Used Cormak High-Vacuum Centrifugal Fan for sale (27,018)

Condition: new, functionality: fully functional, Year of construction: 2026, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). Lodpfxjx Agpzs Abysru The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK!

Condition: new, Year of construction: 2026, functionality: fully functional, The FM 230N transport fan is a professional solution for the local extraction of sawdust, wood chips, and dust generated during wood processing. Its compact design, durable motor, and high efficiency make this sawdust blower an ideal component of dust extraction systems in carpentry shops, workshops, and for single- or multi-spindle machines. Ljdsvu Ad Aspfx Abyeru Key Advantages Effective sawdust extraction – capacity of 1000 m³/h enables efficient removal of contaminants directly from the workplace 0.75 kW motor – provides adequate torque with low energy consumption High impeller speed – 2950 rpm ensures intensive airflow 100 mm inlet diameter – allows easy connection to commonly used machines and systems Low weight (15 kg) – facilitates easy transport and installation at various workstations Design and Technology The FM 230N fan features a closed, welded steel construction with the impeller mounted directly on the motor shaft. This design eliminates power losses associated with belt drives and minimizes vibration. The housing has been optimized for airflow, ensuring stable operation even during continuous use. The electric motor is powered by 230V at a standard frequency of 50 Hz, allowing universal application in most workshops without the need for three-phase power installation. Precision and Performance The FM 230N is designed for highly efficient transport of air containing lightweight wood particles. Thanks to its optimized impeller and airflow channel, the unit minimizes air resistance, enabling uninterrupted operation even with large volumes of chips and sawdust. It performs equally well as a transport fan for sawdust or as a local blower supporting woodworking machines. Applications The FM 230N is suitable for carpentry workshops, furniture manufacturing plants, and production facilities using machines that generate dust. It can operate independently or as part of a larger dust extraction system. Particularly recommended for use with: planers and jointers thickness planers spindle moulders edge banders circular saws Standard Equipment powder-coated steel housing 100 mm inlet port stable mounting base single-phase 230V motor Optional Equipment 100 mm flexible hoses dust collection bags Technical Specifications Parameter Value Motor power 0.75 kW Speed 2950 rpm Extraction capacity 1000 m³/h Inlet diameter 100 mm Outlet diameter 110 mm Voltage / Frequency 230 V / 50 Hz Dimensions (L × W × H) 430 × 400 × 340 mm Weight 15 kg

Condition: new, Year of construction: 2026, Cormak press brakes are advanced devices that enable precise bending of sheet metal thanks to appropriately selected punches and dies. Our offer includes models equipped with DELEM DA-53TX controllers as standard and optionally DELEM DA53T, DA-58T, DA-66T, DA69T and CYBELEC 12 controllers, which provide a wide range of functions that allow for the implementation of the most demanding bending tasks. Main Features: Front supports: 2 pieces, ensuring stability during bending operations X-axis AUTOMATIC SERVO Axes Y1, Y2, – AUTOMATIC (optional SERVO motor) R-axis – Automatic SERVO Automatic adjustment / compensation of the deflection arrow Front support on linear guides As standard, the machine is equipped with hardened, divided punches and 4V (42CrMo) dies Machine Description Ultimate press brakes are an advanced tool used in the industry for edge processing and bending materials. It is a versatile device that allows precise and effective finishing of edges of various types of materials, such as steel, aluminum and plastics. Ultimate press brakes have been designed with efficiency and reliability in mind. It is equipped with a solid structure that ensures stability during operation. The machines also have advanced control systems that allow programming of various operating parameters, such as edge speed, bending angle and pressure force. One of the main advantages of the Ultimate press brakes is their ease of use. The intuitive user interface allows the operator to easily program and control the machining process. Additionally, the presses are equipped with advanced safety systems that ensure safe use. Thanks to their high performance, the EASY press brakes are the ideal solution for manufacturers who require fast and precise edge processing. It can be used in various industries, such as the metal industry, carpentry, furniture production and the plastics industry. Technical parameters Max. thickness of bent sheet metal (S235) up to 6.0 mm Nominal pressure 1300 kN Maximum length of bent sheet metal 3200 mm Depth of cut in beams (throat) 550 mm (option 620mm) Lrjdpfxouwqbxo Abyeu Maximum stroke of moving beam 200 mm (option 300mm or 400mm) Maximum opening height 390 mm Distance between beams 2700 mm Rear bumper departure 650 mm (option 1000mm) SERVO motor power 7.5 kW Length 3870 mm Width 1600 mm Height 2600 mm Weight 7500 kg *An offline workstation license (for creating bending sequences on a PC) is available as optional equipment! The price includes: Electric deflection arrow – €2,380 Supports on linear guides – €480 Hydraulic oil – €440

