Used Danfoss Cx 023U1250 for sale (449)

Condition: good (used), Year of construction: 2020, functionality: fully functional, cooling capacity: 270 kW (367.10 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,580 kg, input voltage: 400 V, total width: 2,250 mm, total length: 4,340 mm, total height: 2,290 mm, warranty duration: 6 months, Aircooled chiller CLIMAVENETA NX2 G06 Y 0294T 270 KW Cooling capacity: 270 kW / 76.77 tons (12/7 — 35°C) Year of manufacture: 2020 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 4 pcs. DANFOSS DSH295A4APC (scroll) Type of refrigerant: R454B Number of fans: 6 pcs. Hydraulic module: 1 pcs. water pump Lowara PLM112RB14S2/340 E3 Dimensions: 4.34x2.25x2.29 m. Weight: 2580 kg. Working hours: 6233/6233/6233/6233 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Nodszxdcdspfx Abyodc WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 261 kW (354.86 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,564 kg, input voltage: 400 V, total width: 2,260 mm, total length: 2,420 mm, total height: 2,300 mm, warranty duration: 6 months, Aircooled chiller CARRIER 30RBP 260 0014 PE 261 KW Cooling capacity: 261 kW / 74.21 tons (12/7 — 35°C) Year of manufacture: 2015 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum. Compressors: 4 pcs. Danfoss SH295A4ACE (scroll) Type of refrigerant: R410А Number of fans: 4 pcs. (Frequency inverter) Dimensions: 2.42x2.26x2.3 m. Weight: 1564 kg. Working hours: 602/592/1937/1912 h. Condition: Used, tested, fully operational Ndsdjzxnfispfx Abyec CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 100 kW (135.96 HP), type of input current: three-phase, type of cooling: air, overall weight: 775 kg, input voltage: 400 V, total width: 2,300 mm, total length: 2,100 mm, total height: 1,350 mm, warranty duration: 12 months, Aircooled chiller CARRIER 30RB100R 100 kW Cooling capacity: 100 kW / 28.43 tons (12/7 — 35°C) Year of manufacture: 2021 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 3 pcs. Danfoss DSF155A4ACA (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. Dimensions: 2.1x2.3x1.35 m. Ndsdpfx Abszwua Rjyoc Weight: 775 kg. Working hours: 0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 160 kW (217.54 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,174 kg, input voltage: 400 V, total width: 2,260 mm, total length: 2,050 mm, total height: 1,930 mm, warranty duration: 12 months, Aircooled chiller CIAT LD 0600R 0130 160 KW Cooling capacity: 160 kW / 45.5 tons (12/7 — 35°C) Year of manufacture: 2024 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 4 pcs. Danfoss DSF175A4ACA (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump GRUNDFOS AC 30-142 (Frequency inverter), expansion vessel, buffer tank. Dimensions: 2.05x2.26x1.93 m. Weight: 1174 kg. Working hours: 40/38/34/34 h. Condition: Outlet CONDITION, TESTING & READINESS Nodpszwu H Defx Abyodc The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 1996, Overview This KHS Innopas P II SG 30-200 is a tunnel pasteurizer for bottled beverages in glass bottles, built in 1996 by KHS (Klöckner Holstein Seitz, Germany). With a treatment area of 113.5 m² across 8 treatment zones (3 of them recuperative), it pasteurizes at approx. 24,000 - 25,000 bottles per hour depending on bottle format, at a maximum pasteurization temperature of 75 °C. For 0.7 l glass bottles the total treatment time is approx. 48.6 minutes (21.2 min heating, 12.3 min pasteurization, 15.0 min cooling) at approx. 5 pasteurization units. The main control is a Siemens SIMATIC S5 PLC; the pasteurization unit setting (temperature diagram) was later upgraded to a Siemens S7 with touch panel. Danfoss frequency drives are fitted. The machine ran at a German mineral water bottling plant until mid-2024 and is now completely dismantled and professionally stored, with the conveyor belt sections and components palletized - ready for immediate collection. Technical data - Manufacturer: KHS (Klöckner Holstein Seitz) - Model: Innopas P II SG 30-200 - Year of manufacture: 1996 - Machine type: tunnel pasteurizer - Capacity: approx. 24,000 - 25,000 bottles/hour (depending on bottle format) - Treatment area: 113.5 m² - Treatment zones: 8 (H1-H3, S, P, C1-C3 plus cooling tower zone), 3 recuperative - Max. pasteurization temperature: 75.0 °C (0.7 l) / 72.5 °C (0.33 l) - Inlet temperature: 15.0 °C; outlet temperature: approx. 32 - 38 °C depending on format - Total treatment time: approx. 48.6 min (0.7 l) / 77.1 min (0.33 l) - Pasteurization units: approx. 5 PE - Machine water content: approx. 14.4 m³ - Water consumption at nominal capacity: approx. 1.5 m³/h - Heat consumption at nominal capacity (0.7 l): approx. 3,672 MJ/h - Installed power: approx. 66.2 kW - Electrical connection: 400 V, 50 Hz - Dimensions (L x W x H): approx. 21,000 x 4,210 x 2,750 mm - Required entry opening: approx. 2.7 x 3.0 m - Net weight: approx. 27,500 kg - Noise level: ≤ 85 dB(A) according to ISO 3744 Equipment - Siemens SIMATIC S5 PLC (main control) Ndedpfx Aszwxu Ssbyjc - Pasteurization unit setting (temperature diagram) upgraded to Siemens S7 with touch panel - Danfoss frequency drives - Modular plastic conveyor belt with drainage openings, belt sections palletized - External pump assemblies and inspection windows - Electrical cabinets with main disconnect switch - Original KHS documentation (datasheets and drawings) Condition Used. The machine is completely dismantled and stored; belt sections, piping and components are palletized for transport. The machine can be visited on request. Availability Immediately. Location: Germany. Loading by the seller is possible.

