Used Dürr Mpdk X20 for sale (820)

Condition: new, functionality: fully functional, machine/vehicle number: NEW-23, empty load weight: 642 kg, maximum load weight: 2,058 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,040 mm, loading space height: 350 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS PL 406 204 2700 2 + integrated loading ramps NEW VEHICLE Internal dimensions: 406cm x 204cm Side board height: 35cm Loading area height: 66cm Total weight: 2100Kg Payload: 2113Kg braked tandem trailer overrun brake and handbrake by KNOTT 2x 1350 Kg axle with brake and automatic reversing system low chassis fully welded, hot-dip galvanized steel frame integrated aluminum loading ramps in ramp compartment, 2.8T load capacity 35cm aluminum profile side boards with tensioning fastener foldable and removable on all sides 15mm thick, non-slip and robust screen-printed wood floor Dcjdezxxkijpfx Adhon automatic jockey wheel with 400Kg support load 8 noise-reducing lashing eyes with 800Kg tensile force reinforced 13" C tire with steel valve M+S tires net/rope hook on the frame 13-pin connector LED marker lights at the front rear lamps with reversing light and triangular reflector OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side boards (price reduction) -rope winch AL-KO 12.5m -Black Edition (powder-coated side boards and rims in black) -steel plate on floor panel -complete LED lighting -theft protection -net, fine or coarse mesh -H-frame -leaf guard in various heights, also closed -extension side boards 30cm with tensioning fastener -flat cover with or without bow -high cover 180cm or 200cm further accessories on request! plus freight to Gera and vehicle registration certificate 200 € net Images are for illustrative purposes and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate collection. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: good (used), machine/vehicle number: 12251, Year of construction: 2014, operating hours: 14,181 h, load capacity: 2,000 kg, lifting height: 5,080 mm, free lift: 1,605 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, fork length: 1,200 mm, front tire size: 200/50-10, rear tire size: 140/50-9, overall weight: 3,864 kg, Equipment: 3rd hydraulic function, 5230970 Dedpfxszp Tmas Adhecn Serial Number: 516215E00002

Condition: good (used), machine/vehicle number: 17356, Year of construction: 2017, operating hours: 9,058 h, load capacity: 1,600 kg, lifting height: 5,220 mm, free lift: 1,700 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,260 mm, fork length: 1,200 mm, front tire size: 180/70-8, rear tire size: 150/25-8, overall weight: 3,188 kg, Equipment: 3rd hydraulic function, 5274220 Dedpfjzzt Tksx Adhecn Serial Number: 51621H00050

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits Djdewiatiopfx Adhocn No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: new, Year of construction: 2026, Top quality made from high-strength structural steel Q355, including plasma nitriding and calibration. 3D perforated table 4000 x 2000 x 200mm, 100mm grid, plate thickness 20mm, hole diameter 28mm. Surface finish machined, very robust, weight approx. 2400 kg. With table base, adjustable in 8 positions. Price excludes accessory set, surcharge €500. Packed in a wooden crate, shipping on request. The stated price refers to the table in standard version without plasma nitriding (last 4 pictures). Price for high-strength steel Q355, stainless and impact-resistant including plasma nitriding: surcharge €1800 (as shown). Dcjdpeyg Ex Djfx Adhon

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight 2400 kg Manufacturer: GERD WOLFF Technical Details: • Length 4000 mm • Width 2000 mm • Height 200 mm • Weight 2400 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: Dsdpfxsymf H Uj Adhecn • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: used, Year of construction: 2016, operating hours: 1,704 h, lifting height: 4,300 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Still RX20-14 electric forklift, year of manufacture: 2016, only 1,704 operating hours, previous owner: German Armed Forces. Battery: 45/2022, rated load capacity: 1,400 kg, fork length: 1,200 mm, lift height: 4,300 mm, triplex mast, hydraulic sideshift, motor: [11kW/15hp], scale with printer, weight: 3,080 kg, in very good condition, immediately ready for use! On request, we can provide you with a leasing or financing offer. Mr. Mihm (phone) will be pleased to assist you. For further information, please visit our website. Subject to errors and prior sale. Dcjdpfx Adoy Ttlmohon Power steering, cab, rental possible. = Further information = Lifting capacity: 1,400 kg Overall height: 200 cm Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2016, operating hours: 1,212 h, lifting height: 4,300 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Still RX20-14 electric forklift, year of manufacture: 2016, operating hours: only 1,212 h! Previous owner: German Armed Forces, rated capacity: 1,400 kg, fork length: 1,200 mm, lifting height: 4,300 mm, triplex mast, hydraulic side shift, engine: [9 kW/12 HP], weight: 3,191 kg, in very good condition, immediately available for use. Power steering, cabin. Dcjdoy Ttkcspfx Adhsn We are happy to provide a leasing or financing offer upon request. Mr. Mihm (tel.) will be pleased to assist you. For further details, please visit our website. Subject to error and prior sale! = More information = Lifting capacity: 1,400 kg Overall height: 200 cm For more information, please contact Tobias Ebert.

