Used Cable Pull 0.5 Ton for sale (12,100)

Condition: used, Year of construction: 2010, Manufacturer: Richter Lunetten Type: Prism Block 10-3 Year of manufacture: 2010 Min diameter 50 mm Max diameter 400 mm Work load each unit 10 Ton Height adjustment 100 mm Prism angle 120 degrees New price EUR 60,000 Specifications Metric US Standard There are (still) no specifications for this machine. Dimensions (Estimate) Length 1200 mm Width 800 mm Height 800 mm Weight 800 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract terms. We recommend you check all important details. Iedowrq Szopfx Aa Ieic

Condition: good (used), Year of construction: 2018, Manufacturer: INDUCTAFLEX Type: AL-3e Control system: ACCURATE touch screen Year of construction: 2018 3 rolls driven servo Torq each roller 3500 nM Electrically support rolls Intelligent software : Ellipse program U Bend shapes control of tangents Auto section detector Specifications Metric US Standard Horizontal and Vertical Horizontal Axis Ø 105 mm Number of rollers 3 Stroke X axis 0 - 400 mm Dimensions (estimate) length 4500 mm Iedpfx Ajvd Dftsa Ijic width 3200 mm height 2700 mm weight 3300 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), mileage: 1,134,000 km, power: 551 kW (749.15 HP), first registration: 04/2012, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: engine braking, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: air, Year of construction: 2012, Equipment: air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, trailer coupling, = Additional options and equipment = - Brake booster - Low noise - Speed limiter - Refrigerator - Air suspension - Radio/CD player - Reversing camera - Sun visor - Auxiliary heater - Toolbox - Xenon lighting - PTO (Power Take-Off) - Central lubrication - Towing hitch = Further information = Front axle 1: Steering Front axle 2: Suspension: Air suspension Ijdpfxsut Drho Aa Isic Rear axle 1: Suspension: Air suspension Rear axle 2: Lift axle; Steering; Suspension: Air suspension Body brand: HMF Pump: Yes Technical condition: very good Optical condition: very good

Condition: used, mileage: 226,000 km, power: 115 kW (156.36 HP), first registration: 01/2017, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, loading space length: 5,000 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, MERCEDES-BENZ ATEGO 816 | REFRIGERATED BOX | THERMO KING T 600R | TAIL LIFT 1.5 TON | AIR CONDITIONING — Vehicle Data — - Transmission: Automatic - Suspension: Leaf spring front/rear - Differential lock - Tire size: 215/75 R17.5 Cab & Equipment: - Air conditioning - Cruise control - Multifunction steering wheel - Reversing camera - Active lane departure warning system Iodpfx Aajy Ikgko Isic Refrigerated Body: - Manufacturer: Kießling Fahrzeugbau - Refrigeration unit: Thermo King T-6100 - Deep freeze capability down to -27 °C - Cooling shelves installed - Loading area length approx. 5.00 m - Internal height approx. 2.20 m - Internal width approx. 2.48 m - Right-hand side door Tail Lift: - Manufacturer: MBB Palfinger - Lifting capacity 1,500 kg Body & Doors: - Rear portal (double wing doors) - Right-hand side door - Rear tail lift The vehicle is ready for immediate use and is ideal for food, deep freeze, or fresh produce logistics. — EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 — EXPORT REGISTRATION, CUSTOMS EXW WITHIN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATE, AND 17-21 DAYS AUSTRIA LICENSE PLATE EURO 1 VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID! For sales to EU and third countries, a security deposit of at least €500.00 / €1,000.00 will be charged. Modifications, errors and prior sale reserved. You will find more vehicles on our homepage. Sale is exclusively in accordance with our general terms and conditions – see homepage. Important Note – Important Information: Despite careful checking of all details in our offer, errors may occur. Some errors result from transmission errors between the systems of different platform providers. Thus, all information is given without guarantee and does not constitute a legal claim. Legal Notice: This advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is information for the initiation of a contract. The details provided here are without guarantee and do not represent assured characteristics.