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM500 sawdust extraction system with dust filters is a high-performance unit designed for the effective removal of chips, sawdust and fine dust generated during woodworking operations. Thanks to the use of a third filtration stage – dust filters with an efficiency of up to 2 microns – the unit significantly improves air cleanliness in the workplace. This model meets the highest requirements of professional users while offering high suction power, structural stability and reliable performance during continuous operation. Main Advantages Very high extraction capacity – 5,000 m³/h, ideal for connecting multiple machines simultaneously Advanced dust filtration system (third stage) – captures particles as small as 2 microns Balanced metal impeller – quiet, vibration-free operation 2.8 kW three-phase motor – ensures consistent negative pressure and extraction performance Ability to connect up to 4 machines simultaneously – optimizes production processes Air suction speed of up to 31 m/s – effective dust removal without allowing dust to settle around the workstation Large waste bag capacity – 480 l – longer operating cycles without the need for emptying Mobile steel base – easy movement of the extraction unit around the production hall Construction and Technology The CORMAK FM500 has been designed for demanding industrial conditions. The extraction system is equipped with a metal impeller operating at 2,950 rpm, ensuring high negative pressure and consistent suction power. The unit is built on a robust steel frame with supports for the waste bags, providing stability and resistance to deformation. Thanks to four extraction outlets (1 × 200 mm / 4 × 100 mm), the unit can operate with multiple woodworking machines simultaneously. Precision and Operating Efficiency The FM500 woodworking extraction system stands out with its high suction power and advanced dust filtration system. As a result, it minimizes dust levels in the production hall, extends machine service life and improves air quality. The high extraction capacity of 5,000 m³/h and negative pressure of up to 2,500 Pa ensure effective performance even during prolonged operation with three or four machines. Applications The FM500 is an ideal solution for: woodworking and furniture manufacturing facilities, workshops equipped with planers, saws, sanders, milling machines and thickness planers, production lines requiring simultaneous dust extraction from multiple workstations, environments where limiting the spread of dust and fine airborne particles is critical. Standard Equipment mobile wheeled base, dust filters – third filtration stage (down to 2 microns), 480-litre waste bags, 4-outlet extraction manifold (1 × 200 mm, 4 × 100 mm). Optional Equipment 100 mm extraction hoses, galvanized hose clamps, Technical Data Motor power 2.8 kW Power supply 400 V / 50 Hz Motor speed 2,950 rpm Lrsdpfsz A Tl Tex Abyou Extraction capacity 5,000 m³/h Negative pressure up to 2,500 Pa Air suction speed up to 31 m/s Waste bag capacity 480 l Outlet diameter 200 mm / 4 × 100 mm Dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM350 sawdust extractor with dust filters is a machine designed for intensive use in woodworking facilities. It combines a compact design, high performance, and an advanced filtration system that effectively removes chips, sawdust, and fine dust from workstations. Thanks to the use of third-stage dust filters, the extractor minimizes airborne dust, directly improving operator safety and working comfort. Main Advantages of the Machine Extraction capacity of 4560 m³/h – fast and effective removal of sawdust and chips from up to four machines simultaneously Dust filters – highly effective at trapping fine particles and reducing airborne dust in the work area Steel impeller – a balanced component ensuring vibration-free and quiet operation 3.8 kW three-phase motor – provides high power and stable suction pressure 6 bags with a total capacity of 600 l – extended operating time without the need for frequent emptying Connection to up to 4 workstations – maximum functionality for multi-stage operations Adjustable feet and a stable frame – precise leveling and safe operation on uneven surfaces Construction and Technology The CORMAK FM350 woodworking dust extractor is built on a reinforced, powder-coated steel frame. The filtration system consists of 3 dust filters and 3 waste bags, each with a capacity of 200 liters. The bags are secured using robust steel clamps, ensuring quick replacement and easy maintenance. The 300 mm diameter steel impeller provides smooth operation and ensures the durability of the machine, even under intensive working conditions. Precision and Performance The FM350 operates with an extraction capacity of 4560 m³/h, maintaining stable suction performance thanks to an impeller speed of 2950 rpm. Four suction connections (1 x 180 mm + 4 x 100 mm) allow several woodworking machines to be connected simultaneously, making the unit an ideal solution for serial production and service workshops. The dust filters effectively remove fine dust particles that are often not captured by conventional filter bags. This significantly improves air quality and reduces the risk of dust accumulation and clogging in machines. Applications The CORMAK FM350 chip extractor is recommended for use with: milling machines, planers and thickness planers, band saws and panel saws, wide-belt and drum sanders. It is suitable for both production facilities and medium-sized woodworking workshops where effective dust extraction and occupational health and safety are priorities. Standard Equipment 3 dust filters 3 waste bags with a capacity of 200 l each Connection manifold: 1 x 180 mm / 4 x 100 mm Adjustable feet Optional Equipment Ø100 mm extraction hose Galvanized clamps Technical Specifications Parameter Specification Extraction capacity [m³/h] 4560 Bag volume [l] 3 x 200 Number of bags 6 (3 filter bags + 3 waste bags) Lredpfx Aoz A Tv Ejbysu Suction connection diameters [mm] 1 x 180, 4 x 100 Dimensions (L x W x H) [mm] 2355 x 590 x 2150 Weight [kg] 125 Motor power [kW] 3.8 Power supply 3-phase, 400 V Manual (DTR) yes CE Declaration Yes

Condition: excellent (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: F210198, compressed air connection: 6 bar, warranty duration: 12 months, year of last overhaul: 2026, Equipment: documentation/manual, F2000 HS - HIGH SPEED AUTOMATIC CARTON ERECTOR CARTON DIMENSIONS: - Length: min. 220 mm - max. 600 mm - Width: min. 100 mm - max. 500 mm - Height: min. 100 mm - max. 500 mm TECHNICAL DATA: - Siemens S71200 PLC control - Performance: 1200 cartons/min (depending on length and quality of the cartons) - Motorized carton magazine: 120 cartons - Control panel: HMI digital, Kite model 7'' - Automatic start/stop via photoelectric sensor - Venturi vacuum system: 25 m3/h, 700 mm HG Lrsdpfjz Dwz Iox Abysu - Mains voltage 400V, 3-phase, N, PE - 50/60 Hertz - Protection class IP 54 - Compressed air 6 bar - Air consumption 22 nl - Operating environment +5° C - max. +35° C - Working height 650 mm, adjustable +30 mm - Weight 1,160 kg - Dimensions of the erector incl. sealer in mm (l x w x h): 3,200 x 2,580 x 1,990 - CE safety protection The system includes a GEM B52HS carton sealer. GEM B52HS CARTON SEALER WITH SIDE DRIVE BELTS FOR CONSISTENT CARTON FORMAT CARTON DIMENSIONS: - Length: min. 150 mm - max. ∞ mm - Width: min. 150 mm - max. 670 mm - Height: min. 100 mm - max. 670 mm TECHNICAL DATA: - Drive and guide belts, vertical - Carton format adjustment, manual - Sealing unit, bottom - Standard version T22 / T23 - Adhesive tape width: 38 to 50 mm, depending on the unit - Tension adjustable - Max. adhesive roll diameter: 360 mm - Adhesive tape roll core: 76 mm - Mains voltage 400V, 3-phase, N, PE - 50/60 Hertz - Consumption 0.25 kW - Protection class IP 54 - Operating environment +5° C - max. +35° C - Transport speed 22 m/min - Average production 1000 cartons/hour - Working height 650 mm - Weight 120 kg - Dimensions of the erector incl. sealer in mm (l x w x h): 3,200 x 2,580 x 1,990 - CE safety protection: side sheet metal covers with access door, upper and lower covers (mandatory when combined with F1000/F2000/F2008) The image may contain optional features that incur an additional cost.

