Used Haas Haas St-28L for sale (14,890)

Condition: good (used), Sputter target, tube, pipe -Pipe dimensions: Outer: Ø 152 mm Inner: Ø 125 mm Total length: 3249 mm -Number: 2 pipes available -Price: Complete -incl. transport crate -Box dimensions: 3600/570/H585 mm -Weight: 306 kg Fpsdpfx Aijb Ilw Uovon

Condition: good (used), InterBus-S, bus coupler, bus terminal, bus terminal -Manufacturer: Phoenix Contact, Interbus-S Bus Terminal -Type: IBS ST 24 BKM-T . 27 50 154 -Price: per piece Fpedpfjb N E E Ijx Aivon -Number: 17 modules available -Dimensions: 115/45/H115 mm -Weight: 0.2 kg/pc.

Condition: good (used), geared motor, electric motor -Speed: 140 rpm -Power: 0.37 kW -Design: B5 angle -Shaft: Ø 20 mm -Brake: 24 V Protection rating: IP65 Fpedpfx Aiob A H Igsvjn -Quantity: 6 available Price: per piece -Dimensions: 460/180/H250 mm -Weight: 15 kg

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Engine power: 1.5 kW Fpodpfob A Nlkjx Aivjn -Speed: 1430 rpm -Grinding discs: max. Ø 300 mm -Operating voltage: 380 volts -Dimensions: 700/550/H1200 mm -Weight: 170 kg

Condition: good (used), Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 25,300 mm Number of bays / rack row: 09 pcs. 2,700 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 81 pcs. Total pallet spaces: 81 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg The scope of delivery includes: 10x pallet rack uprights, used Material color: blue Upright type: A103 Upright profile: 100 x 79 x 3.00 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( bolted framework ) 2,300 mm high 1,100 mm deep 36x pallet rack beams, new Material color: RAL 2001 orange Box profile: 110 x 50 mm Beam type: 2C-S 1115 Clear width: 2,700 mm Agraffe: G.E. - 3 Max. load per pair of beams 3,000 kg, with evenly distributed load Fpodpetq Sm Hsfx Aivsn 72x integrated locking pin, new Material color: orange To secure the longitudinal beams against unintentional lifting out 40x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x shims, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven ground 01x load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Currently available from stock: 23 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 100 kW (135.96 HP), number of axes: 2, overall weight: 252 kg, table length: 1,600 mm, table width: 1,000 mm, Equipment: documentation/manual, This CNC laser machine has a working area of 1600x1000 mm and is intended for use by a big factory. It has a through table, allowing you to cut materials and rolls of fabric of any length. The Wattsan CNC laser machine is built to have a 24/7 work capacity in series production. This model operates on wood, plywood, cardboard, paper, plexiglass, acrylic, plastic, rubber, leather, stone, etc. This model has a feature: you can remove the front wall and use the opened space to cut sheets and rolls of materials. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 1610 ST characteristics: Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 1505 x 2200 x 670 mm + if it is on wheels 315 mm Packing size: 2300 x 1600 x 810 mm Fpjdpfjry Ub Rox Aivjn Weight: 442 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: ready for operation (used), Heidenhain ST 3077 incremental measuring probe, ID 511 398-01, measuring probe without tip, 140mm, cable length 1.5m, serial number 37890553T. Used, in good condition, 100% functional. Scope of delivery as shown in the photos. Fpjdpszt H E Rofx Aivsn

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,054 h, load capacity: 4,000 kg, lifting height: 3,700 mm, fuel type: diesel, mast type: telescopic, construction height: 2,900 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 7,025 kg, total length: 3,658 mm, drive type: Diesel, construction width: 2,060 mm, Rough terrain forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Telescopic Transmission: Torque converter Condition: Ready for use and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 18x19.5 Rear tire type: Pneumatic Rear tire size: 10x17.5 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also purchase your used equipment, even if you do not purchase a vehicle from us. Lease purchase and financing options are available on request at favorable terms. We will be happy to provide you with competent and detailed advice on our vehicles. Fsdpjzrir Dofx Aivepn Side shifter, 3rd valve, rear work light, front work light, heater, dust filter, full cabin, interior mirror, exterior mirror, windshield wiper, single-pedal control, seat.

