Used Codema Automatic Bending Machine for sale (75,332)

Condition: excellent (used), Year of construction: 2020, Composition: • Stainless steel mixing tank with agitator • Additive tank with pump • 5 solid material feeders (flour, rye, etc.) • Horizontal screw mixer • Integrated CIP cleaning system • Complete sanitary piping system • Process pump • Full electrical panel with recipe control Power supply: 380-400V Documentation available Bjdpfxjyyv I Do Aqtsli

Condition: used, Year of construction: 2009, printing size 75x105cm, parallel lift, moving printing bed, with gripper system and belt delivery to the right, infinitely adjustable squeegee stroke, with pneumatic squeegee pressure control, screen frame insertion from the front, with pneumatic squeegee clamping, control panel with keyboard (useable on the left or on the right side), max. sheet size: 78x108cm, max. screen frame size: 120x140cm, additional with cleaning unit model TEKNEK, completely with 3sets squeegees and floodbars, connection: 380/400V, 50Hz, compressed air 6bar necessary. Used, year of construction: 2009, will partly be overhauled and will then be technically and optically in mint condition. Bledpfx Aqeyu Tu Aotji

Condition: used, Year of construction: 1986, tube diameter 4-20 mm wall strength 2 mm bending radius min. 10 mm bending radius max. 75 mm bending speed 35 mm/min pull up length of tube 2000 mm Bsdpfjwbi Hcox Aqtoli total power requirement 7,5 kW weight of the machine ca. 1,1 t dimensions ca. 3100x1000x1400 mm

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 6 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Bljdpfx Ajy T H N Ssqtei Lifting height of the upper beam and material thickness can be preselected via dip switch Mechanical adjustment of the bending arm with digital display (setting of sheet thickness) Manual rear stop with spring fingers up to 1500 mm 5700 kg

Year of construction: 2005, condition: used, Tube bending machine. Bjdpozdb H Ejfx Aqtsli

Condition: new, Year of construction: 2026, Bending machine ZB 70/3 H NC Zopf - semiautomatic - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable Blsdefkz Rbjpfx Aqtoi - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Year of construction: 2024, condition: as good as new (ex-display), Stierli bending machine 120HE Horizontal bending machine, with bending force of 12 tons tool height 130 mm stroke 0-170 mm bending capacity for flat steel 130x12 mm pipe bending for steel pipes up to 1 1/2" Blodoid Izgepfx Aqtji capable of performing minor straightening operations demonstration machine, year of manufacture 2024

Year of construction: 2020, condition: as good as new (ex-display), Roll bending machine with spindle feed and 3 driven rollers. Features: Shaft diameter: 40 mm Working position: Horizontal/Vertical with support Connection: 230V/1 phase with inverter Dimensions (W x H x D): 700 x 1460 x 600 mm Weight: 180 kg Performance: Round tube: 70 x 1.5 mm Square tube: 50 x 50 x 3 mm Round bar: 35 mm Flat bar: 50 x 10 mm Angle iron: 50 x 50 x 6 mm Bljdpfx Aegi N Aleqtei Scope of delivery: CE40M3D Universal roll set for profiles Accessories (including control panel with foot control, operating manual) 1 set of plastic rollers for round tubes, 1 1/2" for work with reduced marking.

Year of construction: 2024, condition: as good as new (ex-display), Stierli bending machine 420HE Horizontal bending machine, with bending force of 42 tons tool height of 200 mm stroke of 0-310 mm, stepless Bedpfx Aqjid Izkjtoli bending capacity of 200x24 mm St40 straightening capacity for HEB180 Bending and straightening program via selector switch Exhibition machine, year of manufacture 2024, incl. hand-held control and foot pedal Wear-resistant machine table Machine in new condition