Condition: used, mileage: 599,705 km, power: 156 kW (212.10 HP), first registration: 04/2016, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 02/2026, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2016, Equipment: ABS, electronic stability program (ESP), tail-lift, DAF LF 210 THERMO-KING V 500 MAX DEEP FREEZE TAIL LIFT 1.5 TON 6.20 M LONG ----VEHICLE HISTORY * FROM FIRST OWNER * GERMAN VEHICLE * VIDEO AVAILABLE ON REQUEST VEHICLE FEATURES * AUTOMATIC TRANSMISSION * ENGINE BRAKE * CRUISE CONTROL * THERMO KING V 500 MAX * ROOF HATCH (MANUAL) * TAIL LIFT 1.5 TON * LANE KEEPING ASSIST * HILL START ASSIST * TRACTION CONTROL * DPF REGENERATION SYSTEM * PERMISSIBLE TOTAL WEIGHT: 7,490 KG * UNLADEN WEIGHT: 5,570 KG * PAYLOAD: 1,920 KG * TIRE SIZE: 205 / 75 R17.5 * TECHNICAL INSPECTION VALID UNTIL: 2 / 2027 * CARGO COMPARTMENT DIMENSIONS: * LENGTH: 5M * HEIGHT: 2.3M Iedpfswpn H Rox Aa Ioic * WIDTH: 2.47M * WHEELBASE: 3.9M * DOLLANDA TAILGATE LIFT * ALL TYRES IN GOOD CONDITION

Condition: used, Year of construction: 1986, operating hours: 3,710 h, Equipment: all wheel drive, SCHAEFF MINI EXCAVATOR ZRH 16 QUICK CHANGER READY FOR USE ----VEHICLE EQUIPMENT Iiedjv Hvuxspfx Aa Isc * TYPE: ZRH 16 * 3.3 T PERMISSIBLE TOTAL WEIGHT * 1986 YEAR OF CONSTRUCTION * QUICK CHANGER * READY FOR USE IMMEDIATELY * NO SHOVEL AVAILABLE * EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ ---EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 30 DAYS LICENSE PLATE AND 17 - 21 DAYS AUSTRIAN LICENSE PLATE EURO 1 VEHICLE RESERVATIONS PLEASE ONLY USE THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID! For sales to the EU and third countries a deposit of at least ¤ 500.00 / ¤ 1,000.00 will be charged (For sales to the EU and third countries will be levied deposit/guarentee of at least ¤ 500.00 / ¤ 1000.00) Subject to changes, errors and advance sales! You can find more vehicles on our homepage: Sales are made exclusively in accordance with our terms and conditions - see homepage Important note? Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not represent a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: used, mileage: 452,000 km, power: 160 kW (217.54 HP), first registration: 03/2012, fuel type: diesel, overall weight: 11,900 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro5, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,400 mm, Year of construction: 2012, Equipment: ABS, electronic stability program (ESP), tail-lift, MERCEDES-BENZ ATEGO 1222 L REFRIGERATOR BOX THERMO-KING T-600 R LBW 1.5 TON ----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE ON REQUEST * THERMO-KING T-600 R * DIESEL: 12843 h * ELECTRICITY: 51h VEHICLE EQUIPMENT * AUTOMATIC * ENGINE BRAKE * CRUISE CONTROL * MBB BEAR 1.5 TON FOLDABLE UNDER * DIFFERENTIAL LOCK * HILL START ASSIST * KIESLING STRUCTURE * ALUMINUM FLOOR * 5 CM WALL THICKNESS * MULTIFUNCTION STEERING WHEEL * HANDS-FREE SYSTEM * COMFORT SEATS * SEAT HEATING * ROOF HATCH * ELECTRIC WINDOW LIFT * ELECTRIC EXTERIOR MIRROR * FRONT AXLE LEAF SUSPENSION * REAR AXLE AIR SUSPENSION * ROOF SPOILER * LOADING AREA INFORMATION * 7.30 M LONG * 2.48 M WIDE * 2.40 M HIGH * PERMISSIBLE TOTAL WEIGHT: 11900 KG * EMPTY WEIGHT: 8,050 KG * PAYLOAD: 3,850 KG * TIRE SIZE: 265 / 70 R 19.5 * ALL TIRES IN GOOD CONDITION * AVAILABLE IMMEDIATELY Iiedpfx Aaov Ar Hij Isc ---- * EXPORT SALE ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ * EXPORT SALES ONLY WITH DEPOSIT MIN. 500¤ - 2000¤ ---- EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (AUTHORIZED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS LICENSE PLATE AND 15 DAYS AUSTRIAN LICENSE PLATE EURO 1 TECH. DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS PLEASE ONLY VIA THE E-MAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to EU & third countries a deposit of at least 500.00 ¤ / 1,000.00 ¤ charged (For sales to the EU and third countries will be levied deposit/guarentee of at least ¤ 500.00 / ¤ 1000.00) Subject to changes, errors and advance sales! You can find more vehicles on our Sales are made exclusively in accordance with our terms and conditions - see homepage Important note - Important information: Despite careful checking of all details in our offer, errors may creep in. These are sometimes caused by transmission errors in the systems of the various platform providers. We would therefore like to point out that all information is provided without guarantee and does not represent a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of Section 145 of the German Civil Code (BGB). Rather, it is information for the initiation of a contract. The information provided here is without guarantee and therefore does not represent any guaranteed properties.

