Used Cutlite Penta Plus Lm 9030 for sale (6,497)

Condition: ready for operation (used), Year of construction: 2024, workpiece length (max.): 750 mm, workpiece width (max.): 530 mm, workpiece height (max.): 6 mm, The machine has already been dismantled by a specialist company and placed in storage. TECHNICAL DETAILS Punching width max.: 530 mm Punching length max.: 750 mm Material thickness max.: 6 mm EQUIPMENT PC workstation DZDV-PC-TOUCHSCREEN PC 32" 9970460-20 incl. console Hot foil stamping/embossing system SLEEKING System HAK 100/Brother Dkedpfxjzb Iihs Aa Isu Note: Accessories are sold as is, without warranty. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: used, Year of construction: 2019, operating hours: 5,532 h, Equipment: ABS, all wheel drive, soot filter, Finished SD2500WS PLUS T4F* weather protection canopy * Air conditioning * Seat heating * Auxiliary heater * Leveling system/cross-slope control * Automatic centralized lubrication system for paver and/or screed * Infinitely variable hydrostatic drive * Front axle is a tandem swing axle * Diesel engine Cummins QSB 6.7 - EUIV(T4f) * All-wheel drive (2 x rear wheels + 4 x front wheels) * Pave Manager 2.0 Advanced * PLC electrical system (CAN bus), ECO mode, 24 V electrical system * Wheel track stone deflector * Mixing material hopper with individual control * Hydraulic front hopper * Support rollers with shock absorption * Reversible slat conveyor with double bars and individual control of conveyor belt halves * Automatic shutdown via mechanical paddles * Hydraulic screw conveyor with height scale * Two reversible screw halves (380 mm) * Ultrasonic sensors in the screw conveyor * Hydraulic screed locking * Side-mounted operator station with weather protection canopy * Variable control panel with push buttons and 7" multifunction display * Two heated Grammer comfort seats * Four LED headlights (2 x front + 2 x rear) * Dynalink Advanced - Telematics system * Hydraulic system for Pave Manager Adv. * SD2500WS THERMO with LightAssist (Paver) ----Vario screed V 5100 TV PM+* Vario screed with gas heating * Basic width 2.55 m, hydraulically extendable to 5.1 m * Compaction system: tamper and vibration * Bottom plate Hardox 500 Dodoy T Ukdspfx Aa Isku * Hydraulic adjustment of roof profiles * Two external controls incl. leveling electronics * Leveling system Mobamatic 2+1 * FRONT WHEEL DRIVE CAN BE ACTIVATED FOR WORK ----Additional equipment and accessories* Screw 380 mm 4.42 m * Connection kit V5100/6000 * Rotating beacon * Fire extinguisher * First aid kit * Smoke extraction system * RESTRICTED SD2500WS THERMO * Hydraulic system for Pave Manager Adv. * LightAssist (Paver) * Lighting for screw conveyor * LED headlights screed left + right * 12V socket * TEMPERATURE MEASUREMENT SCREW CONVEYOR * Spray system 25L with hose * High-performance front-wheel drive * Tool set * SetAssist (Transport position) * TRUCKASSIST ADVANCED * Thermomaterial hopper * Folding material guide * Weather protection house * Hydraulic oil drain hose * STVZO - Lift axle * Infrared temperature measurement preparation * Operating manual + parts list (USB) * Operating manual * Parts list * Set of drawings A3 * Leveling system Mobamatic 2+1 * Vario screed V 5100 TV PM+ * Side guards OBT approved (G) PM * Spirit level screed * Holder for cross-slope Moba * Holder for height sensor MobaGrade 1x * Screed width measurement * LightAssist (Screed) * DYNAPLUS12 ----Vehicle number 12111 Errors and prior sale excepted.

Year of construction: 2018, condition: used, Operational machine with maintenance history. Dodpfxjyxfzko Aa Ieku Ask for additional information!

Condition: excellent (used), Year of construction: 2011, BATTENFELD 35/75 PLUS INJECTION MOLDING MACHINE Technical specifications: Year of manufacture: 2011 Operating hours: 89,192 h Clamping force: 350 kN Injection volume: 25.4 cm³ Injection shot weight: approx. 23–27 g PS Screw diameter: 18 mm Maximum mold opening stroke: 200 mm Column spacing: 270 x 260 mm Platen dimensions: 470 x 280 mm Minimum mold height: 150 mm Dkjdpfxoy Uk Axj Aa Iju Centering hole diameter: 110 mm Maximum injection pressure: 2034 bar Hydraulic oil volume: 125 dm³ Total power: 28 kW Machine weight: 1050 kg Machine type: hydraulic Control system: BATTENFELD UNILOG B2 The machine is in very good technical and visual condition. A larger number of machines in the same configuration are available – a total of 12 units manufactured in 2010–2011.

