Used Feeler Ftc 350 Lmc for sale (6,276)

Condition: new, 355 mm 350 x 350 mm saw band length 4640 x 34 x 1,1 mm table height mm band speed 15 - 115 m/min total power requirement 4,0 kW weight of the machine ca. 2,8 t dimensions 3,1 x 2,2 x 2,2 m Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two Column construction for 0° cuts on solid material and steel profiles, Stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: Podpfx Akjfg E Hzjijrc + Powered chip conveyor, can be installed on the right or left of the machine. + Clamping pressure regulation of the vices. + Feeder with vertical rollers for lateral material support. + Numerically controlled band saw machines, which are also operated semi- automatically can be done with the new MEP 50, especially from MEP for automatic Machine developed, Windows “CE” based control. + Cutting cycle “clean cut” The feeder pushes the workpiece at the back to avoid scoring on the cutting surface when the tape moves up again at the end of the cut. + Fieldbus communication system with double microprocessor and serial Connection. + The user interface with 7” touch screen display and mechanical Buttons are used to ensure the operating functions of the sawing machine reliable, simple and intuitive use, as well as a Real-time control of all cutting parameters

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material Prjdpfxsfgyics Akiec 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Condition: used, Pipe sealing bag, leak sealing bag, sealing plate, pipe sealing -Pipe sealing cushions -Outside/inside: Ø 350/273 mm Prodpfxsd Sqygo Akioc -Height: 58 mm -Number: 2x pillows available -Price: per piece -Weight: 5.8 kg/piece

Condition: used, Stick electrodes 4.0 x 350 -Type: FOX DMO Ti -Price: per package -Number: 6 packages available Prodod Elvnopfx Akioc -Weight per package: 4.6 kg

Condition: used, Stick electrodes 4.0 x 350 Psdpfx Aod Elvqskiorc -Type: FOX DMO Kb -Price: per package -Number: 7 packages available -Weight per package: 4.6 kg

Condition: used, Stick electrodes 3.2 x 350 -Type: Phoenix K 50 Predpfxed Emg Ds Akijc -Price: per package -Number: 6 packages available -Weight per package: 4.5 kg

Condition: used, Stick electrodes 2.5 x 350 -Type: P 48S -Price: per package -Number: 9 packages available Prodod Emhcopfx Akioc -Weight per package: 4.5 kg

Condition: used, Stick electrodes 4.0 x 350 -Type: SL 19 G -AWS: A5.5-96: E8018-B2-H4 -Price: per package -Number: 10 packages available -Weight per package: 1.6 kg Prjdpfod Emhdox Akijc

Condition: used, Stick electrodes 3.2 x 350 Predpod Emhfjfx Akiec -Type: FOX DCMS Kb -Price: per package -Number: 5 packages available -Weight per package: 4.3 kg

Condition: used, Stick electrodes 2.5 x 350 Psdod Emhgjpfx Akijrc -Type: COMET J50N -Price: per package -Number: 4 packages available -Weight per package: 4.1 kg

Condition: good (used), Stick electrodes 2.5 x 350 -Type: Gricon 8 A Price: per package Prodpfod Ivn Iex Akioc -Number: 3 packages available -Weight per package: 4.6 kg

Condition: good (used), Stick electrodes 4.0 x 350 -Type: Fincord Pjdpfx Akod Ivn Soisrc -Price: per package -Number: 4 packages available -Weight per package: 4.3 kg

Condition: used, Stack electrodes, welding electrodes -Stable electrode: 4.0 x 350 -Type: FINOX 4337 AC Podpfod Iygmsx Akijrc -Weight: 5.1 kg

Condition: good (used), Stick electrodes 4.0 x 350 Psdpfx Akjd I Alueiorc -Type: FE 1006 (FE Yellow S) -Weight per package: 4.6 kg