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data: Bending force: 600 tons bending length: 6050 mm passage between the uprights: 5100 mm stroke: 365 mm Installation height: 700 mm Projection: 510 mm table height: 990 mm table width: 154 mm Y High speed: 80 mm Y Working speed: 7 mm/sec. Y retraction speed: 80 mm/sec. X axes working speed: 350 mm/sec. R axes working speed: 300 mm R Axes travel distance: 250 mm X axis distance: 750 mm Engine power: 55 kW length: 8050 mm width: 3200 mm height: 4250 mm Weight: 72000 kg Iiedpfjfir U Njx Aa Isc Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC ModEva15T Servo motor backgauge & linear guided ball screw system (X-R) CNC Crowning European type tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard electrical equipment according to worldwide standard Optional equipment Control unit - ModEva Premium , 69T and 66T CE Manuel F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M Motorised + FPSC (Safety PLC) CE BLVT safety - only for tandem machines Z1, Z2 Axes X1, X2 Axes Bil0h3uvee R1, R2 Axles Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm - rear protection with light barrier AP3-AP4 Bending aid Height-adjustable laser angle measurement

Condition: new, Year of construction: 2024, Are you looking for a powerful press brake that can meet even the most demanding requirements? Then the Durma AD-S 803000 press brake with 3000 tons of pressure could be the perfect solution for your needs. With an impressive length of 8 meters and a stroke of 750 mm, this machine is capable of processing even large and heavy materials with the highest precision. The installation height of 1000 mm allows flexible and comfortable positioning of the workpiece. The heart of the machine is the DELEM-DA 66T movable control system, which ensures intuitive operation and precise control of the workflow. In addition, the press brake is a special design and can be configured according to customer requirements to meet all individual needs. If you are interested in Durma press brake, we are at your disposal for personal consultation. Other machines are also available and can be visited. Feel free to contact us for more information and let's find a customized solution for your needs together. Control type: DELEM DA-66T Protection oil: suitable for sea transport Front safety system: FPSC (MANUEL) Sheet metal support system: sliding support arm Stroke: 750 MM Backgauge type: X=1500 X, R Overhang:1050 MM Crowning: Hydromechanical Installation height: 1000 MM Power: 400V 50HZ Iisdpfei Da Syjx Aa Isc Body type: Welded frame Under tool holder: DURMA Wide