Condition: excellent (used), Year of construction: 2021, operating hours: 1,118 h, functionality: fully functional, HSM baling press, type HL 7009 ST/A, year of manufacture 2021 Technical data: Manufacturer: HSM Type: HL 7009 ST/A Year of manufacture: 2021 Operating hours: 1118 Fpedezvluvopfx Aiven Pressing force: 70 t Specific pressing force: 58 N/cm² Drive power: 11 kW Feed opening: 1020 x 900 mm Bale size: 1100 x 1100 mm (W x H x D) Bale weight: up to 600 kg Tying: 4-way horizontal, manual Machine dimensions: 5992 x 2066 x 2394 mm (L x W x H) Weight: 7500 kg Materials: Paper, cardboard, film Note: The press is in good condition and has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without any warranty.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, 6 mooring posts 1 manual mooring post Fpodpfx Aiozrvhxevsn 1 swivel mooring post Clamp Three-blade propeller Standard equipment

Condition: good (used), Year of construction: 2018, functionality: fully functional, Equipment: CE marking, scorer, Horizontal panel dividing saw / Horizontal panel saw with lifting table feed Manufacturer: SCM / Gabbiani Type: Gabbiani ST 115 Year of manufacture: 2018 Horizontal beam saw with lifting table feed from the rear, originating from a parquet factory. Cutting length approx. 3200 mm Cutting depth on the lifting table approx. 1850 mm Max. stack height on the lifting table (with supports) approx. 600 mm Saw blade projection 115 mm Variable saw carriage speed 0 - 135 m/min. Variable sliding table speed 0 - 70 m/min. Motor of the main saw blade approx. 9 kW Main saw blade speed 3900 rpm Saw blade diameter 400 mm Motor of the scoring saw approx. 1.8 kW Scoring saw speed 6300 rpm Scoring saw blade diameter 160 mm 6 clamping devices (3 of which with front aligner) Fpodpezyx Evjfx Aivon 2 air cushion tables, each with blower Voltage: 400 V, 3 phases, 50 Hz, 43 A Weight approx. 5500 kg Data partially estimated and taken from the brochure.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 14,812 h, functionality: fully functional, machine/vehicle number: FJ.DKA0-000212, product width (max.): 480 mm, product height (max.): 12 mm, product length (max.): 320 mm, TECHNICAL DETAILS Performance (cycles/hour) Speed: max. 14,000/h Wrapping speed: max. 14,000/h Pre-folding: max. 12,000/h Piston opening: max. 12,000/h Offset stitching: max. 12,000/h Dimensions – Width × Spine Length Uncut: max. 320 × 480 mm Uncut: min. 85 × 128 mm Single-up Cut: max. 315 × 475 mm Minimum cut size: 80 × 120 mm Double-up Uncut: min. 85 × 210 mm Trim mark Cut: min. 2 × 64 × 100 mm Product height (compressed) 3-knife cut: max. 12 mm Middle cut as trimming cut: 10 mm Middle cut as punching cut (half punching width): max. 6 mm Triple cut as trimming cut: 5 mm MACHINE DETAILS Operating hours (according to counter): 14,812 h EQUIPMENT 1 CHU feeder 2 DVU vertical feeders Fpedpfozw Ak Rex Aivon 2 DHU horizontal feeders 1 Stitchmaster three-knife cutting machine with middle cut 2 knife sets 4 stitching heads CHA forklift Note: Further technical details can be found in the attached document.

