Used Deep Cultivator for sale (1,231)

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Bedpfx Akjw E H E Reqedd Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º Bodpfx Akewh Rp Eoqedd - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, drilling depth: 1,600 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 2,100 mm, feed length Z-axis: 1,500 mm, overall weight: 50,000 kg, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,500 rpm, drill diameter: 40 mm, table length: 2,100 mm, table width: 1,900 mm, CNC Heidenhain iTNC 640 AXES OF MOVEMENT Maximum drilling depth in a single operation (V axis): mm 1,600 Table travel, horizontal movement (X axis): mm 3,000 Vertical movement (Y axis): mm 2,100 Column approach movement (milling) (Z axis): mm 1,500 Drilling slide tilting (resolution 0.001°) (A axis): +30° / -15° Table rotation (resolution 0.001°) (B axis): 360° Max axis feed rate: mm/min 10,000 Bodpfx Ajywnr Njkqjdd DEEP HOLE DRILLING AND MILLING SPINDLE – ISO 50 Solid drilling capacity: mm 5 – 25 Maximum drilling diameter: mm 40 Adjustable spindle speed: rpm 1 – 4,500 Spindle power S1: kW 17 Spindle torque: Nm 324 Standard drilling tool holder: mm Ø 25 x 70 Maximum internal spindle pressure: bar 120 Taper type: ISO 50 DIN 69871/A Coolant system: Yes ROTARY TABLE Rotary table dimensions: mm 1,900 x 2,100 Table rotation (resolution 0.001°) (B axis): 360° Table load capacity in rotation: kg 20,000 T-slots: mm 22 OIL SYSTEM Hydraulic pump motor power: kW 4 – 7.5 Self-regulated oil pressure: bar 15 – 120 Self-regulated oil flow rate: l/min 5 – 80 Oil tank capacity: L 800 – 1,000 Cooled oil temperature: 25 – 32 °C Filtration grade: micron 16 MACHINE DIMENSIONS AND WEIGHT Width x Length x Height: mm 7,000 x 7,900 x4,700h Machine weight: kg 50,000 DRILLING CAPABILITIES WITH GUN DRILLS Maximum depth: mm 1,600 Maximum rotation speed: rpm 4,500 Minimum drilling diameter: mm 6 Maximum drilling diameter: mm 40 THREADING HEAD “IMSASISTEM” WORKING FEATURES Max rotation speed: rpm 4,500 Maximum threading on C40 steel: M36 Machine equipped with: • Remote electronic handwheel Heidenhain • ISO 50 tool changer magazine with 40 positions • Fume extraction system 4,000 m³/hour • Through-spindle air/oil system • M24 threads on table side • Various tools and equipment • Tool rack with assorted gun drills • User and maintenance manual and CE declaration of conformity

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, drilling depth: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,300 mm, rotational speed (max.): 5,600 rpm, TECHNICAL DETAILS Drilling Data Drilling depth: 1,500 mm Axis Data X-axis travel: 3,000 mm Y-axis travel: 1,200 mm Z-axis travel: 1,300 mm X-axis feed rate: 15 m/min Y-axis feed rate: 15 m/min Z-axis feed rate: 15 m/min Feed force: 30,000 N Rapid traverse speed: 15 m/min Spindle Data Speed: min. 300 rpm Speed: max. 5,600 rpm Table Data Clamping surface: 2,000 mm x 1,250 mm Number of T-slots: 7 Table load capacity: 12,000 kg Tool holder: SK50 MACHINE DETAILS Control: TNC430 Bsdpfx Akow Izr Aeqjdd Dimensions & Weight Dimensions (L x W x H): 8,400 x 8,300 x 4,500 mm Total weight: 30,000 kg EQUIPMENT Stepless speed adjustment Drill bit grinding machine Note: Dismantling and loading can be offered for €8,000.