Condition: new, Year of construction: 2024, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. AD-R 80400 Bending force: 400 tons bending length: 8050 mm With more than 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally renowned manufacturers in their sector, whose products are sold in 120 countries. Iijdpfxjfin N Ss Aa Ijc With the branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here here we are your direct contact person from the ranks of Durmazlar, who will competently assist you with advice and practical support when it comes to machines for sheet metal processing. Our demonstration centre gives you the opportunity to get an overview of our machines on site, to be convinced of the quality and precise technology of our products at first hand and to receive the best possible advice that is geared to your company goals. It is our task to be your direct contact person for you, our customer, on site and to offer you services in the areas of training and customer service. We are now happy to accompany you from Germany - from advice, through the purchase and di

Year of construction: 2022, condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number). Magni boom with winch JW2000 / 2 tons / suitable for RTH & TH series / year of manufacture: 2022 / DEMO unit / in stock & immediately available Price: €6,990.00 net / €8,318.10 gross - Max. load capacity: 2,000 kg - Length: 2,390 mm - Rope diameter: 10 mm - Working length of rope: 25,000 mm - Rope payout speed: 24 m/min - Automatic attachment recognition: yes - Lattice boom with integrated winch - Lattice boom construction made of tubular profiles with an optimal weight/performance ratio - Winch with pressure roller and hydraulic end switch for reeling in/out the rope This attachment is suitable for the RTH and TH series. Product code: ATT-04-015 We have many other Magni attachments in our warehouse that are immediately available! Mr. Herden (tel. number) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Iiodpozb Ugmsfx Aa Iec We supply the complete Magni range for you! Errors and prior sale excepted! Internal ID: 019995 = Further information = New: No Intended use: Construction Please contact Marius Herden for further information.

Condition: excellent (used), Year of construction: 2022, Tamutom 1 ton in 24 hour flaked ice machine with holding bin Ijdpfx Asy E Irxea Ioic

Condition: used, mileage: 235,283 km, power: 350 kW (475.87 HP), axle configuration: 4x2, color: blue, driver cabin: sleeper cab, gearing type: automatic, suspension: air, total width: 25,500 mm, total height: 36,600 mm, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, - Brake system For vehicle inquiries, Mr. Seidel will be happy to assist you (by phone). Ijdpfx Aajy D Dm Ns Ioic Mercedes-Benz Actros 1848 L 4x2 skip loader Body: Meiller AK 12.T, radio remote control, axle, wheel mounting track, narrow, front axle 8.0 t, front axle cranked design, rear axle with 440 crown wheel, hypoid, 13.0 t, rear axle with active lubrication, unregulated, axle ratio i = 2.611, electronic braking system with ABS and ASR, heater, electronic air supply unit, electronic air supply and control, medium, disc brakes on front and rear axles, electronic parking brake, secondary oil retarder, condensate monitoring for compressed air system, steel compressed air tank, additional compressed air tank, trailer brake, 2-line, brake connections left, trailer stability assist (TSA), trailer brake connection rear, Duo-Matic + standard, frame overhang 1500 mm, wheelbase 4000 mm, one-circuit steering, stabilizer front axle, additional stabilizer rear/trailing axle, smoker package, compressed air connection in cab, driver's air-sprung comfort seat, co-driver function seat, seat backrest release, driver's seat, lower comfort bed, PremiumComfort mattress lower, seat cover velour, shaving mirror, curtain across bed(s), LED ambient lighting for driving and living, electric stationary air conditioning, automatic climate control, residual heat utilization, hot water auxiliary heater cab, additional thermal insulation, storage compartment lids driver and co-driver side, drawer under ledge, storage compartments above windshield, electric sliding/tilting glass sunroof, low seat box, lowered by 40 mm, pre-installation for upper comfort bed, wide, high load parameter level 2, regulated alternator 24-30 V/150 A, AGM batteries 2 x 12 V/220 Ah, maintenance-free, circuit breakers, auxiliary socket 12 V/15 A in co-driver footwell, power socket 24 V/25 A in co-driver footwell, socket 24 V/15 A in right-hand sidewall compartment, night drive light switch, 24 V trailer socket, 15-pin, reverse warning system, cable remote control for air suspension, L-cab StreamSpace, 2.30 m, tunnel 170 mm, comfort steel-cushioned cab suspension, exterior storage compartment lid left, exterior storage compartment lid right, exterior sun visor transparent, A-pillar trim, tinted windshield, heated front mirror, main mirror with maneuvering position passenger side, air horns cab roof, plastic corner bumper, center bumper part with towing eyes, door extension, driver cab access left/right, fixed, central locking system, comfort central locking, light sensor, rain sensor, economy/power driving program, Predictive Powertrain Control, transmission G 281-12/14.93-1.0, single disk clutch, Mercedes PowerShift 3, air suspension rear axle, digital tachograph 2nd generation, ADR, tachograph manufacturer VDO, two-way speakers, aux-in right-hand sidewall compartment, navigation system, CB radio 24 V, multimedia cockpit interactive, Remote Online, main fuel tank left, 390 L tank left, 650 x 700 x 1000 mm, aluminum, AdBlue tank 75 L left, lockable tanks, protective cap for AdBlue dosing system, exhaust system with tailpipe to right side, lighting according to UN-R 48.06, Bi-Xenon headlights, LED daytime running lights, automatic high/low beam and cornering lights, halogen fog lights, lower work lights, headlamp cleaning system, undershield against dust turbulence, torque increase in...