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM300SA sawdust extractor with dust filters is a highly efficient and robust dust extraction system designed for woodworking and carpentry facilities. Thanks to its increased filtration area and four fabric bags, this model effectively removes both wood chips and fine dust generated during intensive machine operation. The FM300SA woodworking dust extractor is an ideal solution for many hours of continuous operation in an industrial environment. Main Advantages of the Machine Extraction capacity of 3900 m³/h – effective removal of sawdust and dust even when working with several machines simultaneously 4 fabric bags – increased capacity and longer intervals between emptying High-efficiency dust filter – separates particles as small as 2 microns Lsdez A Txyspfx Abysru Metal, dynamically balanced impeller – vibration-free and quiet operation of the system 2.2 kW three-phase motor – ensures reliable and continuous operation in industrial conditions Stable steel construction – resistant to deformation and demanding operating conditions Mobility – four-wheel mobile base with a maneuvering handle Construction and Technology The FM300SA is equipped with a multi-stage filtration system based on filter bags and dust filters, ensuring a high level of air purification. The metal WhirlWind series impeller and efficient suction duct system guarantee stable airflow without pressure drops. The Y-shaped connection manifold (1 x 150 mm / 3 x 100 mm) allows several processing machines to be connected simultaneously. Precision and Performance Thanks to optimized duct aerodynamics and a large filtration surface, the CORMAK FM300SA sawdust extractor provides effective dust removal even during continuous operation. High-quality filtration reduces the amount of contaminants in the working environment, directly contributing to operator health and improving the precision of machine operation. Applications The FM300SA is designed for professional users who work with large quantities of sawdust and wood chips. It is ideally suited for: carpentry workshops and furniture manufacturing facilities, production lines equipped with multiple machines, dust extraction from sanders, planers, saws, milling machines, and thickness planers, areas requiring fine dust filtration (dust filters included). Standard Equipment metal mobile base with 4 wheels, 4 fabric bags (filtering and waste bags), 2 high-efficiency dust filters, extraction connection manifold (1 x 150 mm, 3 x 100 mm). Optional Equipment 100 mm extraction hose, galvanized clamp. Technical Specifications Parameter Specification Extraction capacity [m³/h] 3900 Negative pressure 1750 Pa Noise level 75 dB Bag volume [l] 220 Number of bags 4 Suction connection diameters [mm] 1 x 150, 3 x 100 Dimensions (L x W x H) [mm] 1400 x 570 x 2250 Weight [kg] 64 Motor power [kW] 2.2 Power supply 400 V / 3-phase Manual (DTR) Yes CE Declaration Yes

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Lrjdpfx Asym U Insbyeu Type: CD 120-PR Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK 2000-Litre Pressure Tank – English Translation The CORMAK pressure tank with a capacity of 2,000 litres and a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing the compressor's operating parameters. Key Advantages of the 2,000 L Pressure Tank Professional pressure-vessel construction – made of high-grade 5 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 2,000 litres – provides a stable supply of compressed air and reduces the frequency of compressor start-up cycles. Multi-connection system – equipped with 5 connections in 2" and 1/2" sizes, allowing flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – the vertical construction helps save valuable space in industrial facilities. Ljdpfjzznuvox Abyeru Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 5 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE marking and the identification number of the UDT notified body, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure-vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 2,000-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of compressed-air-powered equipment and significantly extends the compressor's service life by reducing the number of start-up and shutdown cycles. The vertical design allows for compact installation, which is particularly important in facilities where space is limited. Standard Equipment Connection ports: 5 pcs. – sizes 2" and 1/2" Nameplate with CE marking UDT notified body identification number Complete technical documentation and pressure-vessel passport External anti-corrosion coating Technical Specifications Parameter Specification Weight (kg) 360 Number of connections 5 Connection size 2", 1/2" Dimensions 289 × 101 cm Tank capacity (L) 2,000 Working pressure (bar) 11 Wall thickness (mm) 5 Diameter (mm) Ø 1,010 Height (mm) 2,890

Condition: used, Radial fan, low pressure fan, dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower Lrsdeuqf Ilspfx Abyou -Manufacturer: Elektror, radial fan low pressure fan type D-06/S 484 -Volume output: 10 m³/min -Fan wheel: Ø 170 x 90 mm -Speed: 2800 rpm -Inlet: Ø 105 mm -Air duct connection: 110 x 110 mm -Dimensions: 410/280/H365mm -Weight: 12.3 kg

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM300S Dust Extractor with Dust Filters Lrsdpfx Absz A T Hqsyju The CORMAK FM300S dust extractor with dust filters is a professional machine designed for the efficient removal of chips, sawdust, and fine dust generated during wood processing. Thanks to its dual filtration system, powerful three-phase motor, and well-designed construction, the FM300S woodworking dust extractor is an ideal solution for both medium-sized and larger production workshops. Main Advantages of the Machine High extraction capacity – 3,900 m³/h – effective operation even with large amounts of contaminants Dust filters included – ensure efficient particle separation and cleaner air 2.2 kW three-phase motor – guarantees continuous and reliable operation Balanced metal impeller – reduces vibration and noise Mobile construction with 4 castor wheels – easy to move even in confined spaces Quick bag fastening system – convenient and fast maintenance 1 x 150 / 3 x 100 mm extraction outlets – enables simultaneous operation with several machines Construction and Technology The FM300S dust extractor is built on a stable steel frame, powder-coated for improved resistance to industrial conditions. The machine is equipped with a WhirlWind series metal impeller, which provides efficient suction while maintaining a low noise level. The large extraction outlet allows the machine to operate with up to three processing stations simultaneously, significantly increasing the productivity of the workshop. Precision and Operating Efficiency The advanced extraction system combines high negative pressure with efficient filtration of fine particles through integrated dust filters. As a result, the CORMAK FM300S sawdust extractor not only helps keep the work area clean but also contributes to operator health and the reliable operation of woodworking machinery. Applications The FM300S is designed for professional users who require continuous operation with saws, milling machines, planers, and other equipment generating significant amounts of sawdust and wood chips. The dust extractor is ideally suited for: woodworking workshops, furniture manufacturing plants, craft workshops, local dust extraction systems in production lines. Standard Equipment mobile metal base with castor wheels, 2 fabric waste collection bags, 2 dust filters (main filters), Y-shaped extraction connector. Optional Equipment 100 mm extraction hose, galvanized clamps, filter cartridges with filtration efficiency down to 2 microns. Technical Specifications Specification Value Extraction capacity [m³/h] 3,900 Negative pressure 1,750 Pa Noise level 75 dB Bag capacity [l] 150 Number of bags 2 (waste collection) Diameter of extraction outlets [mm] 1 x 150, 3 x 100 Dimensions (L x W x H) [mm] 1,400 x 570 x 1,960 Weight [kg] 64 Motor power [kW] 2.2 Power supply 400 V / 3-phase User and Maintenance Manual (DTR) YES CE Declaration of Conformity YES