Condition: ready for operation (used), -Drill diameter: 5~25 mm -Drilling depth: 1000 mm Bdjdedgpltepfx Akqod -Tailstock -Tank -Pump -Filter

Condition: good (used), Year of construction: 1979, TBT T30-4-750/1000 -Drill diameter ~30 Bjdpfxod Ri H Es Akqsdd -Drilling depth 750 / Extension ~1000 -Tank -Pumps -Loading device -Tailstock

Condition: reconditioned (used), -Drill diameter: 5~25 mm -Drilling depth: 1500 mm -Tailstock Bdsdpfx Akjhuil Roqod -Tank -Pump -Filter

Condition: good (used), - Drilling diameter: 5-30 mm - Drilling depth: 750~900 mm Bdedpj Dcz Dofx Akqjd - Modifications according to customer requirements

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 6207 20.57, workpiece weight (max.): 3,000 kg, spindle speed (max.): 4,000 rpm, table length: 1,675 mm, table width: 700 mm, quill travel distance: 1,000 mm, TECHNICAL DETAILS Travel Paths and Drilling Motion Quill travel z: 1,000 mm Vertical drilling unit: 800 mm Traveling column in drilling direction w: 1,100 mm Table and Axes Table transverse travel x: 1,000 mm Table size: 1,675 x 700 mm Table load capacity: 3,000 kg Spindle and Machining Tool holder: SK40 Spindle speed: 100 to 4,000 rpm Drilling capacity in steel: 32 mm Thread cutting: M24 MACHINE DETAILS Bedpfew Elrvjx Akqsdd Power connection: 7.5 kW Dimensions & Weight Weight: 4.8 t Footprint: 3,500 x 6,000 x 2,400 mm Transport dimensions without enclosure: 2,400 x 6,000 x 2,400 mm

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling depth: 600 mm, rotational speed (max.): 6,000 rpm, center height: 250 mm, controller model: SIEMENS Sinumerik 840 D, workpiece diameter (max.): 25 mm, No reserve price – guaranteed sale to the highest bidder! The machine has been completely overhauled! TECHNICAL DETAILS Working depth: 600 mm Working diameter: 4 – 25 mm Number of spindles: 2 Centre height: 250 mm Centre distance: 203.2 mm Speed range: 1,000 – 6,000 rpm Feed rate: 0 – 300 mm/min Rapid traverse: 6,000 mm/min MACHINE DETAILS Control system: SIEMENS Sinumerik 840 D (Retrofit) Drilling system: Single-lip deep hole drilling Bdodjxpvbtepfx Akqsd Main drive: 2 x 5.5 kW EQUIPMENT - Single functions for machine setup - Semi-automatic operation for manual loading - Robust spindle carriage - Machine monitoring with spindle speed display - Table plate in special cast design - Safety guard with sliding door - Machine bed with hardened and ground linear guides - Internal coolant supply through drilling spindle - Electrical equipment according to IEC standards - Separate control cabinet with safety devices - Control panel in working area

Condition: excellent (used), functionality: fully functional, drilling depth: 1,000 mm, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, travel distance Z-axis: 360 mm, spindle speed (max.): 4,200 rpm, drill diameter: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, spindle motor power: 10,000 W, table length: 700 mm, table width: 1,400 mm, table load: 4,000 kg, feed length W-axis: 500 mm, Selca S4040D CNC Control Drilling depth, transverse movement V axis: 1,000 mm Column, longitudinal movement X axis: 1,650 mm Bdodpsxpwf Tefx Akqed Drilling slide, vertical movement Y axis: 1,000 mm Drilling slide, workpiece support movement W axis: 500 mm Drilling slide, maximum vertical "swivel" - A axis: +20° / –20° Rapid traverse, adjustable speed up to 10,000 mm/min Drilling diameter in solid material min/max: 5 – 40 mm Drilling spindle, rotational speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 10 kW Fixed clamping table, dimensions: 700 x 1,400 mm Standard clamping slots: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill holder; shank for drills > 6 mm: 10 x 40 mm Gun drill holder; shank for drills < 6 mm: 25 x 70 mm Clamping table ROTARY & "BARRASENO" axis B Dimensions mm: 800 x 1,000 Standard clamping slots: 18 mm Maximum axial load (rotary): 4,000 kg Continuous rotary axis B resolution: 360,000 steps/rev Maximum vertical resolution "BARRASENO" axis B1: +20° / –20° Small milling head – threading, etc. Maximum horizontal working stroke Z axis (830): 360 mm Spindle speed, adjustable up to 2,200 rpm Threading spindle motor power: 10 kW ISO40 tool changer with 10 rotary-translating stations USED MACHINE

