Used Grass Mower for sale (221)

Condition: ready for operation (used), operating hours: 4,028 h, functionality: fully functional, machine/vehicle number: WB843-2, mileage: 32,362 km, power: 55 kW (74.78 HP), first registration: 11/2020, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,550 kg, empty load weight: 1,990 kg, next inspection (TÜV): 11/2026, fuel: diesel, driver cabin: other, gearing type: hydrostat, emission class: euro5, loading space volume: 1.3 m³, number of seats: 1, number of previous owners: 1, Equipment: additional headlights, all wheel drive, hydraulics, low noise, soot filter, Hako Citymaster 1650 sweepers, first owner Engine inspection including oil, oil filter, and fuel filter will be carried out free of charge upon sale Machine version with a new pedal system 1,960 sweeping operating hours 4,028 total operating hours 10,568 sweeping kilometers 32,362 total kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive Camera system for the suction shaft and rear Includes leaf suction hose (rare) Sweeping material container made of stainless steel Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Selectable working speeds 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder Hatz industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cabin with air-sprung driver's seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg Other applications possible through additional attachments from HAKO, such as sweeping brushes, snowplows and lawn mowers (not included) Errors, changes and prior sale reserved. Dodozmzk Uspfx Aixjck We only sell under our general terms and conditions and with the exclusion of all warranties. Errors, changes and prior sale reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m., Saturday by appointment. Outside these hours, telephone appointments are possible. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority; this applies to our entire vehicle inventory. The above information is non-binding; errors/changes and prior sale reserved!

Condition: used, Second-hand machine Fittings drilling machine Pot-hole band drilling machine, fitting drill (Grass drilling pattern) 6 drilling spindles in a row (32 mm pitch) (one spindle on the 8-spindle drill head is defective) 4 additional drilling spindles positioned upstream for counterbore drilling Dodpezlbrcjfx Aixsck Pneumatic hold-down devices, depth stop adjustment Connection: 16 A / 380 V Motor: 1.5 kW Weight approx. 100 kg Dimensions: 3,130 x 1,060 x 710 mm Availability: at short notice Storage location: Flörsheim

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 1950, turning diameter over cross slide: 225 mm, turning length: 425 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 165 mm, travel distance Z-axis: 400 mm, spindle motor power: 7,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,729 mm, total length: 3,255 mm, total width: 2,612 mm, quill diameter: 80 mm, quill stroke: 100 mm, type of input current: three-phase, For sale is a SAEILO ACE 12+ CNC turning center, manufactured in 2017 and first commissioned in July 2018. It includes a BOSS 552 bar feeder with 32 tool positions, manufactured in 2018. The machine is based on the ACE Designers Jobber LM Elite and is equipped with a FANUC Series 0i-TF control. The machine number is 1950. The machine is currently connected and can be inspected while powered on. It is in used condition with typical signs of wear from industrial use. Dcjdpfx Ajzl D Rusixjk The scope of delivery includes an IEMCA Boss 552-HD heavy-duty bar feeder, type 32 LL, manufactured in 2018, serial number 021835GA03. The bar feeder weighs approximately 830 kg, operates on 400 V / 50 Hz, and requires 6 bar of compressed air. Technical data of the machine: max. machining diameter 320 mm, swing over bed 500 mm, swing over slide 225 mm, distance between centers 425 mm, X-axis travel 165 mm, Z-axis travel 400 mm, spindle speed up to 5,000 rpm, 8 tool stations, tool cross-section 25 x 25 mm, rapid traverse X/Z 30 m/min, and a machine weight of approximately 4,000 kg. Electrical data: 380/400 V AC, 3-phase, 50 Hz, 24 V DC control voltage, 40 A fuse, 23/22 A rated current, and 15 kVA connection power. Important note: The measuring arm is currently not functioning. Other functions can be tested during an on-site inspection while the machine is powered on. The machine is located in Bocholt. Inspection and pickup are possible by arrangement. Transport and loading are the responsibility of the buyer.