Condition: ready for operation (used), CNC Lathe TAKAMAZ EX 20 / Fanuc 15 TF - Control: FANUC 15 TF - Max. turning diameter: 260 mm - Turning length: approx. 500 mm - Bar capacity: 42 mm - Spindle speeds: 40 - 4000 rpm - Spindle nose: A2-6 - Tool positions (stations): 12-fold / direct mount - Tool measurement (Tooleye) - Parts catcher - Tailstock - Collet chuck: 173 E - Spindle motor: 7.5 kW Dcsdpfx Adeztycvehsn Dimensions (LxWxH): 2.6 x 2 x 1.8 meters / Weight: 2,800 kg Errors and omissions excepted.

Year of construction: 1988, condition: excellent (used), Manufacturer: Beck Max. throughput: 660x180mm Max. temperature: ca 300 °C Stepless speed adjustment, forward/reverse. 400V, 50Hz, 28A Dodpsmv Hy Hsfx Adhecn Enclosure dimensions: 2500 x 1100 x 1500 mm (LxWxH)

Condition: used, Pneumatic tilting roller table 1500x2000x900mm Pneumatically tiltable roller table, stand. Size: 1500 x 200 x 900mm Dodpfx Adjuglrzohecn The height of the table in the open state: 1850 mm

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, drying oven, tempering oven Caltherm 150 C For sale in excellent condition CALTHERM manufactured air mixing multi-purpose Convection oven heat treatment oven electric heated oven with one chamber, air mixing Dcjdpfxsvpagde Adhsn Max temp: 150°C internal dimensions: length: 200cm height: 200cm width: 100cm electronic heating elements 8pcs air circulation fan: 4kw 380v 50Hz temperature range: 50-160 Celsius external dimensions:

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 14,633 h, load capacity: 1,800 kg, lifting height: 4,700 mm, free lift: 1,450 mm, fuel type: electric, mast type: triplex, construction height: 2,180 mm, battery capacity: 775 Ah, battery voltage: 48 V, fork length: 1,600 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 16 x 6 - 8, overall weight: 3,710 kg, total height: 2,180 mm, total length: 2,140 mm, total width: 1,150 mm, fuel: electricity, Equipment: cabin, STILL RX 20-18 PH – Electric 4-wheel forklift TECHNICAL DATA Lifting capacity: 1.800 kg Lifting height: 4.700 mm Closed height: 2.180 mm Free lift: 1.450 mm Mast: Triplex (3F470) Fork length: 1.600 mm Fork carriage: FEM 2A Drive: Elektro 48V Battery: 48 V 775 Ah v. 2016 Charger: ohne/without Tyres: Superelastik SE 200/50 - 10 (80%) / 16 x 6 - 8 (80%) Service weight: 3.710 kg Length: 2.140 mm Width: 1.150 mm Year of manufacture: 2016 Operating hours: 14.633 h Condition: working condition Dsdjz Aqb Ujpfx Adhscn EQUIPMENT 3rd valve, Rear work lights, Front work lights, Heating, Full cabin, Pulse control Internal no.: 1309262 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, Year of construction: 2007, MAZAK TURNING CENTRE TYPE INTEGREX 200 IV S - 1000 mm The machine is supplied in standard configuration and equipped with the following options: - Through‑spindle coolant 15 bar - Synchronized tapping with milling spindle - Cylindrical interpolation and polar coordinates - 40‑tool magazine Capto C6 Djdezuy Tdopfx Adhscn - Preparation for visual tool (visual tool probe) - Form/geometry compensation for rotary axes - 3D coordinate conversion - Management of rapid traverses - Preparation for flash tool (tool‑change flash tooling) - Simultaneous 5‑axis functions - Tool pivot point management - 5‑axis tool radius compensation - Part catcher (automatic part collector) - Double clamp pressure on the secondary spindle - Overload detector Maximum swing 660mm Swing over cross slide 660mm Swing during Y-axis process 660 to 500mm Maximum machining diameter 660mm Through-hole diameter 76mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, operating hours: 11,415 h, load capacity: 1,600 kg, lifting height: 4,610 mm, free lift: 1,440 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, battery capacity: 550 Ah, battery voltage: 48 V, fork length: 1,200 mm, tire condition: 70 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,237 kg, total height: 2,060 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-16 / 6211 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.600 kg Lifting height: 4.610 mm Closed height: 2.060 mm Free lift: 1.440 mm Mast: Triplex (3F461) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro Battery: 48 V 550 Ah v. 2016 Charger: 48 v 140 A not tested Tyres: Superelastik SE 18 x 7 - 8 (70%) / 15 x 4,5 - 8 (80%) Service weight: 3.237 kg Year of manufacture: 2016 Operating hours: 11.415 h Condition: working condition EQUIPMENT 3rd valve, Overhead guard cover, Front windscreen, Load backrest, Pulse control ATTACHMENTS Load backrest, Sideshift Dcsdpfx Asz Apqhodhen Internal no.: 1308673 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 7,931 h, load capacity: 1,400 kg, lifting height: 3,340 mm, free lift: 1,600 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,600 mm, tire condition: 40 %, front tire type: superelastic tires (black), front tire size: 18 x 7 - 8, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 2,931 kg, total height: 2,160 mm, total length: 1,950 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-14 / 6209 – Electric 3-wheel forklift TECHNICAL DATA Dcedpfsz App Rex Adhsn Lifting capacity: 1.400 kg Lifting height: 3.340 mm Closed height: 2.160 mm Free lift: 1.600 mm Mast: Duplex (2F334) Fork length: 1.600 mm Fork carriage: 2A Drive: Elektro Battery: 48 V 625 Ah v. 2017 Charger: ohne/without Tyres: Superelastik SE 18 x 7 - 8 (40%) / 15 x 4,5 - 8 (20%) Service weight: 2.931 kg Length: 1.950 mm Width: 1.100 mm Year of manufacture: 2017 Operating hours: 7.931 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Front work lights, Overhead guard cover, Front windscreen, Pulse control ATTACHMENTS Sideshift, Fork positioner Internal no.: 1308867 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 7,254 h, load capacity: 1,400 kg, lifting height: 3,380 mm, free lift: 1,580 mm, fuel type: electric, mast type: duplex, construction height: 2,160 mm, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,600 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 18x7-8, rear tire type: superelastic tires (black), rear tire size: 15x4,5-8, overall weight: 3,100 kg, total height: 2,160 mm, total length: 2,050 mm, total width: 1,100 mm, fuel: electricity, Equipment: sideshift, STILL RX 20-14 / 6209 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 1.400 kg Lifting height: 3.380 mm Closed height: 2.160 mm Free lift: 1.580 mm Mast: Duplex (2F338) Fork length: 1.600 mm Fork carriage: FEM 2A Dcjdpfx Aoz App Dodhjn Drive: Elektro Battery: 48 V/625 Ah (2017) Charger: ohne/without Tyres: Superelastik 18x7-8 (80 %) / 15x4,5-8 (60 %) Service weight: 3.100 kg Length: 2.050 mm Width: 1.100 mm Year of manufacture: 2017 Operating hours: 7.254 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Front work lights, Overhead guard cover, Front windscreen ATTACHMENTS Sideshift, Fork positioner Internal no.: 1308869 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 15,600 h, functionality: fully functional, machine/vehicle number: 216615, turning length: 995 mm, turning diameter over cross slide: 660 mm, turning diameter: 660 mm, spindle motor power: 22 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, milling spindle length: 30 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 35 rpm, feed length X-axis: 580 mm, feed length Y-axis: 160 mm, feed length Z-axis: 1,045 mm, torque: 468 Nm, bar passage: 76 mm, total height: 2,500 mm, total length: 7,000 mm, total width: 2,000 mm, distance table center to spindle nose: 1,234 mm, overall weight: 9,760 kg, spindle diameter: 76 mm, feed force X-axis: 38 N, feed force Y-axis: 26 N, feed force Z-axis: 38 N, Equipment: documentation/manual, rotational speed infinitely variable, MAZAK INTEGREX 200-IV / 200-IVS Chuck size: 8 inches Max. swing diameter: Ø 660 mm Dcodpfx Aez A Huhjdhon Max. machining diameter: Ø 660 mm Max. machining length: 995 mm Max. bar capacity: up to Ø 65 mm Main spindle: Spindle speed: 35–5,000 rpm Main spindle motor power: 22 kW Spindle bore diameter: Ø 76 mm Milling spindle: Spindle speed: 15–12,000 rpm Milling spindle motor power: 18.5 kW Max. torque of the milling spindle: 119 Nm Max. milling tool size: Ø 125 × 300 mm Travel ranges: X-axis: 580 mm Z-axis: 1,045 mm Y-axis: 160 mm