Condition: excellent (used), mileage: 140,833 km, power: 100 kW (135.96 HP), first registration: 07/2021, fuel type: diesel, tire size: 20/65R16, axle configuration: 4x2, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 70 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 9, emission class: euro6, total length: 5,140 mm, total width: 1,930 mm, total height: 2,200 mm, permissible axle load (axle 1): 1,490 kg, permissible axle load (axle 2): 1,490 kg, loading space length: 2,250 mm, loading space width: 1,560 mm, loading space height: 1,220 mm, Year of construction: 2021, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), hill-start assist, navigation system, onboard computer, power assisted steering, power mirror, sliding door, soot filter, traction control, Technical information Number of cylinders: 4 Engine capacity: 1.950 cc Transmission Transmission: 9G-Tronic, 9 gears, Automatic Axle configuration Brakes: disc brakes Front axle: Tyre size: 20/65R16; Max. axle load: 1490 kg; Steering; Tyre profile left: 100%; Tyre profile right: 100% Rear axle: Tyre size: 205/65R16; Max. axle load: 1490 kg; Tyre profile left: 100%; Tyre profile right: 100% Weights Empty weight: 2.008 kg Carrying capacity: 717 kg GVW: 2.800 kg Functional Cooling: -15 °C to 20 °C Make of bodywork: Zanotti Z250S-D Cooling engine: diesel and electric Wall thickness: 8 mm Maintenance APK (MOT): New APK (MOT) upon delivery Condition Technical condition: very good Visual appearance: very good Damages: none Identification Registration number: V-53-PBD Other information Cool unit make: Zanotti Additional information Please contact Moussa or Youssef for more information = Additional options and accessories = - ATP Certificate - DAB Radio - Electric folding mirrors - Heated door mirrors Fsdpfx Aeykkn Seivspn - MBUX Audio - Multifunctional Steering Wheel - Parkingsensors back - Particulate filter - Radio/Cd/Audio system - Rain Sensor - Reversing camera - Side Door Right - Spare wheel - Standby 230V = Remarks = 305 VIDEO: Mercedes Vito 114 CDI L2 136 hp Euro 6D-Temp Zanotti refrigerated van / cools, freezes and heats ( +20C / -15C ) Stand-by 230V / Day and night cooling ATP certificate valid until 06-2027 140,000 km verifiable 9-speed automatic Technically and visually in very good condition Cool unit brand: Zanotti

Year of construction: 2022, condition: used, machine/vehicle number: 06005220087, For sale is a fully functional Yilmaz ST 264 milling machine for drainage applications. Fsdpfx Aiezdrvpsvjpn The machine has been serviced. It is in excellent condition.

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: Fpjdpfxsyyzxhj Aivon - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: used, mileage: 289,000 km, power: 330 kW (448.67 HP), first registration: 01/2021, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,700 mm, fuel: diesel, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 10,450 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,400 kg, loading space length: 8,100 mm, loading space width: 2,490 mm, loading space height: 2,480 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, spoiler, tail-lift, traction control, Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Axle configuration Front axle: Max. axle load: 8000 kg; Tyre profile left: 70%; Tyre profile right: 70% Rear axle 1: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 2: Lift axle; Max. axle load: 7400 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80% Weights Empty weight: 11.620 kg Carrying capacity: 15.380 kg GVW: 27.000 kg Functional Tail lift: Dhollandia, 3000 kg Maintenance APK (MOT): tested until 02/2027 Identification Registration number: BD-234-L Other information Cargo space outer length: 810 cm Cargo space outer width: 249 cm Fsdpfx Aiszvfpaevepn Cargo space outer height: 248 cm = Additional options and accessories = - Air horn - Aluminium fuel tank - Camera system - Heavy duty engine brake - Line assist - Lock diff - Outside temperature display - Radio/CD player - Rear air suspension - Reversing camera - Roof spoiler - Visor = Remarks = 2x Binding rails Tail lift3.000 kg Tail lift 260 cm lang PTO Preperation

Condition: excellent (used), 409 USED KEMPER dough mixer + 2 removable stainless steel bowls. Fjdpfx Aozdp I Aoivspn TECHNICAL DATA: - bowl capacity: 75 kg of flour / 120 kg of dough EXTERNAL DIMENSIONS (in cm): - W: 82, - L: 150, - H: 132, - Bowl: 76 x 44. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: ready for operation (used), functionality: fully functional, BEHR ST 150 / Vertical slotting machine with swiveling head - Stroke up to max. 175 mm - Head tilting in both directions, 5-8 degrees each - Table height / lower edge of ram guide: 260 mm - Rotary table diameter: 340 mm - Table longitudinal travel: 320 mm - 3 stroke speeds: 17-54-108 strokes per minute - Maximum slot width up to 26 mm - Feed in X/Y axes, speed adjustable - Rotary table adjustment manual - Three-jaw chuck Dimensions (LxWxH): 1.5x1.2x2 meters / Weight: 1600 kg Fodjy R S Rvopfx Aivopn Errors and omissions excepted.