Condition: refurbished (used), Year of construction: 2019, TECHNICAL DETAILS Drilling depth: 1,400 mm Full drilling range: 40 mm Spindle speed: 670 - 3,560 rpm Center height over bed: 380 mm Center height over floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2 x 400 mm Center height over table: 250 – 600 mm Z-axis Feed rate: 0-7,000 mm/min W-axis - 400 mm Feed rate: 0-7,000 mm/min X-axis - 800 mm Feed rate: 0-2,000 mm/min Y-axis - 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor nominal speed: 8,000 rpm Motor rated output: 18.5 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Weight: 8 t EQUIPMENT Manufacturer: Siemens Sinumerik 840 Dsl Including 1,700 l coolant system 20 solid carbide single-lip drills, diameters 6 mm to 20 mm, lengths 1,200 mm to 1,750 mm Bdsdjw Ekfuspfx Akqed

Condition: new, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15VWL1032, The machine includes fixtures for the production of electrical couplings in the following range: 250 - 800 mm SDR11 355 - 1200 mm SDR17 900 - 1200 mm SDR26 Original MSA drawings are also included. Bdsdpju Itk Rofx Akqsd The VWL 1200 is a CNC controlled vertical three-axis electric pipe laying machine designed for laying medium to large fittings or pipes. The machine can produce fittings typically in the 250 to 1400 mm internal diameter range (1400 mm SDR17). An optional 2-axis CNC drilling unit is available for drilling fusion indicators during the wire laying cycle or for drilling end holes during the external profiling cycle. The VWL 1200 uses special fixtures that clamp onto an innovative feature that is integral to the coupling design, so that there is a separate fusion zone in each half of the coupling. The process of laying the wire starts at one clamp at the end of the coupling. The wire is inserted with twice the required pitch at the end of the fusion zone, whereupon the tool system rotates and then moves in the opposite direction between the first laid pitch until it reaches the resting position at the second clamp. The process is completed at the second part of the coupling. The VWL 1200 system is designed to allow the loading and unloading of larger couplings (which can weigh up to approximately 300 kg even before the wire is inserted). The machine has a completely open top, which allows easy loading overhead using a gantry system. Alternatively, parts can be loaded through the extra wide operator's door using suitable gripping and handling equipment.

Condition: used, Year of construction: 1974, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 8002/6410, drilling depth: 1,000 mm, drill diameter: 30 mm, type of input current: three-phase, spindle motor power: 21 W, table length: 1,000 mm, input voltage: 550 V, mount diameter: 160 mm, number of spindles: 1, drilling capacity: 1,000 mm, quill diameter: 30 mm, Equipment: rotational speed infinitely variable, Deep hole drilling machine for up to 1000 mm and 30 mm diameter, used for drilling aluminium, regularly serviced, includes a significant quantity of drills. Machine is fully operational and in continuous use. Siemens control, Simatic PANEL, documentation available. Bedpfx Akjx Ehg Tjqsdd

Condition: new, TECHNICIAL SPECIFICATIONS: It can be manufactured from 304ss or 316ss Stainless material in accordance with the preferred surface treatment. The tank side walls are insulated with 50mm glass wool. The tanks that require heating can be produced with serpentine or electric heating. Temperature control is done digitally and follow-up is provided. If necessary, an air mixing device is added to the tanks. In the tanks, stainless ball type valves are used for discharge. WORKING PRINCIPLE: It is based on the principle of surface cleaning and processing by taking the material to be surface cleaned into the baskets as a general application and immersing it in tanks with chemical and / or water by means of a crane and waiting for a while. The aim is to clean the existing oil layer on the metal surface and create a thin film on the metal surface, thereby making the material more conducive to paint and more resistant to external factors. APPLICATION AREAS AND ADVANTAGES: Bdedefw N Rtspfx Akqsd Automotive sector, White goods sector, Lighting sector and General machinery manufacturing sector are facilities that do not require continuous production or provide high and equal quality with less labor in facilities where alternative solutions are not available due to the shape and size of the material or very high capacities are not reached. Chemical values ​​and temperature values ​​can be monitored and controlled by applying automation optionally. APPLICATION: Immersion type surface cleaning applications vary according to preference and required strengths for each sector. As two main applications show: - iron phosphate surface treatment - zinc phosphate surface treatment Apart from these, only applications for cleaning and oil removal can be made. There is an option additional to the immersion tank: * a drying oven * 2 stainless steel baskets DRYING OVEN: Generally, the working principle of drying ovens, which is the last step of immersion type surface cleaning units, is like BOX type ovens, however, in order to be suitable for immersion type surface cleaning facility, the parts of the lid are designed on the top side of the oven and the surface cleaning parts are dried in the same basket. In this type of drying system, the parts enter the drying oven and are ready for paint application after drying.