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, lifting height: 6,000 mm, load capacity: 3,200 kg, DEMAG EKDR 3 complete trolley with hoist and travel motor, including all cables / festoon cable trolley / power supply lead / control switch (see last photo) Year of manufacture: 2007, Reeving 4/1, Gear ratio i=67, Load capacity 3200 kg, Lifting speed 6 m/min and 1 m/min Very good condition Many trolleys in stock, also available in other sizes Iijdpfx Aajyyu S Uj Iec

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, overall weight: 5,770 kg, total length: 15,050 mm, load capacity: 12,500 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: double-girder – Capacity: 12,500 kg – Lifting height: 6 m – Year of manufacture: 2018 – Hoist type: steel wire rope – FEM/ISO hoist: 1Am / M4 Dimensions – Span: 15,050 mm centre-to-centre – Installation height: 970 mm – Width of wheel set incl. buffers: 3,370 mm – Wheelbase: 2,700 mm – Suitable for crane rail: 50×30 mm – Total weight: 5,770 kg (of which trolley 846 kg) Speeds – Hoisting: 5/0.8 m/min – Trolley travel: 20/5 m/min – Crane travel: 40/10 m/min Specifications – Control: Abus radio control, including spare transmitter – Crane manual available: yes – Dismantled: yes, available immediately Iiodpfx Aey T Hfgja Ioc – Hour meter: 306 hours (as of 26/6/2025) – Last service: 26 June 2025 – Condition: in very good condition, well maintained

Year of construction: 2026, condition: new, ‼️BLACK FRIDAY OFFER‼️ RECEIVE A €500 DISCOUNT WHEN YOU COMPLETE YOUR PURCHASE‼️ OFFER VALID UNTIL SATURDAY, 29.11.2025‼️ We have shredders and other recycling machinery in stock in Heilbronn for all types of recycling. From copper recycling to plastic recycling, you can purchase all machines from us. Feel free to inquire. ‼️CAN BE INSPECTED ON SITE‼️ We would be happy to demonstrate the machine to you live in Leingarten! By appointment only! We are based in Heilbronn—a German company, operating under German laws, with warranty and service! We also speak English! Professional copper recovery from cables ranging from 1.5mm to 120mm made easy! ➡️Supplied with accident prevention certification (UVV) from a German company Our cable stripping machine Josan S120! ▶️Weight approx. 236 kg This allows you to recycle cables quickly and cost-effectively and obtain pure copper. Very high processing speed. Powerful 3 kW motor. Built for durability. View detailed images of the machine or inspect it live at our site in Leingarten (by appointment only). Net price: €3,999.00 +19% VAT: €759.81 Gross price: €4,758.81 Since we also do recycling ourselves, we can demonstrate our machines to you by appointment. CE-certified machines from us. ‼️For further questions, please contact us! Iedpfx Aep E Einsa Ijic We can only respond if you provide your name, address, email, and telephone number. Otherwise, your inquiry may be filtered as spam. We will get in touch and provide you with preliminary advice!‼️ Specifications/features/prices subject to change. Errors excepted.