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm Fpsdpfx Aekn Rz Hsivjn

Condition: new, Year of construction: 2026, machine/vehicle number: ST-80, functionality: fully functional, pressing force: 80 t, stroke length: 450 mm, operating speed: 4 mm/s, reverse speed: 5 mm/s, table width: 1,000 mm, table length: 1,750 mm, table height: 800 mm, total length: 2,000 mm, total width: 1,750 mm, total height: 1,750 mm, overall weight: 1,700 kg, Equipment: CE marking, documentation/manual, Model: ST-80 STANDARD DESCRIPTION: We have designed the ST series of motorized hydraulic presses with a movable gantry and adjustable ram, offering a range of three different capacities from 80 to 150 tons. Specifically designed for straightening welded structures, as well as plates cut by oxy-fuel or laser. The design facilitates easy loading and unloading of large volumes: parts, plates, or structures. It provides access to various pressure points without having to reposition the workpiece, thanks to the lateral movement of the cylinder and the longitudinal travel of the gantry. STRUCTURE AND TABLES: The ST series hydraulic presses feature an electro-welded frame manufactured exclusively from S355JR steel. The frame is stress-relieved and precision-machined after welding to ensure perfect parallelism and accuracy. All structural calculations and design are performed using finite element software. As a result, we always guarantee our high standards of precision and quality. The gantry provides longitudinal movement. CYLINDER AND HYDRAULIC UNIT: Double-acting cylinder with honed barrel, chrome-plated piston, and maintenance-free anti-wear guides. Cylinder operation via a lever hydraulic valve. Equipped with a removable pressure pad to protect the piston. Motorized hydraulic unit with two speeds and automatic switch-off of the fast approach speed at working pressure, including a pressure relief valve. ELECTRICAL SYSTEM AND SAFETY: Electrical circuit includes a motor protection switch with emergency stop. Supplied with a glycerin-filled pressure gauge (reading in tons) and hydraulic oil. Complies with all essential health and safety requirements according to CE standards. Delivered with an operating manual. MODEL ST-80 Capacity (t) 80 Motor Power (kW) 3 Fodoz E Hb Hspfx Aivepn Working Speed (mm/s) 3.8 Approach Speed (mm/s) -- Return Speed (mm/s) 4.7 Max. Pressure (bar) 315 Piston Stroke – J (mm) 450 Lower Table (mm) 1,000 x 1,750 Ram Travel – C (mm) 730 Gantry Travel – D (mm) 1,100 Front Opening – A (mm) 1,050 Vertical Opening – B (mm) 500 Working Height – E (mm) 800 Overall Width – G (mm) 2,000 Overall Depth – H (mm) 1,750 Overall Height – I (mm) 2,250 Weight (kg) 1,700

Condition: used, Bench drill, gear drill ALZMETALL Type AB 40 ST Production drill Manufacturer No. 750 Year of manufacture 1994 Drilling capacity 40 mm Spindle mount MK 4 - short quill Overhang 325 mm Quill stroke 200 mm Table size 740 x 460 mm Height adjustment of drill head 700 mm Distance spindle-table max. 1015 mm Spindle speed 56 - 2500 rpm 12 gear stages Automatic feed 0.15 - 0.2 - 0.3 - 0.36 mm/rev Motor power 4 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 12 gear stages - Drilling and threading device with right and left rotation - Electric foot switch for switching the direction of rotation to left for thread cutting interruption - Rapid traverse via hydraulic quill movement - Semi-automatic operating sequence: rapid traverse - working feed - rapid return - Drill head height adjustment via hand crank - Table height adjustment via hand crank (table height from 740 to 1170 mm) - Coolant system - Control cabinet on the back of the machine - Mounted on a steel plate (1300 x 750 x 15 mm) with machine feet - Quick-change drill chuck METABO 3 to 16 mm - Operating manual and electrical diagram Overall height with drill head at the top 2750 mm Space requirement L x W x H 1400 x 850 x 2300 mm Weight 1250 kg Fpedpfxjza Hzge Aiven Good condition

