Used Decoiler-Straightener Combination for sale (4,514)

Condition: used, Heavy-duty straightening and welding plate, steel and grey cast iron, heavily ribbed formerly a marking and measuring plate heavy straightening plate Hedpfx Aeu Inwfsp Denn length 2000 mm width 1000 mm thickness 160 mm working height 850 mm plate thickness approx. 35 mm throughout - 3 height-adjustable feet weight with feet 680 kg good condition

Condition: used, Straightening and welding plate, cast steel and gray cast iron, heavily ribbed Cast plate, heavy straightening plate Length 1500 mm Width 1000 mm Thickness 100 mm Hnjdpferl U Swsx Ap Don Continuous plate thickness approx. 37 mm Table height 860 mm - Table base made of steel (custom-made) Weight 640 kg Good condition

Condition: used, Strip Straightening Machine for Coil Material WANZKE Type RG 400-7 Coil Processing Line REF No.: 1349-6 Year of manufacture: 1983 Nominal strip width: 400 mm Roll width: 408 mm Strip thickness: max. 2 mm Strip cross-section: max. 600 mm² Roll width, straightening rollers: 408 mm Number of straightening rollers (top): 3 (non-driven) Number of straightening rollers (bottom): 4 (driven) Straightening roller diameter: 50 mm Feed rollers: 2 pcs, Ø 50 mm (lower roller driven) Feed roller width (top): 390 mm Feed roller width (bottom): 408 mm Strip speed: approx. 5 - 45 m/min Motor power: 1.1 kW Power supply: 230 Volt, 50 Hz - Infinitely variable straightening speed via DC motor with DC controller - Drive via geared motor with chain drive - Loop control with speed regulation with 2 speed stages Hedpfxjxw Rcus Ap Djnn - Upper roller frame adjustable via 4 handwheels - 4 dial gauges for fine adjustment - Mechanical opening of the upper rollers via eccentric lever - Adjustable lateral strip guide at the infeed side - 2 roller baskets for strip guidance - Electrical diagram available Space required by straightener with control unit (L x W x H): 1200 x 800 x 1600 mm Weight: 620 kg Good condition

Condition: used, Technical details: round bar steel: 32 mm square edge steel: 30 angle steel: 90 x 8 mm flat steel: 100x18 mm Knife length: 220 mm Hedpfx Apju Icgho Djnn number of cutting strokes max.: max. 30 Hübe/min p.Min. voltage: 220/380-50 V rated current: 15,8/8,55 connected load: 4,8 kW weight of the machine ca.: ca. 1,1 t Dimensions (LxWxH): 0,8 x 1,2 x 1,3 m Capacity: - Steel sheet: 16mm - Flat steel: 100 x 18mm - T profile: at 45°: 65 x 7mm, right angle: 90 x 8mm. Machine is in working condition *

Condition: used, Year of construction: 1989, Technical details: plate width: 1600 mm Hnsdpjyvfy Tjfx Ap Don plate thickness: 20 mm smallest sheet thickness: 6 mm Number of Straightening rolls: 11 straightening roll diameter: 180 mm straightening feed: 10 m/min connected load: 76 kW total power requirement: 75 kW weight of the machine ca.: 39,2 t

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. * Hnodpjvgbgasfx Ap Den

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: Hnsdpfsu Ickysx Ap Don with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: used, Technical details: sheet width: 153 mm material thickness: 1,5 mm Number of Straightening rolls: 4x oben/upper/ariba Number of Straightening rolls: 5x unten/lower/abajo throughput speed: 180 m/min total power requirement: 7,5 kW Weight approx.: 0,543 t space requirements of the machine approx.: L:1,6xB:0,8xH:1,22 m Inside of the machine is a coil taper integrated, whcih can be adjusted via threaded spindle. description: - upper roll : width:160mm, dia. approx. 40mm, not driven, via manual adjustment - lower roll: width: 160mm, dia. approx. 40mm, fixed, not adjustable, driven Hnedpfx Aou Ic Ekop Djn - coil taper: max. dia.=1000mm, max. width 153mm, max. weight 500kg *