Condition: used, Year of construction: 2020, operating hours: 35,933 h, functionality: fully functional, machine/vehicle number: 200202-0010, total length: 8,250 mm, total width: 2,600 mm, total height: 3,150 mm, type of input current: DC, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, We are offering our outdoor drying system, model RG 50, from Heber. This weather-resistant, container-like drying unit is used for the technical drying of: Wood chips Grain Hay / Straw Bulk goods in general The system operates according to the principle of convective warm air drying: Ndedszba Nyepfx Abyjc Heat source Waste heat (e.g., from a CHP unit) Alternatively, oil/gas heating Air treatment, fan draws in ambient air, air is heated, drying process Warm air flows through the material, moisture is absorbed, exhaust air, moist air is discharged High energy efficiency through waste heat utilization, uniform drying, automated operation. Air flow rate: 55,000 m³/h Continuous operation (24/7 possible) Danfoss control system, manual is available. With 6 possible connections for drying containers. The system is still connected but is no longer in operation. Dismantling is the responsibility of the buyer! A telecrane and a low-bed trailer are required for transport! Inspection is possible by appointment!

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P1065-22-A-01, controller model: Siemens SPS S7, wall material: stainless steel, cooling capacity: 180 kW (244.73 HP), nominal flow rate: 16,500 m³/h, product height (max.): 150 mm, Due to a rescheduling of a site visit, the auction end date has been postponed to Thursday, June 25, 2026! The new price of the machine was €650,000! TECHNICAL DETAILS Capacity (for rolls weighing approximately 60g): 10,000 - 15,000 pieces/hour Layout: 180° layout Levels: 17.5 Free product height: approx. 150 mm Level spacing: approx. 216 mm Total cooling capacity: approx. 180 kW Total power consumption: approx. 70 kW Power connection: 400 / 230 V, 3-phase, 50 Hz Refrigerant: R717 Refrigerant supply: NH3 pump system Ambient temperature: above 10 °C Belt system Belt guidance: from bottom to top Infeed height: approx. 8,500 mm / 500 mm outside the cell wall Outfeed height: approx. 4,728 mm / 400 mm outside the cell wall Belt type: Stainless steel wire belt with side edges on both sides Belt mesh: 12.7 x 27.43 mm Wire thickness: 1.4 mm Ndsdpfx Abozardtsyoc Belt width: approx. 762 mm Usable belt width: approx. 700 mm Usable belt length: approx. 300 m Belt length including infeed and outfeed: approx. 320 m Housing Housing length: approx. 8,700 mm Housing width: approx. 6,920 mm Housing height: approx. 5,200 mm Insulation thickness: approx. 140 mm Plastic elements: approx. 2,600 mm Width of operator walkway: approx. 1,500 mm Evaporators Number of evaporators: 4 units Evaporator capacity: approx. 60 kW each Air flow: vertically drawing, 45° upwards Air temperature: approx. -32 °C Evaporation temperature: approx. -40 °C Defrosting: manually with air or hot gas Evaporator surface area: 311 m² each Air volume: 16,500 m³/h each Fans: 4 units per evaporator Fan power: approx. 7.5 kW Air ring heater: 4 x 0.72 kW Defrosting interval: sequential Heater in the pan: hot gas Control and switch cabinet Control system: Siemens PLC S7 CPU: 1512SP-PN Touchscreen: 12" Operating panel: TP-1200 Comfort Panel Interface to the refrigeration unit: 0 - 10 V Main drive: 1 x approx. 2.2 kW Overdrive: approx. 1.1 kW Switch cabinet: stainless steel on a stainless steel frame Temperature display: min. 1x per day Operating hour counter: available Belt cleaning: freely programmable Alarm light: optical, green / yellow / red Construction Material: Stainless steel 1.4301 Conveyor belt: Stainless steel, 762 mm Side guide for conveyor belt: approx. 25 mm Number of outlets: 2 units Product guides: 2 units EQUIPMENT Stainless steel construction Insulated housing with 140 mm insulation thickness Stainless steel belt with side edges on both sides Belt path from bottom to top Internal arrangement of the single-tower spiral Infeed at the bottom Outfeed at the top Hygienic design Food-grade plastics Easy-to-maintain accessibility SEW main drive with Danfoss frequency converter SEW overdrive with Danfoss frequency converter Motors in energy efficiency class IE3 Siemens PLC S7 with CPU 1512SP-PN TP-1200 Comfort Panel Touchscreen display Variable belt speed Operating hour counter Fault reporting system with traffic light and signal horn Emergency stop switch and safety sensors Height and belt control on each level Stainless steel cabinet on stainless steel frame Freezer LED lighting controlled via the touch panel Welded stainless steel base pan with slope and drainage Under-freezing protection heater with a reserve circuit Floor temperature sensor with reserve sensor 4 separate evaporator units, each with one fan Evaporator pipes made of stainless steel Evaporator housing made of stainless steel Evaporator pans made of stainless steel Hot gas defrosting made of stainless steel in the unit Sequent