Condition: used, Mower, lawn mower, cutter bar, disc mower -Handed over in current condition as seen and unchecked from storage -Sold: 9 pieces of lawn mower -Price: complete for all 9 lawn mowers -Manufacturer: EDE 1648P, SABO 43-130H, Wolf 6.36E, MEP TV 460SP, Fleurelle E451, Gutbrod Superior, Kynast V48H, Ering -Petrol and electric lawn mowers Djdpfx Aocumgleixock -Weight: 232kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, center mower lifting cylinder -Hydraulic cylinder: stroke 105 mm -Piston rod: Ø 23 mm -Recordings: Ø20 x 22 mm -Cylinder: outer Ø 58 mm -Dimensions: 475/70/H75 mm Dcjdpfxogv Dins Aixok -Weight: 5.7 kg

Condition: good (used), Tires with rims, tires for lawn tractors, ride-on mowers Dcjdpfxecgtyhe Aixjk -Tire size: 23x9.00-15 AS -Dimensions: Ø 720 mm -Weight: 22 kg

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, center mower lifting cylinder -Hydraulic cylinder: stroke 200 mm Dcedpfx Asgv Dikeixsk -Piston rod: Ø 23 mm / thread Ø22 x 50 mm -Mounting: Ø20 x 32 mm -Cylinder: outside Ø 62 mm -Dimensions: 770/70/H62 mm -Weight: 7.2 kg

Condition: good (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 8086010539B, spindle motor power: 5,500 W, spindle speed (max.): 6,500 rpm, spindle bore: 46 mm, type of input current: three-phase, bar passage: 42 mm, bar diameter (max.): 42 mm, overall weight: 4,700 kg, DMG Gildemeister Sprint 42 linear CNC turning center with FANUC 160i control and IEMCA Boss 545-E bar feeder. The machine is a compact and productive CNC twin-spindle turning center for the series production of bar stock parts up to 42 mm in diameter. Thanks to its main spindle, counter-spindle, 6 linear axes, 2 channels, and powered tools, the machine is particularly suitable for precise turning, drilling, milling, and complete machining operations in medium to high volumes. The machine is available including the bar feeder and chip conveyor. On-site inspection is possible by arrangement. Machine data: Manufacturer: DMG / Gildemeister Italiana Model: Sprint 42 linear Machine No.: 8086010539B Year of manufacture: 2008 Control: FANUC 160i User interface: DMG SlimLine / TFT 15" Spindles / C-axes: 2 Number of axes: 6 Number of channels: 2 Max. bar diameter: 42 mm Main spindle max. speed: 6,500 rpm Counter spindle max. speed: 6,500 rpm Installed power: 40 kVA Operating voltage: 400 V / 50 Hz Base machine weight: approx. 4,700 kg Travel distances: X1: 65 mm Y1: 350 mm Z1: 120 mm X2: 265 mm Y2: 326 mm Z2: 320 mm Spindle data: Main spindle: Max. bar diameter: 42 mm Guide bushing bore: 46 mm Max. speed: 6,500 rpm Nominal power: 5.5 kW Nominal torque: 37.5 Nm Counter spindle: Guide bushing bore: 38 mm Max. speed: 6,500 rpm Nominal power: 3.7 kW Nominal torque: 19.6 Nm Bar feeder: Manufacturer: IEMCA Model: Boss 545-E Type: 32 LL Year of manufacture: 2007 Serial No.: 020722GA10 Weight: approx. 860 kg Voltage: 400 V / 50 Hz Compressed air: 6 bar Dcjdpszkh Iuofx Aixok Weight: 860 kg Location: Bocholt Availability: immediately available Inspection: possible by arrangement Loading / Transport: for collection

Condition: good (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 2601-0324, The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center with 6 linear axes and 2 C-axes. Direct drives enable high acceleration and precise machining operations. It is suitable for demanding series production of parts with a bar diameter of up to 42 mm. Year: 2007 Spindles: Main and counter-spindle, each up to 6,500 rpm; bar passage through main spindle 42 mm, counter-spindle 38 mm. Tool capacity: 26 stations, including up to 11 driven tools; turret with Y-axis for milling and threading operations. Dcodpfx Aozkgqzoixjk Axes / Travels: Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm Rapid traverse rates: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min Control system: FANUC 160i-TB with 15" DMG SlimLine panel Including IEMCA Boss 545-E bar feeder The IEMCA Boss 545-E bar feeder (Type 32 LL, year of manufacture 2007) is included in the scope of supply and enables the continuous feeding of material up to Ø 42 mm. It operates with 400 V / 50 Hz and requires 6 bar of air pressure; its own weight is approximately 860 kg. Main spindle newly bearing: The main spindle has already been overhauled (new bearing). Inspection & Collection: An on-site inspection is possible. If you are interested or have questions about technical details, please do not hesitate to contact us.