Condition: used, mileage: 45,969 km, power: 103 kW (140.04 HP), first registration: 09/2020, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2026, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 6, Year of construction: 2020, Equipment: ABS, central locking, electronic stability program (ESP), parking heater, soot filter, Equipment: * Body/Superstructure: Panel van, double cab L2H1, * Auxiliary heater with remote control, * Passenger-side double seat with storage/compartment, * Seats in the cargo area: 1st row, 3-seater bench, * Storage Package 2, * Rear hinged doors, 270 degrees with glazing, * Rear step on the right-hand side, * Rear glazing tinted, * Cargo area partition behind the 2nd row of seats, * Sliding door on the right-hand side with intermediate locking, Dkedpfx Aajzpcn Tj Iou * Tow hitch, 3,000 kg, Technology: * Audio system Composition Audio, * SD card, MP3, Bluetools, * 2nd battery, * Marker lights on the side, * Multi-function display Plus, Safety/Environment: * Airbag, driver's side, * Driver assistance system: Hill start assist, * Driver assistance system: Crosswind assist, * Low emissions according to Euro 6d-TEMP emission standard, * Start/Stop system for the engine, Other: * 1 previous owner, * Originally delivered in Germany, * Truck registration, * Engine 2.0 L - 103 kW TDI, * Wheelbase 3640 mm, * Permissible total weight 3.50 t, Please note: This VW does NOT have air conditioning! Since 1972, we have been your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim, near the Bremen interchange. Behnke Commercial Vehicle Center always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We continuously offer attractive financing options at favorable special conditions. If you are interested, we will gladly prepare an individual offer for you! We would be happy to accept your commercial vehicle/construction machinery in part exchange. If you would like a new TÜV (German technical inspection) inspection, we will gladly provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. The delivery of your "new" commercial vehicle is possible through our external partners for an additional cost. The information provided in advertisements, on the internet, price tags, and in images is non-binding and does not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are reserved.

Condition: used, mileage: 1,545 km, power: 368 kW (500.34 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, ADR hazardous goods Coupling height: 1150 mm FROZEN WHITE - 7VTAWWA Retarder 4-bag air suspension, maintenance-free fifth wheel, FDR 2.31, ADR hazardous goods, sun visor, LED, retarder, upper bed, technology package 5 Cab paint: Frozen White Fixed co-driver's seat Without upper bed Warm air auxiliary heater Navigation system Electrohydraulic steering with three driving modes (Comfort, Balance, Direct) Wheelbase 3750 mm ADR 4-bag air suspension (rear axle) Bright dashboard Window film, 4-bag air suspension, 980 mm, LowLiner, 355/50, FDR 2.31, winter package with heated windscreen, sun visor, LED, retarder, air pressure horn, technology package 5 F-MAX F-MAX LL F-MAX L Wheelbase 3600 Fifth wheel height 980 Front overhang 1450 Rear overhang 873 Total length 5907 Total cab length 2350 Overall height 3950 Overall width (without mirrors) 2540 - 2160 78 LITER SCR TANK Fuel tank 372 liters 600 LITER MAIN TANK Ground clearance front 269 Ground clearance rear 243 ConnecTruck Cruise control Lane keeping assist Emergency brake assist Axle load indicator Electronic Stability Program (ESP) Traction control (ASR) Eco Roll Differential lock Driver's seat (premium upholstery) Auxiliary heater ConnecTruck MaxCruise (predictive cruise control) Electric cab tilt mechanism LED daytime running lights Maneuvering assistance lighting Fog lights and rear fog lights Light automation Leather steering wheel Steering wheel controls 8" instrument panel Multimedia system with 7.2" touchscreen External sun visor Roof spoiler Side spoiler Side skirts In-vehicle internet Dksdpfeyvm Ndsx Aa Ieu