Condition: used, Year of construction: 1997, machine/vehicle number: 219, table length: 1,750 mm, table width: 700 mm, input voltage: 400 V, Degen UTB 600 E deep-drilling machine with a separate control cabinet and work table with T-slots. Specifications: Bedpfx Ajzgg Ixekqjdd Brand: Degen (Willy Degen) Type: UTB 600 E Machine No.: 219 Year of construction: 1997 Electrical data: 400 V, 50 Hz, 19 A, 11.2 kVA Table dimensions: 175 x 70 cm Note: Made in Germany Design: Machine with bed/table, column with bellows guard, separate control cabinet Condition: Used

Condition: excellent (used), Year of construction: 2013, 4mm Dia. - 16mm Dia Range of Drilling; Up to 3,000mm Length of Component; Double Axis; Overall Length Approx 11 Metres x 900mm Wide, (2) Sections - Headstock Bed Length Approx 5 Metres, Drilling Length Bed Approx 6 Metres; (1) 500mm Dia 4-Jaw Chuck, 120mm Bore with Troyke DL-20-B, 4th Axis, 500mm Dia. Precision Rotary Table; Pendant Control; Stand Alone Electrical Cabinet (Dimensions Approx 3,000mm x 500mm x 1,900mm High); Technidrill Coolant Filtration System consisting of LNS 'Turbo HB' Swarf Conveyor, FSI 'CBFP 11' Filter System & Oil Tank with High Pressure Delivery Pumps; Bjdpfsy Ey E Rox Akqsdd Stand Alone Dimplex Koolant Koolers Chiller Unit with Controls (Dimensions Approx 700mm x 1,300mm x 1,850mm High, 2012);

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract. Bsdpfx Aket Hw Ayeqjdd

Condition: used, Year of construction: 1985, core drilling diameter max. 18 mm bore depth 320 mm swing diameter mm Bdedpfx Aet Hwvaokqjd total power requirement 33 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: used, Year of construction: 1965, core drilling diameter max. 50 mm bore depth 2000 mm swing diameter mm drilling capacity diameter max. 110 mm total power requirement 30 kW weight of the machine ca. 10 t Drilling Ø, approx. 2 - 50 mm Boring Ø, approx. 100 mm Drilling depth, max. (see stroke / mounting length) 1,600 - 2,000 mm Stroke of drilling slide, approx. 4,000 mm Distance between the two spindle heads 5,000 mm Height of centres above guideways 350 / 450 mm Bdedjt Hwucepfx Akqed Drilling feed of drilling slide, infinitely variable 20 - 200 mm/min Quick feed of drilling slide 2,500 mm/min Spindle speeds via belt disks 260 - 650 / 650 - 1,625 rpm Workspindle drive 24 kW Drive of coolant pumps 1 x 7.5/15 kW and 1 x 15/28 kW Total electrical load, approx. 60 kW - 380 V - 50 Hz Total length of machine / guideways 7,500 / 5,000 mm Weight, approx. 10,000 kg Accessories / Special Features * Machine consists of the following elements: Main spindle on the left-hand side, followed by the coolant oil supply device. Table group, driven by ball screw spindle. Coolant oil supply device with elevated height of centres. At the end is a headstock, Type B 16, with drive motor approx. 7.5 kW, n = 900/2400 and 2400/6000. Large coolant device with filter unit. Large selection of accessories and drilling tools with Ø up to 100 mm. * Machine is suitable for working with a rotating workpiece together with a fixed drilling tool (ELB and BTA Process), as well as for a fixed workpiece and a rotating drilling tool. It can work with internal oil feed (Elb) or with external oil feed (BTA). * Complete oil coolant unit with tank and filter and two SIG high pressure pumps. Number of litres can be set: 17 / 40 / 120 or 220 / 500 litres per minute. Capacity approx. 2,500 l. * Feed of main slide is via ball screw spindle and infinitely variable DC motor. Mounted on the main slide is at present a table, approx. 800 x 800 mm, cross-adjustable approx. 500 mm, and suitable for holding cubic and cylindrical workpieces. Electric control via cam rail, approx. 2,500 mm long. End switch for quick feed, feed and return. * 2 closed 3-point steady rests. * FORKHARDT 3-Jaw Chuck, manually operated, Ø approx. 315 mm. * Modernized control panel with speed display, feed setting and display, display for kW, switch for feed, quick feed, right/left, etc. * 2 separate switch cabinets, separate coolant oil display device, bushes, reducers, clamping helps and lots of other accessories. This is a very valuable machine because of all the accessories!