Condition: new, mileage: 21 km, power: 110 kW (149.56 HP), fuel type: diesel, empty load weight: 2,895 kg, maximum load weight: 605 kg, overall weight: 3,500 kg, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 3, loading space length: 2,720 mm, loading space width: 1,900 mm, loading space height: 500 mm, Equipment: ABS, air conditioning, central locking, crane, differential lock, immobilizer system, onboard computer, soot filter, traction control, trailer coupling, FUSO Canter 3S15 aluminum flatbed truck with loading crane, immediately available for rent with an option to purchase. Chassis: Fuso 3S15 Canter - Gross vehicle weight 3500kg, payload of the complete vehicle with loading crane and aluminum flatbed approx. 600kg - Manual transmission - Differential lock with limited slip - Batteries 2 x 100 AH - Trailer coupling, ball hitch 3500kg with wiring harness (factory-installed) - Heated exterior mirrors - Automatic climate control - Radio preparation - Reversing warning - Auxiliary drive with speed increaser Nsdpfx Ajywzygebyodc - Battery cover and AdBlue tank cover - Preparation for battery disconnect relay - Traction tires Continental 195/75/R16C - Seat covers Aluminum flatbed: - Internal dimensions: 2720mm x 1820mm x 400mm - Floor panel 18mm - Floor frame with airline track all around - Airline track also in the front panel - Aluminum side walls, anodized, with folding step, easily removable - Tool box - Work lights - Other flatbed dimensions also possible Loading crane: with 3 x hydraulic extensions (Country of manufacture: Italy) - Lifting capacity according to manufacturer: Max. 995kg at 3.2m = 815kg, at 4.40m = 575kg, at 5.60m = 400kg, at 6.80m = 300kg, at 8.05m = 220kg - Design according to CE directive (EN 12999) - Swivel range 370° (mechanical swivel range limitation 190°) - All hydraulic cylinders are double-acting - Piston rods are hard chrome-plated - Pressure relief and load holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33l) with filter, mounted on the crane base - Support legs, extendable on both sides, special support, support width 3.10m - Hydraulic support legs, swiveling by 30° and 180° - CE, incl. M.O.L. - Load hook and attachment brackets - Onboard voltage 12V - Electrical modules for Danfoss S800 control block, 4 functions - Danfoss control block S800, 5 functions incl. high-pressure filter - Special support legs, support width 3.10m, 1 piece - Additional cost for shortened support legs (by 80mm) - Mechanical arm extension, lifting capacity 1.30m (7.0k) - Stainless steel screws and stainless steel hose clamps - Dinitrol application (cavities) - Zinc primer - Switch for work lights near the control block, factory-installed - LED work lights on the knuckle arm, factory-installed - LED for 2 support legs - Optional: Reversing camera with Carplay, shovel holder, 90° rope, ladder carrier / transport frame for front or rear wall, additional storage boxes available. Subject to errors and prior sale. ... Climate control, automatic climate control, VAT can be shown separately, ASR, ABS, trip computer, electric windows front, electric immobilizer, central locking with remote control, trailer coupling, power steering, differential lock, spare wheel, twin tires, cab: short cab, electric windows, work lights, crane, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, can be rented, emission sticker: 4 - Green, reversing camera

Condition: new, mileage: 50 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space length: 6,200 mm, loading space width: 2,500 mm, loading space height: 600 mm, Year of construction: 2025, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 35.520 - EURO 6 with F805 including L436 fly-jib and V20 winch!!! Tipmatik - Automatic transmission 8x4 Three steered axles STEERING / LIFT axle Front outriggers approx. 14,000 KG Nedpfx Aoyxa Dtsbyedc Flatbed body with sideboards 6200x2550x600 mm Steps Diamond plate floor Removable sideboards 9 x LED lights Extendable overwidth markings to 3500 mm width Start/Stop Rotating beacon 8 x Rail pockets 6 x Lashing eyes 6500daN Toolboxes Trailer hitch Storage compartments Storage boxes 20-foot container locking mechanism Perforated side profile with lashing eyes 2500daN Crane: FASSI 705 R.2.7, F805R.2.7, F905R.2.7 with fully hydraulic 4-point outriggers, with 6 hydraulic extensions on the main boom, fly-jib L436 with 6 hydraulic extensions, rope winch, cross-function remote control V7, emergency stop, FSC II outrigger monitoring, AWC (automatic winch control), accessories complete for winch operation, pivoting sheave, quick coupling between main boom and fly-jib and more... TECHNO SERIES !! NEW CRANE MODEL Endless slewing range All hydraulic cylinders double-acting Piston rods hard-chrome plated Double knuckle system with PROLINK (overextending knuckle arm up to 10°) Electronic overload cut-off device with FX800 FASSI stability control FSC-S/2 including LMB II Emergency shut-off, as well as optical alarm (90% and 100%) Pressure relief and load holding valves XF system (Extra Flink) + XP system (Extra Power) + FL system (Full Lift) RCH or RCS radio remote control with linear levers and display of pressure range (in bar and %) and 90% + 100% warning in the display Danfoss D900 control block with 4 control valves mounted on the crane pillar Emergency operation for crane control High-pressure filter is supplied pre-assembled with piping separate hydraulic tank (260l) with filter and oil cooler mounted on the crane base hydraulic outriggers, on both sides hydraulically extendable, outrigger span 10.00m, outriggers operable via radio Standard color RAL 3020 traffic red - all cylinders painted black IMC - System (Integral Machine Control) and ADC (Automatic Dynamic Control) = Load-dependent speed control Load hook and attachment bridles (short/500mm) Transport position: folded transversely to the direction of travel Attention: Observe operating voltage / 12V or 24V, standard 24V" FASSI stability control FSC-TECHNO Fassi V7S radio maxi - 8 linear levers Proportional control block » for the outriggers 180° hydraulically swiveling support legs / » on both sides Preparation for operation with variable pump » (LS) Control system for 2 auxiliary functions with » 2 hose guides / hxp-techno Auxiliary boom (Jib) L436, 6-way » hydraulically extendable Jib Double Power (JDP) Multi-coupling with cable entry » for jib mounted for 2 functions Control system for auxiliary function » rope winch Rope winch type V20 - 2,000daN, 60m rope » (12mm) with LMB and mechanical Permanently mounted rope guide for operation with auxiliary boom (Jib) AWC - (Automatic winch Control) for crane » Automatic rope winch control AWC - (Automatic winch Control) for JIB » Automatic rope winch control Work lights operable via display or radio 1 LED work light mounted on the knuckle arm » 1 LED work light mounted on the jib » LED for 2 outriggers, not mounted » (crane) LED for 2 outriggers, not mounted » (auxiliary support beam) Electric rotary distributor with 14 » slip contacts 1 zinc primer from 720RA to F820RA "Zinc primer for JIB ""L42""" Surcharge for Dinitrol application (cavities) Surchar

Year of construction: 2016, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH 360 Year: 2016 Width: 36 cm Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Conveyor: Entry conveyor belt – Motor: 0.25 kW – three-phase 400V – Product guidance via stainless steel comb Conveyor: Outfeed belt – Motor: 0.37 kW – three-phase 400V – Integrated air blow-off ramp Cutting unit – Cutting wheel Ø350 mm – 3 blade holders (45° and 90°) – 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – Option to add more – Rotation speed: 72 rpm – Motor: 0.37 kW – three-phase 400V – Guide with stainless steel bearings – Cutting kit available: 90° and 45° Product orientation kit: 1 symmetrical set, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function – Non-motorised stainless steel roller, Ø140 x 350 mm – Gap adjustment: manual – Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available Ndedpfoy Hdqasx Abyoc

Condition: used, Year of construction: 2011, functionality: fully functional, cooling capacity: 161 kW (218.90 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,500 kg, input voltage: 400 V, total width: 2,300 mm, total length: 3,620 mm, total height: 2,300 mm, warranty duration: 6 months, Aircooled chiller TRANE ECGAN600 161 KW Cooling capacity: 161 kW / 45.78 tons (12/7 — 35°C) Year of manufacture: 2011 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss CSHA150KE (scroll) Type of refrigerant: R407с Number of fans: 6 pcs. (2 pcs. frequency inverter driven) Dimensions: 3.62x2.3x2.3 m. Weight: 2500 kg. Working hours: 18195/18195/14900/14910 h. Condition: Good Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; Ndedpfx Aeyzzxqebyoc - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Year of construction: 2020, Overview This RINK automatic screw cap remover (unscrewer) was manufactured in 2020 and is designed for the automatic removal of screw caps from returnable glass bottles before the containers enter the bottle washing process. The machine was installed in a high-capacity returnable glass bottling line with a capacity of approximately 2,000 crates per hour. Systems of this type are typically positioned upstream of the bottle washer to ensure that bottles enter the cleaning process without closures. The machine is configured for 0.75 L GDB bottles in 12-bottle crates and includes format equipment for different crate variants. The system operates with cross-flow crate transport and a crate infeed direction from left to right. The installation includes a cap discharge system and blower unit for removing closures from the bottles. The machine was built with modern electrical components and is supplied with technical documentation. Technical Data Manufacturer: RINK Machine type: Automatic screw cap remover (unscrewer) Model: KM 790 / 4K-3K QL Year of manufacture: 2020 Capacity: approx. 2,000 crates per hour Application: Automatic removal of screw caps from returnable bottles before bottle washing Bottle format: - 0.75 L GDB bottle (height approx. 295 mm) Nsdpfxoytphcj Abyedc Crate formats: - 12-bottle Pool N2 crate (400 × 266 × 333 mm) - 12-bottle individual crate (395 × 295 × 355 mm) Crate transport: - Cross-flow crate transport - Infeed direction: left → right Transport height: approx. 700 mm (max. 750 mm adjustable) Dimensions: - Length: 2,700 mm - Width: 1,400 mm - Height: 2,950 mm Weight: approx. 3,000 kg Electrical equipment: - Danfoss frequency converter - Standard electrical configuration Additional equipment: - Cap transport system - Blower unit - Technical documentation available Condition: Used Availability: On request

Condition: new, loading space length: 5,300 mm, loading space width: 2,420 mm, total length: 6,500 mm, Year of construction: 2026, Brand new roll-off container with FASSI loading crane Roll-off container in a platform design with aluminum sideboards and a permanently mounted Fassi loading crane ELLERMANN roll-off container according to DIN 30722-1 with aluminum sideboards and crane platform Platform tipper body type K 33 s Internal dimensions: approx. 6.5/5.3 x 2.42 x 1.0 meters, all dimensions are approximate Useful volume: approx. 13 m³ Paint finish: in RAL color according to customer's request ? Mounting brackets for hook lift systems according to DIN 30722-1 (15,000 kg) with rear outside rollers and subframe made of INP 180 Outside rollers are greaseable and replaceable Mounting bracket Ø 50 mm, hook height 1,570 mm Transition from the subframe to the end wall support reinforced with 10 mm gusset plates ? Crane platform 20 mm thick at the end, length approx. 1,200 mm Reinforcement on the end wall support and subframe inside Additional stiffening on the end support ? End wall inner height approx. 1,000 mm ? Floor made of 5 mm St 37.2 (S235JR) ? Floor spar spacing 500 mm Spar profile U 80 x 50 mm ? Outer profile as a hole strip (a hole Ø 40 mm every 200 mm), Loadable with 500 kg / hole, max 5 tons per side, operable from the inside ? Aluminum sideboards, approx. 1.0 meter high, foldable and removable, 1 x divided in the middle by a removable center post ? Aluminum rear flap, foldable and removable (cannot be driven over) with removable corner posts ? All-around tarpaulin and net hooks ? Container double primed inside and out and double painted in a single color inside and out ? Aluminum sideboards unpainted ? UVV stickers with safety instructions ? Container tested and approved according to DGUV rule 214-017 (formerly BGR 186) ? Container test book (digitized) for documentation of the required annual recurring inspection according to UVV FASSI loading crane F150A.2 e-dynamic Design according to CE directive (EN 12999) The equipment manufacturer must carry out the inspection once the loading crane has been mounted in its final position and is ready for operation. Base unit: F150A.2 e-dynamic Slewing range 416° All hydraulic cylinders are double-acting Piston rods are hard chrome-plated Double lever system with PROLINK (overextension of the knuckle arm up to 15°) Electronic overload protection device with FX500 6 functions RCH or RCS radio remote control (linear levers) with Display and XP system Emergency stop, as well as optical alarm (90% and 100%) Including digitally adjustable slewing limit FASSI stability control FSC including LMB II Pressure relief and load holding valves, high-pressure filter Danfoss S800 control block with 4 control valves, operable from one side Separate hydraulic tank (90 l) with filter, mounted on the crane base Extendable on both sides, support width 4.60 m, hydraulic support - CE, including M.O.L. Nedpfxszq Iu Ij Abyodc Standard color RAL 3020 traffic red - all cylinders painted black Load hook and attachment bridges (short / 500 mm) Driving position: folded transversely to the direction of travel Dead point above the support beam Caution: Note the on-board voltage / 12 V or 24 V, standard 24 V F150A.2.23 e-dynamic » Base unit IE742 connection box Support spread to support width 5.4 m Move dead point 1 LED work light on the knuckle arm » mounted LED for 2 outriggers, not mounted » (crane) Control system for 2 additional functions with » 2 hose guides / eactive Slewing valve, only for cranes with rack and pinion Quick-release valve for the extensions E

Condition: new, fuel type: diesel, color: yellow, operation weight: 2,000 kg, chain condition: 100 %, emission class: euro5, Year of construction: 2026, Equipment: UVV, additional headlights, cabin, gripper hydraulics, hammer hydraulics, hydraulics, onboard computer, rubber tracks, standard shovel, NEW: Shantui SE20 Mini Excavator (2.0 t) Premium features at a great price – Now available for pre-order at Bagger2go! The brand-new Shantui SE20 is here! Compact, powerful, and equipped with high-quality features – ideal for gardening and landscaping, civil engineering, construction companies, and rental companies. Impressive technology: • Engine: Kubota D902 – powerful, reliable, and low-maintenance • Rotator: Original Danfoss – proven quality Nodpfxewg Etio Abyedc • Hydraulics: Hengli components – robust and efficient • Chassis: hydraulically adjustable from 99 cm to 130 cm – ideal for narrow access routes • Articulated boom: maximum flexibility even in confined spaces • Two speeds: precise maneuvering or fast routes • Hydraulic control: AUX 1 & AUX 2 digitally controlled – flow rate precisely adjustable • Control: Proportional joysticks with rocker switches – intuitive and precise operation Your advantages: • Secure your order now – special conditions for a limited time only • Lease-to-own available – we offer flexible financing solutions • Directly from Bagger2go GmbH – your partner for compact construction equipment

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects. Ndsdpfxoyb Rpdj Abyec

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 1,153 h, DYNO-MILL KD 6 Agitator Bead Mill (2007) For sale is a DYNO-MILL KD 6 horizontal agitator bead mill, manufactured by Willy A. Bachofen AG (WAB). This machine is a premium Swiss-made unit designed for the continuous dispersion and wet-grinding of pumpable products, ranging from low to high viscosity. This unit was manufactured in 2007 and decommissioned in fully functional, running condition with no known faults. It is distinguished by its exceptionally low usage history, having logged only 1’153 operating hours. It comes equipped with a high-wear-resistant Silicon Carbide (SiSiC) inner cylinder and hardened stainless steel discs. It is sold as a complete bundle, including a peristaltic pump, a tool kit, the original electric cabinet and yttrium-stabilized zirconium balls (used). Highlights • Low Usage: Only 1'153 operating hours—internal mechanics are in excellent condition. Ndodpfx Abjx Tdyzjysc • High-End configuration: Fitted with a ceramic Silicon Carbide (SiSiC) inner cylinder (6mm wall thickness) and hardened stainless steel discs for durability and contamination control. Sintered Silicon Carbide (SSiC) prevents product overheating significantly better than Zirconium or Steel liners. • Ready to Run: Sold as a complete package including the Electric Cabinet and a Peristaltic Product Pump. • Features the industry-standard WAB dynamic gap separator and pressure-balanced mechanical seal. • Voltage: Fitted with a modern Danfoss VLT frequency converter featuring wide-range input (380-480V, 50/60Hz), making the machine immediately compatible with both European (400V) and US (480V) power grids without modification Technical Specifications • Manufacturer: Willy A. Bachofen AG (WAB), Switzerland • Model: KD 6 • Grinding Chamber Volume: 6.0 Liters (Net volume ~5.7 Liters) • Throughput: approx. 50 – 200 kg/h (dependent on product/viscosity) • Main Drive: 11 kW Motor (440V / 60Hz rated) • Separation System: Dynamic gap separator (Tungsten Carbide rotor/stator) with adjustable gap width (0.15–1.0 mm) • Shaft Seal: Double mechanical seal (DGD) with integrated pressure rinsing circuit • Cooling: Forced water cooling jacket for the grinding cylinder • Weight: 695 kg 
 Scope of Delivery • Mill: DYNO-MILL KD 6 base unit • Grinding System: Silicon Carbide (SiSiC) Inner Cylinder & Hardened Stainless Steel Discs • Feed Pump: Peristaltic Pump included • Controls: Original Electric Cabinet included • Grinding Media: Ceramic Beads, Zirconia Partially Stabilized with Yttria, four sizes, each approx. 25Kg (0.4 - 0.6 mm / 0.8 - 1.0 mm / 1.2 - 1.4 mm / 1.6 - 1.8mm) • Documentation: Operating instructions and wiring diagrams Condition • Mechanical: Excellent, running condition with no known faults at the time of decommissioning. • Cosmetic: The machine is clean but shows minor cosmetic wear (see pictures for visual details) • Last application: Food Typical Applications • Ideal for fine particle size reduction in industries such as: • Paints, Inks, and Coatings • Agrochemicals and Chemicals • Life Sciences and Microbiology • Food and cosmetics We ship worldwide. If you are interested or have any questions, please get in touch! Can be inspected in Liestal, Switzerland.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 366 kW (497.62 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,203 kg, input voltage: 400 V, total width: 2,260 mm, total length: 5,300 mm, total height: 2,410 mm, warranty duration: 12 months, heating capacity: 349.9 kW (475.73 HP), Aircooled chiller/Heat pump LENNOX GAH370DP2M 366 kW/349.9 kW Cooling capacity: 366 kW / 104.07 tons (12/7 — 35°C) Heating capacity: 349.9 kW / 99.49 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 6 pcs. Danfoss DSF270A4AAA (scroll) Type of refrigerant: R32 Number of fans: 8 pcs. (EC-fans) Dimensions: 5.3x2.26x2.41 m. Weight: 3203 kg. Working hours: 63/60/76/92/95/92 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. Ndsdpfx Abjx Rbw Esyec WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, cooling capacity: 315 kW (428.28 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,230 kg, input voltage: 400 V, total width: 1,850 mm, total length: 5,600 mm, total height: 2,150 mm, warranty duration: 6 months, heating capacity: 350 kW (475.87 HP), AIRCOOLED CHILLER/HEAT PUMP TRANE CXCM 315 KW Cooling capacity: 315 kW (12/7 — 35°C) Heating capacity: 350 kW (40/45 — 7°C) Year of manufacture: 2017 Options: Heat pump Heat exchanger: Plate Refrigerant circuit: 2 pcs. Compressors: 4 pcs. Danfoss (scroll) Nedpfx Aboh D E R Teyjdc Type of refrigerant: R410A Working hours: 4692-7121 h Dimensions: 5.60 x 1.85 x 2.15 m Weight: 3230 kg Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, load capacity: 10,000 kg, rotational speed (distance/time): 1,000 mm/min, Capacity: 10Tn Type: Self-aligning Minimum diameter: 320 mm Maximum diameter: 2.800 mm Wheel dimensions: 300 x 160 mm (Diameter x Width) Wheel coating: Polyurethane rubber Rotation speed (Min.-Max.): 100 - 1.000 mm/min. Motor power: 1,1 KW Inverter: Danfoss Electrical components: Schneider Included: 1 motor-driven + 1 idler Nsdpjuf A Ahsfx Abyedc Control unit with 6 meter extension pole and digital display with the speed of rotation.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, controller model: PLC Siemens S7, production capacity: 4,000 unit/h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Capacity: 4,000 bottles/hour Dimensions of screw cap: 30 × 10 mm Dimensions of PET bottle (20 ml): 26.05 × 48.38 mm Nedpfxozyihho Abysdc MACHINE DETAILS Control system: PLC Siemens S7 Sorting hopper Height of transport chains: approx. 1,000 mm ± 50 mm Power consumption: 2.5 kW Voltage supply: 380/400 V Fuse rating: 16 A EQUIPMENT Centrifugal cap sorter made of stainless steel AISI 304 with cap level sensor Cap feed chute made of stainless steel AISI 304 with electronic cap jam detector Manual device for removing misaligned caps Pick-and-place system Capping heads with magnetic clutch and cap cone Bottle neck ring centering with spikes Frequency-controlled geared motor Special design of the height adjustment range for handling bottles outside the height adjustment range Anti-rotation device Protective device to cover the bottles Electric height adjustment of the capping head Axially adjustable worm Control cabinet Machine drive via Danfoss VLT 2800 frequency inverter Touch panel for operation FESTO pneumatics Diameter of the feed table: 800 mm Feed table with frequency inverter and separate drive Conveyor extension at the machine inlet: 500 mm Conveyor extension at the machine outlet: 200 mm Sensor control Mechanical cap feeding system with floor-mounted storage container Vertical conveyor made of stainless steel AISI 304 with cap conveyor belt

Condition: excellent (used), Year of construction: 2012, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 2522105, overall weight: 8,000 kg, total length: 4,000 mm, total width: 210 mm, total height: 2,000 mm, ambient temperature (min.): 35 °C, ambient temperature (max.): 35 °C, Mayekawa (MYCOM) N2520LMC-LBM – 490 kW, NH₃, two-stage compressor – only 7000 hours For sale: a Mayekawa (MYCOM) N2520LMC-LBM two-stage compressor, designed for industrial ammonia (NH₃) refrigeration systems. The unit has only operated for approximately 7000 hours. It comes complete with a control cabinet and a Danfoss soft starter. The system is equipped with thermosyphon cooling. Key specifications: Manufacturer: Mayekawa (MYCOM) Model: N2520LMC-LBM Type: two-stage compressor Refrigerant: ammonia (NH₃) Refrigeration capacity: 490 kW Oil cooler capacity: 179 kW Operating parameters: -40°C / +35°C Operating hours: only approximately 7000 hours Cooling: thermosyphon Control cabinet: included Soft starter: Danfoss – included Drive power: the attached documentation shows a drive with a rated power of 315 kW. Advantages of a two-stage compressor: Two-stage compression is particularly beneficial at low evaporation temperatures and high compression ratios. • High efficiency at low temperatures – this solution works very well at temperatures around -40°C. • High refrigeration capacity – 490 kW – the compressor can be used in large, industrial refrigeration systems. • Improved compressor operating conditions – compression takes place in two stages, which means that the individual stages are less stressed than in a single-stage system with a similar total compression ratio. • Lower discharge temperature – two-stage compression allows the discharge temperature to be reduced, which has a positive effect on the system's operation and durability. • Good energy efficiency at high compression – particularly important in systems operating at low temperatures. • Ideal for industrial refrigeration – including freezers, cold rooms, food processing plants, cold storage warehouses, and technological installations. Njdpfezudabex Abyodc Included: The set for sale includes: Mayekawa (MYCOM) N2520LMC-LBM compressor, control cabinet, Danfoss soft starter, oil cooling system using a thermosyphon. Only 7000 operating hours: One of the biggest advantages of the unit is its very low operating time – approximately 7000 hours. The compressor offers 490 kW of refrigeration capacity and is ready to operate with NH₃ in demanding industrial conditions. Mayekawa (MYCOM) N2520LMC-LBM | 490 kW | NH₃ | -40/+35°C | 7000 hours | thermosyphon cooling | oil cooler 179 kW | control cabinet | Danfoss soft starter Please contact me for details, technical documentation, photos, and the possibility to view the unit.

Condition: excellent (used), KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE TYPE: 600 U YEAR OF MANUFACTURE: 2003 PARTIAL OVERHAUL: 2026 (Technical data see attached documents) Center height: 175 mm (without height adjustment) Grinding length: 600 mm Equipment: - Standard accessories - Internal grinding device for D: 80 mm max. incl. coolant supply through the workpiece spindle - Grinding wheel equipment left for D: 400 x 50 x 127 mm (standard) Ndjdpfxjzhma Ds Abyjc - Grinding wheel equipment right for D: 300 x 40 x 127 - Grinding wheel flange for wheels D: 400 x 50 x 127 mm (left) and D: 300 x 40 x 127 (right), balancing weights outside (3 pieces left, 2 pieces right) - Variable spindle drive with Danfoss frequency converter - Balancing device for dynamic balancing, type ELASO MANOBALANCE 750/EB 2000 - RENAUD internal grinding spindle type REN 828 (grease-lubricated with compressed air lock) - Various internal grinding mandrels for REN 828 – 1235, 1645, 2060, 2575 (4 pieces) - Various chucks HJNZ 28 for HJN 828 with 2 collets D: 3 mm and D: 6 mm - Tailstock standard MK 5 with adapter flange DIN 55027 size 5” Bore D: 38.2 mm (standard) - Sine bar on the tailstock - Tailstock with manual retraction for quill travel - Micrometer adjustment on the tailstock - Pneumatic relief of the tailstock - FORKARDT planetary three-jaw chuck D: 200 mm - REISHAUER wedge-bar three-jaw chuck D: 160 mm - Permanent magnet chuck D: 200 mm - Collet chuck for Schaublin B32 - Set of 59 collets Schaublin B32, D: 1.0 – 30.0 mm, graduation 0.5 mm - Set of 8 workpiece supports incl. holder - Three-jaw steady rest, 175 mm, foldable, D: 3-120 mm - Swiveling dressing tool for dressing during external, surface or internal grinding - Side and angled dressing tool for side and angled dressing of the grinding wheels - Dial indicator stop for table swiveling with dial indicator 1/100 mm - Dial indicator stop for table longitudinal movement with dial indicator 1/100 mm - Dressing stop for internal grinding - HEIDENHAIN Digital length measuring system for the X and Z axes - STREULI paper band filter SPB 3, 90 l/min at 0.26 bar, tank volume 240 l - WALDMANN machine lamp - Set of vibration-damping pads - Three-color paint finish (light gray RAL 7035/blue RAL 5012/dark gray RAL 7016) - New acceptance test report according to KELLENBERGER standard - CE conformity - Documentation Condition: very good, machine geometrically and mechanically overhauled (see geometry report)

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning system, rotary airlock, silencer, frequency converter, control cabinet/controller, and extensive ductwork. The dust extraction system was operated inside the production hall, and the filtered return air was returned to the production area. The filter system has an H1 rating and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial number: 000909 Volume flow rate: 10,500 m³/h Filter area: 62.5 m² Weight of filter system: approx. 1,600 kg Filtration: Surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter housing: approx. 2,600 mm H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is rated separately with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency converter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. Nsdpfxez Ikzpo Abyjdc The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of vanes: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Delivery rate: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: Included with the system: - Silencer, connection Ø 400 mm - Return air ducting to the production hall - Complete system control - Danfoss frequency converter - Automatic pneumatic filter cleaning - Rotary airlock - Extensive galvanized dust extraction and return air ducting Large parts of the existing ductwork can be taken over after consultation. The system is still in its assembled condition. This allows the layout, duct routing, and existing components to be inspected and documented before purchase. Location / Sale: Location: 3608 Thun, Switzerland Available: immediately Dismantling no later than: 07/31/2027 The system will be sold in its currently assembled condition. Dismantling, removal, loading, and transportation will be carried out entirely by the buyer at their own expense and responsibility. In the event of a sale to a foreign country, transportation, export/import, and customs duties will also be borne by the buyer. Inspection possible by appointment. Sold as is, without warranty. Selling price: 12,500.00 EUR Price net, any applicable taxes and duties will be added. Export, customs duties and import duties are the responsibility of the buyer.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 137 kW (186.27 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,795 kg, input voltage: 400 V, total width: 2,020 mm, total length: 3,800 mm, total height: 1,970 mm, warranty duration: 12 months, heating capacity: 154 kW (209.38 HP), Aircooled chiller/Heat pump GALLETTI MLE144PS2A 137 kW/154 kW Cooling capacity: 137 kW / 38.96 tons (12/7 — 35°C) Heating capacity: 154 kW / 43.79 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump. Hydraulic module. 4-pipe system. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Danfoss DSH161A4ALD (scroll, soft starter) Type of refrigerant: R454B Number of fans: 4 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump EBARA 3M40-125/2.2-Q7AE-NEDN Dimensions: 3.8x2.02x1.97 m. Weight: 1795 kg. Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Ndjdpfoy H Dhlox Abysc Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, functionality: fully functional, power: 18.2 kW (24.75 HP), gearing type: hydrostat, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 15 l, color: blue, operation weight: 1,825 kg, lifting power: 600 kg/m, lifting height: 3,380 mm, tire condition: 100 %, drive condition: 100 %, axle configuration: 4x4, number of seats: 1, emission class: euro5, mast type: other, shovel volume: 0.23 m³, Year of construction: 2026, operating hours: 3 h, Equipment: additional headlights, all wheel drive, head guard, hydraulics, pallet forks, standard shovel, trailer coupling, Last Available RL06 Pro Telescopic Wheel Loader! Includes standard bucket at a special price of €15,000 net + 19% VAT (€17,850) including delivery in Germany. Next delivery: January 27th. With all-wheel drive, oscillating axle, and articulated steering. Performance & Drive: Engine: Kubota D1105 (3-cylinder diesel, water-cooled) Power: 23.3 hp Emissions standard: Stage V, Tier 4F / EURO 5 Travel speed: 0 - 8 km/h Tires: Off-road tires for improved traction Ndodoyzbdtepfx Abyoc Drive system: Hengli hydraulic pump 66L/min with Danfoss BMR-315 hydraulic travel motor Work pump: Tianjin Mafeng // 42L/min Diesel tank: 15L Hydraulic tank: 26L Operating weight: 1,800 kg Safe working load (rated load): 300 kg Maximum lifting capacity: 600 kg Maximum loading height: 2,350 mm Maximum dumping height: 2,060 mm Operation: One-hand multifunction joystick for forward/reverse and lifting arm Dimensions, standard version without telescope: Overall length including bucket = 3800mm Wheelbase = 1280mm Width including bucket = 1160mm Height = 2270mm Bucket dump height = 2060mm Height, top edge of bucket = 2380mm Additional features of the telescopic version: 750mm telescopic cylinder as lifting arm Height, bottom edge of bucket = 3000mm Height, top edge of bucket = 4260mm Equipment & Safety (included): Quick coupler for tool-free changing of attachments Standard earth bucket (0.23 m³) Operator's protective roof with ROPS (roll-over protection) and FOPS (falling object protection) Suspended seat with seatbelt and side protection bars LED work lights and rotating beacon CE certification Prices & Model Variants: Standard version: €13,500.00 net plus 19% VAT (€16,065.00 gross) Version with telescopic arm: €15,500 net plus 19% VAT (€18,445 gross). You will receive a proper invoice with VAT shown. Warranty: 2-year manufacturer's warranty on spare parts. Attachment: Pallet fork for RL06 = €400 net plus 19% VAT (€476 gross) Complete service set (all filters, including hydraulic filter) = €100 net plus 19% VAT (€119 gross) Location: 76332 Bad Herrenalb