Used Good|2.7 Kw for sale (52,620)

Year of construction: 2020, condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology, agglomerator -Condition: The machine was a demonstration unit, equipped without a control system. -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable Quantity: 1 piece available -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm Codpfx Ajzbk Iyjdherh -Weight: 1900 kg

Condition: good (used), electric motor, three-phase motor -Manufacturer: Albany, electric motor -Item No.: Power: 0.55 kW -Speed: 1395 rpm -Shaft: Ø 14 x 27 mm with bevel gear -Design: B14 -Dimensions: 247/158/H190 mm -Weight: 10.6 kg/pc. Credjzmfu Djpfx Adhjh

Condition: good (used), Servo drive, servo card, input processor, control card, input card, control unit, converter, controller, servo module, axis amplifier, velocity control unit, spindle amplifier module, servo amplifier Credpfx Adszk D Tyehjh -Manufacturer: Stöber, transistor amplifiers -Type: TAS 1016 -Input: 230 V 50/60 Hz -Output: 0...160V 10.3A -Dimensions: 270/220/55 mm -Weight: 3.4 kg

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Crjdpsi Dfidofx Adheh Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: good (used), Three-phase motor, electric motor Crodpfxod R Dttj Adhoh -Power: 11 kW -Speed: 1440 rpm -Voltage: 380/660 V -Shaft: Ø 38/80 mm -Construction: B5 -Protection class: IP44 -Price: per piece -Number: 3 pieces -Dimensions: 520/286/H330 mm -Weight: 86 kg

Year of construction: 2026, condition: used, New: Yes Empty weight: 400 kg Dimensions of cargo space: 150 x 130 x 107 cm CE mark: yes Please contact Team DPX for more information Codpfx Adoznr Dbshorh AC400V-200kW Automatic Load Bank Rated Voltage: 3P4W AC400V 50/60 Hz Rated Voltage & Frequency: 400VAC; 3 phase 4 wire, 50/60 Hz Power Supply: 3P5W AC400V 50 Hz Rated Power: 200 kW at 400V Duty Cycle: Continuois Cooling Type: Forced Air Cooling (Horizontal air intake and exhaust cooling, there will be louver at air outlet and inlet.) Load Steps: Resistive Load: 9 steps, 1, 2, 2, 5, 10, 10, 20, 50, 100 kW Wire Connection: - Load bank input— busbar (star coupling “Y”) - Control power input—terminal block Communication Interface: RS232/RS485

Condition: good (used), Year of construction: 2006, radial fan, dust extraction blower, fan, extraction, dust blower, blower Crjdpfx Adezwdn Dehsh -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg

Condition: good (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Hofmann table milling machine, built in 1978, in a heavy-duty industrial design. The machine is equipped with a Holz-Her 3-roller feed unit ETZ and is suitable for a variety of milling operations in carpentry workshops, joineries, and in the furniture and interior design industries. The height adjustment of the milling spindle is conveniently done via a handwheel. The milling jaws can be adjusted manually. Three different spindle speeds allow for adaptation to various milling operations. In addition, the machine is equipped with 3 Aigner rails. Technical data Manufacturer: Hofmann Year of construction: 1978 Milling spindle diameter: 30 mm Spindle speeds: 6,000 / 8,000 / 10,000 rpm Height adjustment: by means of a handwheel Milling jaw adjustment: manual Dust extraction connections: Ø 120 / 140 mm Machine size: approx. 2,700 x 1,100 mm Heavy-duty table and machine construction made of cast iron Equipment Holz-Her 3-roller feed unit ETZ 3 feed rollers Height-adjustable feed unit Manual milling fence 3 Aigner rails Csdpfjzvdk Asx Adhorh Milling spindle Ø 30 mm 3 spindle speeds Handwheel for height adjustment Dust extraction connections Accessories as shown in the photos Scope of supply Hofmann table milling machine Holz-Her 3-roller feed unit ETZ 3 Aigner rails Accessories as shown in the photos The machine can be inspected and tested under power by appointment. Transport possible for an extra charge! The machine is subject to differential taxation according to § 25a UStG. The machine will be inspected before sale. For used machines with a year of construction of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: used, Used three-phase electric motor from Elektromotoren Scholz GmbH, based on a Siemens motor. Manufacturer: Elektromotoren Scholz GmbH Motor base: Siemens Crsdpfjzuf Tvjx Adheh Type: 1LA6223-4AA66225M Motor number: 9954154 Motor type: Three-phase motor Rated power: 45 kW Rated speed: 1475 rpm Rated voltage: 400 / 690 V Rated current: 80 / 46 A Frequency: 50 Hz Power factor cos φ: 0.87 Insulation class: F Protection class: IP55 Frame size: 225M Number of poles: 4-pole Condition: used