Condition: used, mileage: 1,545 km, power: 368 kW (500.34 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Mega - Ultra LowLiner Saddle height: 980 mm FROZEN WHITE - 7VTAWWA Retarder CB radio pre-installation, sun visor, LED, retarder, air horn, Technology Package 4 Cab paint: Moondust Silver Passenger seat fixed Without upper bunk Warm air parking heater Navigation system Electrohydraulic steering with three driving modes (Comfort, Balance, Direct) SAF fifth wheel, saddle height 980 mm, tires 295/60 R22.5, Bridgestone 4-bellow air suspension (rear axle) Light-colored dashboard Window film, 4-bellow air suspension, 980 mm, LowLiner, 355/50, FDR 2.31, Winter package with heated windscreen, sun visor, LED, retarder, air pressure horn, Technology Package 5 F-MAX F-MAX LL F-MAX L Wheelbase 3600 Saddle height 980 Front overhang 1450 Rear overhang 873 Total length 5907 Total cab length 2350 Overall height 3950 Overall width (without mirrors) 2540 - 2160 78 LITER SCR TANK Diesel tank 372 liters 600 LITER MAIN TANK Ground clearance front 269 Ground clearance rear 243 ConnecTruck Cruise control Lane keeping assistant Emergency brake assistant Axle load indicator Electronic Stability Program (ESP) Traction control (ASR) Eco Roll Differential lock Driver’s seat (high-quality upholstery) Parking heater ConnecTruck MaxCruise (predictive cruise control) Electric cab tilting system LED daytime running lights Maneuvering assistance lighting Fog lights and rear fog lights Automatic lighting Leather-covered steering wheel Steering wheel controls 8" instrument panel Multimedia system with 7.2" touchscreen External sun visor Roof spoiler Side skirts Side fairings Onboard internet Dodpfxsyvm Nwj Aa Ijku

Condition: refurbished (used), Year of construction: 2021, HANDTMANN PVLH-228 2021 year The machine after capital renovation. All bearings and sealings in this machine are new. 3 months warranty for parts. New funnels and brake. Delivery time: 3 weeks. natural or artificial intestine kit to be agreed Dodpfx Aorf S U Dea Ieku

Condition: used, Siemens Connection Box PN Plus 6AV6671-5AE11-0AX0 Connection box for SIMATIC HMI panels with a PROFINET interface. Suitable for industrial operator control and visualization systems in production and automation plants. Manufacturer: Siemens Product designation: Connection Box PN Plus Article number: 6AV6671-5AE11-0AX0 Communication: PROFINET PROFINET ports: 2 Status indicators: Link and Activity for Port 1, Port 2, and the panel Supply voltage: 24 V DC Current consumption: max. 1.0 A Ambient temperature: 0 °C to +50 °C Country of manufacture: Germany Condition: used Dedpfxozdahhe Aa Ijku Location: Kusel 6 units available

Condition: like new (used), functionality: fully functional, Year of construction: 2024, For sale: CNC bending machine CIDAN FS26 PLUS. With an adjustable bending center, the bending beam maintains a constant distance to the radius rail throughout the entire bending process. The result is an ideal radius, without causing material stress, regardless of the thickness, perfect finish, and almost unparalleled accuracy of angles and measurements. Technical specifications: Year of manufacture: 2024 Total weight: 2930 kg Control: CNC with nuLink Mechanical deflection compensation adjustment (Crowning system) Working length: 2600 mm Max. bending thickness: 2.5 mm Bending beam tooling: 7/10 and 25 mm Automatic back gauge – flexible 1550 mm CNC control with nuLink graphical user interface (intuitive, easy programming) High accuracy and repeatability Application: This machine is designed for bending, forming, and profiling sheet metal. It is perfectly suited for the production of ventilation systems, facades, sheet metal structures, metal doors, chimneys, and roofing systems. The robust frame and precise CNC control enable extremely high production accuracy. Dkodpfx Aajzc Hpie Isu If you have any further questions, we will be happy to answer them.

Year of construction: 2015, operating hours: 2,677 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, number of axes: 3, This 3-axis punch press for profiles PARS HMP SIRIUS PLUS -3000/3-L1 was manufactured in 2015. It features a maximum section dimension of 110 x 110 mm and can handle wall thicknesses up to 8 mm. The machine offers a punching speed of 1 hole/s and is capable of punching 2 sections simultaneously with its 2-row design. If you are looking to get high-quality punching capabilities, consider the PARS HMP SIRIUS PLUS -3000/3-L1 punch press for profiles we have for sale. Contact us for further details. • Punching speed: 1 hole/s (including shift to next position) • Max. section dimensions: 110 x 110 mm • Wall thickness: up to 8 mm Dsdpfxozhv Tto Aa Ijku • Shear cylinder force: 17 t / 30 t • Section length: 3 m • Number of punching axes: 1–6 (holes in X–Y–Z system) • Number of punching rows: 1–2 (2-row machine punches 2 sections simultaneously) • Main axis drive: linear motor or rotary servo motor • Expanding adapter for internal section support (deformation-free punching) • Automatic mechanical centering of the section at the shear point • Micro-lubrication only at the shear point

Condition: used, mileage: 299,806 km, power: 103 kW (140.04 HP), first registration: 02/2018, fuel type: diesel, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro6, number of seats: 5, Year of construction: 2017, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, VW Crafter 2.0 TDI, medium wheelbase, with 5 seats, featuring: air conditioning, navigation, auxiliary heater with remote control, electric windows, tilting window in the second row of seats. - Special features: Dkodszgz Efjpfx Aa Ieu Second battery with battery monitoring; driver and passenger airbags; passenger airbag can be deactivated; Discover Media audio navigation system (touchscreen color display); electrically adjustable and heated exterior mirrors; driver assistance systems: front and rear parking sensors; chassis: reinforced suspension and shocks; sliding windows in cargo/passenger compartment: front left and right; vehicle without cargo partition; Climatic air conditioning (driver’s cab) with second evaporator; side marker lights; smoker's package; spare wheel in matching tire configuration including on-board tools and jack; rear door hinges with increased opening angle; comfort seats for driver and front passenger; auxiliary heater with remote control; 4 x 12V power sockets in the cab; rear entry step integrated in bumper; half-height plastic cladding in the cargo/passenger compartment. Additional equipment: Convex exterior mirrors left and right; LED indicators integrated into exterior mirrors; rubber floor covering in cab; aerodynamic underbody paneling; dual headlights; twin-tone horn; grab handle on rear left and right roof pillars; hill start assist; brake assist system (HBA); crosswind assist; front electric window lifters; laminated safety glass windscreen; grab handles on A-pillars; rear wing doors without windows; LED interior lights in cab and cargo/passenger compartment; body type: standard panel van; roof type: standard roof; 75-litre fuel tank; front radiator grille with upper chrome trim; steering column (steering wheel) adjustable; headlight beam adjustment; N1 homologation (commercial vehicle registration); engine: 2.0 L - 103 kW TDI; rear fog light; wheelbase: 3640 mm; tire repair kit; low-emission as per Euro 6 emissions standard; right-side sliding door in cargo/passenger compartment; SCR system (AdBlue technology); electro-mechanical power steering; seat upholstery: fabric; 6.5x16 steel wheels; start/stop system; front bumper in grey with colour-coded trim; lashing points in cargo area; driver's seatbelt warning system; heat-insulating glazing; central locking with remote and interior actuation; permissible gross vehicle weight: 3.5 t. - Financing available via our partner banks. We are happy to assist you. Please note: subject to prior sale as this item is also offered on other platforms. Accessory specifications provided without guarantee. Changes, prior sale, or errors excepted. We offer and strongly recommend a viewing and inspection to ensure buyers have an accurate understanding of condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged.

Condition: good (used), Year of construction: 2005, Console table with vacuum suction plate New control system installed in 2022 (price: €9,000) Dkedpfozhgz Iex Aa Ieu Control program: Xilog Plus X-axis between stops: 2500 mm Y-axis with milling: 1240 mm Y-axis with drilling: 1080 mm Z-axis: 200 mm (max. workpiece height: 100 mm) Main spindle HSK 63 with 6.5 kW, up to 24,000 rpm 4 tool changers at the front 4 tool changers at the rear Drilling unit External dimensions: 5.8 x 2.8 m

Condition: like new (used), Year of construction: 2023, operating hours: 506 h, functionality: fully functional, machine/vehicle number: G3790-0043, turning length: 705 mm, turning diameter over cross slide: 290 mm, turning diameter: 230 mm, spindle motor power: 20,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, travel distance X-axis: 195 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 8 m/min, rapid traverse Z-axis: 40 m/min, rotational speed (max.): 5,000 rpm, feed length Z-axis: 700 mm, bar passage: 51 mm, Equipment: rotational speed infinitely variable, 1. CNC turning machine with a 12-position tool turret, capable of simultaneously controlling up to 8 spindles for 2 systems. 2. Enables single-setup machining. 3. Powerful, integrated spindle motor. 4. Robust BMT turret. 5. Multitasking capabilities can be achieved by adding a Y-axis to the upper turret (TTSY specifications). 6. Integrated machining through synchronized control of the main and counter-spindle. 7. Construction with hybrid guides: a combination of box guides (XY-axis) and linear guides (Z-axis). Dksdpfx Aaozd D Nuo Isu

Condition: excellent (used), functionality: fully functional, REFRIGERATION UNIT: CARRIER Unit with Wilo circulation pumps + external condenser. Dismantled by a professional refrigeration company. The unit does not contain glycol. The transport costs depend on the weight, volume and above all the distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require a telephone contact, so please ask about transport costs and other delivery methods to contact us by phone. Our contact details can be found in the seller's legal information. Payment in cash on delivery on site. We sell and export worldwide, thanks to our very large warehouse capacity we can also flexibly and quickly deliver larger quantities. Please contact us before purchasing. We issue intra-Community invoices - without VAT. Dksdpoz Aa Rxofx Aa Ieu opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 60 t, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Dodpfx Aaoz Aafpo Ieku Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: used, CNC cycle-controlled turning machine HARRISON, Type Alpha 400 Plus Machine No. P30180/150 Year of manufacture 1998 Center distance 1250 mm Turning diameter over bed 400 mm Center height 200 mm Turning diameter over cross slide 245 mm Diameter in the crotch 585 mm Bed width 313 mm Cross travel (X-axis) 250 mm Tailstock quill diameter 73 mm Tailstock quill stroke 140 mm Tailstock quill taper MK 5 Spindle bore 54 mm Spindle head size Camlock D1 Size 6 Spindle speed 20-2500 rpm Spindle speed range (Stage 1) 15-275 rpm Spindle speed range (Stage 2) 35-795 rpm Spindle speed range (Stage 3) 110-2500 rpm Feed rate X and Z 0.03 - 0.6 mm/rev Rapid traverse rate X-axis max. 2000 mm/min Rapid traverse rate Z-axis max. 4000 mm/min Threading function Metric / Inch / Diametral / Module Spindle drive power 7.5 KW Power connection 400 Volt, 50 Hz, 23.5 kVA - Cycle control Harrison Alpha / GE FANUC - Language in French (France) Dksdpfsh Hvk Ajx Aa Iju - Automatic gear range selection in 3 stages (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with different gear ratios (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm Type CSN, 1 set of soft jaws - Quick-change tool holder MULTIFIX Size B with 2 inserts - 1 live center - 1 quick-change drill chuck RÖHM, 3-16 mm - Folding chuck guard - Folding work area safety doors - Chip tray with coolant system under the machine bed - Control cabinet fixed to the machine - RS 232 interface Space requirement L x W x H 2600 x 1450 x 1550 mm Weight 1950 kg Good condition

Condition: new, functionality: fully functional, empty load weight: 683 kg, maximum load weight: 2,017 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,535 mm, loading space width: 2,150 mm, tire size: 195 / 50 R 13C, trailer brake: trailer braked, Year of construction: 2026, MARTZ GT Unideck Plus 450/2 S 2.7T NEW VEHICLE Internal dimensions: 453cm x 215cm Total weight: 2700kg Payload: 2017kg Braked 2-axle trailer Overrun brake and parking brake from KNOTT or AL-KO 2x 1350kg axles and brake with automatic reverse function Suitable for transporting longer vehicles Low chassis Bolted, hot-dip galvanized steel frame Steel ramps in the rail channel Numerous tie-down points along the entire length Reinforced 13" C tires with steel valve M+S tires 13-pole plug Side marker lights Rear lights with reversing light and triangular reflectors Winch with brake and bracket 2x wheel chocks OPTIONAL ACCESSORIES WITH PERMANENT PRICE REDUCTION FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with bracket -Complete LED lighting Dkodpfx Aajzvb N Nj Iju -Anti-theft device -Replacement of steel rail with aluminum rail -Wheel stops -Folding crank-operated rear supports -Anti-sway coupling Further accessories available upon request! Plus shipping to Gera and vehicle registration document €250 net Images are examples and may show accessories that are subject to an additional charge. Have you not yet found the right trailer? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repair, including for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. We also offer a wide selection of rental trailers. Visit us online or come by directly!

Condition: used, Year of construction: 2014, power: 5 kW (6.80 HP), We are selling a container press! 1. Manufacturer – Ludden und Mennekes Dodpfx Ajz Hbzqsa Isku Type – LM20L Year of manufacture – 2014 Capacity – 20 m³ Motor power – 5.5 kW 2. PRESKONTAINER LM20L, 2011, 5.5 kW Price on request!

Condition: repair required (used), Year of construction: 2008, operating hours: 25,000 h, functionality: not functional, machine/vehicle number: 191-65, workpiece length (max.): 400 mm, workpiece width (max.): 400 mm, workpiece height (max.): 400 mm, workpiece diameter (max.): 350 mm, overall weight: 8,700 kg, spindle speed (max.): 20,000 rpm, number of spindles: 1, Equipment: chip conveyor, documentation/manual, 2008 CHIRON FZ 15KS High Speed Plus 5-axis vertical machining center with Heidenhain CNC control. Machine weight approximately 8,700 kg. Chip conveyor included. The spindle is defective and has been removed. The spindle and available related components are stored in wooden crate and are included in sale. The spindle requires repair,rebuilding. The machine is sold as-is and where-is. Inspection is available in Ankara,TURKEY. Asking price: EUR 30.500, negotiable. EXW Ankara. Dsdpfx Aaoz Hmb Ae Ieku

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 6939.26 € 133.93 € 20 mm MK 2 260 mm 30 - 3000 U/min 1,5 kW M12 430 mm 715 mm 1800 mm 290 kg 100 mm 110 mm 230 - 850 mm 420 x 340 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 20/23 (in E335/ST60) Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Djdpoy Hf N Rjfx Aa Ieku Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation Art. - No. 223.020 R1 (20-2,000 1/min) Art. - No. 223.025 R2 (30-3,000 1/min) OPTIONS (PRICES ON REQUEST): Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Deutschland 7519.51 € 145.13 € 23 mm MK 3 260 mm 20 - 2000 U/min 1,5 kW M16x1 430 mm 715 mm 1800 mm 290 kg 115 mm 110 mm 230 - 850 mm 420 x 340 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling Performance 23/25 (in E335/ST60) Main switch Thread cutting device Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Djdpfx Ajy Hf Ruea Isku Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug 3 years warranty for single shift operation OPTIONS (PRICES ON REQUEST): Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: new, Year of construction: 2025, neu 2025 030161 prompt, Zwischenverkauf v Dksdpfjxcg Ecsx Aa Isu Deutschland 7350.17 € 141.86 € 1 23 mm MK 2 260 mm 20 - 2000 U/min 1.5 kW M16x1 430 mm 715 mm 1800 mm 290 kg manuell mm/U 110 mm 230 - 850 mm 420 x 340 mm 100 mm PLUS - CONTROL PANEL WITH FOLLOWING FUNCTIONS: - Display - Operation via function keys and rotary/push button - Drilling mode / Tapping mode - Zero point setting - Drilling depth adjustment - Infinitely variable speed adjustment - Piece counter - Spindle stop function (spindle stops automatically after drilling) Drilling capacity / normal drilling capacity 23/25 (in E335/ST60) Manual feed Main switch Tapping attachement Control panel with OLED display Robust, high quality drill head hood with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drill depth stop Stepless speed control via central rotary knob EMERGENCY STOP pushbutton Thermal overload protection Spindle stop Drill protection with electr. Fuse Connection cable with CEE plug OPTIONS: Drill package 3 (vice & keyless chuck) Coolant device LED lighting with pivot arm

Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of feed rollers: 5 Number of machining units: 4 Lower milling spindle Spindle diameter: 40 mm Dodpfx Asz Ekkxoa Ioku Spindle length: 240 mm Motor power: 4 kW Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT CE-compliant safety design The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Condition: used, SPECIFICATIONS: Total Heading Load (kN) 700 Maximum Heading Load per Station (kN) 450 Strokes per Minute - Variable Speed 1/min 100/300 Cutoff Diameter at 600 N/mm2 12mm (600 N/mm2) Maximum Transfer Diameter 14mm Dkedpfx Aez Irinea Isu Cutoff Length (min/max) 3mm- 50mm Kickout Stroke - Die (Min/Max) 3mm - 50mm Kickout Stroke - Punch (Min/Max) 12/32mm Maximum Die Diameter 60mm Punch Diameter 50mm