Condition: new, Year of construction: 2026, CORMAK 560 × 2000 Universal Conventional Lathe The CORMAK 560 × 2000 is a heavy-duty universal metal lathe designed for professional applications in machine shops, toolrooms, maintenance departments, and industrial manufacturing facilities. Its robust cast iron construction, large turning capacity, and 103 mm spindle bore enable efficient machining of a wide variety of workpieces. Key Features Electromagnetic foot brake ensures maximum operator safety and minimizes downtime by providing rapid, reliable machine stopping. Hardened and precision-ground bed offers excellent rigidity and long-term resistance to wear and deformation. Heavy-duty cast iron machine frame absorbs vibration and improves machining accuracy. Rapid longitudinal and cross feeds increase machining efficiency and reduce cycle times. Precision spindle supported by high-quality ball bearings ensures smooth operation and extended service life. 103 mm spindle bore allows machining of long and large-diameter workpieces. 3-axis Digital Readout (DRO) provides precise positioning and improves machining accuracy. Construction and Technology The CORMAK 560 × 2000 has been engineered for intensive industrial machining. Its 350 mm wide induction-hardened bed and precision-machined slideways provide outstanding rigidity and repeatability. The machine features an ergonomic control panel, a clearly arranged spindle speed and thread selection chart, and a rapid traverse system that increases operator productivity. The headstock is equipped with a Camlock D1-8 spindle nose, allowing fast, accurate, and secure chuck mounting while maintaining excellent spindle rigidity. Machining Capabilities The machine is capable of performing a wide range of machining operations, including: Rough and finish turning Metric, imperial, module, and DP thread cutting Drilling and boring Taper turning Facing operations With a 560 mm swing over the bed and an impressive 785 mm swing over the gap, the CORMAK 560 × 2000 is particularly well suited for machining large and heavy workpieces while maintaining excellent dimensional accuracy and surface finish. Technical Specifications Distance Between Centres 2,000 mm Centre Height 280 mm Swing Over Bed 560 mm Dcjdpfx Ajzqzxmsdhjn Swing Over Gap 785 mm Swing Over Cross Slide 355 mm Bed Width 350 mm Spindle Bore 103 mm Spindle Nose Camlock D1-8 Spindle Speeds 12 speeds, 25–1,600 rpm Maximum Tool Size 25 × 25 mm Longitudinal Feed Range 35 feeds, 0.059–1.64 mm/rev Cross Feed Range 35 feeds, 0.020–0.573 mm/rev Metric Thread Range 47 pitches, 0.2–14 mm Imperial Thread Range 60 pitches, 2–112 TPI Module Thread Range 39 pitches, 0.1–7 Module Diametral Pitch Thread Range 50 pitches, 4–112 DP Tailstock Quill Diameter 75 mm Tailstock Quill Travel 180 mm Tailstock Taper MT5 Main Motor (S1/S6) 7.5 / 9.0 kW (10 HP) Coolant Pump Motor 0.1 kW Machine Dimensions 3340 × 1150 × 1460 mm Weight 2,940 kg Standard Equipment 315 mm 3-jaw self-centering chuck (PO3-315 / D8) 350 mm 4-jaw independent chuck (K72-350 / D8) Service tool kit 450 mm faceplate Fixed steady rest (capacity up to Ø180 mm) Travelling steady rest (capacity up to Ø120 mm) Two dead centres CE-compliant electromagnetic foot brake Electromechanical spindle brake Filled with Shell Tellus 46 hydraulic oil Rapid traverse system Coolant system Halogen work light Change gears Chip tray 3-axis Digital Readout (DRO)

Condition: good (used), Year of construction: 2004, TURNING AND MILLING CENTER MAZAK INTEGREX 200 IV ST Dedpfxoiz Tmgo Adhocn THE MACHINE IS IN GOOD CONDITION, VISIBLE AT OUR WAREHOUSE IN VILLORBA 20 TOOLS AND HIGH PRESSURE SYSTEM 20 BAR Producer MAZAK Model INTEGREX 200 IV S Year 2007 Used condition Location Treviso, Italy Price Category Multitasking Machines Subcategories Stock number 633 Serial number 216700 Matrix governing unit Maximum workable length 1050 mm Maximum workable diameter 660 Bar passage 51 Main spindle diameter 210 Main spindle power and revolutions 22 KW 5000 rpm C axis 360° Counter spindle chuck diameter 210 Counterspindle power and revolutions 18.5 KW 5000 Rpm C axis on the 555 counter spindle X-axis (travel) 580 Y axis (strokes) 160 Z axis (strokes) 1050 B axis (strokes) 225° Milling spindle power 18.5 kW Milling spindle speed 12,000 rpm CAPTO C6 spindle mount Maximum warehouse capacity 20 UT High pressure system through the spindle 20 BAR Chip conveyor Si carpet

Condition: new, functionality: fully functional, empty load weight: 826 kg, maximum load weight: 2,674 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,685 mm, loading space width: 2,090 mm, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Tilting Trailer 480 3 3.5T NEW VEHICLE NEW SERIES Internal dimensions: 468.5cm x 209cm Total weight: 3500Kg Payload: 2674Kg Braked tri-axle trailer Overrun brake and handbrake by AL-KO 3x 1350Kg axles and brake with automatic reversing function Low chassis Fully welded, hot-dip galvanized steel frame Loading platform hydraulically tilting 11-degree approach angle No ramps required Ramp steel loading strip with aluminum panels Automatic jockey wheel with 400Kg support load Numerous lashing eyes along the entire length Reinforced 10" C tires with steel valve M+S tires 13-pin connector Side marker lights at the front Rear lights with reversing light, NSL, and triangular reflectors Lights and license plate holder are foldable Rope winch with brake and mounting bracket 2x wheel chocks OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICE STARTING IN FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Complete LED lighting -Theft protection -Full aluminum floor made of Alupanel panels -Aluminum floor with wooden support -Anti-sway hitch -2 wheel stoppers for ramp steel loading strip -Wheel stopper across the entire width -Aluminum rims More accessories available upon request! Plus freight to Gera and vehicle registration document 400 € net Pictures are for illustrative purposes and may show optional accessories that incur extra costs. Dedpfx Adoztbvkohocn Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravan trailers. In addition, we have a large selection of spare parts and accessories, also for trailers from various manufacturers. You will also find a wide range of rental trailers with us. Visit us online or come directly to our location.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,560 h, load capacity: 1,600 kg, lifting height: 4,950 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, empty load weight: 3,400 kg, total length: 2,114 mm, drive type: Elektro, construction width: 1,100 mm, Electric 4-wheel forklift Load centre: 500 Mast type: Triplex Dcedpfx Aow U E Uujdhsn Speed class: 20 Condition: Ready for use and fully functional Technical condition: normal Front tyre type: Non Marking Front tyre condition: 60 - 80% Rear tyre type: Non Marking Rear tyre condition: 60 - 80% Battery voltage: 48V Battery capacity: 625Ah Battery type: PzS Sideshift, 3rd valve, rear work light, front work light,

Condition: used, machine/vehicle number: 516223L00150, Year of construction: 2022, operating hours: 828 h, load capacity: 1,800 kg, lifting height: 5,400 mm, fuel type: electric, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,800 kg Lifting height: 5,400 mm Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex Drive type: Electric Battery voltage: 48 V Battery capacity: 625 Ah Battery voltage in idle state: 50.1 V Service valid until: 09/2027 UVV (German accident prevention regulation) valid until: 09/2027 Dsdoz Dfn Njpfx Adhecn Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,200 x 2,400 mm Own weight: 3,400 kg Operating hours according to display: 828 h EQUIPMENT Former Still full-service unit Free lift 3rd valve Side shifter White, non-marking tires LED work light, front LED work light, rear Safety light, front Safety light, rear Comfort seat High-frequency charger, year of manufacture 2026 All dimensions are rounded values. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 93

Year of construction: 2023, condition: ready for operation (used), An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling system, various grippers and gripper pairs, IoT, and management and monitoring software. This machine was never put into operation and is therefore in as-new condition. Documentation available. An on-site inspection is possible. Dcodpfozkvkqox Adhon

Condition: ready for operation (used), Turning diameter over bed/cross slide: 530mm/280mm, center height: 264mm, center width: 2000mm, bed width: 370mm, speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: mm. The machine has an electrical problem on the tool head. Documentation available. On-site inspection is possible. Dcjdpfx Ajv Amrtjdhen