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually Dcjdpfx Aieyxhq Usxsk - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: new, functionality: fully functional, New Green-Tec MT2 mulcher, ready for work. - Dimensions: • Length: 3.4 meters (11’ 1’’) Dcodszn H Tqspfx Aixsk • Width: 2 meters (6’ 6.75’’) • Height: 2.4 meters (7’ 10.5’’) - Base weight: 6740 kg - Engine: Cummins B4.5 T4F/STG V, 115kW (155 hp) - Transmission: Hydrostatic drive - Fuel tank: 160 liters (42 gallons)

Condition: used, mileage: 194,905 km, power: 210 kW (285.52 HP), first registration: 05/2007, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: orange, Year of construction: 2007, Equipment list: * Vario Pilot * Front mounting plate size 3 * Main battery switch * 12V trailer socket * Large Ringfeder trailer coupling * Hydrostatic drive * Automatic shift * Hydraulic system circuit 2 * Front quick couplers 8+separate return * Rear quick couplers 4+separate return * High-performance hydraulics circuit 3+4 * Front PTO * Additional headlamps * Rear work lights * 2 beacon lights * 2 flashing beacons * Mower door (window defective) Other information: * Trade-in and purchase of vehicles and machinery possible. * Sale price exclusive of transport * No liability for printing and typographical errors. Dodpfox R Uwxox Aixjck * Subject to error, change and prior sale. * Offer non-binding. * Photos may differ. Price applies to current condition. * All information without guarantee. Further information Operating hours: 12,592 General condition: good Serial number: WDB4052011V213048

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar Dcodpfx Aijx R Uw Sexek * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, Year of construction: 2024, _____Technical data: Working width: 3.51 metersCutter bar: OPTIDISC ELITENumber of mower discs with tempered steel disc protection skids: 8Cutter blade attachment with FAST-FITE knife quick-release fastenerAdjustable cutting height with the standard 35-65 mm skidsDisc shaft overload protection: PROTECTADRIVEarth adjustment: center suspension of the mower unitAdjustment of relief: hydropneumatic relief LIFT-CONTROL collision protection: NONSTOP collision protectionLift for swath crossing: Via the integrated implement lifting cylinderAverage swath width: 2.80 metersSwathing disc: ExternalAttachment: Three-point linkage Cat. 2Adjustable attachment, adjustable: 2 positions - offset by 190 mmConversion to transport position: Hydraulic 90° swivel to the rear (horizontal) with automatic lockingPTO shaft speed: 1.000PTO shaft with overload protection: Slipping clutch on the intermediate PTO shaftFreewheel: Standard, integrated in the side gearboxPTO power requirement: 36 kw / 49 hpRequired hydraulic connections on the tractor: 1 EW*+ 1 DW control unit (*only for setting the ground contact pressure)Lighting system with warning signs- at the rear of the machineWeight: 950 kg,Storage location:null Dcsdpfxoth Ny No Aixek

Condition: used, Year of construction: 2021, We are offering a used Mulag combination mowing unit MKM 700, manufactured in 2021, consisting of: flail mower head MK 1200 Plus, verge mower MRK 300, and verge mower head RMK 1200. Without rear weight. Further details are available upon request. Location: 95326 Kulmbach. Dsdozkdvbspfx Aixjck