Condition: used, Equipment: type plate available, Powerful TIG Welding Unit for Professionals The EWM TIG 350 DC FWD is a high-quality, water-cooled DC TIG welding unit from EWM, engineered for demanding applications in metal construction, industry, and professional workshop environments. This high-performance machine enables precise DC TIG welding with up to 350 A welding current and offers superior arc stability, high weld quality, and efficient cooling – ideal for steel, stainless steel, nickel alloys, copper materials, and other metal workpieces. 🔧 Welding Performance and Technology Direct current TIG welding (DC) with an adjustable range up to approximately 350 A – powerful penetration and precise control. Robust inverter electronics ensure stable arc performance and high efficiency. The water-cooled design allows continuous operation even under heavy-duty conditions. Pedpfx Akoyililoisrc ⚙️ Features and Operator Comfort Proven operation with an intuitive control panel – easy adjustment of welding parameters. Connection options for remote control and torch functions for added convenience. Splash-proof housing rated to IP23, suitable for tough workshop environments. Energy-efficient operation thanks to high efficiency and standby function. Dimensions: 1000 x 520 x 900 mm Weight: approx. 180kg All information subject to change or errors.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, - High-pressure cleaner PTC Torpedo Compact 21/250, 21/350, and 15/500 – similar to, but not a Dynajet, Oertzen, Falch, etc. - Cold water/hot water at approx. 95°C and steam at 32 bar up to 140°C + high-pressure steam up to 150°C at 200 bar (only in versions with 250 and 350 bar) and a chemical-free weed control function with approx. 99°C. The following models are available: - Torpedo Compact 23/250 | 23 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 23/350 | 23 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/500 | 16 l/min. at 500 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/250 PS (high-pressure steam) | 16 l/min. at 250 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Torpedo Compact 16/350 PS (high-pressure steam) | 16 l/min. at 350 bar | Diesel engine: Kohler KDW1003 18.9 kW with electric starter - Dimensions and empty weight without water tank: 1205x1250x1330mm, approx. 280kg - Dimensions and empty weight with 300 l water tank: 1250x1900x1330mm, approx. 350kg - Dimensions and empty weight with 500 l water tank: 1250x1900x1330mm, approx. 350kg - 80/100 kW diesel burner with electronic temperature control - High-pressure pump: Comet RW/TW three-plunger pump with ceramic plungers Pedpfx Ajdqkrwekiorc - Operating hour counter - Manometer - Pressure regulator - Safety valve - High-quality frame made of painted steel with forklift slots - Covers made of stainless steel - Magnetic descaling device - incl. 20 m high-pressure hose, spray gun, lance, and flat jet nozzle 25° - Further accessories such as a frame for the water tank, water tank 300 or 500 l, water-sandblasting kit, surface cleaner, rotating nozzle, sludge suction pump, steam nozzle, weed control lance and bar available on request.

Condition: excellent (used), Year of construction: 2002, ARBURG 320 S 350-150 (2002) General information 1. Manufacturer: ARBURG Pjdpfswmqx Rex Akisrc 2. Model: ALLROUNDER 320 S 350-150 3. Year of manufacture: 2002 4. Machine type: Hydraulic injection moulding machine 5. Control system: ARBURG SELOGICA (version to be confirmed) Clamping unit 1. Clamping force: 350 kN (35 ton) 2. Platen dimensions: 455 × 455 mm 3. Distance between tie bars: 320 × 320 mm 4. Maximum daylight: 575 mm 5. Minimum mould height: approx. 175 mm (to be confirmed) Injection unit 1. Screw diameter: 30 mm 2. Screw type: Wear-resistant, suitable for materials with up to 30% glass fibre (as specified) 3. Injection pressure: approx. 2,210 bar 4. Maximum injection volume: approx. 78 cm³ 5. Maximum shot weight (PS): approx. 71 g 6. Maximum screw stroke: approx. 110 mm 7. Effective screw length: 20 L/D 8. Maximum injection flow: approx. 82 cm³/s Hydraulic system 1. Hydraulic pump motor power: approx. 11 kW 2. Hydraulic oil capacity: approx. 120 l Dimensions and weight 1. Machine weight: approx. 2,250 kg 2. Country of manufacture: Germany