Condition: new, Year of construction: 2026, CORMAK 660 × 2000 Universal Lathe The CORMAK 660 × 2000 Universal Lathe is a heavy-duty industrial conventional lathe designed for precision metalworking in manufacturing environments. Its robust construction, featuring a massive hardened bed and a powerful 7.5 kW spindle drive, ensures excellent machining stability, dimensional accuracy, and long service life, even under intensive production conditions. Key Features of the CORMAK 660 × 2000 Universal Lathe Electromagnetic foot brake ensures maximum operator safety while significantly reducing downtime by allowing fast and reliable machine stopping. Rapid longitudinal and cross feeds considerably reduce tool travel time, increasing machining efficiency and operator productivity. Versatile machining capabilities including external and internal turning, taper turning, thread cutting (metric, imperial, module, and DP), drilling, broaching, and polishing. Hardened and precision-ground 350 mm cast iron bed provides outstanding vibration damping and high machining accuracy. Large Ø105 mm spindle bore with D1-8 spindle nose allows machining of large-diameter shafts and workpieces. High-performance spindle drive with 7.5/9 kW motor delivers reliable power for demanding cutting operations. Wide thread-cutting range without changing change gears, saving setup time and improving production flexibility. 3-axis Digital Readout (DRO) enhances positioning accuracy and provides better control over the machining process. The machine body is manufactured from high-quality cast iron, providing a substantial machine weight of approximately 3,190 kg, ensuring excellent vibration absorption. The headstock is equipped with a reinforced bearing system for smooth and stable operation throughout the spindle speed range of 25–1500 rpm. A centralized feed gearbox, leadscrew, and feed rod enable precise thread cutting as well as automatic longitudinal and cross feeds. Standard Equipment 3-axis Digital Readout (DRO) 315 mm 3-jaw chuck 400 mm 4-jaw chuck 400 mm faceplate Fixed steady rest Follow rest Coolant system Machine work light Operating manual (Polish/English) CE Declaration of Conformity Technical Specifications Parameter Value Swing over bed Ø660 mm Swing over cross slide Ø455 mm Swing in gap (diameter × width) 885 × 170 mm Centre height 330 mm Distance between centres 2000 mm Bed width 350 mm Maximum tool shank size 25 × 25 mm Cross slide travel 355 mm Compound slide travel 130 mm Spindle bore Ø105 mm Spindle nose D1-8 Spindle taper Ø113 mm (1:20) Number of spindle speeds 12 Spindle speed range 25–1500 rpm Leadscrew diameter × pitch Ø40 × 6 mm Imperial thread range 2–112 TPI (60 selections) Metric thread range 0.2–14 mm (47 selections) Diametral Pitch (DP) threads 4–112 DP (50 selections) Module threads 0.1–7 Module (39 selections) Longitudinal feed range 0.059–1.646 mm/rev (35 selections) Cross feed range 0.020–0.573 mm/rev (35 selections) Tailstock quill travel 180 mm Tailstock quill diameter Ø75 mm Tailstock taper Morse Taper No. 5 (MT5) Main spindle motor 7.5 kW (10 HP), 3-phase Lrjdpfxoyk Dabs Abysu Coolant pump motor 0.1 kW (1/8 HP) Installation dimensions (L × W × H) 334 × 115 × 151 cm Packing dimensions (L × W × H) 340 × 115 × 182 cm Machine weight 3200 kg

Condition: new, Year of construction: 2026, The CORMAK TYTAN 210x520 conventional universal lathe + cutting tools is a professional metalworking lathe designed for precision machining of steel, aluminium and other engineering materials. Its compact design, solid machine bed and 6-speed gearbox ensure stable operation, high accuracy and a wide range of applications in workshops, toolrooms and small manufacturing facilities. CORMAK TYTAN 521 Universal Lathe – Precision Conventional Lathe for Professional Metalworking The CORMAK TYTAN 210x520 universal lathe has been designed for users who require a reliable machine for a wide range of turning operations. The machine's design allows both simple workshop operations and more demanding tasks related to one-off and small-batch production. The 6-speed gearbox allows the operator to easily adjust the spindle speed to the type of material being machined and the operation being performed. Mechanical gear shifting ensures stable operation, high durability and efficient use of the motor's power during turning. Main Advantages of the Machine 6-speed spindle gearbox allowing the appropriate operating parameters to be selected. 750 W / 230 V motor providing stable drive during machining. Compact and rigid construction reducing vibration during turning. Precision bed guides ensuring dimensional accuracy of machined components. Ability to cut both metric and imperial threads. Spindle with an MT3 taper and 21 mm spindle bore. 4-way tool post enabling quick tool changes. Right-hand and left-hand rotation. Spindle guard and chip tray improving safety and working comfort. Standard Equipment Lrsdsz A A Idopfx Abysu steady rest and follow rest, Set of 5 turning tools 125 mm 3-jaw chuck, right- and left-hand jaws, gears for thread cutting, MT2 dead centre, grease gun, chip tray, chuck and tool post keys, open-ended and Allen keys, operating manual in Polish, CE Declaration of Conformity. Optional Equipment lathe stand, 4-jaw chuck, tool holders, live centres, turning tools, drill chucks for the tailstock. TECHNICAL SPECIFICATIONS Specification Value Swing over bed 210 mm Swing over cross slide 115 mm Distance between centres 520 mm Bed width 125 mm Headstock Spindle bore 21 mm Spindle nose taper MT3 Number of spindle speeds 6 Spindle speed range 140–1710 rpm Feed and Thread Cutting Number of metric threads 11 Metric thread range 0.4–3 mm Number of imperial threads 11 Imperial thread range 8–28 TPI Longitudinal feed range 0.05–0.2 mm/rev Cross Slide and Longitudinal Slide Tool post type 4-way Maximum tool post slide travel 70 mm Maximum cross slide travel 115 mm Maximum longitudinal slide travel 460 mm Tailstock Tailstock quill travel 45 mm Tailstock spindle taper MT2 Main Motor S1/S6 750 W / 1000 W / 230 V / 1 Ph / 50 Hz Dimensions Length 1150 mm Width 580 mm Height 550 mm Weight 120 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK 500-litre pressure vessel with a working pressure of 16 bar is a reliable solution designed for storing compressed air in industrial facilities, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, it can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Features of the 500 L Pressure Vessel Professional pressure-rated construction – made of high-quality 5 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 16 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High 500-litre capacity – provides stable compressed air supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – 6 connection ports with diameters of 1 1/4", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating provides long-lasting protection. Space-saving vertical design – allows efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 5 mm wall thickness, ensuring resistance to pressures of up to 16 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. Lrjdpfxezwmlfe Abysu Standard Equipment Connection ports: 6 pcs. G1/2" – 2 pcs. G2" – 2 pcs. G1 1/4" – 2 pcs. Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Technical Specifications Tank capacity 500 L Maximum allowable pressure PS 16 bar Test pressure PT 22.88 bar Maximum allowable temperature TSmax 50°C Minimum allowable temperature TSmin -20°C Diameter 600 mm Height 2110 mm Weight 160 kg Connections 6 G1/2" connections 2 pcs. G2" connections 2 pcs. G1 1/4" connections 2 pcs.

Condition: good (used), Year of construction: 2021, REF: MM6468 1 x MKN FlexiChef 150L high-performance multifunctional cooking pan. Suitable for soups, stews, ready meals, meat, fish, rice and pasta, bakery and confectionery products. Manufacturer - MKN Maschinenfabrik Kurt Neubauer GmbH & Co KG. Type - FCEKMP133DR-G20037. Serial number – 21542551. Lredpfx Abszn Rbfjyju Date of manufacture – 2021. Electrical requirements - 380-415 V / 50 hz / 3 phase. Power - 34 kW. Water pressure - 200-600 kPa. Overall dimensions - 1600mm long x 910mm wide x 1020mm high. Machine weight - 390 kg.

Condition: new, Year of construction: 2026, The CORMAK TYTAN 210x520 conventional universal lathe + cutting tools is a professional metalworking lathe designed for precision machining of steel, aluminium and other engineering materials. Its compact design, solid machine bed and 6-speed gearbox ensure stable operation, high accuracy and a wide range of applications in workshops, toolrooms and small manufacturing facilities. CORMAK TYTAN 521 Universal Lathe – Precision Conventional Lathe for Professional Metalworking The CORMAK TYTAN 210x520 universal lathe has been designed for users who require a reliable machine for a wide range of turning operations. The machine's design allows both simple workshop operations and more demanding tasks related to one-off and small-batch production. The 6-speed gearbox allows the operator to easily adjust the spindle speed to the type of material being machined and the operation being performed. Mechanical gear shifting ensures stable operation, high durability and efficient use of the motor's power during turning. Main Advantages of the Machine 6-speed spindle gearbox allowing the appropriate operating parameters to be selected. 750 W / 230 V motor providing stable drive during machining. Compact and rigid construction reducing vibration during turning. Precision bed guides ensuring dimensional accuracy of machined components. Ability to cut both metric and imperial threads. Spindle with an MT3 taper and 21 mm spindle bore. 4-way tool post enabling quick tool changes. Right-hand and left-hand rotation. Spindle guard and chip tray improving safety and working comfort. Standard Equipment lathe stand, steady rest and follow rest, Set of 5 turning tools 125 mm 3-jaw chuck, right- and left-hand jaws, Lrsdoz Ayk Sjpfx Abysu gears for thread cutting, MT2 dead centre, grease gun, chip tray, chuck and tool post keys, open-ended and Allen keys, operating manual in Polish, CE Declaration of Conformity. Optional Equipment 4-jaw chuck, tool holders, live centres, turning tools, drill chucks for the tailstock. TECHNICAL SPECIFICATIONS Specification Value Swing over bed 210 mm Swing over cross slide 115 mm Distance between centres 520 mm Bed width 125 mm Headstock Spindle bore 21 mm Spindle nose taper MT3 Number of spindle speeds 6 Spindle speed range 140–1710 rpm Feed and Thread Cutting Number of metric threads 11 Metric thread range 0.4–3 mm Number of imperial threads 11 Imperial thread range 8–28 TPI Longitudinal feed range 0.05–0.2 mm/rev Cross Slide and Longitudinal Slide Tool post type 4-way Maximum tool post slide travel 70 mm Maximum cross slide travel 115 mm Maximum longitudinal slide travel 460 mm Tailstock Tailstock quill travel 45 mm Tailstock spindle taper MT2 Main Motor S1/S6 750 W / 1000 W / 230 V / 1 Ph / 50 Hz Dimensions Length 1150 mm Width 580 mm Height 550 mm Weight 120 kg

Condition: new, Year of construction: 2026, Efficient and precise CNC CORMAK C1325 BSP milling plotter, equipped with SERVO drives as standard, has a structure made of steel and cast iron, which ensures adequate rigidity and resistance to overloads arising during operation. It is designed for processing and cutting wooden materials, chipboards, MDF, OSB, plywood, PVC, plexiglass and dibond. For each machine, training is included in the price at our headquarters! Construction Welded steel rigid structure, The arms of the gate are made of hardened, thick, powder-coated sheet metal, which has increased stiffness, which translates into the quality of the processed detail. Workbench The work table was made in hybrid technology, It has T-slots for manual clamping material with dimensions of 1300 x 2500mm, Drive Engines used to drive high-power machine tools provide appropriate acceleration and speed in individual directions. The X and Y axes feature high-quality HIWIN toothed racks praised by users, which ensure high durability and precision, All axes move on rail guides. Machine equipped with tool height sensor Linear bearing: trapezoidal rails Spindle High quality spindle that is durable. Additionally equipped with an air cooling system The construction of the spindle uses high-quality sealed bearings, characterized by very quiet operation and guaranteeing increased durability. Tool height measurement sensor - included. Spindle speed range is 4,500 to 18,000 rpm. Tool clamping with 3 pcs ER32 collets, diameters 1/8", 1/2" and 5-6mm Software The machine is equipped with ARTCAM PRO software as standard Optional available: UCANCAM V11 CAD/CAM CNC software in Polish version The software enables quick and easy design of elements, which the program then converts into the so-called. G-code. It is also possible to import ready-made files from other programs. DSP control Digital Signal ProcessingDigital Signal Processing The DSP controller of the machine has its own processor and operating memory, which ensures trouble-free operation and simple operation of the machine. The driver ensures smooth operation of the device and accuracy in machining. There is no need to reinitialize the program after a power loss. The memory built into the controller allows the machine to work without having to load the program each time. Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 1300x2500mm Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software complete Power 400V Weight 980 kg Machine dimensions 2100x3100x2200mm Table height 715mm Guides linear Transfer toothed rack ATTENTION! Lsdpsiz A Ezjfx Abysru The machine is equipped with the function of remembering the last track of the G-code. In the event of a power failure or interruption, it restarts from the last point without losing time or material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. Check our offer on our website.

Condition: new, Year of construction: 2026, CORMAK S440R Metal Band Saw The professional CORMAK S440R semi-automatic metal band saw is an industrial-grade machine designed for precise and repeatable cutting of pipes, profiles, and solid materials. Its high power, heavy-duty construction, and fully automated operating cycle ensure reliable performance even under demanding conditions and in serial production. Main Advantages Semi-automatic operating cycle – hydraulic control of the vise and saw arm movement High 4.4 kW motor power enables cutting of difficult-to-machine materials Rigid cast-iron saw arm reduces vibrations and ensures high cutting precision Smooth band speed adjustment – 20–90 m/min (inverter-controlled) Lsdpfx Aoi Dx R Nebyjru Swiveling saw arm enables angled cutting from 60° to the left to 60° to the right Excellent ergonomics – separate control panel with LCD display and clear controls Construction and Technology The CORMAK S440R is based on a stable body and a cast-iron saw arm, which minimizes vibrations and improves cutting quality. The high-quality band drive, controlled by an inverter, allows the cutting speed to be adjusted to the type of material being processed. The 34 mm wide cutting band operates with carbide guide systems, ensuring durability and precision. Cutting Precision and Performance The cutting cycle is performed automatically: material clamping, band start-up, controlled lowering of the saw arm, stopping after the cut, and returning to the starting position. This solution significantly reduces operating time and minimizes errors resulting from manual operation. The angle reading system and arm position memory function support precise and repeatable cuts in serial production. Applications The machine is designed for cutting structural, tool, and stainless steels. It is ideal for cutting pipes, steel profiles, bars, and sections in metalworking shops, manufacturing plants, and tool rooms. It performs excellently in both serial and one-off production. Standard Equipment PLC controller Semi-automatic operating cycle Control console with LCD display Hydraulic control of the vise and saw arm (up/down) Saw arm position memory Digital cutting angle display Saw arm rotation: 60°L – 45°L – 0° – 45°R – 60°R Powered cleaning brush Closed-loop cooling system Bi-metal band saw blade Technical documentation + CE Declaration of Conformity Technical Specifications Minimum cutting diameter Ø5 mm Minimum material length in the vise 30 mm Distance from vise base to floor 780 mm Band dimensions 5200 × 34 × 1.1 mm Total power 4.4 kW Band speed 20–90 m/min Dimensions (L × W × H) 2500 × 1900 × 1450 mm Weight 1100 kg Looking for a reliable semi-automatic metal band saw? Choose the CORMAK S440R and rely on high performance, precision, and professional-grade quality.

Condition: new, Year of construction: 2026, DCV6500TC VIBER – Professional Industrial Dust Extraction System with Automatic Filter Cleaning and Heat Recovery The DCV6500TC VIBER is a modern industrial dust extraction system designed for intensive operation in woodworking and manufacturing facilities. It combines high performance, quiet operation, and energy-saving technologies. The unit is equipped with the VIBER system (automatic filter cleaning), TC technology (sound-insulated head housing), REHEAT system (heat recovery), and DAMAGE PROTECT (mechanical rotor protection). Main Advantages of the Machine Automatic VIBER filter cleaning system – effective filter cleaning without interrupting operation. REHEAT heat recovery system – recovers heat from exhaust air and improves thermal comfort. DAMAGE PROTECT system – protects key components against mechanical damage. Fully enclosed TC housing – reduces noise and vibrations during operation. High efficiency of 6500 m³/h – effective dust extraction from multiple workstations simultaneously. Large waste container capacity – 500 litres, reducing the frequency of emptying. Design and Technology The DCV6500TC VIBER has been designed for maximum reliability and long-term operation. The robust steel construction minimizes vibration transfer, while the dynamically balanced metal rotor ensures quiet operation and system stability. The specially designed fan blade geometry improves extraction efficiency while reducing energy consumption. The TC housing with acoustic insulation effectively lowers noise levels in the production area. Precision and Work Efficiency The filtration system, based on 32 polyester filters, captures particles down to 5 microns in size. For even higher filtration efficiency, optional HEPA filters can be installed. Quick-access waste containers and intuitive control via the electrical control cabinet improve operator comfort and increase overall productivity. Applications The DCV6500TC VIBER is an industrial-grade central dust extraction system designed for cooperation with machines such as: sanding machines, panel saws, edge banders, milling machines. It is ideal for continuous operation in manufacturing plants where air quality and the reliability of the extraction system are essential. Ledpfjuc U N Usx Abyoru Standard Equipment VIBER system – automatic filter cleaning TC insulated housing for noise reduction REHEAT heat recovery system DAMAGE PROTECT mechanical rotor protection Control cabinet with main switch Mobile waste containers with viewing windows – 2 × 250 L Technical Specifications Parameter Value Motor power S1 5.5 kW / 400 V, 50 Hz Motor speed 2900 rpm Extraction capacity 6500 m³/h Negative pressure 3000 Pa Noise level 80 dB Suction port diameter 280 mm Air velocity 28–32 m/s Filtration area 16 m² Filter material Polyester, 5 microns / filter category "G" Number of filters 32 Waste container capacity 2 × 250 L Dimensions (L × W × H) 2440 × 930 × 2270 mm Weight 440 kg

Condition: ready for operation (used), Year of construction: 2014, functionality: limited functionality, The Pfeiffer OnTool DryPump PDP100, with serial number 53005526 is an oil-free, multi-stage dry vacuum pump manufactured in November 2014. Manufacturer: Pfeiffer Vacuum Type: OnTool DryPump Serial Number: 53005526 Year of Construction: 11/2014 Electrical Requirements: 230 V, 3 Phase, 50/60 Hz Weight: 121 kg (approx. 267 lbs) Operation: Oil-free dry compression, commonly water-cooled for stable temperature control in industrial or semiconductor environments. Multi-stage roots vacuum pumps from Pfeiffer Vacuum+Fab Solutions operate with precisely engineered lobes that do not come into contact with each other or the housing. This design eliminates the need for lubricants in the compression chamber, ensuring dry and oil-free vacuum generation, which makes multi-stage roots vacuum pumps the perfect choice for a wide range of applications requiring clean vacuum such as semiconductor manufacturing, vacuum coating or chemical and pharmaceutical processes. Price 5.500 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. Lredpfx Aoz E Sgnsbysu

Condition: new, Year of construction: 2026, CORMAK CMS260 Multi-Function Machine The CORMAK CMS260 multi-function machine is an advanced 5-in-1 multifunctional machine combining the functions of a table saw, planer/thicknesser, spindle moulder and drill press. Designed to maximize functionality in a limited workspace, it is an ideal solution for professional woodworking shops, craftsmen and wood processing facilities looking for an efficient, precise and compact machine. Main Advantages of the CORMAK CMS260 5 functions in one machine – table saw, spindle moulder, drill press, planer and thicknesser. Three independent high-power motors – ensure continuous and efficient operation without compromise. Precision cutter block – equipped with three HSS knives, ideal for accurate surface finishing. Aluminium sliding fence – the triangular guide design increases cutting accuracy and repeatability. Saw blade angle adjustment from 0° to 45° – easy adjustment using a handwheel. Compact design – ideal for workshops with limited working space. CE compliance – complete technical and operating documentation (DTR) in Polish. Construction and Technology The CMS260 multi-function machine has been designed as a multifunctional woodworking machine in which the individual working modules operate independently, resulting in greater work efficiency and eliminating the need for additional adjustments. The machine is built on a solid steel base, ensuring stability even during intensive operation. Each function — including the table saw, planer/thicknesser, spindle moulder, etc. — has been optimized for operator safety and ergonomics. Protective guards, folding tables and an efficient dust extraction system all contribute to operator comfort and safety. Precision and Performance Thanks to the use of three separate motors (2.2 kW for the saw and planer, 1.5 kW for the spindle moulder), the machine enables intensive operation without a loss of torque. The spindle moulder offers four spindle speed settings (1,400, 4,000, 6,000 and 9,000 rpm), allowing the operating parameters to be optimally adjusted to the type of material being processed. Standard Equipment 254 mm diameter saw blade Cutter block with three HSS knives Aluminium sliding fence Folding planer tables Folding chip guard, Ø100 mm Optional Equipment Drill chuck (available for PLN 1,490 gross) Technical Specifications Table Saw Lredpsv R Td Eofx Abyeu Maximum saw blade diameter 254 mm Saw blade arbor diameter 30 mm Saw blade speed 4,000 rpm Saw blade tilting angle 0° to 45° Maximum cutting height at 0° to 45° 78 (63) mm Motor power 2.2 kW Power supply 400 V Planer / Thicknesser Cutter block diameter 70 mm Number of knives 3 pcs. Cutter block speed 5,500 rpm Feed rollers 32 mm Maximum planing width 260 mm Maximum planing depth 3 mm Fence tilting angle 0° to 45° Maximum thicknessing width 258 mm Maximum workpiece height in thicknesser mode 225 mm Maximum thicknessing depth 4 mm Feed speed 7 m/min Motor power 2.2 kW Main table size 920 × 410 mm Sliding table 238 × 1320 mm Dust extraction pipe diameter 100 mm Spindle Moulder Spindle diameter 30 mm Spindle speed 1,400 / 4,000 / 6,000 / 9,000 rpm Spindle clamping length 105 mm Maximum spindle travel 110 mm Maximum table opening 160 mm Motor power 1.5 kW

Condition: new, Year of construction: 2026, CORMAK TS-125 The CORMAK TS-125 is a precision tool grinder designed for comprehensive sharpening and reconditioning of cutting tools. It enables the machining of drills, cylindrical milling cutters, lathe tools and many other tools. Its solid construction, wide range of adjustments and extensive standard equipment make it a machine designed for intensive use in industrial plants, tool rooms and maintenance workshops. Main Advantages of the Machine Universal application – grinding of twist drills, milling cutters, lathe tools and cylindrical surfaces. Precise adjustment – swiveling grinding head adjustable in two planes: +40°/-40° vertically and +50°/-50° horizontally. Stable construction – a massive base effectively dampening vibrations, ensuring high grinding quality. Drive unit with a 3-jaw chuck (Ø80 mm) – enables machining of cylindrical surfaces and rotary components. Twist drill sharpening range: Ø5–32 mm – ideal for most tools used in industry. Ledpfjvugynex Abyjru Longitudinal travel of 320 mm and cross travel of 170 mm – a large machining range with the machine's compact dimensions. Complete standard equipment – readiness to work with various types of tools without the need for additional purchases. Construction and Technology The CORMAK TS-125 tool grinder has been designed with the highest possible stability and structural rigidity in mind. The worktable with a surface area of 535 × 130 mm and precise guidance ensures smooth movement along both axes. The grinding head, driven by a motor with a power of 0.18 kW and a speed of 2,800 rpm, can be adjusted in two planes, which enables grinding at any angle. Thanks to the use of holders and arbors with different diameters, it is possible to precisely mount various types of tools. Precision and Work Efficiency The machine provides high repeatability and sharpening precision even during serial production and intensive use. The appropriate geometry of the guideways, the quality of the components and the set of grinding wheels (including ring and diamond grinding wheels) enable the achievement of cutting-edge surfaces with a high-quality finish. A milling cutter grinder and drill sharpener in a single machine body is a solution that eliminates the need to invest in multiple separate machines. Standard Equipment Stable base with a tool cabinet 2 tailstocks for positioning the workpieces Table travel stops – precise control of the travel range 2 standard 60° centers and 2 half-centers, 60° 3 grinding wheels: ring grinding wheel 125 × 45 × 32 mm, diamond grinding wheel 125 × 32 × 32 mm, conventional grinding wheel 125 × 25 × 32 mm Grinding disc Drive unit with a 3-jaw chuck (Ø80 mm) Twist drill sharpening attachment Lathe tool holder Arbors for mounting milling cutters: Ø16, Ø22, Ø32 mm Diamond sharpening stone Complete set of operating tools Technical Specifications Maximum workpiece diameter — 175 mm Distance between centers — 320 mm Table size — 535 × 130 mm Longitudinal table travel — 320 mm Cross table travel — 170 mm Grinding head – vertical inclination — -40° to +40° Grinding head – horizontal inclination — -50° to +50° Grinding head speed — 2,800 rpm Motor power — 0.18 kW Weight — 266 kg

Condition: new, Year of construction: 2026, PREMIUM VERSION MODELS are characterized by high rigidity and maximum resolution precision, operating with full interpolation on each axis: X, Y, and Z. Lrsdeycuycjpfx Abyju Digital Signal Processing (DSP) ensures digital signal processing for smooth machine operation and high machining accuracy. The plotter with a working area of 1220 × 1230 mm provides stable and precise performance. The controller’s built-in memory allows the machine to operate without the need to reload the program each time. The spindle design incorporates high-quality machine bearings, characterized by very quiet operation and increased durability. Training at the CORMAK headquarters is included with every machine. Technical specifications Spindle: 3.7 kW / 18,000 rpm, inverter-driven, air-cooled Working area: 1200 × 1200 × 210 mm Control system: DSP Programming resolution: 0.001 mm Power supply: 400 V Weight: 450 kg Machine dimensions: 2000 × 1800 × 1640 mm Table height: 715 mm Guideways: linear Drive transmission: rack and pinion (Z-axis – ball screw) Software: UCanCAM V13 software, Polish language version (optional) IMPORTANT! The machine is equipped with a G-code path memory (resume function). In the event of a failure or power outage, it resumes operation from the last point without loss of time or material. CNC Milling Machine CORMAK C1212 PREMIUM (1200 × 1200) Standard equipment Leveling feet Bolts Wrenches Training cutter set ER32 collets – 1/8 inch, 1/2 inch, and 5–6 mm Unloading and positioning of the machine are the customer’s responsibility. The power plug must be provided by the customer due to different socket types (16A / 32A). Optional equipment (net prices) UCanCAM V13 software, Polish language version – PLN 1,190.00 UCanCAM V13 PRO software, Polish language version – PLN 3,190.00 Commissioning and training at the customer’s site – PLN 3,000.00 CE-compliant safety barriers (price per side) – PLN 600.00 CE-compliant laser light curtains – PLN 6,300.00 Warranty extension by 12 months – +15% of the net machine price Warranty extension by 24 months – +30% of the net machine price Warranty extension by 36 months – +45% of the net machine price