Condition: used, mileage: 153,000 km, power: 70 kW (95.17 HP), first registration: 12/1992, overall weight: 3,200 kg, fuel type: diesel, color: red, next inspection (TÜV): 12/2025, gearing type: mechanical, Year of construction: 1992, total length: 5,345 mm, total width: 1,975 mm, total height: 2,680 mm, number of seats: 9, Equipment: had accident, parking heater, Original German vehicle. Dsdpfxjyx N Hqe Aixsck In service with a small municipality until 2026, initially used by the fire brigade and then by the municipal works department. This vehicle has civilian truck registration as a "box body truck" and is officially rated for 9 seats in the registration papers. The vehicle was originally operated as a multi-purpose vehicle (MZF), and afterwards was used to transport the municipality’s lawn mower. Only 1 bench seat is permanently mounted. 2 of the 3 bench seats were not used in recent years and are included loose. The original seat belts and mounting bolts are also supplied. A fold-out table with a radio handset is still installed on the left side, and a genuine large fire brigade first aid kit is integrated into the fit-out. OM 602 engine, 5-cylinder naturally aspirated diesel with 2874 cc. The engine always starts perfectly and runs cleanly at first, but after about 20 seconds at idle the running characteristics at idle worsen significantly and smoke develops. Once warmed up, the smoke subsides and the engine runs cleanly again, almost normally. The engine is either heavily worn or there is engine damage. No precise diagnosis so far. The vehicle drives immediately and functions well; typical engine power was fully and consistently available during a brief test drive, but we do not guarantee roadworthiness. A repair is certainly necessary in the near term! For driving short distances or boarding a RORO ship at port under its own power towards Africa, this 310 D appears completely unproblematic. 5-speed manual transmission. 127 km/h top speed. Tow hitch (ball head) with a braked trailer load of 2,000 kg or 750 kg unbraked. Power steering. Factory-installed auxiliary heater Mercedes/Eberspächer (working). Bodywork has isolated rust spots; overall, due to years of storage indoors, the vehicle is still in comparatively good condition. The passenger door window is broken and covered with a film. The paint below has previously been touched up in black. The vehicle clearly received very good maintenance while with the fire brigade—unfortunately, this was not maintained afterwards. Opening the sliding door mechanically deploys a large step. Unladen weight: 2,370 kg. Gross vehicle weight rating: 3,200 kg. External overall vehicle dimensions: Length 5,345 mm / Width 1,975 mm / Height 2,680 mm. The tires (205R14C) are from 2013 and not cracked, tread depth approx. 50-60%. The vehicle is primarily intended for export or for genuine fans of the Bremen transporter who are looking for a completely unvarnished basis for restoration. MOT expired 12/2025, will not be renewed. We do not have our own workshop. We have deliberately priced the vehicle attractively, as genuinely good comparable vehicles are now usually being traded for double or even higher prices. A personal inspection is highly recommended due to the defects and can be arranged by appointment. This offer is only valid for businesses, freelancers, and public authorities of any kind. Sale to private end users is strictly excluded. Subject to prior sale and errors. The purchase price is gross = net, with no VAT incurred (according to §25a of the German VAT Act / margin scheme).

Condition: new, Year of construction: 2020, Storage location: 100294900 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Hydraulic ditch mower Mounting: HS08 Cutting width: 1500mm With slope cutting blade Year of manufacture: 2020 Capacity: 270 liters Class: 6 to 8 tons Weight: 330 kg Dcedpfx Aijzk Aafsxsk Location: Cottbus

Condition: used, Used Vehicle * Vehicle No.: - * Mulag Boom Mower MHU 800 Year 2000 * Equipped with mulching head * Driven by hydraulic system Dcodoup Nw Iepfx Aixsk * Operated via 2 joystick consoles * Includes 4 support stands * Sale is on behalf of the customer ---- -> Please note that viewing is only possible by prior appointment. Thank you for your understanding. -> Sale is only to businesses or export. The above data, photos, and equipment list serve solely for the general identification of the vehicle and do not constitute a guaranteed specification in the legal sense of a purchase. All information/specifications are provided WITHOUT WARRANTY. Subject to change, prior sale and errors excepted! The equipment list does not form part of the contract and must be checked in detail on site at the vehicle by each prospective buyer before purchase. Subsequent claims will not be accepted.