Year of construction: 2026, condition: new, We also offer leasing and financing options. Please feel free to contact us! ‼️ATTENTION‼️ There are currently machines being offered on various platforms from China. Most CE markings are counterfeit. These machines are not EU-compliant. Their electrical configuration is also not approved for use in Germany. Several customers contacted us asking how to extract copper from such a machine, as all they got was shredded cable mixture. We tested these machines ourselves two years ago, and the customers are correct—these machines do not yield pure copper. These machines are not permitted for operation in Germany! Buy from us and make use of our expertise—see the machines for yourself at our Heilbronn facility. We provide long-term support and always help you to separate top-quality copper. Your Josan & Söhne Team! German quality, CE certified, EU-compliant, and available for live demonstration—not just edited or cut videos. We strongly recommend buying locally here in Germany. German guarantees, local laws, fixed prices, and German-language support in case of future issues. You get all this only with machines purchased from us. You're welcome to inspect our quality in person by appointment. Remember, videos can be edited. We offer live demonstrations‼️ We stock shredders and other recycling machinery for all recycling needs at our Heilbronn location! From copper recycling to plastics recycling—you can purchase all the necessary machines from us. Just ask! ‼️INSPECTION AT OUR FACILITY POSSIBLE‼️ Our compact model works just as perfectly as our larger machines, only smaller and more affordable. Top-grade copper granulate. Can be used in any garage. Approx. 20-30 kg input per hour. From stranded cables, extension cords, automotive cables, telephone cables, NYM cables—our machines can recycle it all! Josan Cable Granulator E30 We are happy to demonstrate the machine live in Heilbronn! Appointments only! We are based in Heilbronn as a German company, subject to German laws, with warranty and service! We also speak English! ‼️For further questions, please get in touch! We can only respond if you contact us with your name, address, email, and phone number. Any other inquiries may be filtered as spam. We will get back to you and provide preliminary advice! Here is our entry-level model: ➡️With 380 V ➡️For cable diameters approx. 0.1–30 mm Iodpfx Ajp E Efyja Ioic ➡️Power approx. 4.2 kW ➡️Input approx. 20–30 kg/h ➡️Weight approx. 310 kg ➡️Dimensions approx. 88×74×173 cm ➡️With UVV (accident prevention regulation) executed by our German company With this machine, you can process cables into copper granulate. We also offer larger systems and accessories such as hydraulic cable cutters, electric motor breakers, triple-separators, etc. Complete solutions for cable recycling. When you buy from us, you also buy our service! This is extremely important, especially with these machines! Please note: our service applies only to machines and accessories purchased from us. With our know-how and our machinery, you will reliably produce copper granulate—not unseparated material. Net price 8,999.00€ +19% VAT 1,709.81€ Gross price 10,708.81€ Our machines are CE-certified. Subject to errors. Images, prices, and features may differ.