Condition: used, mileage: 20 km, power: 96 kW (130.52 HP), first registration: 07/2026, fuel type: diesel, wheelbase: 3,750 mm, color: white, number of seats: 3, construction height: 2,530 mm, working width: 2,059 mm, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), fog lights, onboard computer, sliding door, soot filter, traction control, Automatic climate control, central locking with remote control, power-adjustable and heated exterior mirrors, power windows, on-board computer, driver assistance system: hill start assist, driver assistance system: lane keeping assist, driver assistance system: emergency brake assist, driver assistance system: lane keeping assist with fatigue detection sensor, cruise control, leather steering wheel, front and rear parking pilot system, rear view camera, spare wheel with regular tires, heated windshield, windshield wipers with rain sensor, daytime running lights, fog lights, audio system 13: digital radio reception (DAB/DAB+) with 4 multifunction displays, audio system: radio with USB and Bluetooth hands-free system, hands-free system, tinted heat-reflecting glass, anti-lock braking system (ABS), electronic stability program (ESP), driver's cabin seats: driver's seat with lumbar support, start/stop system, particulate filter, service booklet maintained, sliding door cargo/passenger compartment right, steel rims 6.5x16, seat package 8A: driver's seat (4-way adjustable) - double passenger seat - fabric, preparation for trailer coupling, electrical (socket and cable), paint: frost white, interior paneling in cargo/passenger compartment: high, driver's seat armrest, floor covering: vinyl in cargo/passenger compartment, interior paneling in cargo/passenger compartment: vinyl, headlight assistant with day/night sensor, driver assistance system: intelligent speed control, manual DPF regenerator, parking brake, electrical, cargo area light, LED, exterior rear lights, upper, LED, technology package 2, audio/radio remote control on the steering wheel, docking station (MyFord Dock), permissible total weight 3.50 t, body variant: medium-height roof, radiator grille with chrome strip, integrated rear step, trailer stabilization program (TSA), turn signal integrated into exterior mirror, cornering light in headlight, windshield wipers with intermittent function - adjustable, mud flaps rear, digital radio reception (DAB+), radio preparation - 4 speakers, FordPass Connect including eCall, roll stability control (RSC), storage compartment in driver's cabin headliner, air conditioning, heater with recirculation function, auxiliary heater, electrical, My Key (2nd vehicle key programmable), rear hinged doors (opening angle 180 degrees), door entry lights, lashing eyes (10), shift/selector lever knob, leather, electronic brake force distribution (EBD), steering column (steering wheel) adjustable in height/length, electronic traction control, driver assistance system: crosswind assist, Trend, body/structure: high-roof standard van, wheelbase 3750 mm, drive type: front-wheel drive, 6-speed gearbox, over 150 vans and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we will be happy to advise you. This offer is non-binding, no guarantee for equipment details. Listed equipment may need to be checked separately. Subject to change, errors and prior sale. Delivery possible for an extra charge. Export license plates available here. Trade-in of your old vehicle. Retrofitting of: - trailer couplings up to 3500 kg possible - auxiliary heaters - screen for reversing camera and/or navigation via mobile phone (Android Auto) - reversing system with rear camera - workshop equipment - cruise control - retrofitting of a tail lift and other individual solutions for your business needs possible for an extra charge. Pjdpfjzi T T Hsx Akiorc

Condition: excellent (used), Year of construction: 2010, Engel Victory 2550/350 Tech with Engel Viper 40 robot Year of manufacture: 2010 Prjdpfx Akjz Ipvfjioc Injection unit: Screw diameter: 80 mm Shot weight: approx. 1410 g Injection pressure: 1638 bar Dosing volume: 1558 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 0x0 mm Platen size: 1200x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Production line with Engel Viper 40 robot Tie-barless machine Robot interface Air core puller x 4 on the side of the fixed platen Hydraulic core puller x 2 on the side of the moving platen Hydraulic core puller x 1 on the side of the fixed platen Control system with hot runner system x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Robot Engel Viper 40 Year of manufacture: 2010 6-axis robot: 5 axes are driven by servomotors (electric): X, Y, Z, B (rotation), A; axis C - pneumatic Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt available for an additional charge Dimensions: Weight: 25100 kg Length/Width/Height: 7.59x2.18x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2009, Arburg 420C 1000-350/150 / Production line with the Arburg Multilift H side robot / 2K machine Year of manufacture: 10.2009 Injection unit: Screw diameter: 45 mm Shot weight: 210 g Injection pressure: 1670 bar Dosing volume: 230 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 420x420 mm Mold size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Prsdpfez Ipyksx Akioc Additional equipment: Production line with the Arburg Multilift H side robot 2K machine with rotary table Control system with air valve Hydraulic core pull x 2 Control system with hot runner Reinforced injection units – bimetal Proportional valves on injection units – precise injection The vertical injection unit – screw diameter: ⌀30 mm – 71 g/shot Rotary table available at an extra charge Side robot Arburg Multilift H Year of manufacture: 2009 5-axis robot: Z-axis with servo motor (electric); X, Y, B and C axes pneumatic Safety package for robots Robot with adapter, conveyor belt, protective housing Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 5210 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request.

Condition: excellent (used), Year of construction: 2001, Arburg 470S 1300-350 Year of manufacture: 2001 injection unit: Screw diameter: 35 mm injection weight: 117 g Injection pressure: 2500 bar Metering volume: 139 ccm Clamping unit : clamping force: 130 t tie bar distance : 470x470 mm size of clamping platens: 650x650 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Hydraulic core pull x 1 Control with hot runners x 6 Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection Predpfx Asz Ip Axokioc The built-in system for control of pressure quality from the brand Sensor Kistler - measurement of mold pressure type of injection unit: Vario - it offers the possibility to use the injection unit e.g. for lateral injection The new injection unit is installed in the machine Dimensions: Weight: 5100 kg Length/width/height: 4.45x1.49x2.17 m Drive: Pumps/motor: 22 kW Heating power: 10,2 kW Total power: 32,2 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), functionality: fully functional, Coil weight 350 kg Max. strip width 200 mm 11-roller straightening unit Roller diameter 60 mm 2 feed rollers 2 exit rollers Prsdpfx Asz I Swfekioc

