bwsdpfoy E H Eqsx Am Ren VDF: Included Condition: Excellent

Condition: refurbished (used), The MALLDISON milk pasteuriser with a capacity of 1000 liters per hour is typically designed for efficient processing of milk, ensuring safety and preservation of quality through pasteurization. Here are some key features and aspects you might find relevant: Bwedpsxzxwhefx Am Rsn - Functionality: The machine heats milk to a specific temperature for a set period, killing harmful bacteria while preserving essential nutrients. - Capacity: With a processing capability of 1000 liters per hour, it's suitable for medium to large dairy operations, allowing for high volumes of milk to be pasteurized quickly. - Design: Many pasteurisers feature a stainless steel construction for hygiene and easy cleaning. They often have insulated heating chambers to maintain temperature efficiently. - Control System: Modern machines often come with digital controls for precise temperature and timing adjustments, improving the reliability of the pasteurization process. - Safety Features: Look for built-in safety systems that can prevent overheating or pressure build-ups, ensuring safe operation. - Efficiency: The design often focuses on energy efficiency to reduce operational costs associated with heating. Divert Valve: Included Construction: Fully stainless steel skid amd stainless steel parts for the product Chart Recorder: Digital with Latest upgrade and test report in 2025 Balance Tank: Included Product Pump: Included Hot Water Pump: Included Heating: Self Heating with Built in Electric Elements Temperatures: Temperatures : 4-45-55-65-78(72) and out at 4 c Connection for Separator in line connection to Homogeniser Capacity: 500-1,200 L/h Available: Immediately

Year of construction: 2024, condition: like new (used), 4x lifting devices for floor rollers for in-plant transport, Bloksma – never used –: Price per unit ex-works: €1,950 (net) Manufacturer: Bloksma Accessory: lifting device Year of manufacture: 11/2024 Bwedpsyzczgefx Am Rjn Model: G4-HET-FVBEP-200 Part number: 210926A19554 Serial number: H-26277 Dimensions: L435 x W280 / GOK 935 Electric lifting device G4 Model HET-F Design: semi-mobile Loading direction: front loading Load capacity: 200 kg Lifting speed: 31 mm/sec Load handling equipment for BLOKSMA floor rollers BOF + BOZ For floor roller sizes: 600 x 400 mm + 630 x 430 mm Insertion direction: transverse Control: electric, 230 V / 50 Hz 250 kW, 16 A Motor with spindle drive Control element: detachable control panel Height detection: sensor-based height detection for single-piece closed containers GOK approx. 935 mm Color: Base frame RAL 9010, cover RAL 4006 Former new price: approx. €4,000 / unit (net)

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories Bjdsgrkigopfx Am Rewn It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, table length: 600 mm, table width: 600 mm, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall Bwedpfjk S Dt Tjx Am Rsn - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, pressing force: 300 t, table length: 1,800 mm, table width: 1,100 mm, Vulcanizing Press – Manufacturer: Durendus – 300 t Heating Press – Table 1,800 × 1,100 mm For sale is a high-performance hydraulic vulcanizing press from the manufacturer Durendus with a press force of 300 t. The machine features large-format heating plates measuring 1,800 × 1,100 mm, a clear column spacing of 2,100 mm, and a stroke of 600 mm, making it particularly suitable for large-surface vulcanizing, laminating, and thermal pressing processes in industrial applications. ==== Technical Data & Information: Vulcanizing Press Durendus – 300 t Heating Press ==== General Details - Manufacturer: Durendus - Model: Vulcanizing Press Bsdpfx Amex Ap Ito Rewn - Design: Heating Press / Vulcanizing Press - Press force: 300 t - Machine weight: approx. 22,000 kg - Dimensions (W × D × H): approx. 3,800 × 1,870 × 3,600 mm ==== Working Area - Clear width between columns: 2,100 mm - Max. distance between heating plates: 800 mm - Stroke: 600 mm - Table height over floor (incl. heating plates): 800 mm ==== Table and Ram - Heating plate size: 1,800 × 1,100 mm - Table (lower), with T-slots: 2,100 × 1,100 mm - Ram with T-slots: 1,900 × 1,100 mm ==== Speeds - Approach speed: 150 mm/s - Working speed: 15 mm/s - Return speed: 150 mm/s ==== Hydraulics (Version 1) - Hydraulic unit: Bosch Rexroth - Hydraulic pump: 105 l/min - Motor power: 22 kW ==== Hydraulics (Version 2) - Hydraulic unit: Duplomatic / Daikin Hybrid-Servo - Hydraulic pump: 130 l/min - Motor power: 15 kW ==== Control and Operation - Two-hand operation - Ram return via control button - Travel limit via Leuze measuring system and monitor ==== Features - CE certificate - User manual included ===== Vulcanization, rubber processing, plastics processing, lamination processes, large-format molding presses, thermal pressing procedures, heavy-duty applications Vulcanizing press, heating press, hydraulic press, large-format press, laminating press, molding press, thermal press, heavy-duty press, try-out press, tool tryout press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with Brazilian national safety standard NR 12, which is based on these directives. Our core strengths are special machine construction and press automation. We supply custom hydraulic presses at surprisingly competitive prices. We use components from leading European manufacturers for the hydraulic systems in our presses.