Year of construction: 2026, condition: new, ‼️NEW FEATURE – NOW WITH SIEMENS TOUCH SCREEN‼️ For improved operation and control! Leasing is also available! Always with linear monthly payments and no increased final installment! Term 36 months. Rate factor 3.0694% Term 48 months. Rate factor 2.3697% Term 60 months. Rate factor 1.9456% IMPORTANT‼️ Currently, there are machines from China being offered on various platforms. Most CE certificates are counterfeit, and there is no EU conformity. The electrical systems are also usually not compliant with German regulations. Several clients have contacted us, asking how it’s possible to obtain copper from these machines, as they only get shredded cable mixtures. Based on our own tests two years ago, we can confirm that these machines do not produce clean copper. Such machines are not permitted for use in Germany! German quality, CE certified with EU conformity, and available for live demonstration. We recommend buying locally here in Germany: German warranties, German laws, fixed prices, and German-speaking support in case of problems – all only with machines purchased from us. You are welcome to arrange a site visit to see our quality in person. Live demonstrations available! For all recycling needs, we have shredders and other recycling machinery in stock in Heilbronn! Here is our new, unique machine – a world exclusive, only available from us in Heilbronn. Water-cooled system. Very efficient, clean copper granulate: 99.7% purity. We are a German company operating under German law. Excellent quality with warranty and service. Our German-speaking skilled workers, all certified, can assist you at any time. We have our own trucks, service vans, and offer prompt support and advice. See for yourself on site – don’t just decide based on pictures or videos. We granulate ourselves and can demonstrate this live. S300 with water cooling and fan – developed and assembled in Germany by us. With our equipment, you can also separate radiator copper: Input: ➡️ Copper-aluminum radiators Iijdpfx Aaop E Efco Ioc Output: ➡️ Separated copper and aluminum. Any iron parts and screws are separated via magnetic belt as their own fraction (pre-shredder required). Since we use our own machines for copper recycling, our systems are continuously modernized, optimized for long service life, and constantly improved. Maintenance, spare parts, modifications, and upgrades are provided by our trained staff! From stranded wire, extension cables, automotive cables, telephone cables, NYM cables – recycle it all with our machines! Granulation Plant S300 ➡️ For cables from 0.1–40mm ➡️ Up to approx. 250 kg/h input – meaning, with 50% copper content in the cable, you can recover 5kg of 99.7% pure copper granulate from 10kg of input, which can be sold at premium prices. ➡️ Total connected load: 24 kW ➡️ Including separation tables ➡️ 380-volt connection ➡️ UVV compliant, implemented by a German company ➡️ Conveyor belts included ➡️ Magnetic belt included (for steel separation) ➡️ Transport can be organized From €24,999.00 net +19% VAT €4,748.81 Gross €29,748.81 Subject to errors and prior sale.

Condition: as good as new (ex-display), Horstmann SEW Elevator Cable Winch RA2467 Technical data: Frame dimensions: 1380x100x600 mm (HxLxW) Winch diameter: Ø = 450 mm (1420 mm circumference) Steel rope thickness: 10 mm Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 7.5 S1 Rope length: 14200 mm (14.2 m) Speed (v m/s): 0.54 Pulling force: 11600 N /1160 kg Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Iiedpfxeyi Im Nj Aa Ioc

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 9,855 h, load capacity: 5,000 kg, lifting height: 6,800 mm, free lift: 1,960 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 3,200 mm, DGUV certified until: 06/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, air conditioning, cabin, full service history, lighting, seat heater, sideshift, Linde H 50 D Evo diesel forklift with the following specifications: Lifting capacity: 5,000 kg Lifting height: 6,800 mm Overall height: 3,200 mm Year of manufacture: 2021 Operating hours: 9,855 Fully equipped Linde 5.0-ton diesel forklift with a full cab and heater, air conditioning, 4-cylinder engine, new front and rear tires (to be fitted), triplex mast with full free lift, mini-lever, side shifter, 4th valve, two-pedal control, fork length 1,200 mm. Iodpoy Rh Ecefx Aa Isic Includes 1,000 hours of service according to LINDE manufacturer's specifications (with a new timing belt and new water pump) and a valid UVV inspection. Additional attachments such as a fork positioner, rotating device, etc., or other fork lengths are available upon request. We would be happy to arrange a viewing, demonstration, and test drive by telephone appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. We can deliver your new forklift cost-effectively using our own ramp-based low-loader (transport costs upon request). Further information and offers can be found on our website.

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 8,454 h, load capacity: 3,000 kg, lifting height: 3,950 mm, free lift: 150 mm, fuel type: diesel, construction height: 2,700 mm, DGUV certified until: 06/2027, fork length: 1,200 mm, Equipment: CE marking, UVV, cabin, full service history, lighting, sideshift, Linde H 30 D-01 Diesel Forklift with the following specifications: Operating hours: 8,454 Lifting capacity: 3,000 kg Lift height: 3,850 mm Overall height: 2,700 mm Year of manufacture: 2011 LINDE 3.0 ton diesel forklift with full cabin, good front tires - new rear tires, clear-view telescopic mast, side-shift, mini-lever controls, dual-pedal operation, front and rear lighting, fork length 1,200 mm. Including 1,000-hour service according to LINDE manufacturer specifications (with new timing belt and new water pump) and valid safety inspection (UVV test). The following options are available for an additional charge: - Cosmetic refurbishment - Different fork length Inspection, demonstration, and test drive available by prior telephone appointment. Sale exclusively to commercial customers. Subject to prior sale, errors, and typing mistakes. Iisdpfxjy Rh Dxj Aa Isc Your new forklift can be delivered cost-effectively with our own ramp low-loader (transport costs on request). For more information and offers, please visit our website.