Condition: used, power: 28 kW (38.07 HP), Year of construction: 2017, operating hours: 2,200 h, Equipment: air conditioning, all wheel drive, cabin, front linkage, Kubota STW40 28KW/38HP with air conditioning and mowing equipment---- * Air conditioning * Switchable all-wheel drive * Switchable rear axle differential lock * Hydrostatic transmission * Rear lift * Rear hydraulics * Rear PTO 540 or 800 1/min * Front lift with three-point linkage * Front PTO 1000 1/min * Mid-mounted PTO * Front hydraulics * Control/joystick for front loader * Rotating beacon * Front work lights * Rear work lights * Radio with speakers * Driver's seat with air suspension * Cruise control * Hand throttle * Front fenders made of plastic * Heated rear window * Front windshield wiper with washer system * Mid-mounted mower with side discharge * MATEV collection container with suction and high-dumping function ----Ready-to-use vehicle from first owner, tires in very good condition! For an additional charge, we have the following accessories available to match the tractor: * Front mower * Straight snow blade * Vario Matev SRM VP 160L snow blade * Müthing MUC 120 front-mounted mulcher Djdpfx Aoy U Sfzjixock * Rauch SA360 rear-mounted spreader Errors and omissions excepted!

Condition: used, operating hours: 7,098 h, functionality: fully functional, power: 38 kW (51.67 HP), first registration: 07/2018, fuel type: diesel, color: white, fuel: diesel, driver cabin: day cab, gearing type: automatic, Equipment: air conditioning, all wheel drive, car registration, cruise control, hydraulics, New version, 38 km/h, 2-speed gearbox City Ranger 3500, 38 kW 4-cylinder Perkins 404D-22 38 kW (51 hp) at 3,000 rpm (97/68/EC Stage IIIA) Permanent hydrostatic 4x4 drive 65-liter diesel tank Permissible total weight 3,500 kg, therefore fully suitable for use on sidewalks! Plastic parts painted – white RAL 9003 Comfort cab with passenger seat Air conditioning with heating and ventilation system Air-sprung Grammer comfort driver's seat 2 x work spotlights in the front Speed control via accelerator pedal 3-circuit hydraulic system Front hydraulics with quick-release plate Mechanical implement relief Quick-Shift quick-change system for attachments for summer and winter services Preparation for hydraulics and electrical system for optional equipment High-pressure valves (360 bar) – only on BB201D Hydrostatic deceleration with brake light function (pressure switch) 4 x tie-down points Quick-change suction nozzle With the following accessories: König health seat with integrated 3-point safety belt Heated rearview mirrors Dcodpfxozd Anij Aixok Integrated reversing camera incl. 7" color screen - Infrared night vision, viewing angle approx. 135° Suction nozzle camera (only in conjunction with the reversing camera) Container with cleaning flaps & water level indicator Deflector plate Rear underrun protection Sweeper unit with 2 towed front brushes, 900 mm Sweeping width: 1,190 mm – 2,400 mm Hydraulic coarse dirt flap Stepless brush speed control 0-150 rpm Dust reduction through spray nozzles for each disc brush Automatic start-up protection (For sweeping and collecting) With hydraulic adjustment of the right brush Sweeper material container with suction fan Color: container in stainless steel look, panel in white RAL 9003 High-dumping height 1600 mm 250-liter fresh water tank 300 liters recycled water Suitable for sweeper and grass collection Multi-purpose separation sieve for efficient dirt and grass separation 4 spray nozzles in the suction system to reduce (fine) dust emissions Quick-change (For sweeping and collecting) Dirt container deflector plate Jump starter cable / auxiliary start device Wide tires 275/60R15 107T instead of standard tires High-pressure cleaner with lance PRICE SURCHARGE: Handheld suction hose 4m € 1,300 plus VAT Subject to changes, printing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Condition: used, operating hours: 3,029 h, power: 38 kW (51.67 HP), first registration: 03/2016, color: white, fuel: diesel, emission class: euro5, Equipment: air conditioning, all wheel drive, car registration, cruise