Condition: like new (used), Year of construction: 2023, total height: 2,500 mm, table height: 900 mm, pressing speed: 8 mm/s, pressing force: 50 t, overall weight: 2,900 kg, operating pressure: 250 bar, ram plate width: 498 mm, table length: 522 mm, table width: 522 mm, type of input current: AC, power: 10 kW (13.60 HP), input voltage: 400 V, distance table to ram: 600 mm, oil tank capacity: 130 l, operating speed: 8 mm/s, Equipment: safety light barrier, Vulcanizing Press – Manufacturer Hidrobrasil – 50 t Double Column Heated Press For sale is a hydraulic vulcanizing press from the manufacturer Hidrobrasil with a pressing force of 50 t, featuring a robust double-column design. The machine is equipped with electrically heated platens (approx. 522 × 522 mm), a maximum daylight opening of 600 mm, as well as precisely adjustable pressing and heating parameters. It is particularly suitable for industrial vulcanizing, laminating, and thermal pressing processes in continuous operation. ===== Technical Data + Information: Vulcanizing Press Hidrobrasil – 50 t Heated Press ==== General Specifications - Manufacturer: Hidrobrasil - Model: Vulcanizing Press - Design: Double Column Heated Press - Pressing Force: 50 t (500 kN) - Machine Weight: approx. 2.9 t - Overall Height: approx. 2,500 mm - Minimum Hall Height: 3,500 mm ==== Working Area - Max. Opening: 600 mm - Stroke / Min. Opening: 300 / 300 mm - Table Height above Floor (with heating platens): 900 mm ==== Table and Ram - Table Size / Platens: approx. 522 × 522 mm - Ram Size / Platens: approx. 498 × 498 mm - Number of Heating Levels: 1 ==== Forces - Free Stripping Force: 20 kN Bjdstwv S Nopfx Am Rewn - Pressure Range: 8 – 50 t ==== Speeds - Idle Speed: up to 10 mm/s - Opening Speed: up to 40 mm/s - Pressing Speed: max. 8 mm/s ==== Hydraulics - Operating Pressure: max. 250 bar - Pressure Build-Up Time: max. 3 sec. - Pressure Accuracy: ± 5 bar - Main Pump: Bosch Rexroth Gear Pump approx. 26 l/min - Oil Volume: approx. 130 l (HLP 46) - Automatic Pressure Adjustment - Pressure Hold Time up to 3,600 sec. - Circulating Oil Cooling - Oil Temperature Monitoring ==== Heating System - 2 electrically heated platens - Temperature Range up to 200 °C - Thermally Neutral: 80 – 120 °C - Integrated Temperature Sensor - Insulated Platens ==== Control and Operation - Two-Hand Operation (adjustable or fixed) - Travel Limitation by Pressure or Position - Pressure Adjustment via Rotary Control - Signal Tower (Red / Yellow / Green) - Operation via Control Cabinet ==== Electrical - Main Supply: 400 V AC - Control Voltage: 24 V DC - Frequency: 50 Hz - Hydraulic Motor Rating: 7.5 kW - Total Connected Load: approx. 10 kW (without heating platens) ==== Miscellaneous - Sound Pressure Level: max. 78 dB(A) - Parallelism Deviation: ± 0.1 mm - Deflection: < 0.2 mm/m ===== Vulcanization, rubber processing, plastics processing, laminating processes, compression molding, thermal pressing methods, hot pressing, continuous operation Vulcanizing press, heated press, hydraulic press, rubber press, laminating press, forming press, thermo press, double column press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer.