Condition: used, Technical details: pressure: 200 t stroke: ca. 200mm mm table surface area: L:1200xH:450 mm jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Hnodpsu Nfrpsfx Ap Djn Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control accessories: - div. limit stops, tools, try square and marking gauges i.D. *

Condition: used, Technical details: band width: 80 mm plate thickness: 1,5 mm number of rolls: 5 total power requirement: 1,2 kW Hnedpou Ic E Rjfx Ap Den weight of the machine ca.: 150 t space requirements approx. LxWxH: 1,1 x 0,7 x 1,4 m straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D. *

Condition: new, AUTOMATIC DOUBLE SPEED MOTORIZED HYDRAULIC PRESS WITH RAPID POWER 20 TON Max capacity TON 20 Approach speed (in rapid) mm/min 1700 Hnedpfx Apsrvz A Se Den Working speed (in slow) mm/min 440 Cylinder rod stroke mm 300 Cylinder rod diameter mm 45 Shank diameter mm M14 Tank capacity liters 30 Max pressure bar 350 Voltage V 400 Frequency Hz 50-60 Motor Power kW 1.5 Max absorbed current A 3.8 Weight Kg 200

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Equipment: documentation/manual, Rastrematubi Pedrazzoli STERN BROWN 40 Used CE Complete with oil cooling system Tube end-forming machine designed to shape the tube’s end by rolling, allowing for closure of the tube with either a round or flat shape. Hydraulic tube end-forming machine Hnedpfx Asy N S E Dop Dsn Max. end-forming capacity = Ø 40×2 mm Flat or round tube end closure Technical data sheet attached

Condition: new, Year of construction: 2024, Electro hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: 400 V 50-60 Hz immersed motor control unit. Pump for fast approach and return in 20 bar calibration. Adjustable pressure pump with handwheel to obtain the required power. Pressure relief valve with mechanical block to prevent overpressure. Pressure gauge (standard) that allows to calibrate with extreme precision the delivered power. The P110 MR is the only hydraulic press consisting of 2 laser-cut FE 510 monolithic structure uprights. without welding in the places of greatest stress This feature gives it extraordinary robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-litre tank and has a rapid descent speed of 1,400 mm/min. Weight : kg 1,100 Hnsdpfxefh R N Dj Ap Dsn Max pressure : bar 350 Max. flow rate : t. 110 Rapid flow rate :l/min 34 Slow flow rate : l/min 5 Inside shoulders : mm 1004 Rapid rod feed : mm/min 1.400 Slow rod feed : mm/min : 130 Voltage : V 400 Frequency :Hz 50-60 Power : kW 3 Max. absorbed current : A 7,3 Cylinder stroke : mm 300 Cylinder diameter : mm 200 Stem diameter : mm 110 Piston descent speed : mm/sec 23 Tank capacity : litres 30

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 7 A, pressing force: 150 t, stroke length: 300 mm, Equipment: CE marking, documentation/manual, MOTORIZED HYDRAULIC PRESS WITH AUTOMATIC DOUBLE SPEED AND RAPID ADVANCE CAPACITY: 150 TONS The monolithic frame is entirely laser-cut and securely bolted in package form. This characteristic makes all our presses deformation-resistant, even in areas subject to the highest stress. All components are manufactured in Italy. Hydraulic power unit with ICME submerged motor 400 V, 50/60 Hz; cylinders and frames made in Italy. GALTECH monobloc distributor. No. 2 single-direction external gear pumps in aluminium by VIVOIL: one dedicated to fast approach and return (set at 20 bar), and one with pressure adjustable via handwheel to set the required force. Maximum pressure valve with mechanical lock to prevent overpressure. 2 MP CETOP high-range modular block. Standard pressure gauge for displaying delivered power. INTECH electrical control panel, certified to current standards and independently CE marked. Maximum capacity: 150 tons Rapid approach speed: 1,450 mm/min Working speed (slow): 105 mm/min Cylinder rod stroke: 300 mm Cylinder rod diameter: 110 mm Shaft diameter: M30 Tank capacity: 50 L Hodpfxjy E Rr Io Ap Djnn Maximum pressure: 350 bar Voltage: 400 V Motor power: 3 kW Weight: 1,300 kg

