Used Extension Cable for sale (7,826)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,800 kg, maximum load weight: 34,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 40 ft with gooseneck tunnel, front extension extended: 1 x 45 ft with long gooseneck tunnel and rear overload The transport of filled tank containers is not permitted. Without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) 24 tons, 2-speed support legs, single-side operation, with straight lower part, without extension compensation Wedge blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-splash flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system Njdpji Riwmofx Aqwoda 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Test connection for brake cylinder pressure placed on the outside of the EBS module Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the side (Note! with certain towing vehicles, false diagnoses may occur, even if the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau, 10 years warranty against rust-through Support legs black coated without pallet box paint Note: Archive images!

Condition: used, functionality: fully functional, machine/vehicle number: VAVJS1339HD392852, empty load weight: 6,290 kg, maximum load weight: 32,710 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,470 mm, loading space height: 2,790 mm, total length: 13,840 mm, total width: 2,550 mm, total height: 40,000 mm, suspension: air, tire size: 385/55 R22,5", color: grey, available in multiple units The images are archive images; the vehicle may still be in use. Chassis, semi-trailer, for transport companies Fine-grained steel welded construction 24-ton support legs, single-sided operation, with semi-circular lower part and straight connection plate, with lateral support Extension ladder at the rear Door latches on the side Half-shell fenders above all axles Anti-spray flaps behind the 3rd axle 2 rear impact buffers 1 large plastic storage box mounted on the front right and 2 smaller plastic storage boxes mounted on the front left Tarpaulin rope all around with 2 retainers on the front wall (no customs seal) Axles + suspension SAF disc brake axles Air suspension Braking system 2-line pneumatic braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The semi-trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with raising and lowering valve Vehicle - driving stability system Nodpfjwyiygsx Aqwjda Wheels and tires 385/55 R22.5", manufacturer's choice Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear in LED 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Front wall / corner posts at the front 2 x 580 mm high, steel corner posts in full volume design, release mechanism for side tarpaulin on the front wall Rear wall / corner posts at the rear Steel corner posts at the rear up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal rotary bar locks each Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tension closures made of stainless steel Roof Sliding tarpaulin, rear end lift that can be folded up, with tarpaulin that can be slid from back to front available in multiple units The images are archive images; the vehicle may still be in use.

Condition: ready for operation (used), functionality: fully functional, fuel type: electric, empty load weight: 7,700 kg, lifting height: 9,500 mm, Year of construction: 2021, construction height: 1,869 mm, load capacity: 7,000 kg, machine/vehicle number: 0834, TECHNICAL DETAILS Lifting Capacity Crane lifting capacity without jib: 7,000 kg Crane lifting capacity with jib: 4,000 kg Crane lifting capacity with winch: 7,000 kg Forklifting capacity: 3,000 kg Lifting Height Lifting height without jib: 9,100 mm Lifting height with jib: 9,500 mm Lifting height with forks: 8,800 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,350 x 1,380 x 1,869 mm Own weight: 7,700 kg Steering: Rear axle steering, steering angle -90°/+90° Battery: 72 V - 640 Ah Motor: 1 AC electric motor 12 kW 72 V Ndjdpfxexxx Axo Aqwja Front tire size: 250-15" Rear tire size: 21x8-9" EQUIPMENT Radio remote control Electronic load limiter Non-marking tires Jib + extension Cable winch Fork carriage incl. forks

Condition: used, Technical details: pressure: manuell t stroke: 15 mm machine weight approx.: 8,4 kg dimensions of machine: 600x250x70 mm Pneumatic Cable Terminal Press - application: press of cable terminal on electrical cable and air-conditioning lines futher details: - press cylinder: slide Ø 25mm: outer diameter Ø 68mm: maximum extension length approx 15mm - tool fork: width=30mm ; length=70mm - maunal lever Ø 30 x L:300mm Nodpfsu Nfr Nex Aqwoda equipment - toolbox with div. round and hexagonal tool jaws i.D. *

Condition: good (used), MIG/MAG hose package extension, intermediate hose package Ndjdpfocill Tox Aqwja -Length: 27 m -Version: Dinse plug, gas hose, control cable -Weight: 64 kg

Condition: excellent (used), Various Renishaw probe heads MIH as shown in the offer. The MIH is equipped with an automatic tool changer for fast and reproducible probe changes. Compatible with most Renishaw measuring probes. An integrated LCD position display allows for easy programming and storage of up to 20 measuring probe positions. Extensions up to 300 mm can be used. Technical data: Weight: 580 g Mounting of the measuring probe: Automatic collet (NOTE: Not for measuring probes with multi-channel technology) Mounting of the probe head: MS series shanks Interface: PI 200-3, PI 7-3 Display of the measuring probe status: LED Cable connection: 5-pin DIN 180° connector Nedpfx Aedy Apmsqwoda Indexability of the A-axis: 0° to 105° in 7.5° increments Indexability of the B-axis: ±180° in 7.5° increments Reproducibility of positions (2s): 1 µm (TP6A with 21 mm probe stylus) Max. extension: 300 mm Max. permissible torque: 0.45 Nm Technical data according to the manufacturer. Data and price: on request! We would be happy to provide you with a detailed offer! Note: Our offer is exclusively aimed at professional customers! (Subject to changes and errors in technical data, information, and prices, as well as prior sale!)

Condition: new, Stromab Matrix F Automatic Fully Programmable Cross Cutting & Notching Machine A heavy duty optimising upstroke crosscut and notching machine, designed for programmable and repetitive cutting and notching from standard and / or random lengths of timber. The saw unit has a pneumatic upstroke action with variable speed control, The notching unit is independent of the saw and therefore allows for programming of the saw or notching either as separate program's or as one single job. The pusher / feed is fitted with a heavy duty rack and pinion drive feeding system for fast positioning giving a high level of repeat cutting accuracy. The saw unit and clamping area is totally enclosed by a clear hinged electrically interlocked hood that while giving the operator a clear view of the cutting area still gives complete protection. The infeed and outfeed tables are of all steel construction meaning even heavy sections or packs of timber can be processed. For additional operator safety the rear of the pusher system is guarded, while there is a full length safety pull cord on the front infeed table. Programming and entering of cutting lists is very simple through a colour touch screen controller with graphic representation of the cut pieces. The machine offers full optimisation and also has the added optional facilities of defect cutting and remote programming from PC or laptop with transfer vis USB key or network. Additional options also include - extended outfeed table and label printing. To date we have supplied over 250 Matrix saws in to the UK, with a number of customers installing several machines. Saw unit Self braking saw motor 10hp Saw blade diameter 500mm Max cutting width 360mm ( refer to chart ) Max cutting height 135mm ( refer to chart ) Dust extraction 4 x 100mm diameter Milling Unit Self braking milling motor 5.5hp Pneumatic milling stroke with adjustable speed Max milling stroke 400mm Max milling width 100mm Max milling depth 60mm Dust extraction 2 x 125mm and 2 x 100mm Njdpfx Aqsdy Hrdjwoda Push feed system 3000 to 13000mm Precision rack and pinion drive to pusher with magnetic reading tape giving a high level of repeat cutting accuracy. Pneumatic rising of the pusher at the end of cutting cycle Piece length reading photocell Positioning speed 100m/min Positioning accuracy + /- 0.4mm Touch screen control unit Remote programming of cutting list via colour graphic touch screen controller - connection via USB key. - 6 optimising criteria - longest size, minimum waste, sequence, priority size, by volume or by value. - 1000 cutting lists - 10,000 lines per list. - Cutting list entered via controller key pad or via remote PC using PC or cable - Graphic description of the workpiece.

Condition: new, empty load weight: 5,500 kg, overall weight: 19,500 kg, axle configuration: 1 axle, loading space length: 11,800 mm, loading space width: 2,550 mm, loading space height: 1,100 mm, suspension: air, tire size: 215 75 17,5, Equipment: crane, KALEPAR TRAILER - KLP 119V2 TRUCK TRANSPORTER - 1x 9-ton SAF or BPW axle - 100% galvanized - Gross Vehicle Weight (GVW): 19,500 kg - Tare weight: approx. 5,500 kg - Wabco 2S-2M EBS braking system - Aspöck 24V electrical system - EU standard - Air suspension - Hydraulic cable winch Hammerwinch 8t with wireless remote control (tele-radio) - Hydraulic rear extension, full width 2550 mm and length 1500 mm - Length: 11,800 mm - Length with extension: 13,300 mm Ndsdskbyt Ijpfx Aqwsa - Width: 2,550 mm - Saddle height: approx. 1050 mm - 1150 mm (other saddle heights available) - Tire brand: Goodyear, Pirelli, or Continental, twin tires - Spare wheel with spare wheel holder - 24V 4.5 kW electric-hydraulic motor for cable winch, loading platform, and rear extension - Modifications possible according to customer requirements - Paint color can be freely chosen / free of charge - All documents COC, TÜV, etc. for registration are available. For more info: kalepar *The pictures are examples. Copyright cannot be claimed.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, overall weight: 1,106 kg, arm reach: 2,896 mm, We offer industrial robots from the manufacturer KUKA. The scope of delivery includes the robot arm, control cabinet and the associated cables. The robots come from a functioning system and have been professionally dismantled. We carry out a functional test and check the robots. Ndodpfx Aqorfx Ifswea If you are interested, we offer the opportunity to demonstrate the functions to ensure that they meet your requirements. We grant a 14-day right of return. Further warranty services are excluded. - Supplement at additional cost - We are pleased to be able to offer you a new function for our robots: The Siemens S7-1200 Profisafe safety controller. With this controller, you can easily integrate an emergency stop function, a safety gate and a start-stop connection via the Profisafebus. The controller is fully configured and programmed so that you can implement a simple stand-alone solution with a robot and a safety fence. If required, we can also offer you additional support during commissioning. We have an extensive stock of these robots and the prices quoted are package prices. Discounts are negotiable for larger order quantities. We invite you to contact us again to discuss further details. Sale exclusively to traders.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,200 kg, maximum load weight: 28,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,045 mm, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, slightly sloping outer frame, new design with Load-Lock profile for securing lashing straps, 24-ton capacity, two-stage landing gear, single-side operation, with straight lower section, without horizontal load compensation. Note: Free support leg swivel angle or free swivel radius to the rear approx. 1930 mm, extension ladder at the rear, door lock on the side, 2 wheel chocks with holder, Aluminum side impact protection, galvanized steel under-run protection, quarter panel fenders in front of and behind the axle assembly, with anti-splash flaps according to EG standard, rear impact protection. SAF disc brake axles with 430 mm disc diameter, axle/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension. Two-line compressed air brake system, color-coded lines for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic brake system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve, vehicle – driving stability system. 385/65R22.5, manufacturer's choice, steel rims, factory silver. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 2 x 7-pole tamper-proof sockets at the front, without connecting cable. Floor: Sieve-printed panels approx. 30 mm thick, mounted on longitudinal supports for high point load capacity for forklift axle loads up to a maximum of 7100 kg. Front wall/corner posts at the front: 2580 mm high, corner posts made of steel in a full-volume design, release device for side tarpaulin on the front wall, crash barrier, at the bottom inside at a height of approx. 140 mm with steel impact protection. Side supports: 3 pairs of sliding supports that can be moved along the entire length, with 4-fold insertion pockets and at the bottom with a long pocket, 3 pairs of support positions. Insertion slats: 5 rows of wooden insertion slats. Rear wall/corner posts at the rear: Corner posts made of steel at the rear up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal swivel latch locks each. Ndodpfx Aqji Riy Towea Tarpaulin: Tarpaulin with welded horizontal and vertical straps, tensioning closures made of stainless steel. Roof: Sliding roof, rear lift that can be folded up, with the roof that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams, approx. 2490 mm, tarpaulin color: white, 400 Roof non-elastic, minimal deflection of the roof beam during loading and unloading, optimal rain strip at the rear, at the top of the rear crossbar, above the doors. Germany, test approval according to EG 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural integrity according to EN 12642 XL, prepared for single-row license plate holder, warning sign according to ECE - 70, reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the co

Condition: new, functionality: fully functional, empty load weight: 4,780 kg, maximum load weight: 33,220 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container mounts: Rear extension retracted: 1 x 20 ft, flush at the rear, low saddle load Rear extension extended, 1st stage: 1 x 30 ft, 2 x 20 ft, 1 x 40 ft with gooseneck tunnel Rear extension extended, 2nd stage: 1 x 45 ft with short gooseneck tunnel and overload to the rear Rear extension extended, 2nd stage + front extension, 1st stage: Nodpfx Asi Rizusqwoda 1 x 45 ft with long gooseneck tunnel and angled corners with height adjustment at the rear and folding center supports for containers without a tunnel Container guide at the front, pluggable and removable Plug adapter for front locking, to lock containers without a tunnel from below, with holder when not in use Front extension on rollers, manually extendable (for 45 ft containers with long tunnels) Rear extension on rollers, with hand crank 24 ton, 2-speed support winch, single-sided operation 2 chock blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-spray flaps according to EG Rear impact protection Axles and Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport), up to 44 tons gross vehicle weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assistance, activated by 3x braking (start-up assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-Canbus signal, for display on the display in the driver's cab, the truck must be appropriately prepared Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front Operating Instructions Special permit required if the overall train length exceeds 16,500 mm. When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the overall train length of 16,500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Approval / Signage Germany Type approval according to EG 2007/46 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective tape

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,700 kg, maximum load weight: 33,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 9,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer specifications. Chassis, Saddle, and Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins and 2 kingpin positions Container receptacles: Rear extension retracted: 1 x 20 ft or 1 x 30 ft, flush at the rear Middle telescope, 1st stage, rear extension extended, 1st stage: 2 x 20 ft or 1 x 40 ft with and without gooseneck tunnel Middle telescope, 2nd stage, rear extension extended, 2nd stage: 1 x 45 ft with and without gooseneck tunnel, and with rear overload capability Middle telescope as a nested central tube frame with pin locking with height adjustment at the rear and foldable center supports for containers without a tunnel Container guides, front, pluggable and removable Plug-in adapter for front locking, to lock containers without a tunnel from below, with a holder when not in use Rear extension mounted on rollers, with hand crank 24 tons, 2-speed support jacks, single-sided operation Rear underrun protection, extendable for 45 ft containers Half-shell fenders with anti-splash flaps according to EG Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking System 2-line compressed air braking system Color-coded line routing for easy service Spring-loaded parking brake Tele Control Axle load adjustment for easy telescoping 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the instrument panel in the driver's cab; the truck must be prepared accordingly; no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, tail and brake lights in LED, yellow LED lighting on the sides (Note: certain tractor units may experience false diagnoses, even though the function is correct) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Operating Instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total length of the combination of 16500 mm will be exceeded! The rear underrun protection must be manually extended. An exemption permit according to § 70 StVZo is required! Country of Registration/ Signs Germany Type approval according to EG 2007/46 24/7 service hotline prepared for license plate holder, single-line Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Ndjdei Ri Exopfx Aqwja Paint Frame, front section + rear extension, hot-dip galvanized Rear section DB 7350 Novagrau - 10-year guarantee against rust-through or hot-dip galvanized - 15-year

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, Low-loader Semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without lateral support Foldable rear support 2 chock blocks with holder Aluminum side protection Fender fairings in front of and behind the axle assembly 1st pair of wheel recesses integrated into the gooseneck area in the low-bed section, angled for easy entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader models with detailed specifications (if the overall height is exceeded). Wheel recess cover, retractable from the main frame, with wood inserts. Extensions retractable to 3,000 mm (not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for timber planks on the gooseneck, across the front Timber planks, 70 mm, for extension to 3000 mm Tie-down points for low-loader 2 pairs of ring-type tie-down points, 5 tons each, at the front on the gooseneck 11 pairs of tie-down eyes integrated into the top and side of the outer frame, 10 tons each 2 x on the gooseneck, 9 x distributed in the low-loader area, first tie-down point 250 mm from the front and last max. 250 mm from the rear, spacing between tie-down points not greater than 1100 mm 8 pairs of stake pockets integrated into the outer frame, inner dimensions 70 x 40 mm, or, instead of stake pockets, 5-ton ring-type tie-down points embedded in the floor Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at the front, without connection cable 2 keyed coupling heads at the front With raise and lower valve Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab; truck must be suitably pre-equipped. Vehicle - Driving Stability System Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole keyed sockets at the front 1 x LED rotating beacon with holder, switched via side lights 2 pairs of warning signs, double LED illuminated and retractable to 3,000 mm, detachable with connector Floor Gooseneck with steel/non-slip steel plate Storage box integrated into the access slope to the gooseneck Then with 70 mm softwood floor, in the wheel recesses at the bottom and in the wheel well area, steel/non-slip steel plate Low-loader platform including rear slope, 9,100 mm Nodsi Ri Hcopfx Aqwsda Ramps Steel ramps, 2,800 mm long, 750 mm wide, side-shiftable Additional ramp securing at the bottom.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,300 kg, maximum load weight: 9,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Steel welded construction Turntable with robust ball bearing Foldable rear support 2 wheel chocks + holder Aluminum side underrun protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Excavator arm recess starting above the rear axles to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 storage box recessed in the gooseneck in the floor with a lid, W=720 mm/ L=520 mm / D= 170 mm 1st pair of wheel recesses recessed in the gooseneck in the low-loader wheel well area, sloped for access, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses between the axles recessed in the low-loader in the wheel well area, sloped for access, length at the bottom approx. 600, approx. 300 mm deep. Note! Frame in the main beam area is 300 mm higher than the wheel recess. Wheel recess cover pull-out from the main frame, with wood inserts. Distance from the outer frame, beam to beam, approx. 1280 mm Extensions pull-out to 3,000 mm, foldable at the wheel recess extensions (extension not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for wooden planks in the middle of the loading area or under the loading area, depending on technical feasibility Wooden planks 70 mm for extension to 3000 mm Lashing points, low-loader 1 pair of ring lashing points recessed at the front on the gooseneck, each 5 tons 8 pairs of lashing eyes at the top and on the side recessed in the outer frame, each 10 tons 2 x at the front on the gooseneck 6 x in the low-loader, the first lashing point 250 mm from the front and the last one max. 250 mm from the rear, the distance between the lashing points is no more than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each 5 tons (can be converted to stake pockets) Coupling system, trailer, turntable Drawbar with tested 50 mm drawbar eye with 8° inclined drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Air suspension with lifting and lowering valve, can be operated separately at the front and rear Wheels and tires 235/75R17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Ndjdpfx Aei Ri I Njqwsa Braking system 2-line compressed air brake system Spring-loaded parking brake Trailer Info Center for displaying vehicle data such as axle load (no calibrated scale) and odometer Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be suitably prepared, no truck installation (no calibrated scale) Vehicle-driving stability system Duomatic connection at the front, with connecting cable to the towing vehicle EBS, Electronic Braking System with EBS plug at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plat

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 13,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space width: 2,520 mm, loading space height: 380 mm, total length: 12,000 mm, total width: 2,550 mm, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Steel welded construction Turntable with robust ball bearing race, storage box recessed in the turntable extension Foldable rear support Chocks with holder Aluminum side impact protection Splash guard at the rear over the entire width Quarter panel fenders in front of the 1st axle Spare wheel holder for 1 spare wheel, with wheel fastening kit Spare wheel, same brand as the standard tires, steel rim Plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Tie-down points for low-loader 3 pairs of tie-down points, 10 tons each, integrated in the floor at the front 6 pairs of tie-down eyes recessed in the upper and side parts of the outer frame, 10 tons each 1 x at the neck area, the rest spaced out with a maximum distance of 1200 mm Ndodpfoi Ri Nxsx Aqwja 1 x rear slope 5 pairs of ring tie-down points recessed in the outer frame, 5 tons each (can be converted to stake pockets) Coupling device, trailer, turntable Drawbar with tested 40 mm drawbar eye Axles and Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting Wheels and Tires 235 / 75 R 17,5 According to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Voltage converter for 12/24 Volt operation Note! A 7-pin socket, 12 Volt, is required on the tractor/tow vehicle! (Required in conjunction with the voltage converter for electrical system!) Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white/red position lights at the rear 2 white position lights at the front Additional LED work lights at the rear, switched on via reversing light 2 x 7-pin fail-safe plugs at the front, with connecting cable 1 x 7-pin agricultural plug Voltage converter 12/24 Volt (only for electrical system, not for ABS/EBS) Floor Front area: steel floor Then with 70 mm softwood floor, steel/non-slip sheet metal covering in the wheel arch area Rear slope with 70 mm softwood floor Low-loader platform including rear slope 8,200 mm Loading Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Covered with wood With spring-assisted support Operating Instructions A special permit is required for an axle load of 10,000 kg. The permit must be applied for separately in each federal state; a guarantee for a 20-ton gross vehicle weight must not be given by the legislator. Customer risk. Country of Registration / Signs Country of registration: Germany With DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 Service Hotline Prepared for license plate holder, two-line Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau 10-year warranty against rust Drawbar galvanized or black, according to manufacturer's choice Loading ramps hot-dip galvanized Note: Archive images!

Condition: good (used), Balancer, machine balancer, spring balancer, cable extension, weight compensator Ndedjv U I S Sjpfx Aqwsa -Manufacturer: Tecna, spring balancer type 9312 -Load capacity: 1 - 2 kg -Rope length: 1600 mm -Number: 1x spring balancer available -Dimensions: 200/110/H55 mm -Own weight: 0.6 kg

Condition: new, mileage: 10 km, power: 103 kW (140.04 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 7, loading space length: 3,050 mm, loading space width: 2,010 mm, loading space height: 98 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, German new vehicle: * Not registered Ndedpfefq I A Sjx Aqwoa * Euro 6 * 6-speed gearbox * 7 seats * 90 L fuel tank * Total weight 3,500 kg * ABS + ESP * Driver airbag * Mirrors for body width of 2350 mm * Reinforced springs on the rear axle * Multifunction system with DAB radio and steering wheel controls * Central locking with remote control * Electric windows * Electric/heated exterior mirrors * Tow hitch with 3000 kg towing capacity Three-way tipper: * Substructure: Steel, hot-dip galvanized * Drive: Electro-hydraulic with cable remote control * Floor: Galvanized steel sheet * Aluminum side panels, 40 cm high, foldable * Leaf grid extension, 58 cm high, pivoting * Internal dimensions approx. L x W x H 305 x 201 x 98 cm Load securing also available from us: * Tension and lashing straps * Load bars * Warning vests * Transport boxes * Edge protectors * Stowage bags * Wheel chocks * etc. Financing and leasing possible We manufacture bodies in any size and on any chassis. Canvas, GRP sandwich, aluminum Visit us at: Bodies - Complete vehicles - Trailers - Advice - Financing Errors and prior sale excepted, no liability for printing and input errors.

Condition: used, maximum load weight: 34,250 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 04/2027, Equipment: ABS, Excerpt from Equipment List: 09010.001 Braking system in accordance with ECE-R13 09020.001 Electrical system in accordance with ECE-R48 09050.001 The Kögel superstructure guideline must be observed! It can be accessed at [URL removed]. Chassis 10110.020 Chassis frame made of high-quality steel, but without an outer frame. 10300.010 Coupling plate with a 2-inch fifth-wheel coupling pin according to DIN 74080 / ISO 337 11110.105 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended) b) 2 x 20' ISO containers (frame extended) c) 1 x 30' ISO container flush at the rear (frame extended) d) 1 x 20' ISO container flush at the rear (frame retracted) e) 1 x 20' ISO container in the middle (frame retracted). 15200.140 4 pairs of heavy-duty lashing rings 27850.030 Rear frame extension, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable. Length adjustable via 1 pneumatic cylinder, low-maintenance guide on special plastic slides and 2 extension rollers. Automatic pneumatic locking of the extension. Suspension I 17160.013 Axle lift mechanism on axle 1 I 17165.113 Axle lift control fully automatic, load-dependent. Start assist: activation via 3x brake, 30% overload up to a speed of 25 km/h. I 17170.010 Operation on the chassis via switch. Also possible from the cab (switch in the cab required - PIN 12). I 18330.210 Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, offset 120. Air suspension with approx. 180 mm suspension travel. Vehicle Tires 20540.170 Tires 6x 385/55 R 22.5, 160J (manufacturer of our choice) 20865.005 6 steel rims 22.5 x 11.75, offset 120 mm. Chassis Components 20110.010 Fifth wheel (manufacturer at Kögel's choice) mechanically with equalizing plate, 24 t lifting capacity. Single-sided operation on the right when driving forward. 21070.169 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular mudguards with spray flaps. 21300.001 2 chock blocks with holder Nedpfxozkx Hns Aqweda I 22070.020 Lateral protective device, according to ECE-R73, closed. 27510.050 Underrun protection made of square steel tube according to ECE-R58 with a lamp carrier arranged above, protected. 27511.010 Height of the underrun protection profile min. 120 mm, designed for increased test loads. Brake / Air Suspension System 32110.058 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS connection ISO 7638, (without connecting lines), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 connection. 33420.070 Air suspension system incl. 1 raising and lowering valve, mounted on the left side when driving forward in front of the axle unit. 34320.001 2 non-interchangeable coupling heads in front ISO 1728 34410.010 Air reservoirs for the brake system and air supply made of steel (EN 286-2). Rear Impact Guard 42551.040 Solid steel rear impact guard at the rear end beam. Electrical / Electronics 60500.021 Lamp carrier made of steel, arranged above the underrun protection. 61100.220 KÖGEL LUXIMA Premium Package, consisting of: - LED license plate lighting, LED position lights and reflectors in front - flashing LED side marker lights - Superseal and bayonet connectors for the lights I 61500.110 2 LED outline lights with arm, mounted on multi-chamber tail light I 61910.120 2 LED multi-chamber lights

Condition: used, maximum load weight: 35,750 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list. Complete equipment available upon request. Braking system according to ECE-R13 Electrical system according to ECE-R48 The Kögel superstructure guideline must be observed! It can be accessed at [website address] Frame Chassis frame made of high-quality steel, but without an outer frame Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337 With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended), b) 2 x 20' ISO containers (frame extended), c) 1 x 30' ISO container flush at the rear (frame extended), d) 1 x 20' ISO container flush at the rear (frame retracted), e) 1 x 20' ISO container in the middle (frame retracted) 4 pairs of heavy-duty lashing rings Frame extension at the rear, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable, adjustable in length via 1 pneumatic cylinder, low-maintenance guide on special plastic sliders and 2 extension rollers Automatic pneumatic locking of the extension Suspension Axle lift mechanism on axle 1 Control of the axle lift fully automatic, load-dependent Starting aid: activation via 3x brake, 30%, overload up to a speed of 25 km/h Operation on the chassis via switch, also possible from the driver's cab (switch in the cab required - PIN 12) Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, ET 120 Air suspension with approx. 180 mm travel Vehicle tires Tires 6-fold 385/55 R 22.5, 160J 6 steel rims 22.5 x 11.75, offset 120 mm (ET 120) Chassis components Nsdpfszkx Ifox Aqweda Landing gear, mechanical with leveling foot, 24 t lifting capacity, single-sided operation on the right-hand side while driving Spray protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires, consisting of: 3 pairs of semi-circular fenders with spray flaps 2 chock blocks with bracket Lateral protection device, according to ECE-R73, closed Underrun protection made of square steel tube according to ECE-R58 with a light carrier arranged above, protected Height of the underrun protection profile min. 120 mm, designed for increased test forces Brake / Air suspension system EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connection cables), parking brake as spring brake, external pneumatic connections and external EBS diagnostic connection via ISO 7638 plug connection Air suspension system incl. 1 raising and lowering valve, mounted on the left-hand side in the direction of travel in front of the axle unit 2 non-interchangeable coupling heads at the front ISO 1728 Air tanks for braking system and air supply made of steel (EN 286-2) Rear impact guard Solid steel rear impact guard on the rear end cross member Electrical system / Electronics Light carrier made of steel, arranged above the underrun protection KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED side marker lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the lights 2 LED outline lights with arm, mounted on multi-chamber tail light 2 LED multi-chamber tail lights (without LCG) Plug connection at the front, 15-pole ISO 12098 (without connection cables) Corresponds to vehicle class FL, AT Information systems Kögel Telematics System BasicTrailer incl. location monitoring, coupling status, EBS data The monthly fees are regulated in a separate contract Signage Orange

Condition: refurbished (used), Year of construction: 2022, machine/vehicle number: R-00609, load capacity: 210 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB Plus A-size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/210F manufactured in 2022.08. The robot comes with an R-30iB Plus A-size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Ndodozlk Efepfx Aqwea Brand: FANUC  Model: R-2000iC/210F Model Number: A05B-1333-B205 Year of Manufacture Robot: 2022.08 Warranty term (months): 12   Payload (kg): 210 Reach (mm): 2655 Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1090   Controller: R-30iB Plus A-size Year of Manufacture Cabinet: 2022.08 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: refurbished (used), Year of construction: 2012, machine/vehicle number: R-00600, load capacity: 125 kg, arm reach: 3,005 mm, controller manufacturer: R-30iA B-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC R-2000iB/125L manufactured in 2012.07. The robot comes with an R-30iA B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: R-2000iB/125L Model Number: A05B-1329-B261 Year of Manufacture Robot: 2012.07 Warranty term (months): 12   Nsdjzlk Exjpfx Aqwsda Payload (kg): 125 Reach (mm): 3005 Repeatability (mm): ± 0.2 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1190   Controller: R-30iA B-Size Year of Manufacture Cabinet: 2012.06 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10    

Condition: excellent (used), Year of construction: 2010, operating hours: 32,300 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Ndjdpfx Ajziu Hzjqwoa Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome

Year of construction: 1995, condition: good (used), Balancer, machine balancer, spring balancer, cable extension, weight compensator, winder -Manufacturer: Fein, Balancer Spring Balancer -Load capacity: 10-14 kg -Order No.: 90801029002 -Quantity: 1x spring balance available -Dimensions: 310/190/135 mm -Weight: 4 kg Ndsdpfx Aszhuglsqwea

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 24,400 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 5,900 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,290 mm, total width: 2,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are customised to customer requirements. #Low Loader Drawbar Trailer Chassis Welded steel construction Turntable with heavy-duty ball race Folding rear support legs Wheel chocks with holders Full-width rear mudflap 1 plastic toolbox Preparation for extensions to 3,000 mm (holes in outer frame with covers, not in rear bevel) #Lashing Points Low Loader Nodeznyrmjpfx Aqweda 1 pair of recessed 10 t lashing cut-outs in front gooseneck side members 7 pairs of recessed 10 t lashing points in top and side outer frame 1 on front gooseneck 5 in low bed 1 in rear bevel 12 pairs of 5 t lashing holes in outer frame (for load straps) 5 on gooseneck, 6 in low bed and 1 in rear bevel #Drawbar Equipment Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles + Suspension Drum brake axles, manufacturer's choice "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushes and mechanical axle load equaliser #Wheels and Tyres 235/75 R17.5 Manufacturer's choice Twin steel wheels, factory silver #Braking System Twin-line air brake system Spring parking brake 2 non-interchangeable front coupling heads with connecting lines to towing vehicle Connecting lines extended by approx. 60 cm Without ABS, with mechanical ALB, max. 60 km/h approval #Electrical System 12 V multi-chamber lights, without yellow side LED lights, with side reflectors 2 front white position lights 2 rear white/red outline marker lights 1 x 7-pin 12 V front plug with connecting cable, extended by approx. 60 cm 1 removable LED beacon with bracket, switched via side lights #Floor Front gooseneck with steel chequer plate Recessed storage box in transition to gooseneck 70 mm softwood floor, steel chequer plate in wheel arch area Rear bevel with 70 mm softwood floor Low loader deck incl. rear bevel: 5,900 mm #Loading Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber-covered (steel chequer plate at ramp tips) Hydraulic operation via PTO with flow control, left-hand side operation in direction of travel Hydraulic connection with SVK plug NW 10/3 incl. connecting hose #Registration / Plates Registration country: Germany With DEKRA inspection and approval report for max. 60 km/h registration, agricultural towing vehicle Prepared for two-line number plate holder Without contour marking / reflective strips according to ECE R 048 #Paint Finish Chassis hot-dip galvanised incl. passivation "15 Jahre Gewährleistung gegen Durchrostung" Drawbar galvanised or black, manufacturer's choice Loading ramps hot-dip galvanised

Condition: new, Year of construction: 2023, Storage number: 100518723 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Equipment: Hook height 21m Nodpfx Aezkztqjqwsda Outreach 33m Color: yellow and gray in the new Liebherr design Includes counterweight: 9 plates, each weighing 1530kg Includes slew and trolley travel limiters Includes rear axle adapter Includes transformer, 1.5 kVA Extension cable Location: Passau