Condition: excellent (used), functionality: fully functional, table width: 1,200 mm, table length: 2,500 mm, total length: 3,000 mm, total width: 2,100 mm, total height: 2,600 mm, overall weight: 700 kg, GLUE PRESS, rotary type, 3 sections | STROMAB ST 2500 | JBS MACHINERY | for wood! Rotary glue press for bonding tabletops – POWERFUL! Bonding length: 250 cm Fpodpfx Aijzxyfbovjn Rotary glue press STROMAB ST 2500 TECHNICAL SPECIFICATIONS: - Working length: 25000 mm - Working width: 1200 mm - Pneumatic clamping system - 3 gluing sections - 6 pneumatic clamps per section - 3 side clamps per section Machine dimensions: - Length: 300 cm - Width: 210 cm - Height: 260 cm - Weight: 700 kg WE ORGANIZE TRANSPORT WHERE CAN YOU SEE OUR MACHINES? JBS MACHINERY FOR WOODWORKING WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Spindle nose : A2-6 - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - Max. bar diameter : 61 [mm] - Max. turning diameter : 400 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle nose : A2-6 - Spindle power : 11 [kW] - Spindle speeds : 6000 [rpm] - C axis indexing precision : 0.001 [°] - Travel : 795 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 410/805 [mm] - Y stroke : 140 [mm] - B Axis stroke : 225 [°] Fpodpfx Aieuhal Ssvsn - B axis indexing precision : 0.001 [°] - Tool type : CAT 40 - Spindle speeds : 12000 [rpm] - Spindle power : 6.6 [kW] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 20 LOWER TURRET - Number of positions : 9 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 3075 X 2330 [mm] - Machine height : 2450 [mm] - Machine weight : 7500 [kg] MACHINE HOURS - Number of hours under power : 75434 [h] - Number of working hours : 49153 [h] EQUIPMENT - CNC : Mazatrol MATRIX - Interactive programming - 3 colors status lamp - Coolant tank * Coolant through spindle - Chips conveyor - Oil mist extractor : ELBARON - Tool probe - Tool breakage detection - Parts catcher - Parts conveying strip - Bar loader : LNS QUICK LOAD - Electric transformer

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: SAA81E9S0112721, Technical characteristics: System Components - XR1 Evaluation Unit: PC-based system with MarWin software - SD26 Drive Unit: Skidless tracing system with motorized height adjustment - ST-G Measuring Stand: Granite base (500 × 300 mm) with manual column adjustment Measurement Capabilities - Tracing length: 1.75 mm, 5.6 mm, 17.5 mm (DIN/ISO); 1–16 mm (ISO 12085) - Tracing speed: 0.2 mm/s or 1 mm/s - Positioning speed (X-axis): 5 mm/s - Height adjustment (Z-axis): 7.5 mm motorized - Positioning speed (Z-axis): 2 mm/s - Measuring range: ±250 µm (±500 µm with extended probe arm) - Probe force: ~0.7 mN Probe System: BFW 250 (skidless, magnetic mount for fast change) Software & Evaluation - Supported parameters: R, P, W, Motif, D profiles - Standards: ISO, JIS, MOTIF (ISO 12085) - Features: - Over 80 surface parameters - Automatic cutoff and measuring path selection - Quick & easy measuring programs - PDF report generation - ASCII export and USB data transfer - Multi-user levels and calibration reminders Fodpfx Aijxx R Rnsvjpn Hardware & Interface - PC: All-in-one or industrial PC (optional) - Connectivity: USB and Bluetooth (for drive unit) - Display: Touchscreen interface with intuitive icons Accessories: - CT 120 cross table - Calibration set - Magnetic probe arm holder - Optional contour evaluation module Machine status: WORKING

Condition: good (used), Year of construction: 1989, machine/vehicle number: 8906756, functionality: fully functional, actuation type: pneumatic, overall weight: 84 kg, GRASS BBM /ST with adapter for BLUM fittings Row drilling unit – hinge plate drilling – drilling for base plates – drilling for press-in dowels – adapter for pressing in the hinge plates and base plates. Fedpfezvn N Nsx Aivjpn