Condition: excellent (used), Year of construction: 2009, decoiler - expansion mandrel type: AE-050 strip width: 400 - 1.500 mm strip thickness: 0,5 - 3 mm coil weight: 20 t coil OD: max. 1.800 mm mandrel Ø: 508 mm year: 2009 Hjdeupg Scepfx Ap Denn

Condition: good (used), Year of construction: 1969, number of straightening rollers: 7, working width: 2,500 mm, sheet thickness (max.): 39 mm, max. sheet width: 2500 mm Convexity length of rollers: 2700 mm max. sheet thickness (St 50): 32 mm max. sheet thickness (St 34): 39 mm min. sheet thickness (St 50): 8 mm number of straightening rollers: 7 rollers number of driven straightening rollers: 5 rollers diameter of straightening rollers: 290 mm diameter of input/output straightening rollers: 345 mm number of support rollers: 13 diameter of support rollers: 288 mm stroke of upper beam: 120 mm Straightening speed: 16 m / min Rated power of main drive: 90 kW Total load: 138 kW Hnodpjzcntvefx Ap Don

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, sheet thickness (max.): 10 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Hodpfjzcntiox Ap Dsnn Weight: 32 t Additional information: - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: good (used), functionality: fully functional, control type: manual, coil weight: 1,000 kg, coil width: 1,250 mm, Abcoiler reel Hjdpfx Aezcagbep Djnn mobile, with brakes lightly used, see pictures width 1250 mm We can assist with loading sold without warranty and right of return

Year of construction: 2014, condition: used, Cannon/Breyer Combined extrusion thermoforming line (2014) for producing of continuous 6-layer PE plate to thermoform automotive tanks 1500x1600mm max. plate size 500 x 500mm min. plate size to be processed 10mm max. plate thickness 4,0mm min. plate thickness 24kg approx. max. plate weight (at 1600x1500x10 mm) 700mm approx. processing height 1.100 to 1.170 kg/h max. capacity - approx. 27 tanks per hour Comprising: Breyer Extrusion Line composed of - Breyer Extruder 105mm for HDPE and Master batch - Breyer Extruder 120mm for HDPE Regrind - Breyer Co-Extruder 45mm for HDPE ADMER - Breyer Co-Extruder 45mm for HDPE EVOH LDPE - Breyer Extruder 105mm for HDPE Cannon thermoforming press (7x) Kuka Industrial robots for plate supply to press, feeding of internal tank parts, unloading from press, edge trimming, loading/unloading to calibration station FDM/Piovan batch supply Hnjdjy Uligspfx Ap Dsn Vacuum supply Tempering units for tooling PLEASE NOTE: Tooling/moulds and any product related gripping tools are not included! Combination Lotting: The complete Line CET 1 is lotted as a single combination Lot 29381-36 Its components are simultaneously offered as individual Lots 29381-39, -40, -42, -45, -46, -47, -50, -53, -55, -59, -62, -64, -71, -75, -77, -78, -81, -85, -86, -87, -88, -91, -94, -97, -98, -104, -108, -111, -114, -120 Bidders can bid on the complete line and/or on individual lots. Sales are conditional subject to seller approval. It is likely that the seller will approve the highest aggregate bid for the line either as a single lot or as individual lots. Successful bidders will be notified within 2 working days.

Condition: used, Year of construction: 1981, max. wheel diameter 36 mm Hnodpfsy S Ec Ijx Ap Djn gear width 36 mm max. module 10 total power requirement 12 kW weight of the machine ca. 11,2 t