control, hydraulics, NILFISK CITY RANGER 3500 utility vehicle New version, 38 km/h, 2-speed transmission for improved driving performance City Ranger 3500, 38 kW 4-cylinder Perkins 404D 22 38 kW (51 hp) at 3,000 rpm. (97/68/EC Stage IIIA) Permanent hydrostatic 4x4 drive 65 liter diesel tank Permissible total weight 3,500 kg, therefore fully suitable for sidewalks! Plastic parts painted – white RAL 9003 Comfort cab with passenger seat Air conditioning with heating and ventilation system 2 x work lights at the front Speed control via accelerator pedal 3-circuit hydraulic system Djdpfx Aezd Alzsixjck Front hydraulics with quick-change plate Mechanical lifting mechanism relief Quick-Shift quick-change system for attachments for summer and winter service Preparation for hydraulics and electrical system for optional equipment options High-pressure valves (360 bar) – only with BB201D Hydrostatic deceleration with brake light function (pressure switch) 4 x tie-down points Quick-change suction nozzle With the following accessories: König health seat with integrated 3-point safety belt Heated rearview mirrors Integrated rear view camera including 7” color screen -Infrared night vision, viewing angle approx. 135° Suction nozzle camera (only in conjunction with rear view camera) Container with cleaning flaps & water level indicator Deflector plate Rear underrun protection Sweeper unit with 2 towed front brushes, 900 mm Sweeping width: 1,190 mm – 2,400 mm Hydraulic coarse dirt flap Stepless brush speed adjustment 0-150 rpm Dust reduction by spray nozzles per disc brush Automatic start-up protection (For sweeping and picking up) With hydraulic tilting adjustment of the right brush Sweeper container with suction blower Color: container in stainless steel look High-dumping height 1,600 mm 250 liter fresh water tank 300 liter recycling water Suitable for sweeper and grass collection Multi-purpose separation sieve for efficient dirt and grass separation 4 spray nozzles in the suction system to reduce (fine) dust emissions Quick change (For sweeping and picking up) Dirt container deflector plate Jump start pole / external starting device Wide tires 275/60R15 107T instead of standard tires High-pressure cleaner with lance Handheld vacuum hose € 1,300,- plus VAT Subject to change, printing errors, errors and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: used, axle configuration: 1 axle, first registration: 10/2016, color: red, power: 15 kW (20.39 HP), gearing type: other, driver cabin: other, * German trailer * 1st owner * Condition – see photos * TRILO VANMAC SU60 leaf vacuum * The SU60 suction units are specifically designed for the rapid collection of leaves, debris, grass, wood chips, etc. * The TRILO® SU60 suction unit is mounted on a roadworthy chassis suitable for high-speed transport (up to 80 km/h) and can easily be coupled to your vehicle, allowing you to transport and start using it anywhere. * The SU60 comes standard with a 5-meter-long hand hose equipped with a robust end tube and handle. * The SU60 is powered by a reliable Honda 2-cylinder, 20 HP petrol engine with electric start. * The 600 mm diameter radial fan is enclosed in a wear-resistant double-walled housing and driven by a V-belt. * 5-meter-long hand hose * Adjustable, 360-degree rotatable discharge spout * Ø 600 mm turbine fan * Replaceable wear plates * Statically and dynamically balanced Dcsdpfsxu Nn Dsx Aixek * Easy cleaning via dirt water drain cap * Unladen weight: 440 kg If you require a new technical inspection (TÜV), we will gladly obtain an offer from our partner workshops. Our offer is generally WITHOUT new TÜV, without new DGUV, without new SP, and without new UVV inspections. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the item to avoid misunderstandings about its condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly desired. All information provided without guarantee. We do not accept liability for errors or incorrect information in this offer. The buyer is obliged to verify the condition and features of the item/vehicle independently. Subject to alterations, prior sale, and errors.