Condition: new, functionality: fully functional, Year of construction: 2026, CORMAK GF1500 PROFESSIONAL CHAIN TRENCHER – POWER, PRECISION AND PRODUCTIVITY The CORMAK GF1500 Chain Trencher is a professional machine designed for digging narrow trenches for cables, pipes, irrigation systems, water supply lines, drainage systems, and other underground utilities. Thanks to its precision, high working speed, and compact dimensions, it can easily operate close to fences, buildings, and other obstacles, even in confined areas with very hard or compacted soil. Key Features and Advantages Powerful 15 HP engine – delivers high cutting chain traction for efficient operation in hard and compacted ground. Precise trench dimensions – digging depth up to 600 mm with a trench width of 100 mm. Heavy-duty cutting system – the chain is equipped with 27 carbide-tipped teeth, allowing it to cut through roots and small stones with ease. Excellent manoeuvrability – the balanced design and compact dimensions make the machine easy to operate in narrow gateways, gardens, and confined working areas. Heavy-duty industrial frame – manufactured from thick-walled steel profiles with a durable powder-coated finish for maximum resistance to mechanical damage and corrosion. Operator safety – equipped with protective guards and ergonomically positioned controls for safe and comfortable operation. Applications It is specifically designed for creating straight, clean, and narrow trenches for: Electrical cables Fibre optic cables Water pipes Gas pipelines Drainage systems Irrigation installations Machine Specifications Specification Value Trenching Width 100 mm Trenching Depth 150 / 300 / 450 / 600 mm Number of Teeth 27 carbide-tipped teeth Chain Length 2,000 mm Lrsdpevzqk Refx Abysu Maximum Chain Speed 550 m/min Tyres 145/70-6 Machine Height 1,100 mm Machine Length 2,100 mm Machine Width 720 mm Machine Weight Approx. 175 kg Engine Specifications Specification Value Engine Type 4-stroke OHV, air-cooled Engine Displacement 420 cm³ Rated Power 9.0 kW (12.24 HP) Maximum Engine Power (EPS*) 15 HP Starting System Manual recoil starter Cylinder Cast-iron sleeve Cylinder Bore 90 mm Stroke 60 mm Maximum Engine Speed 3,600 rpm Fuel Tank Capacity 6.5 L Engine Oil Capacity 1.1 L Dry Engine Weight 31 kg Engine Dimensions (L × W × H) 499 × 370 × 433 mm *EPS – Effective Power Solutions Engine Features OHV technology – provides optimum performance, longer engine life, and improved fuel efficiency. Lo-Tone PRO muffler – significantly reduces operating noise for quieter performance. Dual air filtration system – protects the engine from airborne contaminants, extending service life. Automatic governor – maintains stable engine speed and delivers consistent power under demanding working conditions. Cast-iron cylinder sleeve – improves durability, wear resistance, and oil control. Dual ball bearings – increase engine durability and extend service life. Float-type carburettor – ensures precise fuel delivery for easier starting and reduced fuel consumption. High torque output – delivers greater pulling power and improved digging performance. Protective spoil guard – shields the operator from excavated material thrown by the digging chain. The CORMAK GF1500 combines powerful performance, precision trenching, and robust construction, making it an ideal choice for demanding professional applications in construction, utilities, and landscaping.

Condition: new, Year of construction: 2026, CORMAK 400 metal lathes is a new, improved version of the popular metal processing lathes. Among other things, the tool holder cover, spindle bearing system, new digital readout have been improved. They are suitable for production plants, workshops and tool shops. They are perfect for unit and small lot production. NEW, IMPROVED MODEL !!! high-quality and reinforced spindle bearing system new guards system compliant with CE standards the latest model of digital axis reading reinforced and modernized lathe base with drawers for tools and an extendable chip tray Characteristics of the machine Ljdpfsiz Tczsx Abyjru REINFORCED, RIBBED SURFACE OF THE LATHE'S BED PROVIDES MAXIMUM REDUCTION OF VIBRATION, ADDITIONALLY PRECISE GRINDED, HARDENED BED DIGITAL READOUT OF THE AXIS IN STANDARD EQUIPMENT LARGE SPINDLE BORE PROVIDES OPTIMUM PERFORMANCE 52 mm THE APPROPRIATE BED WIDTH ENSURES STABLE AND PRECISE WORKING CONDITIONS MACHINE EQUIPPED WITH HIGH-QUALITY AND HARDENED SPINDLE BEARING SYSTEM EFFICIENT MACHINING THANKS TO TWO AUTOMATIC FEEDS AND EQUIPMENT WITH A ROLLER AND A DRAFT BOLT HARDENED WHEELS IN THE SPINDLE GEAR ADJUSTABLE CLUTCH OVERLOADS ON THE PULL SHAFT POSSIBILITY TO MACHINE THE FULL RANGE OF THREADS WITHOUT REPLACING THE WHEELS IN THE GUITAR FEED CHOICE LOCK: THROUGH SCREW OR SHAFT THE REMOVABLE BRIDGE ENABLES THE WORKING OF ELEMENTS WITH AN INCREASED DIAMETER RETRACTABLE CHIP DRAWER AND TOOL DRAWERS FOR BETTER AND EFFICIENT WORK Technical data MAXIMUM TURNING DIAMETER 400 mm MAXIMUM TURNING DIAMETER OVER THE BED 250 mm MAXIMUM TURNING DIAMETER IN THE SELECTION OF THE BRIDGE 520 mm TURNING LENGTH IN DEAD CENTRES 1000 mm BED WIDTH 218 mm SPINDLE END CAMLOCK D5 SPINDLE CONE MK6 SPINDLE BORE 52 mm SPINDLE ROTATION RANGE 65-1810 rpm SPINDLE SPEED NUMBER 16 ranges RANGE OF LONGITUDINAL FEED (40) 0,053 - 1,291 mm RANGE OF TRANSVERSE FEED (40) 0,011-0,276 mm THE MAXIMUM DIMENSION OF THE TOOL 20 mm x 20 mm METRIC THREAD 0,4-7 mm INCH THREAD 4-60 T.P.I. MODULAR THREAD (22) 0,4-3 mm THREAD D. P. (28) 8-84 D. P. TAILSTOCK QUILL DIAMETER 50 mm TAILSTOCK QUILL STROKE 110 mm TAILSTOCK TAPER MT4 ENGINE POWER 2,2 kW PUMP POWER 0,1 kW WEIGHT 640 kg DIMENSIONS 2000x820x1650 mm EQUIPMENT digital readout steady rest follow rest 200 mm 3-jaw chuck 200 mm 4-jaw chuck face plate 280 mm dead center MK4 x 2 reduction sleeve MK6/MK4 keys Factory new machine, under warranty For more information you can visit our web page.