Condition: new, saw blade diameter 400 mm Number of revolutions 3000 r.p.m hole of sawblade 32 mm sawblade width 4 mm Control NC total power requirement 1,5-2 kW weight of the machine ca. 162 kg required space 740 x 780 x 1350 mm The Gerd Wolff AC 400 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories -BLocation points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw Blodpjy S Dwwofx Aqtoi - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air pistol Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: excellent (used), Year of construction: 2013, controller manufacturer: ELFRAN Digital Read Out, number of rollers: 3, shaft diameter: 130 mm, overall weight: 5,800 kg, total length: 2,200 mm, total width: 2,400 mm, total height: 2,000 mm, Profile bending machine Bljdpfx Aqsyrq Dvstsi FACCIN - RCMI 130 MACH-ID 9451 Make: FACCIN Type: RCMI 130 Control: ELFRAN Digital Read Out Year: 2013 3 rolls driven 2 lateral guide rolls Digital readout for position rolls Set hardned universal rolls Set hardned profile rolls Horizontal and vertical:|Horizontal and Vertical Shaft Ø: 130mm Number of rolls: 3 Capacity flat: 240 x 30 x 1000mm Capacity Tube: 140 x 5 x 1500Ø x mm Capacity bar: 80 x 80 x 900mm Capacity T-Profile: 140 x 15 x 1400mm Capacity HEA-Profile: 160 x 1700mm Working speed: 0 - 6000mm/min. Side supports: 2 x Hydraulic side arms Length: 2200mm Width: 2400mm Height: 2000mm Weight: 5800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1999, overall weight: 2,900 kg, total length: 1,800 mm, total width: 1,900 mm, total height: 2,200 mm, Length:1800mm Bledpfx Aqjycu E Estsi Width:1900mm Height:2200mm Weight:2900kg

Condition: excellent (used), Year of construction: 2008, control type: CNC control, controller manufacturer: ESA TOUCH PANEL, pipe length (max.): 4,000 mm, bending radius (max.): 180 mm, bending radius (min.): 10 mm, overall weight: 3,700 kg, total length: 6,000 mm, total width: 1,800 mm, total height: 1,800 mm, Tube bending machine Transfluid - DB630 A3 CNC MACH-ID 9616 Make: Transfluid Type: DB630 A3 CNC Control: ESA TOUCH PANEL Year: 2008 Max.Tube Ø: 30mm Min. Tube Ø: 4mm Blsdpfx Aqsy N Rv Istoi Max. Wall thickness:4mm Max. Bending radius:180mm Min. Bending radius:10mm Max. bending length:4000mm 3e dimsion bending:Yesmm/min. Number of tools: 10,12,15,16,18,20,22,28 Length: 6000mm Width: 1800mm Height: 1800mm Weight: 3700kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Blsdpfx Aewpku Dsqtei Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: good (used), Manufacturer: Tracto Technik Type: TUBOMAT Year of construction: 1996 Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device Machine mobile and flexible to use Specifications Metric US Standard Max. Product Ø 42 mm Min. product Ø 6 mm Max. Wall thickness 3 mm Max. Bending radius 5 mm Min. bending radius 180 mm Max. Bending length 2000 mm Deburring device Bsdpfx Ast Dk Ukoqtoli Yes Sage device Yes Flanging device Yes Dimensions (estimate) Length 3500 mm width 1000 mm height 1200 mm weight 1000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 2022, Adjustable stroke with digital read out positioning display Variable adjustable pressure Quick change tool system Table length: 1250 mm Table width: 660 mm Max. working pressure: 30 tons Max. stroke: 235 mm Max. workpiece weight: 250 mm Stroke adjustable: 0 - 235 mm Working speed: 10,000 mm/min Return speed: 20,000 mm/min Power: 3 kW Flat capacity: 200 x 24mm x mm Tube capacity: 60 x 4Ø x mm Solid capacity: 40 x 40mm Length: 1250 mm Width: 700 mm Bljdpfx Aqewrzmvstsi Height: 1200 mm Weight: 1050 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, pipe diameter (max.): 42 mm, pipe length (max.): 3,000 mm, bending radius (max.): 180 mm, wall thickness: 3 mm, Pipe bending machine with electric control, 4-fold bending angle pre-selection and digital display  Hydraulic bending drive operated by hand lever valve Hydraulic bending drive, operated by hand lever valve Follower-type pressure die (sliding guide) Hydraulic mandrel retraction Pipe circular saw with coolant lubrication and automatic feed 6 mandrels up to 24 mm included x 3000 mm Pipe deburring unit for internal and external deburring Hydraulic power unit as basic seating for attaching a cutting ring assembly or flaring device  Machine mobile and flexible to use Max. tube Ø: 42mm Bledsuccw Hjpfx Aqtji Min. tube Ø: 6mm Max. Wall thickness: 3mm Max. Bending radius:5mm Min. bending radius:180mm Max. bending length:3000mm Deburring attachment:Yes Sawing attachment: Yes Flair attachment: Yes Length: 3500mm Width: 1000mm Height: 1200mm Weight: 1000kg