Condition: used, mileage: 145,000 km, power: 125 kW (169.95 HP), first registration: 06/2023, fuel type: diesel, next inspection (TÜV): 06/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Special equipment: 2nd battery, airbag on passenger side, audio navigation system, audio system: radio with 12" multi-function display, automatic climate control, exterior mirrors, electrically foldable, floor covering: vinyl in the cargo/passenger compartment, speed limiter 130 km/h, rear wing doors without glazing (opening angle 256 degrees), cargo area light LED, cargo area partition, metal, tire repair kit, seat package 14: driver's seat (4-way adjustable) - passenger single seat (4-way adjustable) including seat heating, fabric, seats in the cab: driver's seat with lumbar support, seats in the cab: passenger seat with lumbar support, steel rims 6.5x16, technology package 10, audio system: radio with 4" multi-function display, parking pilot system front and rear, exterior lights rear top LED, trim in the cargo/passenger compartment: high, trim in the cargo/passenger compartment: vinyl Psdpfxoz H D E Ss Akierc Additional equipment: Storage compartment in the headliner of the cab, trailer stabilization program (TSA), audio system 13: digital radio reception (DAB / DAB+) with 4" multi-function display, audio system: radio with USB and Bluetooth hands-free system, audio/radio remote control on the steering wheel, docking station (MyFord Dock), radio preparation, 4 speakers, exterior mirrors, electrically adjustable and heated, turn signal integrated in the exterior mirror, on-board computer, entry lights, electronic brake force distribution (EBD), electronic traction control, FordPass Connect including eCall, rear wing doors (opening angle 180 degrees), heater with recirculation, body/superstructure: high-roof standard van, body variant: medium-height roof, radiator grille with chrome trim, steering column (steering wheel) height/length adjustable, engine 2.0 L - 125 kW TDCi CAT, My Key (2nd vehicle key programmable), parking pilot system front and rear, digital radio reception (DAB+), wheelbase 3750 mm, low emissions according to exhaust standard Euro 6d-TEMP, gear/selector lever handle, leather, windshield wipers with intermittent operation, adjustable, sliding door cargo/passenger compartment right, mud flaps rear, side protection strips, start/stop system, Trend, rear step integrated, lashing eyes (10), roll stability control (RSC), heat protection glazing slightly tinted, auxiliary heater, electric

Condition: ready for operation (used), Eisele VMS 350 Saw, Metal Circular Saw, Circular Saw Maximum cutting cross-section, round at 90°: 120 mm Prsdpfx Ajz Il Evskijc Maximum cutting cross-section, rectangular at 90°: 170 x 100 mm Maximum cutting cross-section, round at 45°: 120 mm Maximum cutting cross-section, rectangular at 45°: 120 x 100 mm Saw blade diameter: 350 mm Saw blade width: 3 mm Swiveling: 45-90-45-30° Rotational speed: 17 RPM; 34 RPM You are welcome to visit us for a viewing. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be prepared. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 39.963TW, working height: 1,300 mm, planer shaft diameter: 60 mm, workpiece height (max.): 250 mm, workpiece width (max.): 300 mm, power: 18.5 kW (25.15 HP), A new two-sided planing machine is for sale! TECHNICAL DETAILS Processing: Two-sided planing (calibrating) Thickness tolerance: < ±0.1 mm Workpiece length min./max.: 800 / 3,200 mm Minimum length for continuous feed: 1,250 mm Workpiece width max.: 300 mm Workpiece height min./max.: 20–250 mm (each ±1 mm) Passage height: 280 mm Working height: approx. 1,300 mm Number of spindles: 2 Spindle diameter: 160 mm Planer shaft diameter: 60 mm Feed speed: 5–20 m/min, continuously adjustable Ram columns: 4 × Ø 110 mm MACHINE DETAILS Input voltage: 3 × 400 V AC Frequency: 50 Hz Network type: TNS, for industrial networks Control voltage: 230 V AC / 24 V DC Power: 18.5 kW Power of feed motor: 9 kW Compressed air connection: 8 bar Electrical equipment: Télémecanique / MOELLER / SIEMENS Machine color: RAL 7035 Light Grey / RAL 3003 Ruby Red Cabinet color: RAL 7035 Light Grey / RAL 3003 Ruby Red Total weight: 7,000 kg EQUIPMENT Continuously adjustable feed speed Feed rollers individually and directly driven by separate gear motors Electronically synchronized feed rollers Grooved feed rollers in front of the planer shafts Smooth feed rollers at the outlet Hard-chrome-plated tables, feed rollers, pressure elements, and stops Automatic feed deceleration in case of overload Processing motors with electronic soft start controls Pjdpez A Ubisfx Akisrc Integrated DC motor brakes Télémecanique ALTISTART Control panel on a pivoting arm on the front wall of the cabinet