Condition: good (used), Internal article no.: 24089 Hot melt adhesive system Consisting of: 2x hot melt adhesive tank units Bwodpfxofkgycs Am Ren (Dynamelt 505 / BJ:04) 15 pcs. Material hoses Various hot melt adhesive application heads (Dynatec BF) Operating instructions Technical data, see pictures

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, 1 used rapid steam generator ----- Manufacturer: LOOS, Gunzenhausen Type: DF 600 Capacity: 600 kg/h Thermal output: 400 kW Max. operating overpressure: 13 bar Water content approx.: 43 l Year of manufacture: 1996 Bwsdow I T Ivopfx Am Ron Year of heating coil manufacture: 10 / 2023 Equipped with Weishaupt gas burner, gas control section, control cabinet mounted on the boiler body, feed water pump, and the existing coarse and fine fittings.

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger with attachments -Type: Top 4000 2-stage 153000452036 -Power: 20.3/23.3 kW -Operating pressure: max 10 bar Bwodpfxou Scqbo Am Ren -Number: 2x air heaters available, 1x with additional bracket -Price: per piece -Dimensions: 700/680/H1020 mm / 700/680/H900 mm -Weight: 45 kg / 40 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, inner dimension width: 1,300 mm, total length: 6,000 mm, total width: 1,900 mm, Used for cooling after painting/coating processes where the paint/coating has been heated during drying. Bsdpfxozbau Nj Am Rewn

Condition: good (used), Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Container rotating device: Welding rotating device -Drive motor: 0.75 kW with variable speed gearbox -Load capacity: kg -Roller spacing: 315 - 965 mm, rollers Ø 230 x 160 mm overall width -Rolling speed: 0.05 to 0.95 m/min Right/Left rotation Bwsdpoy R N Dysfx Am Ron -Control unit: with foot pedal -Individual components: see photos -Transport dimensions: 1140/730/H750 mm / 890/440/H750 mm / 700/600/H955 mm -Total weight: 714 kg

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, roller stand rotating device -Roller stand: Container rotator without drive, 2 pieces -Roller spacing: 315 to 965 mm -Rollers: 2 pieces on each side, Ø 250 x 140 mm -Load capacity: kg -Dimensions: 890/440/H800 mm Bsdpfx Amey R Nrqe Rewn -Submission/Price: complete -Transport dimensions: 890/880/H800 mm -Weight: 506 kg

Condition: used, Precise angles and mitres from 0° to 46°, with digital display for angle indication Location: Nattheim Bwedowhzg Ujpfx Am Rsn

Condition: excellent (used), functionality: fully functional, El. heated salt bath continuous furnace system, make Kohnle consisting of Magnetic feeder Hardening furnace Bwjdpfx Amey Uuwmj Ren Type: BLH 950-650/100-5000 Temperature: max. 950°C Throughput: 200 kg/h Conveyer belt width: 620 mm Effective height: 90 mm Connected load: 160 kW Heated length: 5.000 mm Temperature control zones: 5 Throughput speed: 170 - 20 mm/min. Time in the heating zone: 30 - 240 minutes Gases used: nitrogen, methanol, natural gas, ammonia, propane Salt bath Salt: AS200 Washing system