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm width 3200 mm height Bljdpfsvd Dftjx Aqtei 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 1988, Press brake, bending machine, swing bending machine, die bending machine -Handover: in its current condition as inspected -Function: Manual operation (no automatic operation) -Manufacturer: RAFAMET Swivel bending machine type KM-4 -Drive: mechanical -Max. working width: 2020 mm -Max. sheet thickness: 4 mm -Stop depth: 750 mm Blsdpfx Aqev Tpxqetsi -Connected power: kW -Dimensions: 3350/1540/H1510 mm -Weight: 3900 kg

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Oberwange swivelable Bsdpfeq T Ud Ssx Aqtsli Bending angle adjustable via potentiometer Lift height preselectable via scale Manual and automatic bending mode possible Weight: approx. 650 kg

Condition: excellent (used), I am offering a SANPACK FIX pallet wrapping machine designed for securing loads with stretch film during storage and transport. Technical specifications: Manufacturer: Sanpack Model: SANPACK FIX Power supply: 3×380V + N + PE Frequency: 50 Hz Power: 0.55 kW Rated current: 2.0 A Protection rating: IP54 Advantages: Rotating pallet table Stretch film holder Robust industrial construction Control panel operation Ideal for warehouses, production facilities, and logistics centers Visual condition matches the photos. The machine is used. Bjdpfxozf Rkuo Aqtjli

Condition: used, functionality: fully functional, Hydraulic mandrel tube bending machine Complete bending sets with bending mandrels and bending shoes: Ø 18, 20, 22, 25, 2 x 30 + 35 mm Additional bending mandrels without bending shoes: Ø 28, 2 x 38 + 42 mm Blodpfxjwnrt Se Aqtsi Pre-assembly device with hydraulic cylinder Hydraulically driven deburring unit for tubes, inside and outside, from 6 - 48.3 mm Max. tube feed length: 3000 mm Machine weight: approx. 700 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, machine/vehicle number: 007803, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes Blsdpfeyhbhwex Aqtsi

Condition: good (used), Year of construction: 2018, machine/vehicle number: 431-92, Offer 26142 Technical data: - Cutting range at 90°: round 350 mm - Cutting range at 90°: flat 320 x 460 mm - Miter angle adjustable from 90° to 30° - Cutting range at 45°: round 280 mm - Cutting range at 45°: flat 350 x 280 mm - Cutting range at 45°: round 180 mm - Material feed system - Material support height approx. 740 mm - Saw band dimensions 4350 x 34 x 1.1 mm - Cutting speed adjustable from 25 to 90 m/min - Hydraulic lifting and lowering of the saw frame - Cutting pressure continuously adjustable - Material clamping device - 3 roller conveyors, total length 1400 mm - 1 roller stand - Total motor power 400 V / 4.8 kW - Space requirement approx. W 1400 x H 1400 x D 2200 mm Bledpfx Aszc Izasqtsi - Weight approx. 1900 kg

Condition: excellent (used), For sale: professional pallet strapping system from the renowned German company ErgoPack. Model 725E is a fully electric device that facilitates safe and fast pallet strapping without the need for bending down – ideal for warehouses, logistics, and production environments. KEY ADVANTAGES - Automatic strap guiding around the pallet Bodpoyw Iagofx Aqteli - 24V electric control - AUTO, MANUAL, SOFT operation modes - Adjustable strap tension - Maximum tensioning force up to 2500N - Ergonomic handling for operator comfort - Mobile, wheeled construction - Swiss quality craftsmanship (Swiss Made components) TECHNICAL DATA Manufacturer: ErgoPack Deutschland GmbH Model: 725E Power supply: 24V DC Max strap tension: 2500N Condition: used, in good technical condition Charger included CONDITION The device is complete. Shows normal signs of use from operation. Control panel works, the machine is ready for use. APPLICATIONS - Warehouses - Logistics centers - Production - Pallet transport and packaging