Condition: refurbished (used), Used AGTOS three-phase motor with 11 kW power, flanged design. The motor was overhauled and tested in March 2026. Manufacturer: AGTOS Type: 1PC38041DA234CT0 Motor number: 15/253398/7 Motor type: Three-phase motor Power: 11 kW Rated speed: 2955 rpm Rated voltage: 400 / 690 V Rated current: 19.6 / 11.3 A Frequency: 50 Hz Power factor cos φ: 0.89 Rated efficiency: 91.2 % Efficiency class: IE3 Frame size: 160M Design: B5 Protection class: IP55 Insulation class: F Operating mode: S1 Number of poles: 2 Weight: 84 kg Codpfx Adozuf U Hjhorh Bearing, drive end: 6211-2ZC3 Bearing, non-drive end: 6309-2ZC3 Lubricant: Unirex N3 Condition: used, overhauled and tested Overhaul: March 2026

Condition: used, mileage: 100 km, power: 100 kW (135.96 HP), first registration: 02/2024, fuel type: electric, overall weight: 2,390 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), tail-lift, RRP: €41,000. Technical data & drive: Power: 100 kW / 136 hp * Torque: 260 Nm * Top speed: 135 km/h * Battery capacity: 50 kWh net / 54 kWh gross Credezt Ulxepfx Adhsh * Range: Up to 275–345 km according to WLTP Charging times: DC (Direct Current): Up to 100 kW at a fast-charging station (0 to 80% in approx. 30 minutes). * AC (Alternating Current): Three-phase charging at a wallbox with up to 11 kW. Special equipment: Rear wing doors with glazing Metallic/mineral effect paint Opel Connect Rear parking pilot system Additional equipment: Driver's airbag, audio controls on the steering wheel, audio system BT (Bluetooth/USB interface), electric vehicle, electric motor 100 kW (cont. 57 kW), body/superstructure: van, charging cable with Schuko plug (Mode 2), closed cargo area partition, on-board charger (11 kW), wheel hub covers, wheelbase 2785 mm, halogen headlights, sliding door on the right.

Condition: excellent (used), Year of construction: 2019, Geared motor, electric motor, electric geared motor, worm geared motor, flat geared motor -Condition: Geared motor is unused Crsdpfxszu S Hps Adhsh -Manufacturer: NORD DRIVESYSTEMS, Flat gearbox series F -Type: SK7382AZH-180MP/4 TF -Speed: 22 rpm -Power: 18.5 kW -Protection rating: IP55 -Hollow shaft: Ø 70 mm -Dimensions: 930/450/H660 mm -Weight: 410 kg

Condition: used, mileage: 80,594 km, power: 130 kW (176.75 HP), first registration: 10/2022, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 01/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Equipment: * Body/Superstructure: High-roof standard van, * Air conditioning system, * Adjustable driver's seat, * Double passenger seat with storage/compartment, * Storage Package 2, * Wooden floor with lashing rails, * Lashing rails in the cargo area, * Cargo area partition with window, * Rear doors with increased opening angle, * Trailer hitch 3,000 kg with step, Technology: * Composition Colour audio system, * Digital radio reception (DAB+), * SD card interface / USB, * Multimedia interface 2 x USB (Type C), * Mobile phone interface Bluetooth, * Mobile online services App-Connect, * Pre-wiring for tachograph, * Exterior mirrors electrically adjustable and heated, * Parking assist front and rear with active flank protection, * Rear view camera, Safety/Environment: * Airbag driver/passenger side, * ABS/ASR/ESP, * Trailer stabilization program, * Emergency call system, * Low emissions according to Euro 6d emission standard, * Start/Stop system for engine, Codpfozxkffox Adhsrh Other: * 2 previous owners, * Originally delivered in Germany, * Truck registration, * Engine 2.0 L - 130 kW TDI, * Wheelbase 4490 mm, * Permissible total weight 3.50 t, * COC certificate available, Since 1972, we have been your reliable partner for all things automotive/commercial vehicles in 28832 Achim, near Bremen. Behnke Commercial Vehicle Center constantly has approximately 200 vehicles in stock, including vans, commercial vehicles, and construction machinery! We offer attractive financing options at favorable special conditions. If you are interested, we will be happy to create an individual offer for you! We welcome the trade-in of your commercial vehicle/construction machinery. If a new TÜV (technical inspection) is desired, we will be happy to provide you with a quote from our partner workshops. Our offer generally does not include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 8 (5 to 13 bar) include controller Air Control Basic Year of construction: 2025 Operatin hours: 1 Technical specifications Type: Combi XP 8 Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.17 to 1.43 m³/min at 6 bar (g): 0.17 to 1.35 m³/min at 7 bar (g) : 0.17 to 1.25 m³/min at 8 bar (g) : 0.17 to 1.16 m³/min at 9 bar (g) : 0.17 to 1.07 m³/min at 10 bar (g) : 0.17 to 0.98 m³/min at 11 bar (g) : 0.17 to 0.89 m³/min at 12 bar (g) : 0.16 to 0.83 m³/min at 13 bar (g) : 0.16 to 0.75 m³/min Nominal power drive motor: 7,5 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400/42-230 V / Hz Compressed air connection: 3/4“ G Length: 691 mm Width: 1051 mm Height: 1088 mm Weight: 350 kg Visit our store. Codpfx Adjxqn Afohsrh We always have a large selection of new and used compressors in stock! Available immediately.

Condition: used, functionality: fully functional, power: 24 kW (32.63 HP), color: orange, operation weight: 2,400 kg, Year of construction: 2020, operating hours: 2,400 h, Hamm HD12 i VT combination roller, new model Year of manufacture: 2020 24 kW Kubota engine, type D1803-CR Credpfezzpibox Adhjh 2,400 - 3,320 kg Edge cutting wheel 120 cm working width

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: iASN075N - 2200xxxxxxx, cooling capacity: 164 kW (222.98 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,634 kg, ambient temperature (max.): 46 °C, ambient temperature (min.): -10 °C, input voltage: 400 V, pressure: 10 bar, temperature: 7 °C, volume flow: 28.9 m³/h, total width: 2,241 mm, total length: 3,541 mm, total height: 2,425 mm, warranty duration: 12 months, input frequency: 50 Hz, Equipment: type plate available, Sales exclusively to customers with a German billing and delivery address! Process chiller / chilled water unit, air-cooled, Type: iAries N iASN 075 HE Special – R290 MTA S.p.A. The Aries N iASN 075 HE Special is a compact chilled water unit suitable for outdoor installation. The unit is Eurovent certified. Equipment: - Refrigerant R290 - HE version, - INVERTER, - Plate heat exchanger, - EC brushless fans, - Direct start of the compressors, - Compressor on/off valves, - Microchannel condenser coil, - Complete enclosure of the compressors - Smaller evaporator than the standard unit - Smaller Ziehl fans with an 800 mm diameter. Cooling capacity (kW): 164 Chilled water temperature outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 28.9 Available head pressure bar: 0 Ambient temperature (°C): 35 Refrigeration circuit: Refrigerant R290 Refrigeration circuits (number): 2 Compressors (number): 1 + 1i Power levels (%): 25 to 100, continuously adjustable Electrical data: Voltage V 400, Frequency Hz 50, Phases Ph 3, Max. power consumption (kW): 67 Max. current (A): 117 Starting current circuit (A): 315 Protection class: IP54 Csdpoxaz Iyefx Adherh Dimensions: Length (mm): 3541, Width mm 2241, Height mm 2425 Weight (kg): 2634 Connection: Vitaulic DN 80 Serial No.: 2200xxxxx Year of manufacture: 2024 Condition: Optically 1, Technically ok Stored unit, new Price: on request in Euro (plus VAT, ex works MTA Italy) – 12 months warranty (Subject to technical changes and prior sale!) Location: MTA, Tribano

Condition: good (used), functionality: fully functional, For sale is a used miter saw/undercut miter saw from the manufacturer Irion & Denz Maschinenbau, Lörrach. The machine is equipped with pneumatic saw blade travel, two-hand operation, and spacious roller tables and is suitable for efficient cutting and mitering of wooden workpieces. Technical data/equipment: Manufacturer: Irion & Denz Maschinenbau Place of manufacture: Lörrach Machine type: Miter saw / Undercut miter saw Max. saw blade diameter: 500 mm Max. cutting height: 100 mm Max. cutting width: 330 mm Saw blade travel, pneumatically controlled, continuously adjustable Cutting activation via two-hand operation Pneumatic workpiece clamping Adjustable workpiece stops Extension tables with free-rolling or powered rollers Spacious roller conveyors for longer workpieces Robust industrial design Additional equipment: Stop with electronic positioning Length measurement input via keyboard or length optimization Electronic positioning/length optimization currently defective The machine is in used condition. Equipment and condition as shown in the photos. Transport is possible for an additional charge! Cjdpfezymwmsx Adhorh The machine is currently still at the customer's site, but would be available shortly. The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, For sale is a used WINTER MRS-300 multi-blade circular saw, manufactured in 2013. This machine is suitable for the efficient longitudinal cutting of solid wood, boards, and strips. Thanks to its continuously adjustable chain feed and electric height adjustment, it is ideal for use in industrial or artisanal woodworking applications. The machine features an infeed roller conveyor and automatic lubrication. Technical data: Manufacturer: WINTER / Henrik Winter Holztechnik GmbH Type: MRS-300 Series: New Line Year of manufacture: 2013 Machine number: 13310021 Chain width: 300 mm Cutting height: 10–100 mm Saw blade diameter: 200–350 mm Total connected power: approx. 25 kW Crsdpfxozxxmke Adhsh Voltage: 380 V Frequency: 50 Hz Working height: approx. 740 mm Table size: approx. 1,530 × 760 mm Continuously adjustable chain feed Electric height adjustment Automatic lubrication Infeed roller conveyor Dust extraction connection Dimensions: approx. 2,200 × 1,500 × 1,580 mm Weight: approx. 2,500 kg Equipment: Infeed roller conveyor Multi-blade saw arbor Continuously adjustable feed control Electric height adjustment Central control panel Automatic lubrication Dust extraction hood / dust extraction connection CE marking Transport is possible for an additional charge! The machine is currently still at the customer's site but would be available shortly! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), functionality: fully functional, Manufacturer Siemens Codpfxezyzw Us Adherh Power 11 kW Speed 1455 rpm

Year of construction: 1995, condition: excellent (used), functionality: fully functional, machine/vehicle number: 20/192, We are offering this used elumatec KF 178 in very good condition, year of manufacture 1995. Model: KF 178 Machine no.: 20 192 Crjdpfx Ajy D I R Sodhoh Voltage: 230/400 V Frequency: 50 Hz Current: 3.6/2.1 A Speed: 12,000 rpm Operating pressure min.: 5 bar Operating pressure max.: 8 bar If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, For sale is a robust Braun Canali band saw / resaw, type 1100, manufactured in 1978. The machine is in very good used condition and is designed for professional use in sawmills or for solid wood processing. The machine is particularly suitable for cutting and resawing boards and planks and features stepless feed and cutting depth control. Cedpfx Aozxrtqjdhjrh Technical data: Manufacturer: Braun Canali Type: 1100 Year of manufacture: 1978 Machine no.: 6234 Motor power: 15 kW Saw band length: 6,800 mm Saw band width: 60–100 mm Roller diameter: approx. 1,100 mm Stepless feed Weight: approx. 3,800 kg Can cut logs up to approx. 3,000 mm length × 600 mm diameter Equipment: Resawing device for cutting boards and planks programmable cutting depth control ELGO Electric Type 87P pneumatic lifting unit Cutting depth programmable – programming function currently defective Cutting depth can be adjusted manually on the control panel: 15–85 mm heavy-duty industrial design Condition and scope of supply as shown in the photos Important note regarding the control system: The programmable cutting depth control is currently not functional. However, the cutting depths can be adjusted manually via the control panel from 15 to 85 mm. Overall, the machine is in very good used condition. Inspection and demonstration possible by appointment. The machine is currently still at the customer's site, but would be available shortly! Transport possible for an extra charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Subject to errors, prior sale and changes. All information without guarantee.

Condition: good (used), PEZZOLATO TM 400 – PROFESSIONAL LOG SPLITTER / WOOD PROCESSING MACHINE For sale: a professional log splitter from PEZZOLATO, model TM 400. This machine is designed for mechanical cutting and splitting of firewood. Its robust, industrial construction makes it ideal for farms, companies involved in firewood production, or wood processing plants. THE MACHINE IS 100% FUNCTIONAL AND READY FOR WORK. In addition, the discharge conveyor is equipped with a NEW BELT. TECHNICAL SPECIFICATIONS: • Manufacturer: PEZZOLATO S.p.A. – Italy • Model: TM 400 Cjdpfx Aez Awv Eedhjrh • Year of manufacture: 2009 • Machine number: SES3714 • Electrical power supply: 400 V • Electric motor power: 15 kW • Machine weight: approx. 1600 kg • Chainsaw • Maximum cutting diameter: approx. 400 mm • Hydraulic splitting system • Discharge conveyor • NEW discharge conveyor belt • Option for tractor drive via PTO DRIVE: The machine can be powered in two ways: 1. Electric motor – 15 kW / 400 V 2. From a tractor via the PTO shaft – mechanical drive provided by the manufacturer Thanks to the PTO drive option, the machine can also be used in locations where there is no suitable electrical power supply. TECHNICAL CONDITION: The machine is fully functional and ready for further use. The saw, hydraulic system, log splitter, and conveyor are all working correctly. The discharge conveyor belt is NEW. Visually, the machine has normal signs of use and wear. These are signs resulting from the machine's use and age. The machine is used but technically sound and regularly maintained. DOCUMENTATION / NAMEPLATE: PEZZOLATO S.p.A. Model: TM 400 Year of manufacture: 2009 Machine number: SES3714 Electrical cabinet: • 400 V • 50 Hz • Nominal current 50 A • IP54 • Year of manufacture 2009 SALE: Sold complete, in the configuration shown in the photos. It is possible to view the machine and test its operation before purchase.

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, operating pressure: 10 bar, machine/vehicle number: 5789, CYCLONE MAXI is an indispensable and powerful 10 bar steam cleaning machine designed for a wide range of industrial environments and applications in demanding and diverse sectors such as food and beverage processing and manufacturing, transportation, and general industry. The CYCLONE MAXI range has been conceived and developed to provide a truly professional alternative to conventional cleaning equipment, with a focus on cleaning effectiveness while minimizing environmental impact. The hot, dry steam penetrates deep into surfaces to deliver thorough cleaning and disinfection. CYCLONE MAXI is supplied complete with a set of professional tools and accessories. CE-PED tested/certified Crsdpfsyft T Tex Adhoh Accessories: 6-metre steam hose Steam gun

Condition: reconditioned (used), 1 pair of PERSKE flat motors, 5.5 kW each, well suited for pre-cutting circular saws in front of band saw lines, one with a right-hand thread and one with a left-hand thread, rated continuous power 5.5 kW, with new ball bearings, with 2 steel brackets (left and right) for mounting 1 KATT circular saw flat motor, 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second shaft stub for hydraulic pump drive with 150 mm Ø pulley, tested and fitted with new bearings, suitable e.g. for PAUL 27 AO cross-cut saw Cjdpfxjuqk Aze Adherh

Condition: used, Hydraulic unit with 3 PARKER hydraulic pumps Hydraulic unit Year of construction: 2012 ----- Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor Type (Pump 1): PV180R1K4KJNMMZ Serial No.: 20921237 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 180 cm³ / revolution Flow rate: approx. 260 liters/min. at 1480 rpm (calculated value) Maximum speed: 2200 rpm - Pressure regulator PARKER Type PVCMEMZN1 Type (Pump 2): PV046R1L1T1NM Serial No.: 20920701 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 46 cm³ / revolution Flow rate: approx. 68 liters/min. at 1480 rpm (calculated value) Maximum speed: 2800 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1480 rpm Motor power: 90 kW ----- Hydraulic pump, axial piston pump PARKER with 11 kW drive motor Type: PV016R1K1T1NMM1 Serial No.: 20764606 / 001 Nominal pressure p dmax.: 350 bar Maximum pressure p max.: 420 bar Displacement volume: VG max. = 16 cm³ / revolution Flow rate: approx. 23 liters/min. at 1440 rpm (calculated value) Maximum speed: 3000 rpm - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1440 rpm Motor power: 11 kW ----- Hydraulic pump, vane pump PARKER/DENISON with 7.5 kW drive motor Type: T6CC 020 020 1R00 C1W1 Series: 11F29 431 Code: Displacement volume: VG max. = 16 cm³ / revolution - Pressure regulator PARKER Type PVCMAM1N1 Motor speed: 1450 rpm Motor power: 7.5 kW ----- Csdpozqgllofx Adhjrh Power connection: 400 Volt, 50 Hz - Dual hydraulic pump, axial piston pump PARKER with 90 kW drive motor - Type (Pump 1): PV180R1K4KJNMMZ, Type (Pump 2): PV046R1L1T1NM - Hydraulic pump, axial piston pump PARKER, Type PV016R1K1T1NMM1 with 11 kW drive motor - 1 hydraulic pump, vane pump PARKER/DENISON, Type: T6CC 020 020 1R00 C1W1 with 7.5 kW drive motor - 2 pressure accumulators PARKER, Type AP180EM050H2K and A4ES0578H2KRF - 1 temperature sensor SAMSON, Type 2750 - 1 hydraulic pressure filter WICKERT, Type W 503 909- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 504 290- 420 bar - 1 hydraulic pressure filter WICKERT, Type W 505 603- 420 bar - 2 return filters WICKERT, Type W 503851 / W503995 - 1 water-oil cooler HYDAC, Type Hex S615-60-00/G1" - 3 cleaning covers Ø 380 mm - 1 oil level gauge - Tank dimensions L x W x H 2600 x 1700 x 800 mm - Filling capacity / tank volume: 2100 liters (sold without oil content) Overall dimensions with attachments L x W x H 2700 x 2250 x 2840 mm Weight: 3500 kg very good condition