Condition: used, Double-acting hydraulic cylinder, MAE, suitable for MAE hydraulic press, type HY-DSF 160. Flange cylinder, ideal for workshop press. Machine year of manufacture: 1970 Cylinder No.: 6017 Cylinder stroke: approx. 600 mm Operating pressure: 320 bar Piston rod: Ø 220 mm Piston diameter: Ø 250 mm Cylinder pressing force at 325 bar: approx. 160 tons Cylinder diameter: 255 / 370 / 390 mm Overall length with piston rod retracted: approx. 1350 mm Piston rod extension: 70 mm - Hydraulic connection thread G 1 1/2" - Flange connection on the cylinder base, inner diameter approx. 118 mm, outer diameter 165 mm, 6x M36 threaded holes, pitch circle 215 mm - Thread in the piston rod M20, pitch circle 160 mm - Mounting nut on the cylinder tube, outer diameter 418 mm Weight: 915 kg The hydraulic cylinder is used and comes from a warehouse clearance. Isdpfx Aasy Tptae Ijic

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport wagon: Industrial trailer with 2-axle turntable steering -Platform: 3000/1500/H545 mm -Load capacity: 3.5 t -Tires: 75x305/400 -Drawbar: reversible, double-sided trailer coupling Quantity: 1 piece available Iiodpfxst U Ttkj Aa Iec -Overall dimensions: 4730/1500/H545 mm -Weight: 470 kg

Condition: ready for operation (used), Year of construction: 1997, Bottle washing machine, model Pac CB 12-0.5-V-7 L II Iiedpfx Aaszcgn Eo Isc Year of manufacture: 1997 Capacity: 6,000 bottles/hour

Condition: like new (used), Year of construction: 2016, pressing force: 400 t, passage width 2500 mm stroke 900 mm Total power requirement 62 kW machine weight approx. 27,5 t dimensions L x W x H approx. 3950 x 2200 x 4850 mm retraction force 40 t Main cylinder 2 pieces column diameter 220 mm installation height 1300 mm table size 2500 x 1600 mm ram size 3100 x 16000 mm table height above floor approx. 900 mm forward speed 200 mm/sec Iiodpfx Aoin Et Noa Ijc return speed 200 mm/sec working speed 5 - 15 mm/sec oil tank 1500 l oil quantity 1200 l pressure control adjustable from up to 50 - 400 t thermoforming cushion 1400 x 800 mm thermoforming unit capacity 30 - 60 t deep drawing cushion stroke 250 mm thermoforming cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low maintenance and reliable piston rod with induction hardening and chrome plating T-slots according to customer requirements, if not specified 22mm according to DIN CE certificate manufactured according to EU standards operating instructions, technical documentation, documentation in German language engineering steel LCG ASTM A36 T-slots in table and ram according to DIN 650-22 Travel control adjustable via monitor Light sensors front + rear: Sick 1300mm Hydraulic components Bosch Rexroth Monitor Siemens 12 inch Electrical control box for wall mounting Interior of the press illuminated with LEDs Hydraulic block monitored by safety PLC Energy control system: Reduction of the idle consumption of the pump to approx. 2 kw Remote control for remote maintenance Two-hand operation on movable stand Further information: Pressure build-up up to 400 T within max. 4 seconds after closing the die. Left side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Right side of the press closed by door 1000 x 800 mm with cross bars Ø 20 mm Operation of the press can be manual, semi-automatic or fully automatic