Condition: used, Year of construction: 2007, power: 1 kW (1.36 HP), gearing type: other, first registration: 09/2007, overall weight: 550 kg, mileage: 1 km, empty load weight: 500 kg, maximum load weight: 50 kg, axle configuration: 4x4, number of seats: 1, driver cabin: other, brakes: other, emission class: none, Equipment: all wheel drive, * Dücker verge mower RSM13/2 * Mowing width 1.30 meters * Mowing head inclination from center position 30° * Cutting system: Flail shaft * Transport width: 2.40 meters * Working speed up to 8 km/h * Max. forward delivery: 3.20 meters * Max. outreach from the center of the vehicle 3.60 meters * Year of construction: 2007 Dcedpfx Aisxawy Eexjk If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: used, mileage: 1 km, power: 100 kW (135.96 HP), first registration: 08/2013, empty load weight: 6,000 kg, maximum load weight: 5,000 kg, overall weight: 2,300 kg, axle configuration: 4x4, brakes: other, color: red, driver cabin: other, gearing type: other, emission class: none, number of seats: 2, Year of construction: 2013, Equipment: all wheel drive, * German equipment * Condition, see photos * Only 6,426 operating hours Dedsw U Afkepfx Aixsck * Link to video: ?v=q3Q39J2ZX20 * Here is a video * Mower combination Dücker MK25 consisting of base unit, RSM mower & DUA800 boom * We will be happy to send you a video of the MK25 mower combination * Complete documentation * Mower combination Dücker MK25, year of manufacture 2013 * Mower combination with embankment mower and verge mower mounted on booms. Suitable for municipal carrier vehicles and tractors with municipal plate sizes 3 and 5. Operated via CAN-BUS system using two joysticks, a multicontroller, and a touchscreen display. Usable on both left and right sides. Driven by PTO shaft or vehicle hydraulics. Foldable for transport – transport width 2.50 m. * DUA 800 boom with 3-part arm and telescopic extension. Reach from vehicle center up to 7.80 m. Hydraulic side shift by 1.60 m. Changeover from right- to left-hand operation possible. Swivel angle 270°. Standard boom relief and floating position. Flail mower head VMS 1200 with working width 1.20 m. * RSM boom with computer-assisted controls operated via control panel with automated buttons. Ideal for mowing around guide posts, signs, and trees. Reach from vehicle center up to 3.60 m to the side and 3.20 m to the front. Can be switched from right- to left-hand operation. Flail mower head TMK 1300 with working width 1.30 m. Automatic tilt adjustment. * Working width: 1.2 m | 1.3 m. Weight: 2,300 kg. Drive: PTO shaft/vehicle hydraulics. Mounting: Municipal plate size 3 | Municipal plate size 5. Reach: 7.80 m | 3.60 m. Boom swivel angle: 270°. Hydraulic side shift: 1.6 m. PTO shaft speed max. 710 rpm. Vehicle hydraulic requirement: min. 68 l/min at 340 bar. Transport width: 2.5 m. If a new TÜV inspection is required, we will be happy to provide a quote from one of our partner workshops. Our offering is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misconceptions about the condition and suitability. Viewing and inspection are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We assume no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale and errors.

Condition: used, mileage: 29,002 km, power: 74 kW (100.61 HP), first registration: 03/2015, fuel type: diesel, empty load weight: 2 kg, maximum load weight: 2,400 kg, overall weight: 5,000 kg, axle configuration: 4x4, wheelbase: 2,500 mm, brakes: other, color: green, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 2,100 mm, loading space width: 1,400 mm, loading space height: 300 mm, operating hours: 5,802 h, Equipment: additional headlights, all wheel drive, crane, differential lock, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * 1st hand * Condition see photos * Original only 29.002 Km * Only 5,802 operating hours * Three-way tipper with Fassi crane behind the cab * Fassi crane F30CY023 * Lifts to 1.85m = 995 Kg - 3.00m = 810 Kg - 4.10m = 580 Kg - 5.20m = 440 Kg - 6.30m = 335 Kg * Hook height 9 m * 5 + 6 control circuit * 2 hydraulic outriggers * 2 trailer couplings * Trailer load 3500 KG * Tipper dimensions length = 2,100mm - width = 1,400mm - height = 300mm * Dücker UNA 200 flail mower available at extra cost * High front wall * Aluminum loading flaps * Height-adjustable municipal worktop with hydraulic connections * Four-wheel steering * EasyDrive (hydrostatic drive) * Rotary servo * 2 comfort seats * Rear wall window * Sliding window * Roof hatch * Differential lock * Municipal lighting and headlights * Rotating beacons * Wheelbase: 2,500 mm * GVW: 5,000 kg * Unladen weight: 2,600 kg * Payload: 2,400 kg If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and testing of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. Djdsvhqu Aopfx Aixeck All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .