Used Die Magnetprofis Pem1200 for sale (4,147)

Condition: new, functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW Isdpforg Ebcox Amioau - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off - Control system

Year of construction: 2005, condition: like new (used), functionality: fully functional, machine/vehicle number: 053801204, Machine is meticulously maintained Has been operating in a greeting cards factory Comes with centre line system 2 x die cut chases 1 x embossing honeycomb if required Can be demonstrated on location, London Area, UK Available immediately Ijdpfxsyrnhxj Amijau

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Iaodpfeyilgdex Amisu Gun Drill Speed Range 0-14,000 RPM Max. drill Ø steel 1.5 - 10 mm Drilling depth 350 mm Table load 1600 Speeds / ranges 14000 Rpm Dimensions (Estimate) Length 4500 mm Width 4500 mm Height 2300 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 73, travel distance X-axis: 400 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 3,000 kg, input frequency: 50 Hz, input current: 12 A, Equipment: documentation/manual, We are offering this well-maintained AGIE HYPERSPARK 2 EXACT die-sinking EDM machine, year of manufacture 2004. Iodpfx Amoy Hfavjieau Model: HYPERSPARK 2 EXACT Installation serial number: 73 Serial number: 30.303 Year of manufacture: 2004 Power consumption: 628.702 Weight: 3,000 kg Voltage: 3 × 400 V Frequency: 50 Hz Power: 8.3 kVA Rated current: 12 A Short-circuit current: 10 kA 20-position automatic tool changer If you have any questions or require further information, please feel free to send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2016, X-axis: 1,000 mm Y-axis: 1,510 mm Z-axis: 700 mm Max. workpiece dimensions: 1,770 x 1,270 x 650 mm Max. workpiece weight: 7,500 kg Connected load: 22 kVA Machine weight: 12,500 kg Includes multi-change electrode changer, 142 positions. Includes documentation. Iaedpfx Aozcpltsmiju Machine is available immediately and can be inspected while powered on!

Condition: ready for operation (used), Available directly from our warehouse in Son; heavy stamping die with electric coupling, electrical system completely renewed around 2019, original year of manufacture 1973; mechanically completely overhauled in 2015, moving die resurfaced, die and gear pins replaced with new pins with significantly higher mechanical strength than the originals, as well as the bronze bearings now made from material grade 2.1061 DIN 1705; this material is extremely wear-resistant with the addition of Pb (lead) for improved performance and good emergency running properties (i.e., no lubrication required), stamping plate 144 x 104 cm, thickness 5mm. Electrically upgraded with PILZ safety relays for each channel, motorized clamping of the stamping die. Safety bars have been extended and made more robust compared to the original design, 350 tons of pressure. Iaodoxz Niujpfx Amiju

Condition: good (used), Iijima’s excellent, high-speed JF-1030, manufactured in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting unit adapted to be compatible with/for Bobst die-cutting blades and mounting strips. Sector segment driven by a dual set of bevel gears instead of the previous triple system. Smoother and vibration-free, improved operation of the gripper carriages. Chains renewed in May 2023. Gripper carriages have been repaired where necessary, but not replaced; current tolerance on front registration for rigid cardboard types < 0.15 mm. Engagement clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all rolling bearings on this shaft, including those in the oil casing just before and after the worm gear. Oil seals replaced. Oil casings flushed and thoroughly cleaned in preparation for conversion from mineral oil to full synthetic oil. Absolutely no foaming, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be supplied including installation, transport, and warranty. Other specifications as per the factory brochure. Technical Specifications – Flatbed Die Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout ⸻ Sheet Sizes & Formats Iaedpfsx Ndu Djx Amiju • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm ⸻ Performance • Maximum cutting pressure: when running max. sheet size • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable • Normal cutting rule height: 8 – 12 mm ⸻ Pile Data Feeder pile • Height (incl. pallet): 1,200 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,080 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm • Delivery auxiliary pile weight: 800 kg ⸻ Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg ⸻ Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min ⸻ Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: M14L/8034, Offer Number: M14L/8034 Machinetype: thread rolling machine - flat die Iasdpfx Aewi Tc Rsmiou Info: vibratory feeder Make: HILGELAND Type: TR6V Constr. year: 1970 diameter range: 10-20 mm shaft length under head: 16-180 mm max. thread length: 105 mm output pieces/min: 100 Location: In our warehouse

Year of construction: 1991, condition: ready for operation (used), Travel X/Y/Z: 380mm/280mm/300mm, working dimensions X/Y/Z: 580mm/450mm/340mm, max. electrode weight: 50kg. Machine dimensions X/Y/Z: approx. 2100mm/1650mm/1750mm, weight: approx. 3500kg. An on-site inspection is possible. Iodpfxozb Nlwj Amisau

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: M08L/8716, Offer Number: M08L/8716 Machinetype: 7 die - 7 blow warm forming header Info: bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer Make: NATIONAL FORMAX PLUS Type: FXP57S WF Constr. year: 2016 diameter range: 8,5-22 mm number of dies: 7 number of stations: 8 cutting length: 4-67 mm shaft length under head: 4-75 mm output - pieces/min: 175 Iasdpfx Aewi Suljmiou press power: 200(126) to max. outside dia. of round pie: 42 mm stroke: 150 mm Location: In our warehouse

Condition: used, mileage: 476,043 km, power: 375 kW (509.86 HP), first registration: 09/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, Safety package Light and Sight Plus, Safety package Advanced, MAN EasyStart immobilizer, emergency brake signal automatic hazard warning light activation, electric glass sunroof, ASR, ESP, ACC Stop and Go cruise control with distance control, LRA lane keeping assistant, rear view camera, fire extinguisher 2kg, MAN Mediasystem Navigation Advanced 7'', navigation map Europe and Russia, MAN Attention Guard, fifth wheel coupling JOST JSK 42 K0 2, 150 mm height, 575 mm fifth wheel lead Iodpfx Amol Ezn Usijau

Condition: like new (used), Year of construction: 2014, AGIECHARMILLES FORM 300 wire erosion machine, manufactured in 2014. Travel: X 600, Y 400, Z 450 Table size: 750 x 600 mm. Working tank dimensions: 1,220 x 870 x 470 mm. Linear guides. Maximum workpiece weight: 1,600 kg. ISPG 80 A generator. EROWA ITS head. C-axis. Iaedezd D Nhopfx Amiju 6-electrode changer. Dielectric fluid tank: 700 liters. Filtration system with 6 paper cartridges.

Year of construction: 2022, condition: new, Pressure: 400 t table length: 3000 mm table width: 2000 mm table load max .: 50 t distance between the work tables : min. 400 / max. 2800 mm top tool foldable: 180 degrees Dimensions L x W x H: 7600 × 5670 × 7850 mm Iedpsfn Efpefx Amijau Total weight (without operating materials): 85 t Motor power: 44 kW

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Isdjwbvmiepfx Amijau Very good condition

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Iedjhmmfkopfx Amieau Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, Year of construction: 2004, Sinker EDM machine Manufacturer: Exeron Type: 312 Year of manufacture: 2004 Control system: MF10 Travel ranges X/Y/Z: 450 x 300 x 300 mm Work table: 820 x 400 mm Working tank: 900 x 520 mm Distance table / quill: 150 / 450 mm Electrode weight max.: 30 / 150 kg Workpiece weight max.: 800 kg Filling level of working tank: 300 mm 20-position tool changer Isdeytrz Sepfx Amisau Generator current: 60 A Power connection: 400 V Three-phase current: 50 Hz Power consumption: 8 kVA Overall dimensions W/D/H approx.: 1,910 x 1,798 x 2,300 mm 3626

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Ijdpfxjza E Rme Amijau

Condition: excellent (used), mileage: 1,088,000 km, power: 345 kW (469.07 HP), first registration: 06/2014, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 1,000 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2014, Equipment: ABS, AdBlue, air conditioning, cruise control, differential lock, electric window regulation, parking heater, power mirror, retarder, seat heater, spoiler, traction control, = Additional Options and Equipment = - 2 bunks - Aluminum fuel tank - Heated mirrors - Driver comfort seats - Roof spoiler - Differential lock - Differential lock - Speed limiter - Air conditioning - Refrigerator under bed - Air horns on cab roof - Multifunction steering wheel - Radio/CD player - Sleeper cab - Sun visor - Auxiliary heater (parking heater) - ZF intarder = Remarks = NICE & CLEAN CONDITION RENAULT T460 HIGH-ROOF 4x2 TRACTOR UNIT WITH I-SHIFT, RETARDER, 2x DIESEL TANKS & AIR CONDITIONING!! 460HP, EURO 6!! AUTOMATIC GEARBOX!! RETARDER!! COMPLETE SPOILER SET ON CABIN!! AIR CONDITIONING!! PARKING AIR CONDITIONING!! FRIDGE UNDER BED!! ETC!! NICE, CLEAN & GOOD DRIVING TRACTOR UNIT, READY FOR HEAVY TRANSPORT JOBS!! MORE RENAULT 4x2 / 6x2 / 6x4 / 8x2 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS AVAILABLE)!! Iaedpjy Ru Ukjfx Amiju SHIPMENT, TRANSIT REGISTRATION, LOADING, STACKING OR TRANSPORT?? NO PROBLEM FOR US, WE ARE AN "ONE STOP SHOP" COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 10,837 cc Transmission Gearbox: I-SHIFT AUTOMATIC, 12-speed automatic Axle Configuration Tyre size: 315/80R22.5 Brakes: Disc brakes Front axle: Max. axle load: 7,500 kg; Steering; Left tyre tread: 30%; Right tyre tread: 30%; Suspension: Leaf suspension Rear axle: Dual wheel; Differential lock; Max. axle load: 11,500 kg; Left inner tyre tread: 20%; Left outer tyre tread: 20%; Right inner tyre tread: 20%; Right outer tyre tread: 20%; Reduction: simple reduction; Suspension: Air suspension Weights Curb weight: 5,990 kg Payload: 13,010 kg Gross vehicle weight: 19,000 kg Functional Loading platform height: 115 cm Condition Technical condition: Very good Optical condition: Very good Further Information Contact our Sales Department for further details.

Condition: good (used), Year of construction: 1962, functionality: fully functional, machine/vehicle number: 21860, Cylinder Die-Cutter Ijdpfx Amjxltnpjioau Heidelberg SBG 56x77 Serial Number 21860

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Non Stop Feeder & Delivery Center Line System: for Quick Job Changeover Working Hours: 1500h Iaodpfxowr T Aij Amisu

Year of construction: 2019, condition: good (used), functionality: fully functional, Die cutting, embossing and finishing machine Kama ProCut 76 with CPX Station Iasdpjxzvamjfx Amieu still in production available immediately Sheet size, max. 760 x 600 mm Die cutting size, max. 743 x 585 mm Sheet format, min. 279 x 210 mm Cutting force max. 180 t Gripper margin die cutting 10 mm Speed* 5 500 sheets/h

Condition: excellent (used), Year of construction: 2016, Bobst Novacut 106 ER Iajdezb Uymjpfx Amiou Year 2016

Year of construction: 1997, operating hours: 27,000 h, condition: excellent (used), Bobst SP 130-SER in very good condition, available due to business closure. Max. sheet size: 130 x 92 cm Min. sheet size: 58 x 54 cm Cutting force: 500 tons Iedpfx Asy S A Hwemisau Speed: 6,500 sheets/hour Operating hours: 27,000 hours For any further inquiries, please contact us via email or WhatsApp.

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Downstroke bending machine with 4-axis CNC control Iedpfx Amsxpqy Doijau Serial No. MK 285 Year of manufacture: 1998 CNC control SAFAN software version 5.07 TS1 Press force: 500 kN (50 tons) Working length: 2550 mm Stroke: 215 mm Clearance between side frames: 2700 mm Tool installation height: max. 414 mm Table width: 55 mm Table height above floor: 950 mm Approach speed: approx. 75 mm/s Return speed: approx. 75 mm/s Working speed: approx. 1.6 to 15 mm/s Motor power: 9 kW Power supply: 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN software version 5.07 TS1, Y1 and Y2 axis for ram - 2-axis backgauge, X-axis (backgauge depth adjustment), R-axis (backgauge height adjustment) - 2 backgauge fingers, laterally adjustable by hand (Z1, Z2) - Ram drive via 2 servomotors and belt drive - Working speed steplessly adjustable - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for the upper tool (UKB system, type 50.571, UKB System A) - Tool holder for lower tool, 55 mm wide with 13 mm groove, 21 mm groove depth (Trumpf system or UKB System B) - Supplied without bending tools (a new set from UKB costs approx. 3,600 EUR net) - Displayed total operating hours = 8,120 h - Number of working strokes: 1,049,789 strokes Space requirements (L x W x H): 3450 x 1850 x 2650 mm Weight: 5,000 kg Good condition

Condition: used, Year of construction: 2001, Rotary die-cutting machine, model BRS-320-D20-U800, with accessories Production direction: right to left Strip infeed basket with strip guide Driven feed, lower roller driven Upper roller adjustable manually Internal lateral strip guides 2 rotary die-cutting heads, quick-change system, many adjustment options 4 rotary die-cutting stations, for changing Strip outfeed basket Scrap conveyor Wheel displacement for transferring material from the machine line to rollers Iaedpfx Amoy Szlxeieu Protective covers with safety interlocks Includes die-cutting tools Includes control system and operator panel Includes electrical documentation Includes original documentation All plug connections use Harting connectors This machine was used to punch C-rails and DIN rails from 2-3 mm sheet metal. It operated flawlessly in production at the customer's plant until it was dismantled. We can provide support for integrating the machine into an existing profiling system or other applications.