Condition: ready for operation (used), Year of construction: 2014, Machine type Deep hole drilling machine Manufacturer TBT TIEFBOHRTECHNIK Type Bedpfoza Arnjx Akqsdd ML 250-2-850 Year of manufacture 2014 Condition Used Control type CNC Control system SIEMENS Location Factory location Control system SIEMENS Drilling diameter Ø 3 - 25 (18) mm Speed 1000 - 6100 RPM Drill slide stroke 850 mm Drilling depth 550 mm Spindle distance 240 mm Dimensions L x W x H approx. 6 x 5 x 2.3 m Shipping weight approx. 6000 kg Shipping size approx. 10 loading meters

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm Bodpfx Aou Id H Aokqodd *

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, drilling depth: 1,500 mm, feed length X-axis: 2,030 mm, feed length Y-axis: 1,800 mm, feed length Z-axis: 1,700 mm, table length: 2,200 mm, table width: 1,800 mm, table load: 12,000 kg, Deep hole drilling machine Ixion (drilling depth 1500mm, X 2030mm, Y 1800mm, Z 1700mm) The base machine is a PEGARD drilling machine AF 13 (year of manufacture 1976, machine weight approx. 32 t) 1996: Retrofit and conversion to a deep hole boring machine (the conversion was carried out by ROTTLER Maschinenbau GmbH - Mudersbach) 2024: Overhaul (spindle bearings renewed, drill bushing holder/coolant supply disassembled and cleaned, hydraulics for tool clamping repaired, coolant system and hydraulic unit cleaned and inspected, etc.) Working ranges: - X-axis (longitudinal) 2030mm - Y-axis (drilling unit vertical) 1800mm - Z-axis 1700mm - Drilling depth in one operation 1500mm - B-axis (rotary table) 0-360° Drilling unit: - Main spindle ISO40 - Spindle speed 60-6000 rpm - Drive power at 100% ED 7.5kW NC rotary table (B-axis) - Table surface 2200x1800mm - Rotary axis 0-360° - Max. table load 12,000kg - Positioning accuracy +/-15 sec Coolant system/chip conveyor - Tank size approx. 1000l Bdjdpfoy Rhzwex Akqed - Coolant pressure max. 80 bar - Flow rate max. 46 l/min - Paper band filter - Scraper conveyor/chip conveyor CNC control - Mitsubishi M325 with 14" color screen - Integrated tool breakage monitoring by querying the torque of the main spindle - Real-time process variable visualization of torque - Deep hole drilling technology programs - Portable electronic handwheel

Year of construction: 1986, condition: used, Technical details: core drilling diameter max.: 16-65 mm bore depth: 600 mm total power requirement: 73 kW Bdsdow Dz Tajpfx Akqjd weight of the machine ca.: 6 t

Condition: excellent (used), Year of construction: 1996, completely overhauled in 2005 Number of spindles: 2 Drilling capacity per spindle, steel: 1-6 mm Drilling depth: max. 350 mm Bjdpfx Aey Eykgskqodd Z travel: 350 mm W travel: 350 mm Drive power per spindle - 100% duty cycle: 3.7 kW - 50% duty cycle: 5.5 kW Spindle speed: 3,000 - 27,000 rpm Spindle mounting: Ø 10 - 60 mm Coolant pressure: max. 150 bar Coolant flow: 48 l/min Coolant volume: 1,000 l Compact band filter High-pressure pump