Year of construction: 2024, condition: like new (used), functionality: fully functional, We offer this like-new Jouanel DVS1000D double unwinding reel, manufactured in 2024. Maximum coil width: 1000 mm Maximum coil weight: 1200 kg Maximum coil outside diameter: 1000 mm Hodpfsza Eblox Ap Djnn Coil inside diameter: 285 to 540 mm Dimensions L × W × H: 1760 × 1540 × 1380 mm Net weight: 239 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2011, pressing force: 160 t, Press force: 160 t Minimum counter bearing distance: 550 Maximum counter bearing distance: 1550 Maximum workpiece width: 400 Cylinder stroke: 450 mm Clearance – horizontal: 400 mm Total power requirement: 18.5 kW Machine weight approx.: 13.5 t Space requirement approx.: 3.65 x 1.7 x 1.62 m Additional information: Hydraulic, horizontally acting straightening and bending machine Type DZ 160 Press force: 1600 kN Adjustable from 0-1600 kN Power consumption: 18.5 kW Hydraulic pressure: 245 bar Minimum counter bearing distance: 550 mm Maximum counter bearing distance: 1,550 mm 2 movable straightening beams for applying pressure and counter pressure Maximum workpiece width: 400 mm Mains connection: 400/230 V, 50 Hz N/PE Dimensions (L x W x H): 3,650 x 1,700 x 1,620 mm Machine weight: 13,500 kg Hydraulic unit (L x W x H): 1,700 x 800 x 1,400 mm Control cabinet: 800 x 500 x 1,800 mm Kunkel hydraulic straightening and cambering presses are used in heavy steel construction to pre-tension or straighten beams and profiles. Especially in modern steel high-rise construction, it is essential, for aesthetic reasons, to give structural elements a camber – a slight curvature – so that, under load, the impression of straight, horizontal contour lines is maintained. Hodpjzcc T Dsfx Ap Donn Kunkel machines offer the highest precision and economic efficiency. With this straightening press, the workpiece can be machined in both directions in a straightening position. All straightening blocks are adjustable. In addition, the machine has a mobile control panel.

Condition: used, Year of construction: 2007, operating hours: 2,000 h, power: 283 kW (384.77 HP), Equipment: air conditioning, cabin, * Engine manufacturer: John Deere Hjdpfx Apjil Hads Dsnn Equipment: Air conditioning, Straw chopper, Cutterbar wagon, Slope compensation, On-board computer / monitor, Throughput control, Yield measurement, Horizontal reel adjustment, Hydrostatic drive, Reversing device, Cutterbar, Loss measurement Shaker with cutterbar JD625R with 7.60 m working width, transport wagon and rapeseed table ENGINE MAKES NOISE.

Condition: used, Year of construction: 2003, Technical details: round bar steel: 45 mm square edge steel: 45 mm L-beam: 130x130x13 90 mm flat steel: 450x15 mm hole punching press: 80 ton throat: 300 mm stroke: 70 mm work height max.: 1195 mm total power requirement: 11 kW dimensions of the machine ca.: 2000x1800x2100 mm Hsdpfx Apeybbz Rj Dsnn weight of the machine ca.: 2700 kg

Condition: used, Year of construction: 2013, Punching capacity 220 kN laser capacity in Watt 4000 travel -x axis 2500 mm travel -y axis 1250 mm Cutting capacity structural steel 8 mm Cutting capacity stainless steel 8 mm Cutting capacity aluminum 6 mm workpiece weight 280 kg weight of the machine ca. 24.000 kg dimensions 10130 x 8898 x 2328 mm Includes DORNER 2200 Series conveyor belt Operating hours: - Approx. 7,880 h Standard equipment: - Travelling ball-bearing tables - Linear magazine for tool stations and clamping jaws - 22 tool stations, 3 clamping jaws - Foot switch for closing the jaws - Flap for stamped parts 500 x 500 mm incl. sensor - Chip container - 2 good parts containers (stamping and laser side) - Initial fill of hydraulic oil - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - High-speed flap for laser parts 500 x 500 mm incl. sensor - Liftable laser cutting table - Liftable laser cutting table - Slag cone detection TRUMPF Laser: - CO2 laser TruFlow 2700 incl. LensLine and optimized StandBy - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control Cutting head: - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - ControlLine Punching head: - Electro-hydraulic punching head - Hydraulic single-tool holder with 360° rotation - Programmable hold-down device (active/passive/re-adjustment) - Tool length compensation - Spray lubrication for punch - Punching scrap extraction Hnsdsy D T S Ujpfx Ap Dsn - Level monitoring for thread forming and tool lubrication Control system: - Open control system based on Rexroth IndraMotion MTX - 15" TFT color screen - Teleservice via the Internet - Automatic shutdown - Production plan Data transfer - USB interface - RJ45 network connection Safety: - CE marking - Dual-beam safety light curtains - Emergency stop